Harnessing Electro-Descriptors for Mechanistic and Machine Learning Analysis of Photocatalytic Organic Reactions.

Photocatalysis has emerged as an effective tool for addressing the contemporary challenges in organic synthesis. However, the trial-and-error-based screening of feasible substrates and optimal reaction conditions remains time-consuming and potentially expensive in industrial practice. Here, we demonstrate an electrochemical-based data-acquisition approach that derives a simple set of redox-relevant electro-descriptors for effective mechanistic analysis and performance evaluation through machine learning (ML) in photocatalytic synthesis. These electro-descriptors correlate to the quantification of shifted charge transfer processes in response to the photoirradiation and enabled construction of reactivity diagram where high-yield reactive "hot zones" can reflect subtle changes of the reaction system. For the model reaction of photocatalytic deoxygenation reaction, the influence of varying carboxylic acids (substrate A, oxidation-intended) and alkenes (substrate B, reduction-intended) and varying reaction conditions on the reaction yield can be visualized, while mathematical analysis of the electro-descriptor patterns further revealed distinct mechanistic/kinetic impacts from different substrates and conditions. Additionally, in the application of ML algorithms, the experimentally derived electro-descriptors reflect an overall redox kinetic outcome contributed from vast reaction parameters, serving as a capable means to reduce the dimensionality in the case of complex multiparameter chemical space. As a result, utilization of electro-descriptors enabled efficient and robust quantitative evaluation of chemical reactivity, demonstrating promising potential of introducing operando-relevant experimental insights in the data-driven chemistry.

Dynamic Interchain Motion in 1D Tetrathiafulvalene-Based Coordination Polymers for Highly Sensitive Molecular Recognition.

The application of electrically conductive 1D coordination polymers (1D CPs) in nanoelectronic molecular recognition is theoretically promising yet rarely explored due to the challenges in their synthesis and optimization of electrical properties. In this regard, two tetrathiafulvalene-based 1D CPs, namely [Co(m-H2TTFTB)(DMF)2(H2O)]n (Co-m-TTFTB), and {[Ni(m-H2TTFTB)(CH3CH2OH)1.5(H2O)1.5]·(H2O)0.5}n (Ni-m-TTFTB) are successfully constructed. The shorter S···S contacts between the [M(solvent)3(m-H2TTFTB)]n chains contribute to a significant improvement in their electrical conductivities. The powder X-ray diffraction (PXRD) under different organic solvents reveals the flexible and dynamic structural characteristic of M-m-TTFTB, which, combined with the 1D morphology, lead to their excellent performance for sensitive detection of volatile organic compounds. Co-m-TTFTB achieves a limit of detection for ethanol vapor down to 0.5 ppm, which is superior to the state-of-the-art chemiresistive sensors based on metal-organic frameworks or organic polymers at room temperature. In situ diffuse reflectance infrared Fourier transform spectroscopy, PXRD measurements and density functional theory calculations reveal the molecular insertion sensing mechanism and the corresponding structure-function relationship. This work expands the applicable scenario of 1D CPs and opens a new realm of 1D CP-based nanoelectronic sensors for highly sensitive room temperature gas detection.

Approaching the Schottky-Mott limit in van der Waals metal-semiconductor junctions.

The junctions formed at the contact between metallic electrodes and semiconductor materials are crucial components of electronic and optoelectronic devices 1 . Metal-semiconductor junctions are characterized by an energy barrier known as the Schottky barrier, whose height can, in the ideal case, be predicted by the Schottky-Mott rule2-4 on the basis of the relative alignment of energy levels. Such ideal physics has rarely been experimentally realized, however, because of the inevitable chemical disorder and Fermi-level pinning at typical metal-semiconductor interfaces2,5-12. Here we report the creation of van der Waals metal-semiconductor junctions in which atomically flat metal thin films are laminated onto two-dimensional semiconductors without direct chemical bonding, creating an interface that is essentially free from chemical disorder and Fermi-level pinning. The Schottky barrier height, which approaches the Schottky-Mott limit, is dictated by the work function of the metal and is thus highly tunable. By transferring metal films (silver or platinum) with a work function that matches the conduction band or valence band edges of molybdenum sulfide, we achieve transistors with a two-terminal electron mobility at room temperature of 260 centimetres squared per volt per second and a hole mobility of 175 centimetres squared per volt per second. Furthermore, by using asymmetric contact pairs with different work functions, we demonstrate a silver/molybdenum sulfide/platinum photodiode with an open-circuit voltage of 1.02 volts. Our study not only experimentally validates the fundamental limit of ideal metal-semiconductor junctions but also defines a highly efficient and damage-free strategy for metal integration that could be used in high-performance electronics and optoelectronics.

Solution-processable 2D semiconductors for high-performance large-area electronics.

Two-dimensional (2D) materials, consisting of atomically thin crystal layers bound by the van der Waals force, have attracted much interest because of their potential in diverse technologies, including electronics, optoelectronics and catalysis1-10. In particular, solution-processable 2D semiconductor (such as MoS2) nanosheets are attractive building blocks for large-area thin-film electronics. In contrast to conventional zero- and one-dimensional nanostructures (quantum dots and nanowires, respectively), which are typically plagued by surface dangling bonds and associated trapping states, 2D nanosheets have dangling-bond-free surfaces. Thin films created by stacking multiple nanosheets have atomically clean van der Waals interfaces and thus promise excellent charge transport11-15. However, preparing high-quality solution-processable 2D semiconductor nanosheets remains a challenge. For example, MoS2 nanosheets and thin films produced using lithium intercalation and exfoliation are plagued by the presence of the metallic 1T phase and poor electrical performance (mobilities of about 0.3 square centimetres per volt per second and on/off ratios of less than 10)2,12, and materials produced by liquid exfoliation exhibit an intrinsically broad thickness distribution, which leads to poor film quality and unsatisfactory thin-film electrical performance (mobilities of about 0.4 square centimetres per volt per second and on/off ratios of about 100)14,16,17. Here we report a general approach to preparing highly uniform, solution-processable, phase-pure semiconducting nanosheets, which involves the electrochemical intercalation of quaternary ammonium molecules (such as tetraheptylammonium bromide) into 2D crystals, followed by a mild sonication and exfoliation process. By precisely controlling the intercalation chemistry, we obtained phase-pure, semiconducting 2H-MoS2 nanosheets with a narrow thickness distribution. These nanosheets were then further processed into high-performance thin-film transistors, with room-temperature mobilities of about 10 square centimetres per volt per second and on/off ratios of 106 that greatly exceed those obtained for previous solution-processed MoS2 thin-film transistors. The scalable fabrication of large-area arrays of thin-film transistors enabled the construction of functional logic gates and computational circuits, including an inverter, NAND, NOR, AND and XOR gates, and a logic half-adder. We also applied our approach to other 2D materials, including WSe2, Bi2Se3, NbSe2, In2Se3, Sb2Te3 and black phosphorus, demonstrating its potential for generating versatile solution-processable 2D materials.

Integrating Tetrathiafulvalene and Nickel-Bis(dithiolene) Units into Donor-Acceptor Covalent Organic Frameworks for Stable and Efficient Photothermal Conversion.

Tetrathiafulvalene (TTF) and Ni-bis(dithiolene) are typical conductive units widely studied in electronics, optics, and photochemistry. However, their applications in near-infrared (NIR) photothermal conversion are often limited by insufficient NIR absorption and low chemical/thermal stability. Herein, we integrate TTF and Ni-bis(dithiolene) into a covalent organic framework (COF) with stable and efficient NIR and solar photothermal conversion performance. Two isostructural COFs, namely Ni-TTF and TTF-TTF, are successfully isolated which are composed of TTF and Ni-bis(dithiolene) units as donor-acceptor (D-A) pairs or TTF units only. Both COFs show high BET surface areas and good chemical/thermal stability. Notably, compared with TTF-TTF, the periodic D-A arrangement in Ni-TTF significantly lowers the bandgap, leading to unprecedented NIR and solar photothermal conversion performance.

Redox-Active Mixed-Linker Metal-Organic Frameworks with Switchable Semiconductive Characteristics for Tailorable Chemiresistive Sensing.

Metal-organic frameworks (MOFs), with diverse metal nodes and designable organic linkers, offer unique opportunities for the rational engineering of semiconducting properties. In this work, we report a mixed-linker conductive MOF system with both tetrathiafulvalene and Ni-bis(dithiolene) moieties, which allows the fine-tuning of electronic structures and semiconductive characteristics. By continuously increasing the molar ratio between tetrathiafulvalene and Ni-bis(dithiolene), the switching of the semiconducting behaviors from n-type to p-type was observed along with an increase in electrical conductivity by 3 orders of magnitude (from 2.88×10-7  S m-1 to 9.26×10-5  S m-1 ). Furthermore, mixed-linker MOFs were applied for the chemiresistive detection of volatile organic compounds (VOCs), where the sensing performance was modulated by the corresponding linker ratios, showing synergistic and nonlinear modulation effects.

Highly Efficient Electrochemical Nitrate Reduction to Ammonia in Strong Acid Conditions with Fe2 M-Trinuclear-Cluster Metal-Organic Frameworks.

Nitrate-containing industrial wastewater poses a serious threat to the global food security and public health safety. As compared to the traditional microbial denitrification, electrocatalytic nitrate reduction shows better sustainability with ultrahigh energy efficiency and the production of high-value ammonia (NH3 ). However, nitrate-containing wastewater from most industrial processes, such as mining, metallurgy, and petrochemical engineering, is generally acidic, which contradicts the typical neutral/alkaline working conditions for both denitrifying bacteria and the state-of-the-art inorganic electrocatalysts, leading to the demand for pre-neutralization and the problematic hydrogen evaluation reaction (HER) competition and catalyst dissolution. Here, we report a series of Fe2 M (M=Fe, Co, Ni, Zn) trinuclear cluster metal-organic frameworks (MOFs) that enable the highly efficient electrocatalytic nitrate reduction to ammonium under strong acidic conditions with excellent stability. In pH=1 electrolyte, the Fe2 Co-MOF demonstrates the NH3 yield rate of 20653.5 µg h-1 mg-1 site with 90.55 % NH3 -Faradaic efficiency (FE), 98.5 % NH3 -selectivity and up to 75 hr of electrocatalytic stability. Additionally, successful nitrate reduction in high-acidic conditions directly produce the ammonium sulfate as nitrogen fertilizer, avoiding the subsequent aqueous ammonia extraction and preventing the ammonia spillage loss. This series of cluster-based MOF structures provide new insights into the design principles of high-performance nitrate reduction catalysts under environmentally-relevant wastewater conditions.

Highly Selective Electrocatalytic Oxidation of Amines to Nitriles Assisted by Water Oxidation on Metal-Doped α-Ni(OH)2.

Selective oxidation to synthesize nitriles is critical for feedstock manufacturing in the chemical industry. Current strategies typically involve substitutions of alkyl halides with toxic cyanides or the use of strong oxidation reagents (oxygen or peroxide) under ammoxidation/oxidation conditions, setting considerable challenges in energy efficiency, sustainability, and production safety. Herein, we demonstrate a facile, green, and safe electrocatalytic route for selective oxidation of amines to nitriles under ambient conditions, assisted by the anodic water oxidation on metal-doped α-Ni(OH)2 (a typical oxygen evolution reaction catalyst). By controlling the balance between co-adsorption of the amine molecule and hydroxyls on the catalyst surface, we demonstrate that Mn doping significantly promotes the subsequent chemical oxidation of amines, resulting in Faradaic efficiencies of 96% for nitriles under ≥99% conversion. This anodic oxidation is further coupled with cathodic hydrogen evolution for overall atomic economy and additional green energy production.

On-Chip Investigation of Electrocatalytic Oxygen Reduction Reaction of 2D Materials.

The on-chip electrocatalytic microdevice (OCEM) is an emerging platform specialized in the electrochemical investigation of single-entity nanomaterials, which is ideal for probing the intrinsic catalytic properties, optimizing performance, and exploring exotic mechanisms. However, the current catalytic applications of OCEMs are almost exclusively in electrocatalytic hydrogen/oxygen evolution reactions with minimized influence from the mass transfer. Here, an OCEM platform specially tailored to investigate the electrocatalytic oxygen reduction reaction (ORR) at a microscopic level by introducing electrolyte convection through a microfluidic flow cell is reported. The setup is established on gold microelectrodes and later successfully applied to investigate how Ar-plasma treatment affects the ORR activities of 2H MoS2 . This study finds that Ar-plasma treatment significantly enhances the ORR performance of MoS2 nanosheets owing to the introduction of surface defects. This study paves the way for highly efficient microscopic investigation of diffusion-controlled electrocatalytic reactions.

Spontaneous Polarity Flipping in a 2D Heterobilayer Induced by Fluctuating Interfacial Carrier Flows.

Polarity often refers to the charge carrier type of a semiconductor or the charging state of a functional group, generally dominating their functionality and performance. Herein we uncover a spontaneous and stochastic polarity-flipping phenomenon in monolayer WSe2, which randomly switches between the n-type and p-type states and is essentially triggered by fluctuating carrier flows from or to the adjacent WS2 monolayer. We have traced such fluctuating carrier flows by interfacial photocurrent measurements in a zero-bias two-terminal device. Such polarity flipping results in switching between the negative and positive correlations between the emission intensities of WS2 and WSe2 in the heterobilayer, which is further well-controlled by the electrostatic gate-tuning experiments in a capacitor-structure device. Our work not only demonstrates giant and intermittent carrier flows through long-range coupling in 2D heterostructures and a consequent spontaneous polarity flipping phenomenon but also provides a two-emitter system with a switchable correlation sign that could project future applications in optical logic devices.

In(III) Metal-Organic Framework Incorporated with Enzyme-Mimicking Nickel Bis(dithiolene) Ligand for Highly Selective CO2 Electroreduction.

Inspired by the exciting physical/chemical properties in metal-organic frameworks (MOFs) of the redox-active tetrathiafulvalene (TTF) ligands, nickel bis(dithiolene-dibenzoic acid), [Ni(C2S2(C6H4COOH)2)2], has been designed and developed as an inorganic analogue of the corresponding TTF-type donors (such as tetrathiafulvalene-tetrabenzoate, TTFTB), where a metal site (Ni) replaces the central C═C bond. In this work, [Ni(C2S2(C6H4COOH)2)2] and In3+ have been successfully assembled into a three-dimensional MOF, (Me2NH2+){InIII-[Ni(C2S2(C6H4COO)2)2]}·3DMF·1.5H2O (1, DMF = N,N-dimethylformamide), with satisfying chemical and thermal stabilities. With the combination of reversible redox activity and unsaturated metal sites originated from [Ni(C2S2(C6H4COOH)2)2], 1 showed a significantly enhanced performance in electrocatalytic CO2 reduction compared with the isomorphic MOF, (Me2NH2+)[InIII-(TTFTB)]·0.7C2H5OH·DMF (2, with TTFTB ligand). More importantly, by mimicking the active [NiS4] sites of formate dehydrogenase and CO-dehydrogenase, a prominently higher conversion rate and Faradaic efficiency (FE), with FEHCOO- increasing from 54.7% to 89.6% (at -1.3 V vs RHE, jHCOO- = 36.0 mA cm-2), were achieved in 1. Mechanistic investigations further confirm that [NiS4] can serve as a CO2 binding site and efficient catalytic center. This unprecedented effect of redox-active nickel dithiolene-based MOF catalysts on the performance of electroreduction of CO2 provides an important strategy for designing stable and efficient crystalline enzyme-mimicking catalysts for the conversion of CO2 into high-value chemical stocks.

Double-Exchange-Induced in situ Conductivity in Nickel-Based Oxyhydroxides: An Effective Descriptor for Electrocatalytic Oxygen Evolution.

Motivated by in silico predictions that Co, Rh, and Ir dopants would lead to low overpotentials to improve OER activity of Ni-based hydroxides, we report here an experimental confirmation on the altered OER activities for a series of metals (Mo, W, Fe, Ru, Co, Rh, Ir) doped into γ-NiOOH. The in situ electrical conductivity for metal doped γ-NiOOH correlates well with the trend in enhanced OER activities. Density functional theory (DFT) calculations were used to rationalize the in situ conductivity of the key intermediate states of metal doped γ-NiOOH during OER. The simultaneous increase of OER activity with intermediate conductivity was later rationalized by their intrinsic connections to the double exchange (DE) interaction between adjacent metal ions with various d orbital occupancies, serving as an indicator for the key metal-oxo radical character, and an effective descriptor for the mechanistic evaluation and theoretical guidance in design and screening of efficient OER catalysts.

Electro-Descriptors for the Performance Prediction of Electro-Organic Synthesis.

Electrochemical organic synthesis has attracted increasing attentions as a sustainable and versatile synthetic platform. Quantitative assessment of the electro-organic reactions, including reaction thermodynamics, electro-kinetics, and coupled chemical processes, can lead to effective analytical tool to guide their future design. Herein, we demonstrate that electrochemical parameters such as onset potential, Tafel slope, and effective voltage can be utilized as electro-descriptors for the evaluation of reaction conditions and prediction of reactivities (yields). An "electro-descriptor-diagram" is generated, where reactive and non-reactive conditions/substances show distinct boundary. Successful predictions of reaction outcomes have been demonstrated using electro-descriptor diagram, or from machine learning algorithms with experimentally-derived electro-descriptors. This method represents a promising tool for data-acquisition, reaction prediction, mechanistic investigation, and high-throughput screening for general organic electro-synthesis.

Rational Synthesis of 1D Hyperbranched Heterostructures with Enhanced Optoelectronic Performance.

One-dimensional (1D) hyperbranched heterostructures (HBHSs) with abundant interfaces are rendered with various interfacial phenomena and functionalities. However, the rational synthesis of 1D HBHSs with desired spatial architecture and specific interface remains a great challenge. Here, we report a seeded growth method for controlled synthesis of two extraordinary types of HBHSs, in which high-intensity of CdS branches selectively grow on 1D nanowire (NW) trunks with different growth behaviors. The composition of the HBHSs can be further tuned by combining with cation exchange method, which enriches the variety of the HBHSs. The optoelectronic devices based on a single HBHS were fabricated and exhibit a better photoresponse performance compared with that of a single NW trunk. This advance provides a strategy for the controlled synthesis HBHSs with complex morphology and offers a platform for exploring their applications for photo harvesting and conversion.

Self-gating in semiconductor electrocatalysis.

The semiconductor-electrolyte interface dominates the behaviours of semiconductor electrocatalysis, which has been modelled as a Schottky-analogue junction according to classical electron transfer theories. However, this model cannot be used to explain the extremely high carrier accumulations in ultrathin semiconductor catalysis observed in our work. Inspired by the recently developed ion-controlled electronics, we revisit the semiconductor-electrolyte interface and unravel a universal self-gating phenomenon through microcell-based in situ electronic/electrochemical measurements to clarify the electronic-conduction modulation of semiconductors during the electrocatalytic reaction. We then demonstrate that the type of semiconductor catalyst strongly correlates with their electrocatalysis; that is, n-type semiconductor catalysts favour cathodic reactions such as the hydrogen evolution reaction, p-type ones prefer anodic reactions such as the oxygen evolution reaction and bipolar ones tend to perform both anodic and cathodic reactions. Our study provides new insight into the electronic origin of the semiconductor-electrolyte interface during electrocatalysis, paving the way for designing high-performance semiconductor catalysts.

Electrochemical Cross-Dehydrogenative Coupling between Phenols and ß-Dicarbonyl Compounds: Facile Construction of Benzofurans.

Preparative electrochemical synthesis is an ideal method for establishing green, sustainable processes. The major benefits of an electro-organic strategy over that of conventional chemical synthesis are the avoidance of reagent waste and mild reaction conditions. Here, an intermolecular cross-dehydrogenative coupling between phenols and ß-dicarbonyl compounds has been developed to build various benzofurans under undivided electrolytic conditions. Neither transition metals nor external chemical oxidants are required to facilitate the dehydrogenation and dehydration processes. The key factor in success was the use of nBu4 NBF4 as the electrolyte and hexafluoroisopropanol as the solvent, which play key roles in the cyclocondensation step. This electrolysis is scalable and can be used as a key step in drug synthesis. On the basis of several experimental results, the mechanism, particularly of the remarkable anodic oxidation and cyclization process, was illustrated.

In Situ Probing Molecular Intercalation in Two-Dimensional Layered Semiconductors.

The electrochemical molecular intercalation of two-dimensional layered materials (2DLMs) produces stable and highly tunable superlattices between monolayer 2DLMs and self-assembled molecular layers. This process allows unprecedented flexibility in integrating highly distinct materials with atomic/molecular precision to produce a new generation of organic/inorganic superlattices with tunable chemical, electronic, and optical properties. To better understand the intercalation process, we developed an on-chip platform based on MoS2 model devices and used optical, electrochemical, and in situ electronic characterizations to resolve the intermediate stages during the intercalation process and monitor the evolution of the molecular superlattices. With sufficient charge injection, the organic cetyltrimethylammonium bromide (CTAB) intercalation induces the phase transition of MoS2 from semiconducting 2H phase to semimetallic 1T phase, resulting in a dramatic increase of electrical conductivity. Therefore, in situ monitoring the evolution of the device conductance reveals the electrochemical intercalation dynamics with an abrupt conductivity change, signifying the onset of the molecule intercalation. In contrast, the intercalation of tetraheptylammonium bromide (THAB), a branched molecule in a larger size, resulting in a much smaller number of charges injected to avoid the 2H to 1T phase transition. Our study demonstrates a powerful platform for in situ monitoring the molecular intercalation of many 2DLMs (MoS2, WSe2, ReS2, PdSe2, TiS2, and graphene) and systematically probing electronic, optical, and optoelectronic properties at the single-nanosheet level.

Vertical Charge Transport and Negative Transconductance in Multilayer Molybdenum Disulfides.

Negative transconductance (NTC) devices have been heavily investigated for their potential in low power logical circuit, memory, oscillating, and high-speed switching applications. Previous NTC devices are largely attributed to two working mechanisms: quantum mechanical tunneling, and mobility degradation at high electrical field. Herein we report a systematic investigation of charge transport in multilayer two-dimensional semiconductors (2DSCs) with optimized van der Waals contact and for the first time demonstrate NTC and antibipolar characteristics in multilayer 2DSCs (such as MoS2, WSe2). By varying the measurement temperature, bias voltage, and body thickness, we found the NTC behavior can be attributed to a vertical potential barrier in the multilayer 2DSCs and the competing mechanisms between intralayer lateral transport and interlayer vertical transport, thus representing a new working mechanism for NTC operation. Importantly, this vertical potential barrier arises from inhomogeneous carrier distribution in 2DSC from the near-substrate region to the bulk region, which is in contrast to conventional semiconductors with homogeneous doping defined by bulk dopants. We further show that the unique NTC behavior can be explored for creating frequency doublers and phase shift keying circuits with only one transistor, greatly simplifying the circuit design compared to conventional technology.

Highly Sensitive Chemical Detection with Tunable Sensitivity and Selectivity from Ultrathin Platinum Nanowires.

Ultrathin platinum nanowires obtained from wet-synthesis with no strong binding ligands exhibit very high sensitivity toward hydrogen gas (two orders of magnitude increase compared with state-of-the-art devices). Their chemical sensitivity, selectivity, and other sensing characteristics can be rationally tailored through further surface engineering. A significantly reduced cross-sensitivity toward humidity is achieved, while the hydrogen sensitivity is preserved or even enhanced.

van der Waals Heterojunction Devices Based on Organohalide Perovskites and Two-Dimensional Materials.

The recently emerged organohalide perovskites (e.g., CH3NH3PbI3) have drawn intense attention for high efficiency solar cells. However, with a considerable solubility in many solvents, these perovskites are not typically compatible with conventional lithography processes for more complicated device fabrications that are important for both fundamental studies and technological applications. Here, we report the creation of novel heterojunction devices based on perovskites and two-dimensional (2D) crystals by taking advantage of the layered characteristic of lead iodide (PbI2) and vapor-phase intercalation. We show that a graphene/perovskite/graphene vertical stack can deliver a highest photoresponsivity of ∼950 A/W and photoconductive gain of ∼2200, and a graphene/WSe2/perovskite/graphene heterojunction can display a high on/off ratio (∼10(6)) transistor behavior with distinct gate-tunable diode characteristics and open-circuit voltages. Such unique perovskite-2D heterostructures have significant potential for future optoelectronic research and can enable broad possibilities with compositional tunability of organohalide perovskites and the versatility offered by diverse 2D materials.