RESUMEN
Hexagonal boron nitride (hBN) is widely used as a protective layer for few-atom-thick crystals and heterostructures (HSs), and it hosts quantum emitters working up to room temperature. In both instances, strain is expected to play an important role, either as an unavoidable presence in the HS fabrication or as a tool to tune the quantum emitter electronic properties. Addressing the role of strain and exploiting its tuning potentiality require the development of efficient methods to control it and of reliable tools to quantify it. Here we present a technique based on hydrogen irradiation to induce the formation of wrinkles and bubbles in hBN, resulting in remarkably high strains of â¼2%. By combining infrared (IR) near-field scanning optical microscopy and micro-Raman measurements with numerical calculations, we characterize the response to strain for both IR-active and Raman-active modes, revealing the potential of the vibrational properties of hBN as highly sensitive strain probes.
RESUMEN
Mechanical deformations and ensuing strain are routinely exploited to tune the band gap energy and to enhance the functionalities of two-dimensional crystals. In this Letter, we show that strain leads also to a strong modification of the exciton magnetic moment in WS_{2} monolayers. Zeeman-splitting measurements under magnetic fields up to 28.5 T were performed on single, one-layer-thick WS_{2} microbubbles. The strain of the bubbles causes a hybridization of k-space direct and indirect excitons resulting in a sizable decrease in the modulus of the g factor of the ground-state exciton. These findings indicate that strain may have major effects on the way the valley number of excitons can be used to process binary information in two-dimensional crystals.
RESUMEN
We report on the innovative approaches we developed for the fabrication of site-controlled semiconductor nanostructures [e.g. quantum dots (QDs), nanowires], based on the spatially selective incorporation and/or removal of hydrogen in dilute nitride semiconductor alloys [e.g. Ga(AsN) and (InGa)(AsN)]. In such systems, the formation of stable nitrogen-hydrogen complexes removes the effects nitrogen has on the alloy properties, which in turn paves the way to the direct engineering of the material's electronic-and, thus, optical-properties: not only the bandgap energy, but also the refractive index and the polarization properties of the system can indeed be tailored with high precision and in a reversible manner. Here, lithographic approaches and/or plasmon-assisted optical irradiation-coupled to the ultra-sharp diffusion profile of hydrogen in dilute nitrides-are employed to control the hydrogen implantation and/or removal process at a nanometer scale. This results in a highly deterministic control of the spatial and spectral properties of the fabricated nanostructures, eventually obtaining semiconductor nanowires with controlled polarization properties, as well as site-controlled QDs with an extremely high control on their spatial and spectral properties. The nanostructures fabricated with these techniques, whose optical properties have also been simulated by finite-element-method calculations, are naturally suited for a deterministic coupling in optical nanocavities (i.e. photonic crystal cavities and circular Bragg resonators) and are therefore of potential interest for emerging quantum technologies.
RESUMEN
At ambient conditions, GaAs forms in the zincblende (ZB) phase with the notable exception of nanowires (NWs) where the wurtzite (WZ) lattice is also found. The WZ formation is both a complication to be dealt with and a potential feature to be exploited, for example, in NW homostructures wherein ZB and WZ phases alternate controllably and thus band gap engineering is achieved. Despite intense studies, some of the fundamental electronic properties of WZ GaAs NWs are not fully assessed yet. In this work, by using photoluminescence (PL) under high magnetic fields (B = 0-28 T), we measure the diamagnetic shift, ΔEd, and the Zeeman splitting of the band gap free exciton in WZ GaAs formed in core-shell InGaAs-GaAs NWs. The quantitative analysis of ΔEd at different temperatures (T = 4.2 and 77 K) and for different directions of Bâ allows the determination of the exciton reduced mass, µexc, in planes perpendicular (µexc = 0.052 m0, where m0 is the electron mass in vacuum) and parallel (µexc = 0.057 m0) to the c axis of the WZ lattice. The value and anisotropy of the exciton reduced mass are compatible with the electron lowest-energy state having Γ7C instead of Γ8C symmetry. This finding answers a long discussed issue about the correct ordering of the conduction band states in WZ GaAs. As for the Zeeman splitting, it varies considerably with the field direction, resulting in an exciton gyromagnetic factor equal to 5.4 and â¼0 for Bâ//c and Bââ¥c, respectively. This latter result provides fundamental insight into the band structure of wurtzite GaAs.
RESUMEN
We demonstrate triggered single-photon emission from a novel system of site-controlled quantum dots (QDs), fabricated by exploiting the hydrogen-assisted, spatially selective passivation of N atoms in dilute nitride semiconductors. Evidence of this nonclassical behavior is provided by the observation of strong antibunching in the autocorrelation histogram of the QD exciton emission line. This class of site-controlled quantum emitters can be exploited for the fabrication of new hybrid QD-nanocavity systems of interest for future quantum technologies.
RESUMEN
BACKGROUND: Cosmetic surgery and medicine are extremely interesting fields for a plastic surgeon. Lasers and lights determine ablation, contraction and regenerating stimulus in skin tissues. The aim of this study is to examine the use of infrared lights in treating facial and body skin laxity. METHODS: Between 2007 and 2011, in the Department of Plastic and Reconstructive Surgery at the Hospital San Camillo-Forlanini, 303 patients were enrolled in the study and underwent laser therapy. The laser operates in wavelength from 1100 to 1800 nm. The treated areas are: face, neck, eyebrows, abdomen, legs and buttocks. RESULTS: We have noticed no systemic complications. A case of a patient with a three days lasting erythema on both lower eyelids caused by laser therapy healed without any pharmacological therapy. Neither hyper- nor hypopigmentation of the skin was found. The satisfaction degree of patients has been: facial, neck and eyebrow lifting "very satisfactory" for 70% of the patients, "satisfactory" for 10%, "unsatisfactory" for 20%; for the other areas it was "very satisfactory" for 40%, "satisfactory" for 20% and "unsatisfactory" for 40%. CONCLUSION: The use of infrared radiation represents a valid alternative to surgical lifting, but cannot replace it. The infrared light technique used has turned out to be useful in contrasting skin laxity of the face and other parts of the body. The absence of scars and surgical risk makes this technique useable for a large number of patients.
Asunto(s)
Rayos Infrarrojos/uso terapéutico , Terapia por Luz de Baja Intensidad/métodos , Envejecimiento de la Piel , Adulto , Anciano , Anciano de 80 o más Años , Técnicas Cosméticas , Femenino , Humanos , Rayos Infrarrojos/efectos adversos , Terapia por Luz de Baja Intensidad/efectos adversos , Masculino , Persona de Mediana Edad , Satisfacción del PacienteRESUMEN
We implemented radio frequency-assisted electrostatic force microscopy (RF-EFM) to investigate the electric field response of biaxially strained molybdenum disulfide (MoS2) monolayers (MLs) in the form of mesoscopic bubbles, produced via hydrogen (H)-ion irradiation of the bulk crystal. MoS2 ML, a semiconducting transition metal dichalcogenide, has recently attracted significant attention due to its promising optoelectronic properties, further tunable by strain. Here, we take advantage of the RF excitation to distinguish the intrinsic quantum capacitance of the strained ML from that due to atomic scale defects, presumably sulfur vacancies or H-passivated sulfur vacancies. In fact, at frequencies fRF larger than the inverse defect trapping time, the defect contribution to the total capacitance and to transport is negligible. Using RF-EFM at fRF = 300 MHz, we visualize simultaneously the bubble topography and its quantum capacitance. Our finite-frequency capacitance imaging technique is noninvasive and nanoscale and can contribute to the investigation of time- and spatial-dependent phenomena, such as the electron compressibility in quantum materials, which are difficult to measure by other methods.
RESUMEN
Moiré excitons (MXs) are electron-hole pairs localised by the periodic (moiré) potential forming in two-dimensional heterostructures (HSs). MXs can be exploited, e.g., for creating nanoscale-ordered quantum emitters and achieving or probing strongly correlated electronic phases at relatively high temperatures. Here, we studied the exciton properties of WSe2/MoSe2 HSs from T = 6 K to room temperature using time-resolved and continuous-wave micro-photoluminescence also under a magnetic field. The exciton dynamics and emission lineshape evolution with temperature show clear signatures that MXs de-trap from the moiré potential and turn into free interlayer excitons (IXs) for temperatures above 100 K. The MX-to-IX transition is also apparent from the exciton magnetic moment reversing its sign when the moiré potential is not capable of localising excitons at elevated temperatures. Concomitantly, the exciton formation and decay times reduce drastically. Thus, our findings establish the conditions for a truly confined nature of the exciton states in a moiré superlattice with increasing temperature and photo-generated carrier density.
RESUMEN
Atomic deuterium (D) adsorption on free-standing nanoporous graphene obtained by ultra-high vacuum D2 molecular cracking reveals a homogeneous distribution all over the nanoporous graphene sample, as deduced by ultra-high vacuum Raman spectroscopy combined with core-level photoemission spectroscopy. Raman microscopy unveils the presence of bonding distortion, from the signal associated to the planar sp2 configuration of graphene toward the sp3 tetrahedral structure of graphane. The establishment of D-C sp3 hybrid bonds is also clearly determined by high-resolution X-ray photoelectron spectroscopy and spatially correlated to the Auger spectroscopy signal. This work shows that the low-energy molecular cracking of D2 in an ultra-high vacuum is an efficient strategy for obtaining high-quality semiconducting graphane with homogeneous uptake of deuterium atoms, as confirmed by this combined optical and electronic spectro-microscopy study wholly carried out in ultra-high vacuum conditions.
RESUMEN
Cationic cyclometalated iridium complexes containing two anionic phenylpyridine (ppy) ligands and the neutral bidentate triazole-pyridine ligand, 2-(1-substituted-1H-1,2,3-triazol-4-yl)pyridine (pytl), were investigated. The complexes display a rich and reversible electrochemical behavior, upon investigations by cyclic voltammetry in strictly aprotic conditions, that couples with excellent emission quantum yields and long lifetimes of the excited states. Therefore, in organic media, all complexes have generated intense green electrochemiluminescence (ECL) through the so-called annihilation procedure and, importantly, a modulation of the emission energy (to blue) has been easily obtained by simple fluorination of the ppy ligand. Finally, taking advantage of their remarkable solubility in water, intense ECL was also obtained from aqueous buffer solutions using the co-reactant method, thus making all the investigated complexes highly promising for their effective use as ECL labels in bioanalytical applications.
RESUMEN
Light-driven catalytic three component systems for the reduction of protons, consisting of a cyclodextrin-appended iridium complex as photosensitizer, a viologen-based electron relay, and cyclodextrin-modified platinum nanoparticles as the catalyst, were found to be capable of producing molecular hydrogen effectively in water, using a sacrificial electron donor. The modular approach introduced in this study allows the generation of several functional photo-active systems by self-assembly from a limited number of building blocks. We established that systems with polypyridine iridium complexes of general formula [Ir(ppy)(2)(pytl-R)]Cl (ppy, 2-phenylpyridine; pytl, 2-(1-substituted-1H-1,2,3-triazol-4-yl)pyridine) as photosensitizers are active in the production of H(2), with yields that under our experimental conditions are 20-35 times higher than those of the classical system with [Ru(bpy)(3)]Cl(2) (bpy, 2,2'-bipyridine), methyl viologen, and Pt. By investigating different photocatalytic systems, it was found that the amount of hydrogen produced was directly proportional to the emission quantum yield of the photosensitizer.
RESUMEN
The outstanding mechanical performances of two-dimensional (2D) materials make them appealing for the emerging fields of flextronics and straintronics. However, their manufacturing and integration in 2D crystal-based devices rely on a thorough knowledge of their hardness, elasticity, and interface mechanics. Here, we investigate the elasticity of highly strained monolayer-thick MoS2 membranes, in the shape of micrometer-sized domes, by atomic force microscopy (AFM)-based nanoindentation experiments. A dome's crushing procedure is performed to induce a local re-adhesion of the dome's membrane to the bulk substrate under the AFM tip's load. It is worth noting that no breakage, damage, or variation in size and shape are recorded in 95% of the crushed domes upon unloading. Furthermore, such a procedure paves the way to address quantitatively the extent of the van der Waals interlayer interaction and adhesion of MoS2 by studying pull-in instabilities and hysteresis of the loading-unloading cycles. The fundamental role and advantage of using a superimposed dome's constraint are also discussed.
RESUMEN
Lead halide perovskites are outstanding materials for optoelectronics, but they typically feature low stability against external agents. To overcome this drawback, LHPs based on quaternary ammonium cations, such as phenyl viologen lead iodide (PhVPI), were found to be promising candidates, being water-resistant and thermally stable. In this Letter, the optoelectronic properties of the PhVPI are investigated by a combined experimental-theoretical approach. Although the as-prepared material is photoluminescence-inactive, a short thermal (5 min @ 290 °C) or laser annealing turns PhVPI into a highly luminescent material, in the 600-1000 nm range. The PhVPI PL emission was characterized at different annealing conditions, and the structural evolution following thermal treatments was investigated by means of X-ray diffraction, Raman, and NMR spectroscopies. Besides this, the electronic structure and emission properties were investigated by density functional theory simulations. The intense optical emission and high stability make PhVPI an intriguing material for applications related to light-emitting devices.
RESUMEN
A transition from discrete optical modes to 1D photonic bands is experimentally observed and numerically studied in planar photonic-crystal (PhC) L(N) microcavities of length N. For increasing N the confined modes progressively acquire a well-defined momentum, eventually reconstructing the band dispersion of the corresponding waveguide. Furthermore, photon localization due to disorder is observed experimentally in the membrane PhCs using spatially resolved photoluminescence spectroscopy. Implications on single-photon sources and transfer lines based on quasi-1D PhC structures are discussed.
Asunto(s)
Iluminación/instrumentación , Dispositivos Ópticos , Refractometría/instrumentación , Resonancia por Plasmón de Superficie/instrumentación , Transductores , Diseño de Equipo , Análisis de Falla de Equipo , FotonesRESUMEN
Novel heteroleptic iridium complexes containing the 1-substituted-4-phenyl-1H-1,2,3-triazole (phtl) cyclometalating ligand have been synthesized. The 3+2 Huisgen dipolar cycloaddition method ('click' chemistry) was utilized to prepare a class of bidentate ligands (phtl) bearing different substituents on the triazole moiety. By using various ligands (phtl-R1 and pytl-R2) (R1 = adamantane, methyl and R2 = adamantane, methyl, beta-cyclodextrin, ursodeoxycholic acid), we prepared a small library of new luminescent ionic iridium complexes [Ir(phtr-R1)2(pytl-R2)]Cl and report on their photophysical properties. The flexibility of the clicking approach allows a straightforward control on the chemical-physical properties of the complexes by varying the nature of the substituent on the ligand.
Asunto(s)
Iridio/química , Piridinas/química , Triazoles/química , Cromatografía Líquida de Alta Presión , Ligandos , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Estructura Molecular , Espectrofotometría UltravioletaRESUMEN
Semiconductor quantum-dot (QD) systems offering perfect site control and tunable emission energy are essential for numerous nanophotonic device applications involving spatial and spectral matching of dots with optical cavities. Herein, the properties of ordered InGaAs/GaAs QDs grown by organometallic chemical vapor deposition on substrates patterned with pyramidal recesses are reported. The seeded growth of a single QD inside each pyramid results in near-perfect (<10 nm) control of the QD position. Moreover, efficient and uniform photoluminescence (inhomogeneous broadening <10 meV) is observed from ordered arrays of such dots. The QD emission energy can be finely tuned by varying 1) the pyramid size and 2) its position within specific patterns. This tunability is brought about by the patterning of both the chemical properties and the surface curvature features of the substrate, which allows local control of the adatom fluxes that determine the QD thickness and composition.
Asunto(s)
Arsénico/química , Arsenicales/química , Galio/química , Indio/química , Nanoestructuras/química , Puntos Cuánticos , Luminiscencia , Propiedades de SuperficieRESUMEN
Novel 2-(1-substituted-1H-1,2,3-triazol-4-yl)pyridine (pytl) ligands have been prepared by "click chemistry" and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)(2)(pytl-R)]Cl(2) and [Ir(ppy)(2)(pytl-R)]Cl (R=methyl, adamantane (ada), beta-cyclodextrin (betaCD)). The two diastereoisomers of the Ir complex with the appended beta-cyclodextrin, [Ir(ppy)(2)(pytl-betaCD)]Cl, were separated. The [Ru(bpy)(2)(pytl-R)]Cl(2) (R=Me, ada or betaCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Phi=0.23, tau=1000 ns) of [Ir(ppy)(2)(pytl-ada)]Cl are surprisingly enhanced in [Ir(ppy)(2)(pytl-betaCD)]Cl (Phi=0.54, tau=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the betaCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron-withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)(2)(pytl-betaCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Delta and Lambda isomers of the metal complex.
RESUMEN
At the few-atom-thick limit, transition-metal dichalcogenides (TMDs) exhibit strongly interconnected structural and optoelectronic properties. The possibility to tailor the latter by controlling the former is expected to have a great impact on applied and fundamental research. As shown here, proton irradiation deeply affects the surface morphology of bulk TMD crystals. Protons penetrate the top layer, resulting in the production and progressive accumulation of molecular hydrogen in the first interlayer region. This leads to the blistering of one-monolayer thick domes, which stud the crystal surface and locally turn the dark bulk material into an efficient light emitter. The domes are stable (>2-year lifetime) and robust, and host strong, complex strain fields. Lithographic techniques provide a means to engineer the formation process so that the domes can be produced with well-ordered positions and sizes tunable from the nanometer to the micrometer scale, with important prospects for so far unattainable applications.
RESUMEN
A giant amphiphile consisting of polystyrene end-capped with permethylated beta-cyclodextrin was synthesised and found to form vesicular structures when injected as a solution in THF into water. The ability of the cyclodextrins on the surface of the polymersomes to form inclusion complexes with hydrophobic compounds was tested by carrying out a competition experiment with a fluorescent probe sensitive to the polarity of the surrounding medium. It was found that 1-adamantol can displace the fluorescent probe from the cavities of the cyclodextrin moieties of the polymersomes. The recognition of molecules by cell membranes in nature is often based on interactions with specific membrane receptors. To mimic this behaviour, the enzyme horseradish peroxidase was modified with adamantane groups through a poly(ethylene glycol) spacer and its interaction with the polymersomes was investigated. It was established that the presence of adamantane moieties on each enzyme allowed a host-guest interaction with the multifunctional surface of the polymersomes.