A High-Quality Genome Assembly for Cercospora janseana, Causal Agent of Narrow Brown Leaf Spot of Rice.

Cercospora janseana causes narrow brown leaf spot of rice. A nearly complete telomere-to-telomere reference genome was assembled with a combination of Oxford Nanopore and Illumina sequences. The genome assembly has a total length of 39,075,509 bp and consists of 15 chromosomes, 14 of which have telomeric repeats at both ends. The assembly N50 is 2.97 Mb and the L50 is five contigs. RNA-seq-mediated gene annotation identified 10,850 genes, including 955 predicted secreted proteins and 361 predicted effector proteins. This highly contiguous and almost complete C. janseana reference genome will be a vital resource for further investigation of host-pathogen interactions and genome evolution within this pathosystem. [Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

An efficient method for screening rice breeding lines against races of Magnaporthe oryzae.

Rice blast, caused by Magnaporthe oryzae, is the most destructive rice disease worldwide. The disease symptoms are usually expressed on the leaf and panicle. The leaf disease intensity in controlled environmental conditions is frequently quantified using a 0-5 scale, where 0 represents the absence of symptoms and 5 represents large eyespot lesions. However, this scale restricts the qualitative classification of the varieties into intermediate resistant and susceptible categories. Here we develop a 0-6 scale for blast disease that allows proper assignment of rice breeding lines and varieties into six resistance levels (highly resistant, resistant, moderate resistant, moderate susceptible, susceptible, and highly susceptible). We evaluated 41 common rice varieties against four major blast races (IB1, IB17, IB49, and IE1-K). Varieties carrying the Pi-ta gene were either highly resistant, resistant, or moderate resistant to IB17. The IE1-K race was able to break Pi-ta-mediate resistance of the rice varieties. The Pi-z gene conferred resistance to the IB17 and IE1-K races. The varieties M201, Cheniere, and Frontier were highly susceptible (score 6; 100% disease) to the race IE1-K. Moreover, varieties that were resistant or susceptible to all four blast races also showed similar levels of resistance/susceptibility to blast disease in the field. Taken together, our data proved that the 0-6 blast scale can efficiently determine the resistance levels of rice varieties against major blast races. This robust method will assist rice breeding programs to incorporate durable resistance against major and emerging blast races.

Identification and mapping of a novel resistance gene to the rice pathogen, Cercospora janseana.

KEY MESSAGE: The genetic architecture of resistance to Cercospora janseana was examined, and a single resistance locus was identified. A SNP marker was identified and validated for utilization in U.S. breeding germplasm Cercospora janseana (Racib.) is a fungal pathogen that causes narrow brown leaf spot (NBLS) in rice. Although NBLS is a major disease in the southern United States and variation in resistance among U.S. rice germplasm exists, little is known about the genetic architecture underlying the trait. In this study, a recombinant inbred line population was evaluated for NBLS resistance under natural disease infestation in the field across three years. A single, large-effect QTL, CRSP-2.1, was identified that explained 81.4% of the phenotypic variation. The QTL was defined to a 532 kb physical interval and 13 single nucleotide polymorphisms (SNPs) were identified across the region to characterize the haplotype diversity present in U.S. rice germplasm. A panel of 387 U.S. rice germplasm was genotyped with the 13 haplotype SNPs and phenotyped over two years for NBLS resistance. Fourteen haplotypes were identified, with six haplotypes accounting for 94% of the panel. The susceptible haplotype from the RIL population was the only susceptible haplotype observed in the U.S. germplasm. A single SNP was identified that distinguished the susceptible haplotype from all resistant haplotypes, explaining 52.7% of the phenotypic variation for NBLS resistance. Pedigree analysis and haplotype characterization of historical germplasm demonstrated that the susceptible haplotype was introduced into Southern U.S. germplasm through the California line L-202 into the Louisiana variety Cypress. Cypress was extensively used as a parent over the last 25 years, resulting in the susceptible CRSP-2.1 allele increasing in frequency from zero to 44% in the modern U.S. germplasm panel.

Genetic architecture of aluminum tolerance in rice (Oryza sativa) determined through genome-wide association analysis and QTL mapping.

Aluminum (Al) toxicity is a primary limitation to crop productivity on acid soils, and rice has been demonstrated to be significantly more Al tolerant than other cereal crops. However, the mechanisms of rice Al tolerance are largely unknown, and no genes underlying natural variation have been reported. We screened 383 diverse rice accessions, conducted a genome-wide association (GWA) study, and conducted QTL mapping in two bi-parental populations using three estimates of Al tolerance based on root growth. Subpopulation structure explained 57% of the phenotypic variation, and the mean Al tolerance in Japonica was twice that of Indica. Forty-eight regions associated with Al tolerance were identified by GWA analysis, most of which were subpopulation-specific. Four of these regions co-localized with a priori candidate genes, and two highly significant regions co-localized with previously identified QTLs. Three regions corresponding to induced Al-sensitive rice mutants (ART1, STAR2, Nrat1) were identified through bi-parental QTL mapping or GWA to be involved in natural variation for Al tolerance. Haplotype analysis around the Nrat1 gene identified susceptible and tolerant haplotypes explaining 40% of the Al tolerance variation within the aus subpopulation, and sequence analysis of Nrat1 identified a trio of non-synonymous mutations predictive of Al sensitivity in our diversity panel. GWA analysis discovered more phenotype-genotype associations and provided higher resolution, but QTL mapping identified critical rare and/or subpopulation-specific alleles not detected by GWA analysis. Mapping using Indica/Japonica populations identified QTLs associated with transgressive variation where alleles from a susceptible aus or indica parent enhanced Al tolerance in a tolerant Japonica background. This work supports the hypothesis that selectively introgressing alleles across subpopulations is an efficient approach for trait enhancement in plant breeding programs and demonstrates the fundamental importance of subpopulation in interpreting and manipulating the genetics of complex traits in rice.

High-throughput two-dimensional root system phenotyping platform facilitates genetic analysis of root growth and development.

High-throughput phenotyping of root systems requires a combination of specialized techniques and adaptable plant growth, root imaging and software tools. A custom phenotyping platform was designed to capture images of whole root systems, and novel software tools were developed to process and analyse these images. The platform and its components are adaptable to a wide range root phenotyping studies using diverse growth systems (hydroponics, paper pouches, gel and soil) involving several plant species, including, but not limited to, rice, maize, sorghum, tomato and Arabidopsis. The RootReader2D software tool is free and publicly available and was designed with both user-guided and automated features that increase flexibility and enhance efficiency when measuring root growth traits from specific roots or entire root systems during large-scale phenotyping studies. To demonstrate the unique capabilities and high-throughput capacity of this phenotyping platform for studying root systems, genome-wide association studies on rice (Oryza sativa) and maize (Zea mays) root growth were performed and root traits related to aluminium (Al) tolerance were analysed on the parents of the maize nested association mapping (NAM) population.

Molecular mapping and characterization of QTLs for grain quality traits in a RIL population of US rice under high nighttime temperature stress.

Elevated nighttime temperatures resulting from climate change significantly impact the rice crop worldwide. The rice (Oryza sativa L.) plant is highly sensitive to high nighttime temperature (HNT) during grain-filling (reproductive stage). HNT stress negatively affects grain quality traits and has a major impact on the value of the harvested rice crop. In addition, along with grain dimensions determining rice grain market classes, the grain appearance and quality traits determine the rice grain market value. During the last few years, there has been a major concern for rice growers and the rice industry over the prevalence of rice grains opacity and the reduction of grain dimensions affected by HNT stress. Hence, the improvement of heat-stress tolerance to maintain grain quality of the rice crop under HNT stress will bolster future rice value in the market. In this study, 185 F12-recombinant inbred lines (RILs) derived from two US rice cultivars, Cypress (HNT-tolerant) and LaGrue (HNT-sensitive) were screened for the grain quality traits grain length (GL), grain width (GW), and percent chalkiness (%chalk) under control and HNT stress conditions and evaluated to identify the genomic regions associated with the grain quality traits. In total, there were 15 QTLs identified; 6 QTLs represented under control condition explaining 3.33% to 8.27% of the phenotypic variation, with additive effects ranging from - 0.99 to 0.0267 on six chromosomes and 9 QTLs represented under HNT stress elucidating 6.39 to 51.53% of the phenotypic variation, with additive effects ranging from - 8.8 to 0.028 on nine chromosomes for GL, GW, and % chalk. These 15 QTLs were further characterized and scanned for natural genetic variation in a japonica diversity panel (JDP) to identify candidate genes for GL, GW, and %chalk. We found 6160 high impact single nucleotide polymorphisms (SNPs) characterized as such depending on their type, region, functional class, position, and proximity to the gene and/or gene features, and 149 differentially expressed genes (DEGs) in the 51 Mbp genomic region comprising of the 15 QTLs. Out of which, 11 potential candidate genes showed high impact SNP associations. Therefore, the analysis of the mapped QTLs and their genetic dissection in the US grown Japonica rice genotypes at genomic and transcriptomic levels provide deep insights into genetic variation beneficial to rice breeders and geneticists for understanding the mechanisms related to grain quality under heat stress in rice.

Genetic Characterization of the Partial Disease Resistance of Rice to Bacterial Panicle Blight and Sheath Blight by Combined QTL Linkage and QTL-seq Analyses.

Bacterial panicle blight (BPB) and sheath blight (SB) are major diseases of rice and few cultivars have shown a high level of resistance to these diseases. A recombinant inbred line (RIL) population developed from the U.S. cultivars Jupiter (moderately resistant) and Trenasse (susceptible) was investigated to identify loci associated with the partial disease resistance to BPB and SB. Disease phenotypes in BPB and SB, as well as the days-to-heading (DTH) trait, were evaluated in the field. DTH was correlated to BPB and SB diseases, while BPB was positively correlated to SB in the field trials with this RIL population. Genotyping was performed using Kompetitive Allele Specific PCR (KASP) assays and whole-genome sequence (WGS) analyses. Quantitative trait locus (QTL) mapping and bulk segregant analysis using a set of WGS data (QTL-seq) detected a major QTL on the upper arm of chromosome 3 for BPB, SB, and DTH traits within the 1.0-1.9 Mb position. Additional QTLs associated with BPB and SB were also identified from other chromosomes by the QTL-seq analysis. The QTLs identified in this study contain at least nine candidate genes that are predicted to have biological functions in defense or flowering. These findings provide an insight into the complex nature of the quantitative resistance to BPB and SB, which may also be closely linked to the flowering trait.

Discovery and Validation of Grain Shape Loci in U.S. Rice Germplasm Through Haplotype Characterization.

Rice grain shape is a major determinant of rice market value and the end-use. We mapped quantitative trait loci (QTL) for grain shape traits in a bi-parental recombinant inbred line population (Trenasse/Jupiter) and discovered two major grain length QTLs-qGL3.1 and qGL7.1. Previously, a major grain shape gene GS3 was reported in the qGL3.1 region and grain length gene GL7 was reported to be encompassing qGL7.1 locus. The re-sequencing SNP data on the International Rice Research Institute (IRRI) 3K Rice Genome Project (RGP) panel were obtained from the IRRI SNP-Seek database for both genes and haplotype diversity was characterized for each gene in this diverse panel. United States rice germplasm was not well represented in the IRRI 3K RGP database. Therefore, a minimum SNP set was identified for each gene that could differentiate all the characterized haplotypes. These haplotypes in the 3K RGP panel were screened across 323 elite U.S. genotypes using the minimum SNP set. The screening of haplotypes and phenotype association confirmed the role of GS3 under qGL3.1. However, screening of the GL7 haplotypes in the U.S. germplasm panel showed that GL7 did not play a role in qGL7.1, and in addition, GL7.1 did not segregate in the Trenasse/Jupiter RIL population. This concluded that qGL7.1 is a novel QTL discovered on chr7 for grain shape in the Trenasse/Jupiter RIL population. A high-throughput KASP-based SNP marker for each locus (GS3 and qGL7.1) was identified and validated in elite U.S. rice germplasm to be used in an applied rice breeding program.

Development and validation of an optimized marker set for genomic selection in southern U.S. rice breeding programs.

The potential of genomic selection (GS) to increase the efficiency of breeding programs has been clearly demonstrated; however, the implementation of GS in rice (Oryza sativa L.) breeding programs has been limited. In recent years, efforts have begun to work toward implementing GS into the Louisiana State University (LSU) Agricultural Center rice breeding program. One of the first steps for successful GS implementation is to establish a suitable marker set for the target germplasm and a reliable, cost-effective genotyping platform capable of providing informative marker data with an adequate turnaround time. The objective of this study was to develop a marker set for routine GS and demonstrate its effectiveness in southern U.S. rice germplasm. The utility of the resulting marker set, the LSU500, for GS applications was demonstrated using four years of breeding data across 7,607 experimental lines and four elite biparental populations. The predictive ability of GS ranged from 0.13 to 0.78 for key traits across different market classes and yield trials. Comparisons between phenotypic selection and GS within biparental populations demonstrates similar performance of GS compared with phenotypic selection in predicting future performance. The prediction accuracies obtained with the LSU500 marker set demonstrates the utility of this marker set for cost-effective GS applications in southern U.S. rice breeding programs. The LSU500 marker set has been established through the genotyping service provider Agriplex Genomics, and in the future, it will undergo improvements to reduce the cost and increase the accuracy of GS.

A SNP marker set was developed for genomic selection in southern U.S. rice breeding programs. Predictive ability across target germplasm was shown with 3 yr of data (4,078 lines). Within-population predictive ability was shown across four biparental populations. Genomic and phenotypic selection ability to predict future performance was compared.

Development of a novel aluminum tolerance phenotyping platform used for comparisons of cereal aluminum tolerance and investigations into rice aluminum tolerance mechanisms.

The genetic and physiological mechanisms of aluminum (Al) tolerance have been well studied in certain cereal crops, and Al tolerance genes have been identified in sorghum (Sorghum bicolor) and wheat (Triticum aestivum). Rice (Oryza sativa) has been reported to be highly Al tolerant; however, a direct comparison of rice and other cereals has not been reported, and the mechanisms of rice Al tolerance are poorly understood. To facilitate Al tolerance phenotyping in rice, a high-throughput imaging system and root quantification computer program was developed, permitting quantification of the entire root system, rather than just the longest root. Additionally, a novel hydroponic solution was developed and optimized for Al tolerance screening in rice and compared with the Yoshida's rice solution commonly used for rice Al tolerance studies. To gain a better understanding of Al tolerance in cereals, comparisons of Al tolerance across cereal species were conducted at four Al concentrations using seven to nine genetically diverse genotypes of wheat, maize (Zea mays), sorghum, and rice. Rice was significantly more tolerant than maize, wheat, and sorghum at all Al concentrations, with the mean Al tolerance level for rice found to be 2- to 6-fold greater than that in maize, wheat, and sorghum. Physiological experiments were conducted on a genetically diverse panel of more than 20 rice genotypes spanning the range of rice Al tolerance and compared with two maize genotypes to determine if rice utilizes the well-described Al tolerance mechanism of root tip Al exclusion mediated by organic acid exudation. These results clearly demonstrate that the extremely high levels of rice Al tolerance are mediated by a novel mechanism, which is independent of root tip Al exclusion.

Genetic Mapping Identifies Consistent Quantitative Trait Loci for Yield Traits of Rice under Greenhouse Drought Conditions.

Improving drought resistance in crops is imperative under the prevailing erratic rainfall patterns. Drought affects the growth and yield of most modern rice varieties. Recent breeding efforts aim to incorporate drought resistance traits in rice varieties that can be suitable under alternative irrigation schemes, such as in a (semi)aerobic system, as row (furrow-irrigated) rice. The identification of quantitative trait loci (QTLs) controlling grain yield, the most important trait with high selection efficiency, can lead to the identification of markers to facilitate marker-assisted breeding of drought-resistant rice. Here, we report grain yield QTLs under greenhouse drought using an F2:3 population derived from Cocodrie (drought sensitive) × Nagina 22 (N22) (drought tolerant). Eight QTLs were identified for yield traits under drought. Grain yield QTL under drought on chromosome 1 (phenotypic variance explained (PVE) = 11.15%) co-localized with the only QTL for panicle number (PVE = 37.7%). The drought-tolerant parent N22 contributed the favorable alleles for all QTLs except qGN3.2 and qGN5.1 for grain number per panicle. Stress-responsive transcription factors, such as ethylene response factor, WD40 domain protein, zinc finger protein, and genes involved in lipid/sugar metabolism were linked to the QTLs, suggesting their possible role in drought tolerance mechanism of N22 in the background of Cocodrie, contributing to higher yield under drought.

Characterization of Haplotype Diversity in the BADH2 Aroma Gene and Development of a KASP SNP Assay for Predicting Aroma in U.S. Rice.

BACKGROUND: Aroma is an important grain quality trait in rice, controlled by mutations within the BADH2 gene. The trait is simply inherited, and its importance in variety development makes it a practical target for marker-assisted selection in applied breeding programs. The predominant functional mutation within BADH2, an 8-bp indel, can be reliably detected using a PCR-based assay, but the available assays and associated genotyping platforms are insufficient for large-scale applied molecular breeding applications and are not compatible with outsourcing genotyping services. RESULTS: We first characterized SNP diversity across the BADH2 gene in a collection of 2932 rice varieties to determine the number of gene haplotypes in O. sativa. Using 297 gene-based SNPs, 11 haplotype groups were detected, and subsequently identified a minimal set of nine informative SNPs that uniquely identified the BADH2 haplotypes. These nine SNPs were developed into KASP assays and used to examine a panel of 369 U.S. rice accessions. The panel represented modern breeding germplasm and included all known aroma pedigree sources in U.S. rice. Six haplotypes were detected within the U.S. panel, of which two were found in majority (85%) of varieties. A representative set of 39 varieties from all haplotype groups was evaluated phenotypically to distinguish aromatic from non-aromatic lines. CONCLUSION: One haplotype (Hap 6) was found to be perfectly associated with the aromatic phenotype. A single KASP SNP unique to Hap 6 was demonstrated to reliably differentiate aromatic from non-aromatic rice varieties across U.S. germplasm.

An improved 7K SNP array, the C7AIR, provides a wealth of validated SNP markers for rice breeding and genetics studies.

Single nucleotide polymorphisms (SNPs) are highly abundant, amendable to high-throughput genotyping, and useful for a number of breeding and genetics applications in crops. SNP frequencies vary depending on the species and populations under study, and therefore target SNPs need to be carefully selected to be informative for each application. While multiple SNP genotyping systems are available for rice (Oryza sativa L. and its relatives), they vary in their informativeness, cost, marker density, speed, flexibility, and data quality. In this study, we report the development and performance of the Cornell-IR LD Rice Array (C7AIR), a second-generation SNP array containing 7,098 markers that improves upon the previously released C6AIR. The C7AIR is designed to detect genome-wide polymorphisms within and between subpopulations of O. sativa, as well as O. glaberrima, O. rufipogon and O. nivara. The C7AIR combines top-performing SNPs from several previous rice arrays, including 4,007 SNPs from the C6AIR, 2,056 SNPs from the High Density Rice Array (HDRA), 910 SNPs from the 384-SNP GoldenGate sets, 189 SNPs from the 44K array selected to add information content for elite U.S. tropical japonica rice varieties, and 8 trait-specific SNPs. To demonstrate its utility, we carried out a genome-wide association analysis for plant height, employing the C7AIR across a diversity panel of 189 rice accessions and identified 20 QTLs contributing to plant height. The C7AIR SNP chip has so far been used for genotyping >10,000 rice samples. It successfully differentiates the five subpopulations of Oryza sativa, identifies introgressions from wild and exotic relatives, and is useful for quantitative trait loci (QTL) and association mapping in diverse materials. Moreover, data from the C7AIR provides valuable information that can be used to select informative and reliable SNP markers for conversion to lower-cost genotyping platforms for genomic selection and other downstream applications in breeding.

Haplotype Characterization of the sd1 Semidwarf Gene in United States Rice.

CORE IDEAS: Genomic data from diverse germplasm used for application in targeted breeding germplasm. Six SNPs identified that can characterize all haplotypes present at SD1 locus in diverse rice. Three alleles of the SD1 gene identified in US rice germplasm including two semidwarf alleles. Two SNPs identified and validated that differentiate the SD1 allele present in US germplasm. KASP assays designed for both SNPs for use in high-throughput breeding applications. Plant height is an important target in US rice (Oryza sativa L.) breeding programs and the large effect of the sd1 semidwarf gene makes it a suitable target for marker-assisted selection. Although the deletion underlying the semidwarf allele is known and a gel-based DNA marker is available, this marker is not ideal for applied breeding because of throughput and cost constraints. The objectives of this study were to characterize the haplotype diversity at the SD1 locus within US rice germplasm and develop a single nucleotide polymorphism (SNP) assay for breeding applications. The International Rice Research Institute (IRRI) SNP-Seek database was used to characterize the haplotype diversity present at the SD1 locus across a set of rice accessions and seven haplotypes were identified. The US rice germplasm was not well represented in the IRRI database, so a set of six SNPs was identified that could differentiate all detected haplotypes. These SNPs were designed into Kompetitive allele specific polymerase chain reaction (KASP) assays and screened across 359 elite US genotypes. Of the seven haplotypes, two were present within the US germplasm, one of which was the semidwarf deletion allele. A third haplotype was observed within the US medium-grain germplasm and demonstrated to be a semidwarf allele derived from the induced mutation in the 'Calrose76'. Two SNPs were identified that distinguish the three SD1 haplotypes present in the US germplasm. These SNPs were validated across the US germplasm and two biparental populations.

The rice blast resistance gene Ptr encodes an atypical protein required for broad-spectrum disease resistance.

Plant resistance genes typically encode proteins with nucleotide binding site-leucine rich repeat (NLR) domains. Here we show that Ptr is an atypical resistance gene encoding a protein with four Armadillo repeats. Ptr is required for broad-spectrum blast resistance mediated by the NLR R gene Pi-ta and by the associated R gene Pi-ta2. Ptr is expressed constitutively and encodes two isoforms that are mainly localized in the cytoplasm. A two base pair deletion within the Ptr coding region in the fast neutron-generated mutant line M2354 creates a truncated protein, resulting in susceptibility to M. oryzae. Targeted mutation of Ptr in a resistant cultivar using CRISPR/Cas9 leads to blast susceptibility, further confirming its resistance function. The cloning of Ptr may aid in the development of broad spectrum blast resistant rice.

ALUMINUM RESISTANCE TRANSCRIPTION FACTOR 1 (ART1) contributes to natural variation in aluminum resistance in diverse genetic backgrounds of rice (O. sativa).

Transcription factors (TFs) regulate the expression of other genes to indirectly mediate stress resistance mechanisms. Therefore, when studying TF-mediated stress resistance, it is important to understand how TFs interact with genes in the genetic background. Here, we fine-mapped the aluminum (Al) resistance QTL Alt12.1 to a 44-kb region containing six genes. Among them is ART1, which encodes a C2H2-type zinc finger TF required for Al resistance in rice. The mapping parents, Al-resistant cv Azucena (tropical japonica) and Al-sensitive cv IR64 (indica), have extensive sequence polymorphism within the ART1 coding region, but similar ART1 expression levels. Using reciprocal near-isogenic lines (NILs) we examined how allele-swapping the Alt12.1 locus would affect plant responses to Al. Analysis of global transcriptional responses to Al stress in roots of the NILs alongside their recurrent parents demonstrated that the presence of the Alt12.1 from Al-resistant Azucena led to greater changes in gene expression in response to Al when compared to the Alt12.1 from IR64 in both genetic backgrounds. The presence of the ART1 allele from the opposite parent affected the expression of several genes not previously implicated in rice Al tolerance. We highlight examples where putatively functional variation in cis-regulatory regions of ART1-regulated genes interacts with ART1 to determine gene expression in response to Al. This ART1-promoter interaction may be associated with transgressive variation for Al resistance in the Azucena × IR64 population. These results illustrate how ART1 interacts with the genetic background to contribute to quantitative phenotypic variation in rice Al resistance.