Tris buffer-accelerated ligand exchange rate for instant fluorescence detection of trivalent chromium ion.

Functional nucleic acids (FNAs) have attracted a lot of attention for the rapid detection of metal ions. Cr3+ is one of the major heavy metal ions in natural waters. Due to the slow ligand exchange rate of Cr3+, the FNA-based Cr3+ sensors require long assay times, limiting the on-site applications. In this study, we report that the good's buffers containing amino and polyhydroxy groups greatly increase the ligand exchange rate of Cr3+. Using EDTA as a model coordinate ligand, the Tris buffer (100 mM, pH 7.0) showed the best acceleration effect among the eight buffers. It improved the rate constant ∼20-fold, shorten the half-time 19-fold, and lowered the activation energy ∼70% at 40 °C. The Tris buffer was then applied for sensor based on the Cr3+-binding induced fluorescence quenching of fluorescein (FAM)-labeled and single-stranded DNA (ssDNA), which shortened the assay time from 1 h to 1 min. The Tris buffer also ∼100% enhanced the fluorescence intensity of FAM, achieving the 11.4-fold lower limit of detection (LOD = 6.97 nM, S/N = 3). By the combination use of the Tris buffer and ascorbic acid, the strong interference from Cu2+, Pb2+, and Fe3+ suffered in many previous reported Cr3+ sensors was avoided. The practical application of the sensor for the detection of Cr3+ spiked in the real water samples were demonstrated with high recovery percentages. The Tris buffer could be applied for other metal ions with slow ligand exchange rate (such as V2+, Co3+ and Fe2+) to solve diverse issues such as long assay time and low synthesis yield of metal complexes, without the need of heating treatment.

Establishment of enzyme-linked immunosorbent assay for aristolochic acid.

In recent years, the nephrotoxicity and carcinogenicity of aristolochic acid have attracted worldwide attention, and the traditional Chinese medicine containing this ingredient has been banned in many places, affecting the TCM industry. To meet this challenge, researchers have developed various detection methods, such as high-performance liquid chromatography, gas chromatography-mass spectrometry and thin-layer chromatography. A rapid detection method must therefore be developed to ensure safety. A polyclonal antibody capable of recognizing aristolochic acid was prepared, and an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) was established to detect the amount of aristolochic acid in the sample to be measured. Methods Using 1-(4-chlorophenyl) cyclobutylamine as a hapten, immunogens and coating antigens were obtained by coupling with bovine serum albumin (BSA) and chicken ovalbumin (OVA) using the active ester method. UV scanning confirmed the successful coupling of the conjugate, and New Zealand white rabbits were immunized. The obtained antibody serum was screened for the best antibody by ic-ELISA detection. Use the chessboard method to determine three optimal combinations of original coating concentration and antibody dilution ratio, establish a standard curve for each combination to obtain the best combination, and establish a rapid detection method. Finally, the standard aristolochic acid A was added to the purchased apple vinegar and canned coffee for recycling experiments to verify the detection method.By changing the antigen antibody concentration, the antibody showed the highest sensitivity to aristolochic acid standard at the original coating, 1000-fold dilution, IC50 of 24.88 ng/mL, limit of detection IC10 of 3.19 ng/mL, and detection range IC20-IC80 of 6.81-90.91 ng/mL. The recovery experiments under this conditions yielded a recovery rate of 92%-105%, within reasonable limits, indicating the success of the ELISA rapid detection method. Conclusion The enzyme-linked immunoassay method established in this paper can quickly detect the content of aristolochic acid in the sample to be tested, and the antibody prepared by this method has good broad-spectrum and can detect other aristolochic acid, such as aristolochic acid A, aristolochic acid B, aristolochic acid C, and aristolochic acid D.

Enzyme-linked immunoassay for simultaneous detection of methyl parathion and sibutramine in apple cider vinegar.

Methyl parathion, a highly toxic, efficient, and persistent organophosphorus pesticide, is widely used in China. Sibutramine, a non-amphetamine central nervous system depressant, helps lose weight by disrupting hormone regulation, stimulating sympathetic nerves, and suppressing appetite. However, some unethical businesses fail to properly handle raw materials in foods like apple cider vinegar, leading to residual methyl parathion in apples or illegal excessive addition of sibutramine. Therefore, it is imperative to develop an immunoassay for the rapid detection of methyl parathion and sibutramine. The corresponding two haptens were prepared and coupled with the carrier proteins according to methyl parathion-sulfur-bovine serum protein (BSA)/chicken ovalbumin (OVA)-sibutramine (20 : 1 : excess, 15 : 1 : excess, 10 : 1 : excess, and 5 : 1 : excess), and sibutramine-BSA/OVA-methyl parathion (20 : 1 : excess, 10 : 1 : excess: 5 : 1 : excess, and 0 : 1 : excess). The result shows that the inhibition rate of the antibody obtained by methyl parathion-BSA/OVA-sibutramine (20 : 1 : excess) was higher than that of sibutramine-BSA/OVA-methyl parathion, which was 67.93%, and the concentration of methyl parathion was 8.65 ng mL-1 at this inhibition rate. Thus, methyl parathion-BSA/OVA-sibutramine (8.65 : 1 : excess) and the corresponding antibodies were selected for subsequent method establishment. By changing the concentration of the coating and antibody, the inhibition rate was found when the coating was 0.125 ng mL-1 and the antibody was diluted 4000 times. The antibody was used to develop a standard curve for the detection of sibutramine at the half-maximum inhibitory concentration (IC50) is 4.59 ng mL-1, the limit of detection (IC10) is 2.21 ng mL-1, the detection range is 2.89 to 7.28 ng mL-1, methyl p-phosphorus at the half-maximum inhibitory concentration (IC50) is 15.34 ng mL-1, the limit of detection (IC10) is 0.42 ng mL-1, the detection range is ng mL-1. Under these conditions, the recovery rate was between 88% and 102%, within reasonable limits, indicating the successful establishment of a rapid enzyme-linked ELISA assay.