Assessing human exposure to pesticides and mycotoxins: optimization and validation of a method for multianalyte determination in urine samples.

Humans are exposed to an increasing number of contaminants, with diet being one of the most important exposure routes. In this framework, human biomonitoring is considered the gold standard for evaluating human exposure to chemicals. Pesticides and mycotoxins are chemicals of special concern due to their health implications. They constitute the predominant border rejection notifications for food and feed in Europe and the USA. However, current biomonitoring studies are focused on a limited number of compounds and do not evaluate mycotoxins and pesticides together. In this study, an analytical method has been developed for the determination of 30 pesticides and 23 mycotoxins of concern in urine samples. A salting-out liquid-liquid extraction (SALLE) procedure was optimized achieving recoveries between 70 and 120% for almost all the compounds and limits as lower as when QuEChERS was applied. The compounds were then determined by liquid chromatography coupled to triple quadrupole mass spectrometry. Different chromatographic conditions and analytical columns were tested, selecting a Hypersild gold aQ column as the best option. Finally, the method was applied to the analysis of 45 urine samples, in which organophosphate and pyrethroid pesticides (detection rates (DR) of 82% and 42%, respectively) and ochratoxin A and deoxynivalenol (DR of 51% and 33%, respectively) were the most detected compounds. The proposed analytical method involves the simultaneous determination of a diverse set of pesticides and mycotoxins, including their most relevant metabolites, in human urine. It serves as an essential tool for biomonitoring the presence of highly prevalent contaminants in modern society.

A natural deep eutectic solvent as a novel dispersive solvent in dispersive liquid-liquid microextraction based on solidification of floating organic droplet for the determination of pesticide residues.

Current trends in analytical chemistry encourage the use of innocuous solvents to develop modern methods aligned with green chemistry. In this sense, natural deep eutectic solvents (NADESs) have emerged as a novel generation of green solvents which can be employed in sample treatments as an alternative to the toxic organic solvents commonly used so far. In this work, a new extraction method employs dispersive liquid-liquid microextraction based on a solid floating organic droplet (DLLME-SFO), by using a mixture composed of a less dense than water extraction solvent, 1-dodecanol, and a novel dispersive solvent, NADES. The methodology was proposed to extract and preconcentrate some pesticide residues (fipronil, fipronil-sulfide, fipronil-sulfone, and boscalid) from environmental water and white wine samples before analysis by liquid-chromatography coupled to ultraviolet detection (HPLC-UV). Limits of quantification (LOQs) lower than 4.5 µg L-1, recoveries above 80%, and precision, expressed as RSD, below 15% were achieved in both samples showing that the proposed method is a powerful, efficient, and green alternative for the determination of these compounds and, therefore, demonstrating a new application for NADES in sample preparation. In addition, the DLLME-SFOD-HPLC-UV method was evaluated and compared with other reported approaches using the Analytical GREEnness metric approach, which highlighted the greenness of the proposed method.

Determination of the Main Ergot Alkaloids and Their Epimers in Oat-Based Functional Foods by Ultra-High Performance Liquid Chromatography Tandem Mass Spectrometry.

An ultra-high performance liquid chromatography coupled to tandem mass spectrometry method is proposed for the determination of the major ergot alkaloids (ergometrine, ergosine, ergotamine, ergocornine, ergokryptine, ergocristine) and their epimers (ergometrinine, ergosinine, ergotaminine, ergocorninine, ergokryptinine, and ergocristinine) in oat-based foods and food supplements. A modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure was applied as sample treatment, reducing the consumption of organic solvent and increasing sensitivity. This method involved an extraction with acetonitrile and ammonium carbonate (85:15, v/v) and a clean-up step based on dispersive solid-phase extraction, employing a mixture of C18/Z-Sep+ as sorbents. Procedural calibration curves were established and limits of quantification were below 3.2 µg/kg for the studied compounds. Repeatability and intermediate precision (expressed as RSD%) were lower than 6.3% and 15%, respectively, with recoveries ranging between 89.7% and 109%. The method was applied to oat-based products (bran, flakes, flour, grass, hydroalcoholic extracts, juices, and tablets), finding a positive sample of oat bran contaminated with ergometrine, ergosine, ergometrinine, and ergosinine (total content of 10.7 µg/kg).

Determination of principal ergot alkaloids in swine feeding.

BACKGROUND: Ergot alkaloids are secondary metabolites produced by fungi in the genus Claviceps. They contaminate a large variety of cereals, such as rye, triticale, wheat and barley. The ingestion of contaminated cereals might cause adverse health effects in humans and animals. In fact, pigs, cattle, sheep, and poultry are involved in sporadic outbreaks and, although there are several studies about occurrence of ergot alkaloids in grain cereals, there are scarce studies focused on compound feed. RESULTS: Twelve ergot alkaloids have been quantified in 228 feed samples intended for swine. The analytes were extracted using QuEChERS with Z-Sep+ as sorbent in the clean-up step, which reduced the matrix effect, allowing limits of quantification between 2.1 and 21.7 µg kg-1 . The analytes were subsequently quantified by ultra-high-performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS). A total of 29 samples (12.7%) revealed contamination by at least one ergot alkaloid, and among contaminated samples, 65% were contaminated by more than one. Only 6 of 12 target ergot alkaloids showed concentrations above the limit of quantification. The concentrations for individual ergot alkaloids ranged between 5.9 µg kg-1 for ergosinine to 145.3 µg kg-1 for ergometrine (the predominant ergot alkaloid), while the total ergot alkaloid content ranged from 5.9 to 158.7 µg kg-1 . CONCLUSIONS: The occurrence of ergot alkaloids in feed samples in Spain seems to be lower than in other regions of Europe. All the samples fulfilled current recommendations of the feed industry about practical limits for ergot alkaloids in pig feeds. This suggests that the feeds are safe for pig consumption, regarding the presence of ergot alkaloids. © 2021 Society of Chemical Industry.

A first approach using micellar electrokinetic capillary chromatography for the determination of fipronil and fipronil-sulfone in eggs.

Fipronil is an insecticide that is not approved in the European Union in food. In 2017, fipronil was involved in a European health alert due to its presence in fresh hen eggs because of an illicit use in poultry farms, so reliable methods are needed to determine fipronil and its main metabolites in these matrixes. In this work, we report the first approach to the study of fipronil and two metabolites, fipronil-sulfone and fipronil-sulfide by CE. MEKC mode was employed using a solution of 50 mM ammonium perfluorooctanoate pH 9.0 with 10% (v/v) methanol as background electrolyte. The proposed method was combined with a simple sample treatment based on salting-out assisted LLE (SALLE) using acetonitrile as extraction solvent and ammonium sulfate as salt. The SALLE-MEKC-UV method allowed the simultaneous quantification of fipronil and fipronil-sulfone. Validation parameters yielded satisfactory results, with precision, expressed as relative SD, below 14% and recoveries higher than 83%. Limits of detection were 90 µg/kg for fipronil and 150 µg/kg for fipronil-sulfone, so in terms of sensitivity further studies of sample treatments allowing extra preconcentration or the use of more sensitive detection, such as MS, would be needed.

Micellar electrokinetic chromatography as efficient alternative for the multiresidue determination of seven neonicotinoids and 6-chloronicotinic acid in environmental samples.

A simple, sensitive, and efficient method has been developed for the determination of the seven neonicotinoid insecticides commercially available (imidacloprid, thiacloprid, clothianidin, thiamethoxam, acetamiprid, nitenpyram, and dinotefuran) and the main metabolite 6-chloronicotinic acid. Micellar electrokinetic chromatography (MEKC) mode was applied, using 48.5 cm of total length capillary (50 µm i.d.) with an extended light-path capillary (150 µm). The running electrolyte consisted of 25 mM sodium tetraborate buffer (pH 9.2) containing 120 mM of sodium dodecyl sulfate and 15% of methanol (v/v). A voltage of 27 kV and a temperature of 25 °C were applied. Samples dissolved in deionized water were hydrodynamically injected at 50 mbar for 12 s, achieving the analysis in less than 12 min. Diode array detection (DAD) was performed at 220, 254, and 270 nm, depending on the analyte. Two different methodologies as sample treatments were developed; for water samples, solid-phase extraction was checked using different cartridges (C18, Oasis® HLB, Oasis® HLB Prime, and Strata-X), being the best option Oasis® HLB for preconcentration and cleanup. In the case of soil samples, a simple solid-liquid extraction was applied using a mixture of 1:3 (v/v) acetonitrile/dichloromethane. Satisfactory linearity, trueness, and precision were achieved, with detection limits in the range of 0.1-0.4 µg L-1 for river water and 1.0-2.9 µg kg-1 for soil samples. Recoveries in the range of 80-107% for all of the assayed neonicotinoids in water samples of different origin and 73-92% for soil samples were achieved.

Capillary liquid chromatography as an effective method for the determination of seven neonicotinoid residues in honey samples.

A new analytical method based on capillary liquid chromatography with diode array detection has been developed for the simultaneous quantification of seven neonicotinoid insecticides commercially available (imidacloprid, thiacloprid, clothianidin, thiamethoxam, acetamiprid, nitenpyram, and dinotefuran) in honey samples. The separation was achieved in a Zorbax XDB-C18 column (150 × 0.5 mm id, 5 µm), with a mobile phase consisting of ultrapure water (solvent A) and acetonitrile (solvent B) at a flow rate of 10 µL/min. Capillary column was thermostated at 25°C during the analysis and 254 or 270 nm was established as detection wavelength, depending on the analyte. Furthermore, full loop injection mode (8 µL) was selected, using water as injection solvent. Finally, the optimized method was applied to the analysis of neonicotinoid residues in honey of different floral origins using dispersive liquid-liquid microextraction as sample treatment. Variables affecting the extraction efficiency were optimized, choosing methanol and dichloromethane as dispersive and extraction solvents, respectively. The method was characterized in terms of linearity ( R 2 ≥ 0.9948), repeatability, reproducibility (relative standard deviation below 4.5 and 6.3% respectively), and recoveries (≥80.5%). Detection and quantification limits were lower than 6.6 and 22.0 µg/kg for the studied analytes, respectively.

Ion Mobility Spectrometry in Food Analysis: Principles, Current Applications and Future Trends.

In the last decade, ion mobility spectrometry (IMS) has reemerged as an analytical separation technique, especially due to the commercialization of ion mobility mass spectrometers. Its applicability has been extended beyond classical applications such as the determination of chemical warfare agents and nowadays it is widely used for the characterization of biomolecules (e.g., proteins, glycans, lipids, etc.) and, more recently, of small molecules (e.g., metabolites, xenobiotics, etc.). Following this trend, the interest in this technique is growing among researchers from different fields including food science. Several advantages are attributed to IMS when integrated in traditional liquid chromatography (LC) and gas chromatography (GC) mass spectrometry (MS) workflows: (1) it improves method selectivity by providing an additional separation dimension that allows the separation of isobaric and isomeric compounds; (2) it increases method sensitivity by isolating the compounds of interest from background noise; (3) and it provides complementary information to mass spectra and retention time, the so-called collision cross section (CCS), so compounds can be identified with more confidence, either in targeted or non-targeted approaches. In this context, the number of applications focused on food analysis has increased exponentially in the last few years. This review provides an overview of the current status of IMS technology and its applicability in different areas of food analysis (i.e., food composition, process control, authentication, adulteration and safety).

Collision Cross Section (CCS) Database: An Additional Measure to Characterize Steroids.

Ion mobility spectrometry enhances the performance characteristics of liquid chromatography-mass spectrometry workflows intended to steroid profiling by providing a new separation dimension and a novel characterization parameter, the so-called collision cross section (CCS). This work proposes the first CCS database for 300 steroids (i.e., endogenous, including phase I and phase II metabolites, and exogenous synthetic compounds), which involves 1080 ions and covers the CCS of 127 androgens, 84 estrogens, 50 corticosteroids, and 39 progestagens. This large database provides information related to all the ionized species identified for each steroid in positive electrospray ionization mode as well as for estrogens in negative ionization mode. CCS values have been measured using nitrogen as drift gas in the ion mobility cell. Generally, direct correlation exists between mass-to-charge ratio ( m/ z) and CCS because both are related parameters. However, several steroids mainly steroid glucuronides and steroid esters have been characterized as more compact or elongated molecules than expected. In such cases, CCS results in additional relevant information to retention time and mass spectral data for the identification of steroids. Moreover, several isomeric steroid pairs (e.g., 5ß-androstane-3,17-dione and 5α-androstane-3,17-dione) have been separated based on their CCS differences. These results indicate that adding the CCS to databases in analytical workflows increases selectivity, thus improving the confidence in steroids analysis. Consequences in terms of identification and quantification are discussed. Quality criteria and a construction of an interlaboratory reproducibility approach are also reported for the obtained CCS values. The CCS database described here is made publicly available.

Determination of tetracyclines in human urine samples by capillary electrophoresis in combination with field amplified sample injection.

A sensitive method using CZE-UV detection has been developed for the determination of five tetracycline antibiotics in human urine samples. To improve the sensitivity of the method, an on-line preconcentration strategy, named field-amplified sample injection, has been developed, based on the electrokinetic injection of the sample, which requires only a 1:100 dilution with sample solvent before injection. Under optimum conditions, sensitivity enhancement factors ranged from 450 to 800 for the studied compounds. The applicability of the proposed method was demonstrated by the determination of these antibiotics in spiked urine samples. The limits of quantification were lower than 0.8 mg/L and the precision (intra- and inter-day), expressed as %RSD was below 14%. Recoveries ranged from 92.1 to 96.7%. Thus, the proposed procedure is a simple, fast and efficient strategy which could be used as therapeutic drug monitoring in human urine samples.

In-house validation of a rapid and efficient procedure for simultaneous determination of ergot alkaloids and other mycotoxins in wheat and maize.

A fundamental step in addressing the global problem of mycotoxins is the development of highly sensitive, multi-class extraction and detection methods. This constitutes a field of research that has in recent years enjoyed a steady advance. Such methods, generally based on liquid chromatography coupled to mass spectrometry, are widely reported successfully detecting various mycotoxins in different food and feed samples. In this work, an innovative approach to multi-class mycotoxin control is proposed, offering specific advantages: a broader inclusion of more mycotoxin classes, robust and thorough extraction for all target compounds despite their varied chemical properties, and determination of all analytes from a single injection. The method involved the extraction and quantification of the main mycotoxins produced by Aspergillus, Fusarium, and Penicillium fungi, as well as their reported derivatives, together with 12 other compounds most commonly produced by Claviceps purpurea. The popularly reported QuEChERS technique has been reduced to a simple "salting-out liquid-liquid extraction" (SO-LLE) to obtain the most efficient extraction of the aforementioned mycotoxin classes in a very short time. This is in particular extremely important in ensuring correct determination of individual ergot alkaloids, for which short and robust sample preparation as well as short analytical sequences were key for minimizing the epimerization during analysis. The analyses of wheat and maize samples were performed using ultra-high performance liquid chromatography coupled with tandem mass spectrometry. Matrix-matched calibration curves were established and limits of quantification were below the maximum levels established by the EU regulation. The precision (repeatability and intermediate precision) was lower than 13% in all cases and recoveries ranged between 60 and 98% in maize and between 62 and 103% in wheat, fulfilling the current legislation. The method was applied to study the co-occurrence of these mycotoxins in wheat (n = 13) and maize (n = 15) samples from six European countries. A successful quantification of 23 different mycotoxins, from all major classes, in 85% of wheat and 93% of maize samples was achieved.

Solid phase extraction as sample treatment for the determination of Ochratoxin A in foods: A review.

Ochratoxin A (OTA) is a mycotoxin produced by two main types of fungi, Aspergillus and Penicillium species. OTA is a natural contaminant found in a large number of different matrices and is considered as a possible carcinogen for humans. Hence, low maximum permitted levels in foods have been established by competent authorities around the world, making essential the use of very sensitive analytical methods for OTA detection. Sample treatment is a crucial step of analytical methodology to get clean and concentrated extracts, and therefore low limits of quantification. Solid phase extraction (SPE) is a useful technique for rapid and selective sample preparation. This sample treatment enables the concentration and purification of analytes from the sample solution or extract by sorption on a solid sorbent. This review is focused on sample treatment procedures based on SPE prior to the determination of OTA in food matrices, published from 2010.

Evaluation of a new modified QuEChERS method for the monitoring of carbamate residues in high-fat cheeses by using UHPLC-MS/MS.

A simple and efficient method for the determination of 28 carbamates in high-fat cheeses is proposed. The methodology is based on a modified quick, easy, cheap, effective, rugged, and safe procedure as sample treatment using a new sorbent (Z-Sep+ ) followed by ultra-high performance liquid chromatography with tandem mass spectrometry determination. The method has been validated in different kinds of cheese (Gorgonzola, Roquefort, and Camembert), achieving recoveries of 70-115%, relative standard deviations lower than 13% and limits of quantification lower than 5.4 µg/kg, below the maximum residue levels tolerated for these compounds by the European legislation. The matrix effect was lower than ±30% for all the studied pesticides. The combination of ultra-high performance liquid chromatography and tandem mass spectrometry with this modified quick, easy, cheap, effective, rugged, and safe procedure using Z-Sep+ allowed a high sample throughput and an efficient cleaning of extracts for the control of these residues in cheeses with a high fat content.

Trace determination of tetracyclines in water samples by capillary zone electrophoresis combining off-line and on-line sample preconcentration.

In this work, a sensitive and reliable method using capillary zone electrophoresis with UV detection has been developed for trace determination of tetracycline antibiotics in river, spring, and ground waters. A solid-phase extraction method using Oasis HLB was applied for off-line preconcentration and cleanup of water samples, in combination with an on-line preconcentration methodology named large volume sample stacking with polarity switching. Different parameters were optimized in order to obtain an adequate separation combined with the highest sensitivity, using 75 mM sodium carbonate (pH 10) and 1 mM EDTA as separation buffer, applying a voltage of 25 kV at 25°C. The samples were injected in water at 1 bar for 1 min, applying then -25 kV and starting the sample stacking. Sample matrix removal from the capillary was controlled by monitoring the electric current (when the 95% of the separation current is reached the stacking process is completed). The applied voltage was then switched from negative to a positive value of 25 kV in order to separate the compounds. Under optimum conditions, sensitivity enhancement factors ranged from 303 to 428 for the studied compounds. The combination of both off-line and on-line preconcentration procedures provided a total sensitivity enhancement factor about 20 000, obtaining detection limits from 67 to 167 ng/L. The precision (intra- and interday), expressed as %RSD was below 12%. Recoveries obtained from river, spring, and ground waters ranged from 87 to 96%. Thus, this procedure is suitable for monitoring these compounds in water samples.

Development of magnetic molecularly imprinted polymers for selective extraction: determination of citrinin in rice samples by liquid chromatography with UV diode array detection.

In this work, we report the synthesis of novel magnetic molecularly imprinted polymers (m-MIPs) and their application to the selective extraction of the mycotoxin citrinin (CIT) from food samples. The polymers were prepared by surface imprinting of Fe3O4 nanoparticles, using 2-naphtholic acid (2-NA) as template molecule, N-3,5-bis(trifluoromethyl)phenyl-N'-4-vinylphenyl urea and methacrylamide as functional monomers and ethyleneglycol dimethacrylate as cross-linker. The resulting material was characterized by transmission electron microscopy (TEM), and X-ray diffraction (XRD) and Fourier transform infrared spectroscopies (FT-IR). The polymers were used to develop a solid-phase extraction method (m-MISPE) for the selective recovery of CIT from rice extracts prior to its determination by HPLC with UV diode array detection. The method involves ultrasound-assisted extraction of the mycotoxin from rice samples with (7:3, v/v) methanol/water, followed by sample cleanup and preconcentration with m-MIP. The extraction (washing and elution) conditions were optimized and their optimal values found to provide CIT recoveries of 94-98 % with relative standard deviations (RSD) less than 3.4 % (n = 3) for preconcentrated sample extracts (5 mL) fortified with the analyte at concentrations over the range 25-100 µg kg(-1). Based on the results, the application of the m-MIPs facilitates the accurate and efficient determination of CIT in rice extracts.

Development of an ultrasensitive stacking technique for 5-nitroimidazole determination in untreated biological fluids by micellar electrokinetic chromatography.

Cation-selective exhaustive injection and sweeping followed by a MEKC separation is evaluated for the sensitive analysis of 5-nitroimidazoles in untreated human serum and urine. Deproteinized serum and urine samples were diluted 76 and 143 times, respectively, in a low-conductivity solvent (5.00 mM orthophosphoric acid containing 5.0% v/v methanol). Samples were electrokinetically injected at 9.8 kV for 632 s in a previously conditioned fused-silica capillary (65.0 cm × 50 µm id). Separation was performed at -30 kV and 20°C using 44 mM phosphate buffer (pH 2.5), 123 mM SDS, and 8% v/v tetrahydrofurane as BGE. Signals were monitored at 276 nm and peak area was selected as analytical response. Good linearity (R(2) ≥ 0.988) and LODs lower than 1.5 and 1.8 µg/mL were achieved in serum and urine, respectively.

On-line preconcentration strategy for the simultaneous quantification of three local anesthetics in human urine using CZE.

The simultaneous determination of usually employed anesthetics (procaine, lidocaine, and bupivacaine) has been developed and validated using CE with ultraviolet detection at 212 nm. The separation of these three drugs has been achieved in less than 7 min, using a temperature of 25ºC and 25 kV, with a 150 mM citrate buffer (pH 2.5) as BGE. Field-amplified sample injection (FASI) has been used for on-line sample preconcentration. Ultrapure water and ACN 50/50 (v/v) mixture gave the greatest enhancement factor when it was employed as an injection solvent. Injection voltage and time were optimized, being 13 kV and 13 s, the optimum values, respectively. To avoid the possible irreproducibility associated with the electrokinetic injection, an internal standard such as tetracaine, was employed. The instrumental detection limits (LOD S/N = 3) for the compounds ranged between 2.6 and 7.0 µg L(-1) and the quantitation limits (LOQ S/N = 10) between 37.8 and 55.9 µg L(-1) . The detection limits obtained in real human urine samples ranged between 55.2 and 83.6 µg L(-1) and the quantitation limits between 196.0 and 276.0 µg L(-1) . The proposed method has demonstrated its applicability to the analysis of these local anesthetics in urine samples without any pretreatment, allowing the rapid determination of these target analytes.

Capillary electrochromatography-mass spectrometry for the determination of 5-nitroimidazole antibiotics in urine samples.

The separation of eight antibiotics belonging to 5-nitroimidazole family was carried out by means of CEC coupled with MS. Preliminary experiments were carried out with ultraviolet detection in order to select the proper stationary and mobile phase. Among the different stationary phases studied (namely Lichrospher C18, 5 µm particle size; Cogent(TM) Bidentate C18, 4.2 µm; Pinnacle II™ Phenyl, 3 µm; Pinnacle II™ Cyano, 3 µm), Cogent™ Bidentate C18 (4.2 µm) gave the best performance. For CEC-MS coupling, a laboratory assembled liquid-junction-nano-spray interface was used. In order to achieve a good sensitivity, special attention was paid to both optimization of the sheath liquid composition as well as selection of the injection mode. Under optimized CEC-ESI-MS conditions, the separation was accomplished within 22 min by using a column packed with a mixture of Bidentate C18:Lichrospher Silica-60 (5 µm) 3:1 w/w, an inlet pressure of 11 bar, a voltage of 15 kV, and a mobile phase composed by 45:10:45 v/v/v ACN/MeOH/water containing ammonium acetate (5 mM pH 5). A combined hydrodynamic and electrokinetic injection of 8 bar, 15 kV, and 96 s was adopted. The method was validated in terms of repeatability and intermediate precision of retention times and peak areas, linearity, and LODs and LOQs. RSDs values were <2.9% for retention times and <16.1% for peak areas in both intraday and interday experiments. LOQ values were between 0.09 and 0.42 µg/mL for all compounds. Finally, the method was applied to the determination of three most employed 5-nitroimidazole antibiotics (metronidazole, secnidazole, and ternidazole) in spiked urine samples, subjected to a SPE procedure. Recovery values in the 67-103% range were obtained. Furthermore, for the selected antibiotics, CEC-MS(2) spectra were obtained providing the unambiguous confirmation of these drugs in urine samples.

Use of an ionic liquid-based surfactant as pseudostationary phase in the analysis of carbamates by micellar electrokinetic chromatography.

The applicability of an ionic liquid-based cationic surfactant 1-dodecyl-3-methyl-imidazolium tetrafluoroborate (C12 MImBF4 ) as pseudostationary phase in MEKC has been evaluated for the analysis of 11 carbamate pesticides (promecarb, carbofuran, metolcarb, fenobucarb, aldicarb, propoxur, asulam, benomyl, carbendazim, ethiofencarb, isoprocarb) in juice samples. Under optimum conditions (separation buffer, 35 mM NaHCO3 and 20 mM C12 MImBF4 , pH 9.0; capillary temperature 25°C; voltage -22 kV) the analysis was carried out in less than 12 min, using hydrodynamic injection (50 mbar for 7.5 s) and detection at 200 nm. For the extraction of these CRBs from juice samples, a dispersive liquid-liquid microextraction (DLLME) procedure has been proposed, by optimization of variables affecting the efficiency of the extraction. Following this treatment, sample throughput was approximately 12 samples per hour, obtaining a preconcentration factor of 20. Matrix-matched calibration curves were established using tomato juice as representative matrix (from 5 to 250 µg/L for CBZ, BY, PX, CF, FEN, ETH, ISP, and 25-250 µg/L for ASL, ALD, PRC, MTL), obtaining quantification limits ranging from 1 to 18 µg/L and recoveries from 70 to 96%, with RSDs lower than 9%.