Positronium Laser Cooling via the 1

We report on laser cooling of a large fraction of positronium (Ps) in free flight by strongly saturating the 1^{3}S-2^{3}P transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived 2^{3}P states. The second effect is one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) to 170(20) K. We demonstrate a 58(9)% increase in the fraction of Ps atoms with v_{1D}<3.7×10^{4} ms^{-1}.

AEgIS at ELENA: outlook for physics with a pulsed cold antihydrogen beam.

The efficient production of cold antihydrogen atoms in particle traps at CERN's Antiproton Decelerator has opened up the possibility of performing direct measurements of the Earth's gravitational acceleration on purely antimatter bodies. The goal of the AEgIS collaboration is to measure the value of g for antimatter using a pulsed source of cold antihydrogen and a Moiré deflectometer/Talbot-Lau interferometer. The same antihydrogen beam is also very well suited to measuring precisely the ground-state hyperfine splitting of the anti-atom. The antihydrogen formation mechanism chosen by AEgIS is resonant charge exchange between cold antiprotons and Rydberg positronium. A series of technical developments regarding positrons and positronium (Ps formation in a dedicated room-temperature target, spectroscopy of the n=1-3 and n=3-15 transitions in Ps, Ps formation in a target at 10 K inside the 1 T magnetic field of the experiment) as well as antiprotons (high-efficiency trapping of [Formula: see text], radial compression to sub-millimetre radii of mixed [Formula: see text] plasmas in 1 T field, high-efficiency transfer of [Formula: see text] to the antihydrogen production trap using an in-flight launch and recapture procedure) were successfully implemented. Two further critical steps that are germane mainly to charge exchange formation of antihydrogen-cooling of antiprotons and formation of a beam of antihydrogen-are being addressed in parallel. The coming of ELENA will allow, in the very near future, the number of trappable antiprotons to be increased by more than a factor of 50. For the antihydrogen production scheme chosen by AEgIS, this will be reflected in a corresponding increase of produced antihydrogen atoms, leading to a significant reduction of measurement times and providing a path towards high-precision measurements.This article is part of the Theo Murphy meeting issue 'Antiproton physics in the ELENA era'.

Development, preclinical evaluation and validation of a novel quick vascular closure device for transluminal, cardiac and radiological arterial catheterization.

Following percutaneous coronary intervention, vascular closure devices (VCDs) are increasingly used to reduce time to ambulation, enhance patient comfort, and reduce potential complications compared with traditional manual compression. Newer techniques include complicated, more or less automated suture devices, local application of pads or the use of metal clips and staples. These techniques often have the disadvantage of being time consuming, expensive or not efficient enough. The VCD failure rate in association with vascular complications of 2.0-9.5%, depending on the type of VCD, is still not acceptable. Therefore, the aim of this study is to develop a self-expanding quick vascular closure device (QVCD) made from a bioabsorbable elastic polymer that can be easily applied through the placed introducer sheath. Bioabsorbable block-co-polymers were synthesized and the chemical and mechanical degradation were determined by in vitro tests. The best fitting polymer was selected for further investigation and for microinjection moulding. After comprehensive haemocompatibility analyses in vitro, QVCDs were implanted in arterial vessels following arteriotomy for different time points in sheep to investigate the healing process. The in vivo tests proved that the new QVCD can be safely placed in the arteriotomy hole through the existing sheath instantly sealing the vessel. The degradation time of 14 days found in vitro was sufficient for vessel healing. After 4 weeks, the remaining QVCD material was covered by neointima. Overall, our experiments showed the safety and feasibility of applying this novel QVCD through an existing arterial sheath and hence encourage future work with larger calibers.

Comparative neuro tissue engineering using different nerve guide implants.

At the moment autologous nerve grafting remains the only reasonable technique for reconstruction of peripheral nerve defects. Unfortunately, this technique has a lot of complications and disadvantages. These problems are related to the autologous nerve that is harvested for this procedure. Donor site morbidity with loss of sensitivity, painful neuroma formation and of course the restricted availability of autologous nerves stimulates the idea for alternative techniques on that field. In this paper we describe our experience with different graft materials for reconstruction of a 2 cm nerve gap in a median nerve model in rats. After implantation of various materials (biological/synthetic) the main experiments were conducted with a synthetic, biodegradable nerve conduit seeded with autologous Schwann cells. With this material we were able to reconstruct successfully a 2 cm gap in the rat median nerve. Regeneration with this material was found to be equally to an autologous nerve graft.

[Tissue engineering of peripheral nerves]. / Tissue Engineering peripherer Nerven.

BACKGROUND: In spite of considerable progress in microsurgical techniques, the treatment of long distance defects in peripheral nerves remains challenging for the surgeon. Autologous nerve grafting has been the only applicable procedure to overcome such defects in the past. Due to the known disadvantages of this procedure (neuroma formation and sensory deficits at the donor-site, limited availability of donor-material, etc.) and impaired regenerative results, different tubulisation techniques are discussed more frequently as alternatives to the autologous nerve grafts. AIM OF THE STUDY: In this work, the authors summarise their experiences and results with different synthetically developed materials, cellular and acellular tubes and venous conduits for the reconstruction of peripheral nerve defects. MATERIAL AND METHODS: To analyse peripheral nerve regeneration, we utilised a median nerve model in rats. In these studies nerve gaps up to 40 mm were induced. Guiding tubes of various materials (trimethylene carbonate-epsilon-caprolactone, polyethylene, veins, and collagen) were employed. Furthermore, we introduced Schwann cells as cellular elements into some of the trimethylene carbonate-epsilon-caprolactone tubes. The longest postoperative observation period was nine months. RESULTS: The results demonstrated that only in the case of cellular filled tubes (syngenic Schwann cells) did regeneration occur across the 20 mm gap. This regeneration was comparable to that induced after autologous grafting. Across a 40 mm gap the autologous graft demonstrated the best results.

Encapsulation of islets in rough surface, hydroxymethylated polysulfone capillaries stimulates VEGF release and promotes vascularization after transplantation.

The transplantation of encapsulated islets of Langerhans is one approach to treat type 1 diabetes without the need of lifelong immunosuppression. Capillaries have been used for macroencapsulation because they have a favorable surface-to-volume ratio and because they can be refilled. It is unclear at present whether the outer surface of such capillaries should be smooth to prevent, or rough to promote, cell adhesions. In this study we tested a new capillary made of modified polysulfone (MWCO: 50 kDa) with a rough, open-porous outer surface for islet transplantation. Compared with free-floating islets, encapsulation of freshly isolated rat islets affected neither the kinetics nor the efficiency of glucose-induced insulin release in perifusion experiments. Free-floating islets maintained insulin secretion during cell culture but encapsulated islets gradually lost their glucose responsiveness and released VEGF. This indicated hypoxia in the capillary lumen. Transplantation of encapsulated rat islets into diabetic rats significantly reduced blood glucose concentrations from the first week of implantation. This hypoglycaemic effect persisted until explantation 4 weeks later. Transplantation of encapsulated porcine islets into diabetic rats reduced blood glucose concentrations depending on the islet purity. With semipurified islets a transient reduction of blood glucose concentrations was observed (2, 8, 18, 18 days) whereas with highly purified islets a sustained normoglycaemia was achieved (more than 28 days). Explanted capillaries containing rat islets were covered with blood vessels. Vascularization was also observed on capillaries containing porcine islets that were explanted from normoglycaemic rats. In contrast, on capillaries containing porcine islets that were explanted from hyperglycemic rats a fibrous capsule and lymphocyte accumulations were observed. No vascularization on the surface of transplanted capillaries was observed in the absence of islets. In conclusion, encapsulated islets can release VEGF, which appears to be an important signal for the vascularization of the capillary material. The rough, open-porous outer surface of the polysulfone capillary provides a site well suited for vascular tissue formation and may allow a prolonged islet function after transplantation.

In vitro test of new biomaterials for the development of a bioartificial pancreas.

The implantation of macroencapsulated islets has the potential to restore endogenous insulin secretion in type 1 diabetics, with no need for lifetime immunosuppression. To match the physiological fluctuations of blood glucose concentrations with appropriate insulin release, the macroencapsulation material must combine immunoprotection with optimal diffusion properties for glucose and insulin. The impact of chemical modifications of polysulphone (PSU) capillary polymers with a cutoff of 50 kD on glucose-induced insulin secretion of macroencapsulated rat islets was studied in perifusion experiments. The insulin release of free-floating islets showed the typical rapid response to glucose stimulation. Total insulin release (AUC between minute 30 and 120 of perifusion) reached 117+/-22 ng/ml. Blending PSU with polyvinylpyrrolidone or sodium-dodecyl-sulfate was not suitable for islet macroencapsulation, since glucose-induced insulin release was absent or disturbed. Hydroxy-methylation (CH2OH) of PSU improved the secretory behavior of macroencapsulated islets depending on the degree of PSU substitution (DS 0.8, AUC 62+/-15 ng/ml; DS 1.8, 111+/-24 ng/ml). In highly substituted PSU-capillaries the kinetics of glucose-induced insulin release was very similar to that observed in free-floating islets. Two consecutive glucose stimulations potentiated insulin release of free-floating islets during the second period of stimulation. Furthermore, freshly isolated macroencapsulated islets responded with more efficient insulin secretion after the initial priming. In conclusion, in vitro membrane screening identified highly substituted hydroxy-methylated PSU as the material of choice for islet encapsulation in a bioartificial pancreas.

Areal density measurement is a convenient method for the determination of porcine islet equivalents without counting and sizing individual islets.

The determination of islet mass is important for the normalization of islet experiments in the laboratory and for the precise dosing of islets for transplantation. The common microscopical analysis is based on individual islet sizing, calculation of the frequency distribution, and conversion into islet equivalents (IEQ), which is the volume of a spherical islet with a diameter of 150 microm. However, islets are of irregular form, which makes this determination user dependent, and the analysis is irreproducible once the original sample is discarded. This routine technique of islet quantification was compared with the analysis of areal density measurements. It was assumed that the entire area occupied by islets can be expressed in IEQ without sizing and counting individual islets. Porcine islets were isolated by continuous digestion/filtration and purified by gradient centrifugation. Purified islets were stained with dithizone and were repeatedly pictured under the microscope with random area selection. A total of 51 pictures was taken from 11 different purifications and stained islets were detected by digital image analysis. The correlation coefficient (r) between bothanalyses was 0.977 with an underestimation of islet yield by areal density detection (slope: 0.75 +/- 0.03). Areal density analysis per picture took about 1 min, which is about 10 times faster than the traditional method without increasing the method error (CV 2.1% vs. 2.7%). In summary, areal density measurements allow a rapid and reproducible estimation of IEQ without counting individual islets. It can be performed in a single step analysis without computer programming and is valuable for online determinations of islet yield preceding transplantation.

Cultivation of porcine hepatocytes in polyurethane nonwovens as part of a biohybrid liver support system.

Many patients suffering from end-stage liver disease cannot be transplanted within reasonable time due to the shortage of donor organs. Bioartificial liver support systems may contribute to the liver regeneration or bridging the time until a liver graft for transplantation becomes available. Nonwovens with integrated oxygenation capacity have been developed and manufactured by melt blow technology using thermoplastic polyurethane. Capillary membranes for oxygenation were integrated into the nonwoven during the processing. The polyurethane nonwoven structures with adapted pore size and high pore volume allow high cell densities in the hepatocyte culture. The three-dimensional cell culture was housed by a flow bioreactor system and was integrated in a closed loop circulation with monitoring possibilities for pressure, pH, temperature, ammonia, and oxygen. Hepatocytes were isolated from rats or pigs by collagenase perfusion and infused into the medium-perfused circulation. Cells showed high viability and hepatocyte specific cytochrome P450-dependent metabolic function in culture (MEGX test).

A moiré deflectometer for antimatter.

The precise measurement of forces is one way to obtain deep insight into the fundamental interactions present in nature. In the context of neutral antimatter, the gravitational interaction is of high interest, potentially revealing new forces that violate the weak equivalence principle. Here we report on a successful extension of a tool from atom optics--the moiré deflectometer--for a measurement of the acceleration of slow antiprotons. The setup consists of two identical transmission gratings and a spatially resolving emulsion detector for antiproton annihilations. Absolute referencing of the observed antimatter pattern with a photon pattern experiencing no deflection allows the direct inference of forces present. The concept is also straightforwardly applicable to antihydrogen measurements as pursued by the AEgIS collaboration. The combination of these very different techniques from high energy and atomic physics opens a very promising route to the direct detection of the gravitational acceleration of neutral antimatter.

Resistive cooling circuits for charged particle traps using crystal resonators.

The paper addresses a novel method to couple a signal from charged particles in a Penning trap to a high Q resonant circuit using a crystal resonator. Traditionally, the trap capacity is converted into a resonator by means of an inductance. The tuned circuit's Q factor is directly linked to the input impedance "seen" by the trapped particles at resonance frequency. This parallel resonance impedance is a measure of the efficiency of resistive cooling and thus it should be optimized. We propose here a commercially available crystal resonator since it exhibits a very high Q value and a parallel resonance impedance of several MΩ. The possibility to tune the parallel resonance frequency of the quartz results in filter behavior that allows covering a range of some tens of its 3dB bandwidth by means of tuning.

Temporally controlled modulation of antihydrogen production and the temperature scaling of antiproton-positron recombination.

We demonstrate temporally controlled modulation of cold antihydrogen production by periodic RF heating of a positron plasma during antiproton-positron mixing in a Penning trap. Our observations have established a pulsed source of atomic antimatter, with a rise time of about 1 s, and a pulse length ranging from 3 to 100 s. Time-sensitive antihydrogen detection and positron plasma diagnostics, both capabilities of the ATHENA apparatus, allowed detailed studies of the pulsing behavior, which in turn gave information on the dependence of the antihydrogen production process on the positron temperature T. Our data are consistent with power law scaling T (-1.1+/-0.5) for the production rate in the high temperature regime from approximately 100 meV up to 1.5 eV. This is not in accord with the behavior accepted for conventional three-body recombination.

Seeding of human vascular cells onto small diameter polyurethane vascular grafts.

INTRODUCTION: Thrombogenicity of small diameter vascular prostheses might be reduced by complete coverage of the luminal surface with vascular cells. We investigated cell seeding on polyurethane vascular prostheses (PUVP). METHODS: 45 PUVP were divided into three groups of n = 15 each: Group A (diameter 20 mm, gamma-sterilized), Group B (diameter 4 mm, gamma-sterilized), and Group C (diameter 4 mm, ethylene oxid [Eto]-sterilized). Human smooth muscle cells (SMC), fibroblasts (FB), and endothelial cells (EC) were isolated from saphenous vein segments and expanded in culture. PUVPs were pre-seeded with a mixed culture of FBs and SMCs (mean 7.7 +/- 2.3 x 10(6) cells) followed by EC seeding (mean 4.4 +/- 0.9 x 10(6) cells). Seven days after cell seeding, PUVPs were perfused under a pulsatile flow. Flow definitions were as follows: adaption phase: low flow, resulting pressure: 60/30 mm Hg; high flow: resulting pressure: 160/50 mm Hg, lasting for 4 hours in all groups. Three subgroups were defined out of each group, differing in the perfusion strategy: high flow immediately, adaption phase of 15 minutes followed by high flow, and adaption phase of 30 minutes followed by high flow. Specimens were taken after each seeding procedure, prior to and after perfusion, and then examined using a scanning electron microscope (SEM) and immunohistochemical staining procedures. RESULTS: Pre-seeding with the mixed culture revealed a better initial adhesion in Groups A and B compared to group C (76% vs. 41%). In Groups A and B, EC seeding (adhesion 72%) resulted in a confluent EC layer. Immunohistochemical stainings were positive for collagen IV, laminin, CD31, and factor VIII, but negative for eNOS. In Group C, only isolated cells were found after each seeding procedure, which rounded up and vanished during the next days. When perfused with high-flow immediately, Group A and B prostheses revealed small defects (< 10% of the surface) of all cell layers. After perfusion with an adaption phase of 15 minutes only few defects were found within the EC layer with an intact basement membrane. An adaption phase of 30 minutes resulted in a confluent cell layer without significant cell defects. After perfusion, the endothelial cells also stained positive for eNOS. CONCLUSION: Seeding of a mixed culture consisting of FBs and SMC resulted in an excellent EC adhesion and resistance to shear stress. Cell attachment was better on gamma-sterilized PUVPs compared to Eto-sterilization. The cells obviously maintained their ability to adapt to shear stress.

Evidence for the production of slow antiprotonic hydrogen in vacuum.

We present evidence showing how antiprotonic hydrogen, the quasistable antiproton (p)-proton bound system, has been synthesized following the interaction of antiprotons with the molecular ion H2+ in a nested Penning trap environment. From a careful analysis of the spatial distributions of antiproton annihilation events, evidence is presented for antiprotonic hydrogen production with sub-eV kinetic energies in states around n=70, and with low angular momenta. The slow antiprotonic hydrogen may be studied using laser spectroscopic techniques.

Encapsulation of Islets in Rough Surface, Hydroxymethylated Polysulfone Capillaries Stimulates VEGF Release and Promotes Vascularization after Transplantation.

The transplantation of encapsulated islets of Langerhans is one approach to treat type 1 diabetes without the need of lifelong immunosuppression. Capillaries have been used for macroencapsulation because they have a favorable surface-to-volume ratio and because they can be refilled. It is unclear at present whether the outer surface of such capillaries should be smooth to prevent, or rough to promote, cell adhesions. In this study we tested a new capillary made of modified polysulfone (MWCO: 50 kDa) with a rough, open-porous outer surface for islet transplantation. Compared with free-floating islets, encapsulation of freshly isolated rat islets affected neither the kinetics nor the efficiency of glucose-induced insulin release in perifusion experiments. Free-floating islets maintained insulin secretion during cell culture but encapsulated islets gradually lost their glucose responsiveness and released VEGF. This indicated hypoxia in the capillary lumen. Transplantation of encapsulated rat islets into diabetic rats significantly reduced blood glucose concentrations from the first week of implantation. This hypoglycaemic effect persisted until explantation 4 weeks later. Transplantation of encapsulated porcine islets into diabetic rats reduced blood glucose concentrations depending on the islet purity. With semipurified islets a transient reduction of blood glucose concentrations was observed (2, 8, 18, 18 days) whereas with highly purified islets a sustained normoglycaemia was achieved (more than 28 days). Explanted capillaries containing rat islets were covered with blood vessels. Vascularization was also observed on capillaries containing porcine islets that were explanted from normoglycaemic rats. In contrast, on capillaries containing porcine islets that were explanted from hyperglycemic rats a fibrous capsule and lymphocyte accumulations were observed. No vascularization on the surface of transplanted capillaries was observed in the absence of islets. In conclusion, encapsulated islets can release VEGF, which appears to be an important signal for the vascularization of the capillary material. The rough, open-porous outer surface of the polysulfone capillary provides a site well suited for vascular tissue formation and may allow a prolonged islet function after transplantation.

A low-flow adaptation phase improves shear-stress resistance of artificially seeded endothelial cells.

INTRODUCTION: The purpose of this study was to evaluate the effect of different adaptation phases on the shear-stress resistance of endothelial cells seeded artificially onto vascular prostheses and biological heart valves. MATERIAL AND METHODS: Human endothelial cells (EC), fibroblasts (FB), and smooth muscle cells (SMC) were isolated from vena saphena magna pieces and expanded in culture. Group A: 15 polyurethane vascular grafts (20 mm diameter) were seeded with FB and SMC (53 +/- 1.2 million cells), followed by EC seeding (39 +/- 0.9 million cells). Group B: eight stentless porcine valves (Freestyle, Medtronic, USA) were seeded with FB (68 +/- 1.5 million cells) and EC (42 +/- 1.1 million cells). Shear-stress testing was done under pulsatile flow (pulse rate: 80 pulses/min.). Adaptation phase: flow was set to 0.9 +/- 0.3 l/min (systolic pressure: 40 - 50 mm Hg). High flow was 3.2 +/- 0.6 l/min. (systolic pressure: 140 - 160 mm Hg) and lasted over four hours in all groups. The vascular grafts were divided into three groups (n = 5 each): group 1 (high flow immediately), group 2 (adaptation phase of 15 minutes), and group 3 (adaptation phase of 30 minutes). The valves either were given high flow immediately (n = 4) or had an adaptation phase of 30 minutes (n = 4). Specimens were obtained after cell seeding, before, and after perfusion. RESULTS: A confluent EC layer was achieved on all grafts. After perfusion without adaptation, large defects within the cell layer were found. No FB and SMC were seen at the bottom of these defects. In group B, the defects were largest on the ventricular surface of the leaflets. After an adaptation phase of 15 minutes in group A, only a few defects within the EC layer were detected with a still confluent FB and SMC. After a 30-minute adaptation phase defects within the EC layer were very rare and no interruption of the underlying FB and SMC layer was seen. Immunohistochemical staining for factor VIII and CD31 proved the EC to be viable and staining for collagen IV and laminin revealed the formation of a basement membrane. After perfusion, the specimen also stained positive for eNOS. CONCLUSION: An adaptation phase of 30 minutes proved to be sufficient to allow artificially seeded endothelial cells to adapt to shear stress. The formation of a basement membrane was of great importance for the maintenance of a confluent EC layer.

Spatial distribution of cold antihydrogen formation.

Antihydrogen is formed when antiprotons are mixed with cold positrons in a nested Penning trap. We present experimental evidence, obtained using our antihydrogen annihilation detector, that the spatial distribution of the emerging antihydrogen atoms is independent of the positron temperature and axially enhanced. This indicates that antihydrogen is formed before the antiprotons are in thermal equilibrium with the positron plasma. This result has important implications for the trapping and spectroscopy of antihydrogen.

New source of dense, cryogenic positron plasmas.

We have developed a new method, based on the ballistic transfer of preaccumulated plasmas, to obtain large and dense positron plasmas in a cryogenic environment. The method involves transferring plasmas emanating from a region with a low magnetic field (0.14 T) and relatively high pressure (10(-9) mbar) into a 15 K Penning-Malmberg trap immersed in a 3 T magnetic field with a base pressure better than 10(-13) mbar. The achieved positron accumulation rate in the high field cryogenic trap is more than one and a half orders of magnitude higher than the previous most efficient UHV compatible scheme. Subsequent stacking resulted in a plasma containing more than 1.2 x 10(9) positrons, which is a factor 4 higher than previously reported. Using a rotating wall electric field, plasmas containing about 20 x 10(6) positrons were compressed to a density of 2.6 x 10(10) cm(-3). This is a factor of 6 improvement over earlier measurements.