RESUMEN
Augmented reality (AR), a technology that superimposes virtual information onto a user's direct view of real-world scenes, is considered one of the next-generation display technologies and has been attracting considerable attention. Here, we propose a flat optic AR system that synergistically integrates a polarization-independent metalens with micro light-emitting diodes (LEDs). A key component is a meticulously designed metalens with a numerical aperture of 0.25, providing a simulated focusing efficiency of approximately 76.5% at a wavelength of 532â nm. Furthermore, the laser measurement system substantiates that the fabricated metalens achieves a focusing efficiency of 70.8%. By exploiting the reversibility of light characteristics, the metalens transforms the divergent light from green micro-LEDs into a collimated beam that passes through the pupil and images on the retina. Monochromatic pixels with a size of 5×5 µm2 and a pitch of 10â µm can be distinctly resolved with a power efficiency of 50%. This work illustrates the feasibility of integrating the metalens with microdisplays, realizing a high-efficiency AR device without the need for additional optical components and showcasing great potential for the development of near-eye display applications.
RESUMEN
We propose a methodology to mitigate angular color variation in full-color micron-scale LED arrays. By simulating light field distribution for red (AlGaAs) and green/blue (GaN) light across various RGB micro-LED sizes, we can select matching light field patterns for RGB chips, reducing angular color variation from 0.0201 to 0.0030. Applying this method to full-color mini-LED assemblies achieves a reduction from 0.0128 to 0.0032 by matching light field patterns with varying substrate thicknesses. This straightforward approach aligns with current mass transfer processes, offering practical implementation.
RESUMEN
The effect of atomic-layer deposition (ALD) sidewall passivation on the enhancement of the electrical and optical efficiency of micro-light-emitting diode (µ-LED) is investigated. Various blue light µ-LED devices (from 5 × 5 µm2 to 100 × 100 µm2) with ALD-Al2O3 sidewall passivation were fabricated and exhibited lower leakage and better external quantum efficiency (EQE) comparing to samples without ALD-Al2O3 sidewall treatment. Furthermore, the EQE values of 5 × 5 and 10 × 10 µm2 devices yielded an enhancement of 73.47% and 66.72% after ALD-Al2O3 sidewall treatments process, and the output power also boosted up 69.3% and 69.9%. The Shockley-Read-Hall recombination coefficient can be extracted by EQE data fitting, and the recombination reduction in the ALD samples can be observed. The extracted surface recombination velocities are 551.3 and 1026 cm/s for ALD and no-ALD samples, respectively.
RESUMEN
A simulation scheme was developed to explore the light distribution of full-color micron-scale light-emitting diode (LED) arrays. The influences of substrate thickness, patterning, and cutting angle of the substrate on several important features, such as light field pattern, light extraction efficiency, and color variation, were evaluated numerically. An experiment was conducted; the results were consistent with simulation results for a 225 × 125 µm2 miniLED and those for an 80 × 80 µm2 microLED. Based on the simulation results, the light extraction efficiency of LED devices with a substrate increases by 67.75% over the extraction efficiency of those without a substrate. The light extraction efficiency of LED devices with a substrate increases by 113.55% when an additional patterned design is used on green and blue chips. The calculated large angle Δu'v' can be as low as 0.015 for miniLED devices.
RESUMEN
Colloidal CdSe/ZnS quantum dots (QD) enhanced micro-LEDs with sizes varying from 10 to 100 µm were fabricated and measured. The direct photolithography of quantum-dot-contained photoresists can place this color conversion layer on the top of an InGaN-based micro-LED and have a high throughput and semiconductor-grade precision. Both the uncoated and coated devices were characterized, and we determined that much higher brightness of a QD-enhanced micro-LED under the same current level was observed when compared to its AlGaInP counterpart. The color stability across the device sizes and injection currents were also examined. QD LEDs show low redshift of emission wavelength, which was recorded within 1 nm in some devices, with increasing current density from 1 to 300 A/cm2. On the other hand, the light conversion efficiency (LCE) of QD-enhanced micro-LEDs was detected to decrease under the high current density or when the device is small. The angular intensities of QD-enhanced micro-LEDs were measured and compared with blue devices. With the help of the black matrix and omnidirectional light emission of colloidal QD, we observed that the angular intensities of the red and blue colors are close to Lambertian distribution, which can lead to a low color shift in all angles. From our study, the QD-enhanced micro-LEDs can effectively increase the brightness, the color stability, and the angular color match, and thus play a promising role in future micro-display technology.
RESUMEN
The multiple light scattering of nanoporous (NP) GaN was systematically studied and applied to the color down-conversion for micro-light-emitting diode (LED) display applications. The transport mean free path (TMFP) in NP GaN is 660 nm at 450 nm (light wavelength), and it decreases with a decreasing wavelength. It was observed that the short TMFP of the NP GaN increased the light extinction coefficient at 370 nm by 11 times. Colloidal QDs were loaded into a half 4â³ wafer scale NP GaN, and 96 and 100% of light conversion efficiencies for green and red were achieved, respectively. By loading green and red QDs selectively into NP GaN mesas, we demonstrated the RGB microarrays based on the blue-violet pumping light with green and red color converting regions.