Binary Organic Solar Cells with over 19 % Efficiency and Enhanced Morphology Stability Enabled by Asymmetric Acceptors.

The simultaneous improvement of efficiency and stability of organic solar cells (OSCs) for commercialization remains a challenging task. Herein, we designed asymmetric acceptors DT-C8Cl and DT-C8BTz with functional haloalkyl chains, in which the halogen atoms could induce noncovalent interactions with heteroatoms like O, S, and Se, etc., thus leading to appropriately manipulated film morphology. Consequently, binary devices based on D18: DT-C8Cl achieved a champion power conversion efficiency (PCE) of 19.40 %. The higher PCE of D18: DT-C8Cl could be attributed to the enhanced π-π stacking, improved charge transport, and reduced recombination losses. In addition, the noncovalent interactions induced by haloalkyl chains could effectively suppress unfavorable morphology evolutions and thereby reduce trap density of states, leading to improved thermal and storage stability. Overall, our findings reveal that the rational design of asymmetric acceptors with functional haloalkyl chains is a novel and powerful strategy for simultaneously enhancing the efficiency and stability of OSCs.

End-Group Engineering of Chlorine-Trialkylsiylthienyl Chain-Substituted Small-Molecule Donors for High-Efficiency Ternary Solar Cells.

Ternary architecture has been widely demonstrated as a facile and efficient strategy to boost the performance of organic solar cells (OSCs). However, the rational design of the third component with suitable core and end-group modification is still a challenge. Herein, two new small-molecule (SM) donors BT-CN and BT-ER, featuring the identical conjugated backbone with distinct end group, have been designed, synthesized, and introduced into the PM6:Y6 binary system as the second donor. Both molecules exhibit complementary absorption and good miscibility with PM6, contributing to the nanofibrous phases and strong face-on molecular packing. Importantly, the incorporation of BT-CN/BT-ER has significantly facilitated charge collection and transportation with remarkable suppression of carrier recombination. As a result, ternary OSCs with 20 wt% BT-CN/BT-ER achieved a PCE of 16.8%/17.22% with synchronously increased open-circuit voltage (VOC ), short-circuit current density (JSC ) and fill factor (FF). Moreover, replacing Y6 with L8-BO further improves the PCE to 18.05%/18.11%, indicating the universality of both molecules as the third component. This work demonstrates not only two efficient SM donors with 4,8-bis(4-chloro-5-(tripropylsilyl)thiophen-2-yl) benzo[1,2-b:4,5-b']dithiophene (BDTT-SiCl) as the core but also end group modification strategy to fine-tune the absorption spectrum, molecular packing, and energy levels of SM donors to construct high-performance ternary OSCs.

Unraveling the Role of Non-Fullerene Acceptor with High Dielectric Constant in Organic Solar Cells.

Increasing the relative dielectric constant is a constant pursuit of organic semiconductors, but it often leads to multiple changes in device characteristics, hindering the establishment of a reliable relationship between dielectric constant and photovoltaic performance. Herein, a new non-fullerene acceptor named BTP-OE is reported by replacing the branched alkyl chains on Y6-BO with branched oligoethylene oxide chains. This replacement successfully increases the relative dielectric constant from 3.28 to 4.62. To surprise, BTP-OE offers consistently lower device performance relative to Y6-BO in organic solar cells (16.27% vs 17.44%) due to the losses in open-circuit voltage and fill factor. Further investigations unravel that BTP-OE has resulted in reduced electron mobility, increased trap density, enhanced first order recombination, and enlarged energetic disorder. These results demonstrate the complex relationship between dielectric constant and device performance, which provide valuable implications for the development of organic semiconductors with high dielectric constant for photovoltaic application.

A Polyfluoroalkyl-Containing Non-fullerene Acceptor Enables Self-Stratification in Organic Solar Cells.

The elaborate control of the vertical phase distribution within an active layer is critical to ensuring the high performance of organic solar cells (OSCs), but is challenging. Herein, a self-stratification active layer is realised by adding a novel polyfluoroalkyl-containing non-fullerene small-molecule acceptor (NFSMA), EH-C8 F17 , as the guest into PM6:BTP-eC9 blend. A favourable vertical morphology was obtained with an upper acceptor-enriched thin layer and a lower undisturbed bulk heterojunction layer. Consequently, a power conversion efficiency of 18.03 % was achieved, higher than the efficiency of 17.40 % for the device without EH-C8 F17 . Additionally, benefiting from the improved charge transport and collection realised by this self-stratification strategy, the OSC with a thickness of 350 nm had an impressive PCE of 16.89 %. The results of the study indicate that polyfluoroalkyl-containing NFSMA-assisted self-stratification within the active layer is effective for realising an ideal morphology for high-performance OSCs.

A Facile Synthesized Polymer Featuring B-N Covalent Bond and Small Singlet-Triplet Gap for High-Performance Organic Solar Cells.

High-efficiency organic solar cells (OSCs) largely rely on polymer donors. Herein, we report a new building block BNT and a relevant polymer PBNT-BDD featuring B-N covalent bond for application in OSCs. The BNT unit is synthesized in only 3 steps, leading to the facile synthesis of PBNT-BDD. When blended with a nonfullerene acceptor Y6-BO, PBNT-BDD afforded a power conversion efficiency (PCE) of 16.1 % in an OSC, comparable to the benzo[1,2-b:4,5-b']dithiophene (BDT)-based counterpart. The nonradiative recombination energy loss of 0.19 eV was afforded by PBNT-BDD. PBNT-BDD also exhibited weak crystallinity and appropriate miscibility with Y6-BO, benefitting of morphological stability. The singlet-triplet gap (ΔEST ) of PBNT-BDD is as low as 0.15 eV, which is much lower than those of common organic semiconductors (≥0.6 eV). As a result, the triplet state of PBNT-BDD is higher than the charge transfer (CT) state, which would suppress the recombination via triplet state effectively.

Designing a Novel Wide Bandgap Small Molecule Guest for Enhanced Stability and Morphology Mediation in Ternary Organic Solar Cells with over 19.3% Efficiency.

In this study, a novel wide-bandgap small molecule guest material, ITOA, designed and synthesized for fabricating efficient ternary organic solar cells (OSCs) ITOA complements the absorbance of the PM6:Y6 binary system, exhibiting strong crystallinity and modest miscibility. ITOA optimizes the morphology by promoting intensive molecular packing, reducing domain size, and establishing a preferred vertical phase distribution. These features contribute to improved and well-balanced charge transport, suppressed carrier recombination, and efficient exciton dissociation. Consequently, a significantly enhanced efficiency of 18.62% for the ternary device is achieved, accompanied by increased short-circuit current density (JSC), fill factor (FF), and open-circuit voltage (VOC). Building on this success, replacing Y6 with BTP-eC9 leads to an outstanding PCE of 19.33% for the ternary OSCs. Notably, the introduction of ITOA expedites the formation of the optimized morphology, resulting in an impressive PCE of 18.04% for the ternary device without any postprocessing. Moreover, the ternary device exhibits enhanced operational stability under maximum power point (MPP) tracking. This comprehensive study demonstrates that a rationally designed guest molecule can optimize morphology, reduce energy loss, and streamline the fabrication process, essential for achieving high efficiency and stability in OSCs, paving the way for practical commercial applications.

Sensitive Organic Photodetectors With Spectral Response up to 1.3 µm Using a Quinoidal Molecular Semiconductor.

Detecting short-wavelength infrared (SWIR) light has underpinned several emerging technologies. However, the development of highly sensitive organic photodetectors (OPDs) operating in the SWIR region is hindered by their poor external quantum efficiencies (EQEs) and high dark currents. Herein, the development of high-sensitivity SWIR-OPDs with an efficient photoelectric response extending up to 1.3 µm is reported. These OPDs utilize a new ultralow-bandgap molecular semiconductor featuring a quinoidal tricyclic electron-deficient central unit and multiple non-covalent conformation locks. The SWIR-OPD achieves an unprecedented EQE of 26% under zero bias and an even more impressive EQE of up to 41% under a -4 V bias at 1.10 µm, effectively pushing the detection limit of silicon photodetectors. Additionally, the low energetic disorder and trap density in the active layer lead to significant suppression of thermal-generation carriers and dark current, resulting in excellent detectivity (Dsh *) exceeding 1013 Jones from 0.50 to 1.21 µm and surpassing 1012 Jones even at 1.30 µm under zero bias, marking the highest achievements for OPDs beyond the silicon limit to date. Validation with photoplethysmography measurements, a spectrometer prototype in the 0.35-1.25 µm range, and image capture under 1.20 µm irradiation demonstrate the extensive applications of this SWIR-OPD.

Short-Wavelength Infrared Organic Light-Emitting Diodes from A-D-A'-D-A Type Small Molecules with Emission beyond 1100 nm.

Short-wavelength infrared (SWIR) organic light-emitting diodes (OLEDs) have attracted great interest due to their potential applications in biological imaging, infrared lighting, optical communication, environmental monitoring, and surveillance. Due to an intrinsic limitation posed by the energy-gap law, achieving high-brightness in SWIR OLEDs remains a challenge. Herein, the study reports the use of novel A-D-A'-D-A type small molecules NTQ and BTQ for high-performance SWIR OLEDs. Benefiting from multiple D-A effect in conjugated skeleton, the small molecules NTQ and BTQ exhibit narrow optical gaps of 1.23 and 1.13 eV, respectively. SWIR electroluminescence (EL) emission from OLEDs based on NTQ and BTQ is achieved, with emission peaks at 1140 and 1175 nm, respectively. Not only owing to a negligible efficiency roll-off across the full range of applied current density but also the ability to afford a high operation current density of 5200 mA cm-2 , the resultant SWIR OLEDs based on NTQ exhibit a maximal radiant exitance of =1.12 mW cm-2 . Furthermore, the NTQ-based OLEDs also possess sub-gap turn-on voltage of 0.85 V, which is close to the physical limits derived from the generalized Kirchhoff and Planck equation. This work demonstrates that A-D-A'-D-A type small molecules offer significant promise for NIR/SWIR emitting material innovations.

Balancing the Efficiency and Synthetic Accessibility of Organic Solar Cells with Isomeric Acceptor Engineering.

With the continuous development of organic semiconductor materials and on-going improvement of device technology, the power conversion efficiencies (PCEs) of organic solar cells (OSCs) have surpassed the threshold of 19%. Now, the low production cost of organic photovoltaic materials and devices have become an imperative demand for its practical application and future commercialization. Herein, the feasibility of simplified synthesis for cost-effective small-molecule acceptors via end-cap isomeric engineering is demonstrated, and two constitutional isomers, BTP-m-4Cl and BTP-o-4Cl, are synthesized and compared in parallel. These two non-fullerene acceptors (NFAs) have very similar optoelectronic properties but nonuniform morphological and crystallographic characteristics. Consequently, the OSCs composed of PM6:BTP-m-4Cl realize PCE of 17.2%, higher than that of the OSCs with PM6:BTP-o-4Cl (≈16%). When ternary OSCs are fabricated with PM6:BTP-m-4Cl:BTP-o-4Cl, the averaged PCE value reaches 17.95%, presenting outstanding photovoltaic performance. Most excitingly, the figure of merit (FOM) values of PM6:BTP-m-4Cl, PM6:BTP-o-4Cl, and PM6:BTP-m-4Cl:BTP-o-4Cl based devices are 0.190, 0.178, and 0.202 respectively. The FOM values of these systems are all among the top ones of the current high-efficiency OSC systems, revealing high cost-effectiveness of the two NFAs. This work provides a general but accessible strategy to minimize the efficiency-cost gap and promises the economic prospects of OSCs.

Mastering morphology of non-fullerene acceptors towards long-term stable organic solar cells.

Despite the rapid progress of organic solar cells based on non-fullerene acceptors, simultaneously achieving high power conversion efficiency and long-term stability for commercialization requires sustainable research effort. Here, we demonstrate stable devices by integrating a wide bandgap electron-donating polymer (namely PTzBI-dF) and two acceptors (namely L8BO and Y6) that feature similar structures yet different thermal and morphological properties. The organic solar cell based on PTzBI-dF:L8BO:Y6 could achieve a promising efficiency of 18.26% in the conventional device structure. In the inverted structure, excellent long-term thermal stability over 1400 h under 85 °C continuous heating is obtained. The improved performance can be ascribed to suppressed charge recombination along with appropriate charge transport. We find that the morphological features in terms of crystalline coherence length of fresh and aged films can be gradually regulated by the weight ratio of L8BO:Y6. Additionally, the occurrence of melting point decrease and reduced enthalpy in PTzBI-dF:L8BO:Y6 films could prohibit the amorphous phase to cluster, and consequently overcome the energetic traps accumulation aroused by thermal stress, which is a critical issue in high efficiency non-fullerene acceptors-based devices. This work provides insight into understanding non-fullerene acceptors-based organic solar cells for improved efficiency and stability.

Toward High-Efficiency Organic Photovoltaics: Perspectives on the Origin and Role of Energetic Disorder.

The power conversion efficiency of organic photovoltaics is strongly limited by relatively large energy loss, which is partially due to the disordered nature of organic semiconductors. This disordered nature not only hinders the rational design of molecules with excellent photophysical properties but also prevents a more thorough understanding of the inherent link between microscopic parameters and physical phenomena. In this Perspective, we demonstrate that the injection-dependent emission line-shape in organic semiconductors is primarily associated with a state-filling effect, where the extent of spectral blue-shift can be a strong indicator for energetic disorder. Molecular geometry with rigidity and coplanarity not only promotes preferential face-on stacking that narrows the energetic distribution of subgap states but also impedes torsional deformations of the conjugated backbone away from planarity, thereby facilitating larger π-electron delocalization. These structural characteristics explain the seemingly contradictory high radiative efficiency of low-bandgap nonfullerene molecules, providing promising molecular design strategies to realize high-efficiency organic photovoltaics.

An electron acceptor featuring a B-N covalent bond and small singlet-triplet gap for organic solar cells.

BNTT2F, an electron acceptor featuring a B-N covalent bond and singlet-triplet gap as low as 0.20 eV via the multiple resonance effect, is developed for organic solar cells. The optimized device based on BNTT2F offered an efficiency of 8.3%, suggesting the great prospect of B-N covalent bond-containing π-conjugated molecules for photovoltaics.

Novel Oligomer Enables Green Solvent Processed 17.5% Ternary Organic Solar Cells: Synergistic Energy Loss Reduction and Morphology Fine-Tuning.

The large non-radiative recombination is the main factor that limits state-of-the-art organic solar cells (OSCs). In this work, two novel structurally similar oligomers (named 5BDTBDD and 5BDDBDT) with D-A-D-A-D and A-D-A-D-A configuration are synthesized for high-performance ternary OSCs with low energy loss. As third components, these PM6 analogue oligomers effectively suppress the non-radiative recombination in OSCs. Although the highest occupied molecular orbital (HOMO) levels of 5BDTBDD and 5BDDBDT are higher than that of PM6, the oligomers enabled ultra-high electroluminescence quantum efficiency (EQEEL ) of 0.05% and improved VOC , indicating suppressing non-radiative recombination overweighs the common belief of deeper HOMO requirement in third component selection. Moreover, the different compatibility of 5BDTBDD and 5BDDBDT with PM6 and BTP-BO4Cl fine-tunes the active layer morphology with synergistic effects. The ternary devices based on PM6:5BDTBDD:BTPBO4Cl and PM6:5BDDBDT:BTP-BO4Cl achieve a significantly improved PCEs of 17.54% and 17.32%, representing the state-of-the art OSCs processed by green solvent of o-xylene. The strategy using novel oligomer as third component also has very wide composition tolerance in ternary OSCs. This is the first work that demonstrates novel structurally compatible D-A type oligomers are effective third components, and provides new understanding of synergetic energy loss mechanisms towards high performance OSCs.

Reduced Energy Loss in Non-Fullerene Organic Solar Cells with Isomeric Donor Polymers Containing Thiazole π-Spacers.

Large energy loss is one of the key factors that limit the power conversion efficiency (PCE) of organic solar cells (OSCs). In this work, we report reduced energy losses of OSCs via introducing thiazole π-spacers with different orientations to replace the thiophene π-spacers of the prototype polymer PBDB-T. The newly formed thiazole-containing isomeric polymers, PBDBTz-2 and PBDBTz-5, exhibited blue-shifted absorption and deeper lying energy levels compared to PBDB-T. When blended with IT-4F, the two polymers realized PCEs of 10.4% for PBDBTz-2 and 9.6% for PBDBTz-5, respectively, which were higher than that of PBDB-T (PCE = 9.3%). More critically, considerable open-circuit voltage (Voc) enhancements were achieved by PBDBTz-2 and PBDBTz-5, which were 0.14 and 0.21 V higher than that of PBDB-T. A detailed analysis showed that the reduced energy loss resulted from the lower radiative recombination below the band gap and nonradiative recombination loss. This study demonstrated that the introduction of thiazole π-spacers with different orientations is effective to reduce the energy losses of OSCs, which provided valuable inspirations for the development of new conjugated polymers to the efficiency breakthrough of OSCs in future.

Trifluoromethyl-Substituted Large Band-Gap Polytriphenylamines for Polymer Solar Cells with High Open-Circuit Voltages.

Two large band-gap polymers (PTPACF and PTPA2CF) based on polytriphenylamine derivatives with the introduction of electron-withdrawing trifluoromethyl groups were designed and prepared by Suzuki polycondensation reaction. The chemical structures, thermal, optical and electrochemical properties were characterized in detail. From the UV-visible absorption spectra, the PTPACF and PTPA2CF showed the optical band gaps of 2.01 and 2.07 eV, respectively. The cyclic voltammetry (CV) measurement displayed the deep highest occupied molecular orbital (HOMO) energy levels of -5.33 and -5.38 eV for PTPACF and PTPA2CF, respectively. The hole mobilities, determined by field-effect transistor characterization, were 2.5 × 10-3 and 1.1 × 10-3 cm² V-1 S-1 for PTPACF and PTPA2CF, respectively. The polymer solar cells (PSCs) were tested under the conventional device structure of ITO/PEDOT:PSS/polymer:PC71BM/PFN/Al. All of the PSCs showed the high open circuit voltages (Vocs) with the values approaching 1 V. The PTPACF and PTPA2CF based PSCs gave the power conversion efficiencies (PCEs) of 3.24% and 2.40%, respectively. Hence, it is a reliable methodology to develop high-performance large band-gap polymer donors with high Vocs through the feasible side-chain modification.

Origin of Reduced Open-Circuit Voltage in Highly Efficient Small-Molecule-Based Solar Cells upon Solvent Vapor Annealing.

In this study, we demonstrate that remarkably reduced open-circuit voltage in highly efficient organic solar cells (OSCs) from a blend of phenyl-C61-butyric acid methyl ester and a recently developed conjugated small molecule (DPPEZnP-THD) upon solvent vapor annealing (SVA) is due to two independent sources: increased radiative recombination and increased nonradiative recombination. Through the measurements of electroluminescence due to the emission of the charge-transfer state and photovoltaic external quantum efficiency measurement, we can quantify that the open-circuit voltage losses in a device with SVA due to the radiative recombination and nonradiative recombination are 0.23 and 0.31 V, respectively, which are 0.04 and 0.07 V higher than those of the as-cast device. Despite of the reduced open-circuit voltage, the device with SVA exhibited enhanced dissociation of charge-transfer excitons, leading to an improved short-circuit current density and a remarkable power conversion efficiency (PCE) of 9.41%, one of the best for solution-processed OSCs based on small-molecule donor materials. Our study also clearly shows that removing the nonradiative recombination pathways and/or suppressing energetic disorder in the active layer would result in more long-lived charge carriers and enhanced open-circuit voltage, which are prerequisites for further improving the PCE.

Multi-Length-Scale Morphologies Driven by Mixed Additives in Porphyrin-Based Organic Photovoltaics.

A new category of deep-absorbing small molecules is developed. Optimized devices driven by mixed additives show a remarkable short-circuit current of ≈20 mA cm(-2) and a highest power conversion efficiency of 9.06%. A multi-length-scale morphology is formed, which is fully characterized by resonant soft X-ray scattering, high-angle annular dark film image transmission electron microscopy, etc.