First principles mechanistic study of self-limiting oxidative adsorption of remote oxygen plasma during the atomic layer deposition of alumina.

Plasma-enhanced atomic layer deposition (ALD) of metal oxides is rapidly gaining interest, especially in the electronics industry, because of its numerous advantages over the thermal process. However, the underlying reaction mechanism is not sufficiently understood, particularly regarding saturation of the reaction and densification of the film. In this work, we employ first principles density functional theory (DFT) to determine the predominant reaction pathways, surface intermediates and by-products formed when constituents of O2-plasma or O3 adsorb onto a methylated surface typical of TMA-based alumina ALD. The main outcomes are that a wide variety of barrierless and highly exothermic reactions can take place. This leads to the spontaneous production of various by-products with low desorption energies and also of surface intermediates from the incomplete combustion of -CH3 ligands. Surface hydroxyl groups are the most frequently observed intermediates and are formed as a consequence of the conservation of atoms and charge when methyl ligands are initially oxidized (rather than from subsequent re-adsorption of molecular water). Anionic intermediates such as formates are also commonly observed at the surface in the simulations. Formaldehyde, CH2O, is the most frequently observed gaseous by-product. Desorption of this by-product leads to saturation of the redox reaction at the level of two singlet oxygen atoms per CH3 group, where the oxidation state of C is zero, rather than further reaction with oxygen to higher oxidation states. We conclude that the self-limiting chemistry that defines ALD comes about in this case through the desorption by-products with partially-oxidised carbon. The simulations also show that densification occurs when ligands are removed or oxidised to intermediates, indicating that there may be an inverse relationship between Al/O coordination numbers in the final film and the concentration of chemically-bound ligands or intermediate fragments covering the surface during each ALD pulse. Therefore reactions that generate a bare surface Al will produce denser films in metal oxide ALD.

The United Kingdom and Ireland association of forensic toxicologists forensic toxicology laboratory guidelines (2018).

In 2010, the United Kingdom and Ireland Association of Forensic Toxicologists (UKIAFT) created forensic toxicology laboratory guidelines. This represents a revision of those guidelines as a result of the changing toxicological and technical landscape.

The United Kingdom and Ireland Association of Forensic Toxicologists; establishing best practice for professional training & development in forensic toxicology.

The current status of forensic toxicology in the United Kingdom is discussed with an emphasis on professional training and development. Best practice is proposed using a blend of modular foundation knowledge training, continuing professional development, academic study, research & development and ongoing analytical practice. The need for establishing a professional career structure is also discussed along with a suggested example of a suitable model. The issues discussed in this paper are intended to provoke discussion within the forensic toxicology community, industry regulators and other government bodies responsible for the administration of justice.

Analytical characterization of bioactive N-benzyl-substituted phenethylamines and 5-methoxytryptamines.

RATIONALE: Substances based on the N-(2-methoxybenzyl)phenethylamine template ('NBOMe' derivatives) play an important role in medicinal research but some of these derivatives have also appeared as 'research chemicals' for recreational use which has attracted attention worldwide. A major challenge associated with newly emerging substances includes the lack of analytical data and the ability to correctly identify positional isomers. METHODS: Six N-benzylphenethylamines based on the 2,5-dimethoxy-4-iodophenethylamine structure ('25I') and twelve substituted N-benzyl-5-methoxytryptamines ('5MT') have been prepared and extensively characterized. Techniques used for characterization were gas chromatography/ion trap mass spectrometry in electron and chemical ionization mode, liquid chromatography/diode array detection (DAD), infrared spectroscopy, electrospray high mass accuracy quadrupole time-of-flight tandem mass spectrometry, and triple quadrupole tandem mass spectrometry. RESULTS: The characterization of 18 'NBOMe' compounds provided a comprehensive collection of chromatographic and spectral data. Four groups of three positional isomers, i.e. 25I-NB2OMe, 25I-NB3OMe, 25I-NB4OMe, 25I-NB2B, 25I-NB3B, 25I-NB4B and their 5-methoxytryptamine counterparts, were included and assessed for ability to obtain differentiation. Six meta-substituted N-benzyl derivatives of 5-methoxytryptamine (CF3, F, CH3, Cl, I, SCH3) were also studied. CONCLUSIONS: The implementation of mass spectral techniques was helpful for the differentiation between isomers, for example, when considering the difference in a number of ion ratios. This was considered beneficial in cases where chromatographic separation was only partially achieved under liquid chromatography (LC) conditions. The use of LC/DAD analysis was also found to be valuable for this particular purpose, which confirmed the integrative value of complementary techniques used in areas related to forensic toxicology.

Reductive elimination of hypersilyl halides from zinc(II) complexes. Implications for electropositive metal thin film growth.

Treatment of Zn(Si(SiMe3)3)2 with ZnX2 (X = Cl, Br, I) in tetrahydrofuran (THF) at 23 °C afforded [Zn(Si(SiMe3)3)X(THF)]2 in 83-99% yield. X-ray crystal structures revealed dimeric structures with Zn2X2 cores. Thermogravimetric analyses of [Zn(Si(SiMe3)3)X(THF)]2 demonstrated a loss of coordinated THF between 50 and 155 °C and then single-step weight losses between 200 and 275 °C. The nonvolatile residue was zinc metal in all cases. Bulk thermolyses of [Zn(Si(SiMe3)3)X(THF)]2 between 210 and 250 °C afforded zinc metal in 97-99% yield, Si(SiMe3)3X in 91-94% yield, and THF in 81-98% yield. Density functional theory calculations confirmed that zinc formation becomes energetically favorable upon THF loss. Similar reactions are likely to be general for M(SiR3)n/MXn pairs and may lead to new metal-film-growth processes for chemical vapor deposition and atomic layer deposition.

Atomistic kinetic Monte Carlo study of atomic layer deposition derived from density functional theory.

To describe the atomic layer deposition (ALD) reactions of HfO2 from Hf(N(CH3)2)4 and H2O, a three-dimensional on-lattice kinetic Monte-Carlo model is developed. In this model, all atomistic reaction pathways in density functional theory (DFT) are implemented as reaction events on the lattice. This contains all steps, from the early stage of adsorption of each ALD precursor, kinetics of the surface protons, interaction between the remaining precursors (steric effect), influence of remaining fragments on adsorption sites (blocking), densification of each ALD precursor, migration of each ALD precursors, and cooperation between the remaining precursors to adsorb H2O (cooperative effect). The essential chemistry of the ALD reactions depends on the local environment at the surface. The coordination number and a neighbor list are used to implement the dependencies. The validity and necessity of the proposed reaction pathways are statistically established at the mesoscale. The formation of one monolayer of precursor fragments is shown at the end of the metal pulse. Adsorption and dissociation of the H2O precursor onto that layer is described, leading to the delivery of oxygen and protons to the surface during the H2O pulse. Through these processes, the remaining precursor fragments desorb from the surface, leaving the surface with bulk-like and OH-terminated HfO2, ready for the next cycle. The migration of the low coordinated remaining precursor fragments is also proposed. This process introduces a slow reordering motion (crawling) at the mesoscale, leading to the smooth and conformal thin film that is characteristic of ALD.

Reduction mechanisms of the CuO(111) surface through surface oxygen vacancy formation and hydrogen adsorption.

We studied the reduction of CuO(111) surface using density functional theory (DFT) with the generalized gradient approximation corrected for on-site Coulomb interactions (GGA + U) and screened hybrid DFT (HSE06 functional). The surface reduction process by oxygen vacancy formation and H2 adsorption on the CuO(111) surface is investigated as two different reduction mechanisms. It is found that both GGA + U and HSE06 predict the same trend in the relative stability of oxygen vacancies. We found that loss of the subsurface oxygen is initially thermodynamically favourable. As the oxygen vacancy concentration increases, mixture of subsurface and surface vacancies is energetically preferred over full reduction of the surface or subsurface monolayer. The reduction of Cu(2+) to Cu(+) is found to be more favourable than that of Cu(+) to Cu(0) in the most stable vacancy structures at all concentrations. Consistent with the oxygen vacancy calculations, H2 adsorption occurs initially on under-coordinated surface oxygen. Water molecules are formed upon the adsorption of H2 and this gives a mechanism for H2 reduction of CuO to Cu. Ab initio atomistic thermodynamics shows that reducing CuO to metallic Cu at the surface is more energetically difficult than in the bulk so that the surface oxide protects the bulk from reduction. Using H2 as the reducing agent, it is found that the CuO surface is reduced to Cu2O at approximately 360 K and that complete reduction from Cu2O to metallic Cu occurs at 780 K.

Synthetic cannabinoid detection in patients admitted for drug rehabilitation in the United Arab Emirates.

This paper describes the investigation of synthetic cannabinoid news psychoactive substances in drug rehabilitation patients in the UAE. This represents the latest data for such drugs in the Gulf region.

Short- and long-term stability of synthetic cathinones and dihydro-metabolites in human urine samples.

PURPOSE: Synthetic cathinones constitute the second largest group of new psychoactive substances, which are often used for recreational purposes and reported in toxicological analysis. Various factors may influence the stability of synthetic cathinones between sampling and analysis, and therefore, stability studies are required to determine the best storage conditions as well as extend the period of detection. METHODS: This study involved sixteen synthetic cathinones and ten dihydro-metabolites spiked in human urine to evaluate the stability under common storage conditions to imitate real forensic toxicology samples. The samples were stored at either room temperature (22-23 °C) for up to 3 days, refrigerated (4 °C) for up to 14 days or frozen (-40 °C) for up to 12 months, and analyzed in triplicate using a validated liquid chromatography-tandem mass spectrometry method. RESULTS: Analytes' concentrations decreased over time, although slower when stored frozen. All analytes remained stable (> 80%) for 1 month when stored frozen before losses in content were more apparent for some compounds, depending on their chemical structure. Under all storage conditions, the highest instability was observed for analytes containing halogens (i.e., chlorine or fluorine). Thus, halogenated analytes were further investigated by using liquid chromatography coupled to quadruple time-of-flight mass spectrometry to attempt identifying degradation products. CONCLUSIONS: Irrespective of parent analytes, dihydro-metabolites had improved stability at each tested temperature, which highlights their importance as appropriate urine biomarkers when retesting is required after a long period of storage.

Analytical and behavioral characterization of 1-dodecanoyl-LSD (1DD-LSD).

1-Acetyl-N,N-diethyllysergamide (1A-LSD, ALD-52) was first synthesized in the 1950s and found to produce psychedelic effects similar to those of LSD. Evidence suggests that ALD-52 serves as a prodrug in vivo and hydrolysis to LSD is likely responsible for its activity. Extension of the N1-alkylcarbonyl chain gives rise to novel lysergamides, which spurred further investigations into their structure-activity relationships. At the same time, ALD-52 and numerous homologues have emerged as recreational drugs ("research chemicals") that are available from online vendors. In the present study, 1-dodecanoyl-LSD (1DD-LSD), a novel N1-acylated LSD derivative, was subjected to analytical characterization and was also tested in the mouse head-twitch response (HTR) assay to assess whether it produces LSD-like effects in vivo. When tested in C57BL/6J mice, 1DD-LSD induced the HTR with a median effective dose (ED50) of 2.17 mg/kg, which was equivalent to 3.60 µmol/kg. Under similar experimental conditions, LSD has 27-fold higher potency than 1DD-LSD in the HTR assay. Previous work has shown that other homologues such as ALD-52 and 1-propanoyl-LSD also have considerably higher potency than 1DD-LSD in mice, which suggests that hydrolysis of the 1-dodecanoyl moiety may be comparatively less efficient in vivo. Further investigations are warranted to determine whether the increased lipophilicity of 1DD-LSD causes it to be sequestered in fat, thereby reducing its exposure to enzymatic hydrolysis in plasma and tissues. Further clinical studies are also required to assess its activity in humans and to test the prediction that it could potentially serve as a long-acting prodrug for LSD.

MDAI (5,6-methylenedioxy-2-aminoindane; 6,7-dihydro-5H-cyclopenta[f][1,3]benzodioxol-6-amine; 'sparkle'; 'mindy') toxicity: a brief overview and update.

OBJECTIVES: MDAI (5,6-methylenedioxy-2-aminoindane; 6,7-dihydro-5H-cyclopenta[f][1,3]benzodioxol-6-amine; 'sparkle'; 'mindy') is a psychoactive substance, sold primarily over the Internet and in 'head' shops as a 'legal high'. Synthesised and used as a research chemical in the 1990s, MDAI has structural similarities to MDMA (3,4-methylenedioxy-N-methylamphetamine) and shares its behavioural properties. Recreational use of MDAI appears to have started in Europe around 2007, with a noticeable increase after 2009 in the UK and other countries. Calls to National Poisons Information Services started in 2010, although there were few presentations to emergency departments by patients complaining of undesirable physical and psychiatric effects after taking MDAI. Recreational use of this drug has been reported only occasionally by online user fora. There is little scientifically based literature on the pharmacological, physiological, psychopharmacological, toxicological and epidemiological characteristics of this drug. METHODS: Recent literature (including 'grey') was searched to update what is known about MDAI, especially on its toxicity. RESULTS: The resultant information is presented, including on the first three UK deaths involving MDAI use in 2011 and 2012. 'Serotonin syndrome' appears to be a possible factor in these fatalities. CONCLUSION: It is vital that any other cases, including non-fatal overdoses, are documented so that a scientific evidence base can be established for them.

Can live bi-plane sonography reduce work-related musculoskeletal disorders of the wrist?

OBJECTIVES: Work-related musculoskeletal disorders (WMSDs) are a recognized problem affecting up to 81% of sonographers. Live bi-plane imaging is a new technology derived from matrix transducers, which allows the operator to scan in more than one plane simultaneously and can reduce the off-axis movement of the scanning arm when assessing abdominal organs. This study was performed to assess if using a bi-planar technique would reduce stressful movements of the wrist. METHODS: Twelve patients were scanned by three operators (four each) using both a standard scanning abdominal protocol and a live bi-plane abdominal protocol using an iu22 scanner (Philips Healthcare, Bothell, WA) and an X6-1 probe with a bi-axial flexible electrogoniometer measuring the postural stresses on the scanning wrist throughout the study. RESULTS: Significant flexion/extension and radial/ulnar deviations were markedly reduced using the bi-plane scanning protocol compared to the standard B-mode protocol, with an average reduction in significant repetitive wrist movements of 71.6% (p = <0.001). CONCLUSIONS: Bi-planar ultrasound scanning technique may reduce stressful movements on the scanning arm and might reduce the likelihood of WMSD assuming there are no other contributing factors.

Development and validation of a chiral LC-MS/MS method for the separation and quantification of four synthetic cathinones in human whole blood and its application in stability analysis.

Synthetic cathinones, a subclass of new psychoactive substances, have gained high popularity on the recreational drugs market over the past years. These drugs typically have a chiral center, so they may exist as two stereoisomers. Therefore the pharmacological, pharmacokinetic or metabolic properties of their enantiomers are expected to differ. However, these drugs are often synthesized and sold as a racemic mixture, and as a consequence, differentiation of their (R)- and (S)- enantiomers is relevant in clinical and forensic toxicology. Information about single enantiomers of synthetic cathinones is relatively scarce due to challenges of their chiral analysis. Hence, a sensitive and reliable liquid chromatography-tandem mass spectrometry method was developed and validated for the chiral separation and quantification of four synthetic cathinones in human whole blood samples. The method was fully validated in terms of linearity, limit of detection, limit of quantification, bias, precision, carryover, interferences, matrix effects, recovery and processed sample stability and successfully applied to evaluate the stability as well as enantioselective degradation of synthetic cathinones enantiomers under various storage conditions. For most of the analytes, significant enantioselective degradation was observed when stored at room temperature or refrigerated, with the E2-enantiomers observed to more rapidly degrade under both conditions. This is the first report concerning the stability and enantioselective degradation of synthetic cathinone enantiomers in whole blood. Moreover, the inversion study demonstrated enantiomeric inversion of R-(-)- and S-(+)-methylenedioxypyrovalerone (MDPV) in human whole blood and methanolic solution.

Influence of long-term storage temperatures and sodium fluoride preservation on the stability of synthetic cathinones and dihydro-metabolites in human whole blood.

PURPOSE: Synthetic cathinones, one of the largest groups of new psychoactive substances, represent a large analytical and interpretative challenge in forensic laboratories. Of these is the synthetic cathinones' instability in different biological samples, which may lead to drug concentration discrepancies when interpreting toxicological findings. In this study, the stability of a panel of synthetic cathinones and their dihydro-metabolites (n = 26) together with internal standard was monitored in human whole blood stored at various temperatures over 6 months. The influence of sodium fluoride as a preservative in blood collection tubes was also investigated. METHODS: Samples were extracted using a two-step liquid-liquid extraction technique, and analyzed using a validated liquid chromatography-tandem mass spectrometry method following recommendations of published guidelines. RESULTS: The influence of temperature over analytes' stability was an important element in whole blood samples, with - 40 °C being the best storage temperature for all tested analytes. Sodium fluoride did not significantly affect the stability of cathinones except at room temperature. Dihydro-metabolites displayed better stability in whole blood samples and remained detectable for a longer period of time under all tested conditions. CONCLUSIONS: The data suggest that samples containing synthetic cathinones should be analyzed immediately, if possible. Alternatively, whole blood samples should be stored frozen (at - 40 °C or lower); however, (quantitative) results should be interpreted with caution after long-term storage. The data also promote the use of dihydro-metabolites as biomarkers for synthetic cathinones intake, as these reduced metabolites may be detected for longer period of time when compared with parent drugs in whole blood samples.

A model of evaluative opinion to encourage greater transparency and justification of interpretation in postmortem forensic toxicology.

Over the past decades, the calls to improve the robustness of interpretation in forensic science have increased in magnitude. Forensic toxicology has seen limited progress in this regard. In this work, we propose a transparent interpretive pathway for use in postmortem forensic toxicology cases. This process allows the selection of the interpretive methodology based on the amount of previous information that is available for the drug(s) in question. One approach is an assessment of various pharmacological and circumstantial considerations resulting in a toxicological significance score (TSS), which is particularly useful in situations where limited information about a drug is available. When there is a robust amount of case data available, then a probabilistic approach, through the evaluation of likelihood ratios by the forensic toxicologist and of prior probabilities by the fact finder, is utilized. This methodology provides a transparent means of making an interpretive decision on the role of a drug in the cause of death. This will allow the field of forensic toxicology to take a step forward in using best practice in evaluative reporting, a tool already used by many other forensic science disciplines.

First principles simulation of reaction steps in the atomic layer deposition of titania: dependence of growth on Lewis acidity of titanocene precursor.

It is a common finding that titanocene-derived precursors do not yield TiO(2) films in atomic layer deposition (ALD) with water. For instance, ALD with Ti(OMe)(4) and water gives 0.5 Å/cycle, while TiCp*(OMe)(3) does not show any growth (Me = CH(3), Cp* = C(5)(CH(3))(5)). From mass spectrometry we found that Ti(OMe)(4) occurs in the gas phase practically exclusively as a monomer. We then used first principles density functional theory (DFT) to model the ALD reaction sequence and find the reason for the difference in growth behaviour. Both precursors adsorb initially via hydrogen-bonding. The simulations reveal that the Cp* ligand of TiCp*(OMe)(3) lowers the Lewis acidity of the Ti centre and prevents its coordination to surface O ('densification') during both of the ALD pulses. The effect of Cp* on Ti seems to be both steric (full coordination sphere) and electronic (lower electrophilicity). This crucial step in the sequence of ALD reactions is therefore not possible in the case of TiCp*(OMe)(3) + H(2)O, which means that there is no deposition of TiO(2) films.

Mechanism for the atomic layer deposition of copper using diethylzinc as the reducing agent: a density functional theory study using gas-phase molecules as a model.

We present theoretical studies based on first-principles density functional theory calculations for the possible gas-phase mechanism of the atomic layer deposition (ALD) of copper by transmetalation from common precursors such as Cu(acac)(2), Cu(hfac)(2), Cu(PyrIm(R))(2) with R = (i)Pr and Et, Cu(dmap)(2), and CuCl(2) where diethylzinc acts as the reducing agent. An effect on the geometry and reactivity of the precursors due to differences in electronegativity, steric hindrance, and conjugation present in the ligands was observed. Three reaction types, namely, disproportionation, ligand exchange, and reductive elimination, were considered that together comprise the mechanism for the formation of copper in its metallic state starting from the precursors. A parallel pathway for the formation of zinc in its metallic form was also considered. The model Cu(I) molecule Cu(2)L(2) was studied, as Cu(I) intermediates at the surface play an important role in copper deposition. Through our study, we found that accumulation of an LZnEt intermediate results in zinc contamination by the formation of either Zn(2)L(2) or metallic zinc. Ligand exchange between Cu(II) and Zn(II) should proceed through a Cu(I) intermediate, as otherwise, it would lead to a stable copper molecule rather than copper metal. Volatile ZnL(2) favors the ALD reaction, as it carries the reaction forward.

A Quantitative LC-MS/MS Method for the Detection of 16 Synthetic Cathinones and 10 Metabolites and Its Application to Suspicious Clinical and Forensic Urine Samples.

BACKGROUND: Synthetic cathinones currently represent one of the most predominant (sub)-classes of new psychoactive substance (NPS) in illicit drug markets. Despite the increased concerns caused by the constant introduction of new analogues, these drugs are not commonly assayed in routine drug testing procedures and may not be detected in standard screening procedures. This study presents a validated liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the detection and quantification of 16 synthetic cathinones and 10 metabolites in human urine. METHODS: The method was validated for all analytes using published guidelines. The evaluated parameters achieved acceptable values according to the set criteria. Potential abuse of synthetic cathinones was investigated in suspicious urine samples from Saudi Arabia originating from workplace drug testing, pre-employment and Accident & Emergency (A&E). Such samples generated a presumptive positive immunoassay for amphetamine; however, they yielded a negative LC-MS/MS confirmation for this analyte, following the recommended cutoff values of Substance of Abuse and Mental Health Services Administration (SAMHSA) guidelines. RESULTS: 5.8% of the analyzed samples were found to contain at least one target analyte, namely mephedrone and N-ethylpentylone, as well as their dihydro-metabolites. The results also revealed polydrug use with the synthetic cathinones being present together with other classical stimulant drugs. CONCLUSIONS: This is the first report of NPS use in Saudi Arabia with respect to designer stimulant drugs. Confirmatory urine analyses for suspicious stimulant use should extend beyond classical stimulants to cover a broad range of NPSs and their metabolites in order to report any otherwise potentially undetected/new analyte.

Correct positioning for hip radiographs allows reliable measurement of hip displacement in cerebral palsy.

AIM: The pelvic radiograph in children with cerebral palsy (CP) can inform the degree of hip displacement by calculation of the migration percentage. However, concerns have arisen about the reliability of this measurement. The present study examined the reliability of radiographic assessment of displacement and the importance of positioning and reporting experience. METHOD: Two pelvic radiographs, taken at least an hour apart, were performed in 20 children (total 40 hips) in the standard position by a trained paediatric radiographer. Children (13 males, seven females) were aged 30 months to 10 years with severe bilateral spastic CP in Gross Motor Function Classification System levels IV (n=10) and V (n=10). The migration percentage of each hip was measured on two occasions 3 months apart by two experienced radiologists independently. Comparisons of migration percentage were made in three ways by (1) the same observer at the same time, (2) the same observer 3 months apart, and (3) different observers 3 months apart. RESULTS: Migration percentage (mean [SD]) was (1) 3.2% (3.5), (2) 3.3% (3.2), and (3) 3.7% (3.8) respectively. INTERPRETATION: Reliable measures of migration percentage can be obtained with correct positioning and if reported by suitably experienced radiologists, making this a valid surveillance method. Clinical decisions can be made taking into account an expected error in hip displacement measurements.

TiCp*(OMe)3 versus Ti(OMe)4 in atomic layer deposition of TiO2 with water--ab initio modelling of atomic layer deposition surface reactions.

It is a common finding that titanocene-derived precursors do not yield TiO2 films in ALD with water. For instance, ALD with Ti(OMe)4 and water gives 0.5 A/cycle, while TiCp*(OMe)3 does not show any growth (Me=CH3, Cp* = C5(CH3)5). This is apparently in contradiction with the computed reactivity of the ligands: the energetics of hydrolysis of the gas-phase precursor indicate that TiCp*(OMe)3 is more reactive to ligand elimination than Ti(OMe)4. However such a model of precursor reactivity neglects surface reactions such as adsorption, diffusion and desorption, all of which can have an important effect on ALD growth rate. A more accurate model of the surface reaction is needed to find the reason for the different behaviours of Ti(OMe)4 and TiCp*(OMe)3 in the ALD process. The more realistic surface model is a TiO2 slab that is periodic in three dimensions. These calculations reveal that TiCp*(OMe)3 does not chemisorb in the usual way because of extreme crowding of the Ti centre by Cp* and that this prevents ALD growth.