Direct solar energy conversion on zinc-air battery.

A concept of solar energy convertible zinc-air battery (SZAB) is demonstrated through rational design of an electrode coupled with multifunction. The multifunctional electrode is fabricated using nitrogen-substituted graphdiyne (N-GDY) with large π-conjugated carbonous network, which can work as photoresponsive bifunctional electrocatalyst, enabling a sunlight-promoted process through efficient injection of photoelectrons into the conduction band of N-GDY. SZAB enables direct conversion and storage of solar energy during the charging process. Such a battery exhibits a lowered charge voltage under illumination, corresponding to a high energy efficiency of 90.4% and electric energy saving of 30.3%. The battery can display a power conversion efficiency as high as 1.02%. Density functional theory calculations reveal that the photopromoted oxygen evolution reaction kinetics originates from the transition from the alkyne bonds to double bonds caused by the transfer of excited electrons, which changes the position of highest occupied molecular orbital and lowest unoccupied molecular orbital, thus greatly promoting the formation of intermediates to the conversion process. Our findings provide conceptual and experimental confirmation that batteries are charged directly from solar energy without the external solar cells, providing a way to manufacture future energy devices.

Hierarchically structured diamond composite with exceptional toughness.

The well known trade-off between hardness and toughness (resistance to fracture) makes simultaneous improvement of both properties challenging, especially in diamond. The hardness of diamond can be increased through nanostructuring strategies1,2, among which the formation of high-density nanoscale twins - crystalline regions related by symmetry - also toughens diamond2. In materials other than diamond, there are several other promising approaches to enhancing toughness in addition to nanotwinning3, such as bio-inspired laminated composite toughening4-7, transformation toughening8 and dual-phase toughening9, but there has been little research into such approaches in diamond. Here we report the structural characterization of a diamond composite hierarchically assembled with coherently interfaced diamond polytypes (different stacking sequences), interwoven nanotwins and interlocked nanograins. The architecture of the composite enhances toughness more than nanotwinning alone, without sacrificing hardness. Single-edge notched beam tests yield a toughness up to five times that of synthetic diamond10, even greater than that of magnesium alloys. When fracture occurs, a crack propagates through diamond nanotwins of the 3C (cubic) polytype along {111} planes, via a zigzag path. As the crack encounters regions of non-3C polytypes, its propagation is diffused into sinuous fractures, with local transformation into 3C diamond near the fracture surfaces. Both processes dissipate strain energy, thereby enhancing toughness. This work could prove useful in making superhard materials and engineering ceramics. By using structural architecture with synergetic effects of hardening and toughening, the trade-off between hardness and toughness may eventually be surmounted.

Tailoring Heterostructure Growth on Liquid Metal Nanodroplets through Interface Engineering.

Liquid metal (LM) nanodroplets possess intriguing surface properties, thus offering promising potential in chemical synthesis, catalysis, and biomedicine. However, the reaction kinetics and product growth at the surface of LM nanodroplets are significantly influenced by the interface involved, which has not been thoroughly explored and understood. Here, we propose an interface engineering strategy, taking a spontaneous galvanic reaction between Ga0 and AuCl4- ions as a representative example, to successfully modulate the growth of heterostructures on the surface of Ga-based LM nanodroplets by establishing a dielectric interface with a controllable thickness between LM and reactive surroundings. Combining high-resolution electron energy-loss spectroscopy (EELS) analysis and theoretical simulation, it was found that the induced charge distribution at the interface dominates the spatiotemporal distribution of the reaction sites. Employing tungsten oxide (WOx) with varying thicknesses as the demonstrated dielectric interface of LM, Ga@WOx@Au with distinct core-shell-satellite or dimer-like heterostructures has been achieved and exhibited different photoresponsive capabilities for photodetection. Understanding the kinetics of product growth and the regulatory strategy of the dielectric interface provides an experimental approach to controlling the structure and properties of products in LM nanodroplet-involved chemical processes.

Direct Visualization of Molecular Stacking in Quasi-2D Hexagonal Ice.

Understanding ice nucleation and growth is of great interest to researchers due to its importance in the biological, cryopreservation, and environmental fields. However, microstructural investigations of ice on the molecular scale are still lacking. In this paper, a simple method is proposed to prepare quasi-2-dimensional ice Ih films, which have been characterized via cryogenic transmission electron microscope. The intersecting stacking faults of basal (BSF) and prismatic (PSF) types have been directly visualized and resolved with a notable first-time report of PSF in ice Ih. Moreover, the possible growth pathways of BSF, namely, the Ic phase, were elucidated by the theoretical calculations and the chair conformation of H2O molecules. This study offers valuable insights that can enhance researchers' understanding of the growth kinetics of crystalline ice.

Interlayer Phonon Coupling from Heavy and Light Sublayers in a Natural Van der Waals Superlattice.

Layered compounds characterized by van der Waals gaps are often associated with relatively weak interlayer particle interactions. However, in specific scenarios, these seemingly feeble forces can exert an impact on interlayer interactions through subtle energy fluctuations, which can give rise to a diverse range of physical and chemical properties, particularly intriguing in the context of thermal transport. In this study, taking a natural superlattice composed of alternately stacked PbS and SnS2 sublayers as a model, we proposed that in a superlattice, there is strong hybridization between acoustic phonons of heavy sublayers and optical phonons of light sublayers. We identified newly generated vibration modes in the superlattice, such as interlayer shear and breathing, which exhibit lower sound velocity and contribute less to heat transport compared to their parent materials, which significantly alters the thermal behaviors of the superlattice compared to its bulk counterparts. Our findings on the behavior of interlayer phonons in superlattices not only can shed light on developing functional materials with enhanced thermal dissipation capabilities but also contribute to the broader field of condensed matter physics, offering insights into various fields, including thermoelectrics and phononic devices, and may pave the way for technological advancements in these areas.

Kirkendall Effect-Driven Reversible Chemical Transformation for Reconfigurable Nanocrystals.

The potential universality of chemical transformation principles makes it a powerful tool for nanocrystal (NC) synthesis. An example is the nanoscale Kirkendall effect, which serves as a guideline for the construction of hollow structures with different properties compared to their solid counterparts. However, even this general process is still limited in material scope, structural complexity, and, in particular, transformations beyond the conventional solid-to-hollow process. We demonstrate in this work an extension of the Kirkendall effect that drives reversible structural and phase transformations between metastable metal chalcogenides (MCs) and metal phosphides (MPs). Starting from Ni3S4/Cu1.94S NCs as the initial frameworks, ligand-regulated sequential extractions and diffusion of host/guest (S2-/P3-) anions between Ni3S4/Cu1.94S and Ni2P/Cu3P phases enable solid-to-hollow-to-solid structural motif evolution while retaining the overall morphology of the NC. An in-depth mechanistic study reveals that the transformation between metastable MCs and MPs occurs through a combination of ligand-dependent kinetic control and anion mixing-induced thermodynamic control. This strategy provides a robust platform for creating a library of reconfigurable NCs with tunable compositions, structures, and interfaces.

Anisotropic Amorphization and Phase Transition in Na2 Ti3 O7 Anode Caused by Electron Beam Irradiation.

Na2 Ti3 O7 is considered one of the most promising anode materials for sodium ion batteries due to its superior safety, environmental friendliness, and low manufacturing cost. However, its structural stability and reaction mechanism still have not been fully explored. As the electron beam irradiation introduces a similar impact on the Na2 Ti3 O7 anode as the extraction of Na+ ions during the battery discharge process, the microstructure evolution of the materials is investigated by advanced electron microscopy techniques at the atomic scale. Anisotropic amorphization is successfully observed. Through the integrated differential phase contrast-scanning transmission electron microscopy technique and density functional theory calculation, a phase transition pathway involving a new phase, Na2 Ti24 O49 , is proposed with the reduction of Na atoms. Additionally, it is found that the amorphization is dominated by the surface energy and electron dose rate. These findings will deepen the understanding of structural stability and deintercalation mechanism of the Na2 Ti3 O7 anode, providing new insight into exploring the failure mechanism of electrode materials.

Atomic-Resolution Electron Microscopy Unravelling the Role of Unusual Asymmetric Twin Boundaries in the Electron-Beam-Sensitive NASICON-Type Solid Electrolyte.

An atomic-scale understanding of the role of nonperiodic features is essential to the rational design of highly Li-ion-conductive solid electrolytes. Unfortunately, most solid electrolytes are easily damaged by the intense electron beam needed for atomic-resolution electron microscopy observation, so the reported in-depth atomic-scale studies are limited to Li0.33La0.56TiO3- and Li7La3Zr2O12-based materials. Here, we observe on an atomic scale a third type of solid electrolyte, Li1.3Al0.3Ti1.7(PO4)3 (LATP), through minimization of damage induced by specimen preparation. With this capability, LATP is found to contain large amounts of twin boundaries with an unusual asymmetric atomic configuration. On the basis of the experimentally determined structure, the theoretical calculations suggest that such asymmetric twin boundaries may considerably promote Li-ion transport. This discovery identifies a new entry point for optimizing ionic conductivity, and the method presented here will also greatly benefit the mechanistic study of solid electrolytes.

Diffusion-Mediated Nucleation and Growth of fcc and bcc Nanocrystal Superlattices with Designable Assembly of Freestanding 3D Supercrystals.

Diffusion-mediated assembly of octahedral PbS nanocrystals (NCs) in a confined antisolvent environment displays a primary burst nucleation and Ostwald ripening growth of rhombic bcc supercrystals, followed by a secondary seed-based nucleation and oriented attachment growth of triangle fcc supercrystals. As the diffusion proceeds from ethanol across a sharp interface into NC-suspended toluene, a burst nucleation of supercrystal seeds occurs, and such supercrystals are quickly developed into rhombic grains that have a bcc structure. At a critical size of 10 µm, an Ostwald ripening event appears to guide the supercrystal growth. Upon grain growth above 30 µm, the fcc supercrystals start a nucleation at two symmetrical tips of individual rhombic crystals. Such fcc supercrystals are developed with a triangle shape, and two triangles are combined with one bcc rhombus in-between to form a butterfly-like bowtie stacking structure. The fcc triangle wings grow larger at a reduction of bcc rhombus cores. As the bcc cores gradually fade, such butterfly-like bowtie crystals aggregate and undergo an oriented attachment process, leading to the formation of freestanding 3D triangle crystals that have a single fcc lattice. Analysis of experimental observations and defined diffusion parameters reveals that fast solvent diffusion and high-NC concentration promote the growth of rhombic bcc supercrystals, while slow solvent diffusion and low-NC concentration accelerate the development of triangle fcc supercrystals. Upon succeeding in designable growth of 3D fcc supercrystals, this study provides designing principles for controlled fabrication of supercrystals with desired superlattices for additional engineering and applications.

Approaching Elaborate Control of the Nano-Products of Carbothermal Reduction Reaction Through In Situ Identification.

Atomic understanding of a chemical reaction can realize the programmable design and synthesis of desired products with specific compositions and structures. Through directly monitoring the phase transition and tracking the dynamic evolution of atoms in a chemical reaction, in situ transmission electron microscopy (TEM) techniques offer the feasibility of revealing the reaction kinetics at the atomic level. Nevertheless, such investigation is quite challenging, especially for reactions involving multi-phase and complex interfaces, such as the widely adopted carbothermal reduction (CTR) reactions. Herein, in-situ TEM is applied to monitor the CTR of Co3 O4 nanocubes on reduced graphene oxide nanosheets. Together with the first-principle calculation, the migration route of Co atoms during the phase transition of the CTR reaction is revealed. Meanwhile, the interfacial edge-dislocations/stress-gradient is identified as a result of the atomistic diffusion, which in turn can affect the morphology variation of the reactants. Accordingly, controllable synthesis of Co-based nanostructure with a desirable phase and structure has been achieved. This work not only provides atomic kinetic insight into CTR reactions but also offers a novel strategy for the design and synthesis of functional nanostructures for emerging energy technologies.

Selective Scatterings of Phonons and Electrons in Defective Half-Heusler Nb1- δ CoSb for the Figure of Merit zT > 1.

The recently developed defective 19-electron half-Heusler (HH) compounds, represented by Nb1- δ CoSb, possess massive intrinsic vacancies at the cation site and thus intrinsically low lattice thermal conductivity that is desirable for thermoelectric (TE) applications. Yet the TE performance of defective HHs with a maximum figure of merit (zT) <1.0 is still inferior to that of the conventional 18-electron ones. Here, a peak zT exceeding unity is obtained at 1123 K for both Nb0.7 Ta0.13 CoSb and Nb0.6 Ta0.23 CoSb, a benchmark value for defective 19-electron HHs. The improved zT results from the achievement of selective scatterings of phonons and electrons in defective Nb0.83 CoSb, using lanthanide contraction as a design factor to select alloying elements that can strongly impede the phonon propagation but weakly disturb the periodic potential. Despite the massive vacancies induced strong point defect scattering of phonons in Nb0.83 CoSb, Ta alloying is still found effective in suppressing lattice thermal conductivity while maintaining the carrier mobility almost unchanged. In comparison, V alloying significantly deteriorates the carrier transport and thus the TE performance. These results enlarge the category of high-performance HH TE materials beyond the conventional 18-electron ones and highlight the effectiveness of selective scatterings of phonons and electrons in developing TE materials even with massive vacancies.

Generalized Rapid Synthesis of Supported Nanocluster Catalyst for Mild Hydrogenation of Phenol toward KA Oil.

Homogeneous and nanometric metal clusters with unique electronic structures are promising for catalysis, however, common synthesis techniques for metal clusters suffer from large size and even metal nanocrystals attributing to their high surface energy and unsaturated configurations. Herein, a generalized rapid annealing strategy for synthesizing a series of supported metal clusters as superior catalysts is developed. Remarkably, TiO2 supported platinum nanoclusters (Pt NC/TiO2 ) exhibits the excellent catalytic activity to realize phenol hydrogenation under mild conditions. The complete phenol conversion rate and 100% selectivity toward KA oil are achieved in aqueous solution at room temperature and normal pressure. Semi-continuous scale up production of KA oil is successfully performed under mild conditions. Such excellent performance mainly originates from the partial reconstruction of Pt NC/TiO2 in aqueous phenol solution. Considering that the phenol can be produced from lignin, this study underpins a facile, sustainable, and economical route to synthesize nylon from biomass.

Engineering Phase Transition from 2H to 1T in MoSe2 by W Cluster Doping toward Lithium-Ion Battery.

Phase engineering synthesis strategy is extremely challenging to achieve stable metallic phase molybdenum diselenide for a better physicochemical property than the thermodynamically stable semiconducting phase. Herein, we introduce tungsten atom clusters into the MoSe2 layered structure, realizing the phase transition from the 2H semiconductor to 1T metallic phase at a high temperature. The combination of synchrotron radiation X-ray absorption spectroscopy, Cs-corrected transmission electron microscopy, and theoretical calculation demonstrates that the aggregation doping of W atoms is the factor of MoSe2 structure transformation. When utilizing this distinct structure as an anode component, it demonstrates outstanding rate capability and durability. After 500 cycles, this results in a specific capacity of 1007.4 mAh g-1 at 500 mA g-1. These discoveries could open the door for the future development of high-performance anodes for ion battery applications.

Controlled synthesis of transition metal oxide multi-shell structures andin situstudy of the energy storage mechanism.

Multi-shell transition metal oxide hollow spheres show great potential for applications in energy storage because of their unique multilayered hollow structure with large specific surface area, short electron and charge transport paths, and structural stability. In this paper, the controlled synthesis of NiCo2O4, MnCo2O4, NiMn2O4multi-shell layer structures was achieved by using the solvothermal method. As the anode materials for Li-ion batteries, the three multi-shell structures maintained good stability after 650 long cycles in the cyclic charge/discharge test. Thein situtransmisssion electron microscope characterization combined with cyclic voltammetry tests demonstrated that the three anode materials NiCo2O4, MnCo2O4and NiMn2O4have similar charge/discharge transition mechanisms, and the multi-shell structure can effectively buffer the volume expansion and structural collapse during lithium embedding/delithiation to ensure the stability of the electrode structure and cycling performance. The research results can provide effective guidance for the synathesis and charging/discharging mechanism of multi-shell metal oxide lithium-ion battery anode materials.

Uniaxial Strain and Hydrostatic Pressure Engineering of the Hidden Magnetism in La1-xCaxMnO3 (0 ≤ x ≤ 1/2) Thin Films.

Here, using various substrates, we demonstrate that the in-plane uniaxial strain engineering can enhance the Jahn-Teller distortions and promote selective orbital occupancy to induce an emergent antiferromagnetic insulating (AFI) phase at x = 1/3 of La1-xCaxMnO3. Such an AFI phase depends not only on the magnitude of epitaxial strain but also on the symmetry of the substrates. Using the large uniaxial strain imparted by DyScO3(001) substrate, the AFI ground state is achieved in a wide range of doping levels (0 ≤ x ≤ 1/2), leaving an extended AFI phase diagram. Moreover, it is found that hydrostatic pressure can tune the AFI phase back to a hidden ferromagnetic metallic phase, accompanied by the formation of accommodation strain. The coaction of the accommodation strain, uniaxial strain, and hydrostatic pressure produces complex phase competition and evolution, and the result may shed light on phase space control of other functional perovskites with the competing magnetic interactions.

Maldistribution of Chemical Bond Strength Inducing Exceptional Anisotropy of Thermal Conductivity in Non-Layered Materials.

Currently, the efforts to find materials with high κ anisotropy ratios mainly focus on layered materials, however, the limited quantity and lower workability comparing to non-layered ones boost the exploration of non-layered materials with high κ anisotropy ratios. Here, taking PbSnS3 , a typical non-layered orthorhombic compound, as an example, we propose that maldistribution of chemical bond strength can lead to large anisotropy of κ in non-layered materials. Our result reveals that the maldistribution of Pb-S bonds lead to obvious collective vibrations of dioctahedron chain units, resulting in an anisotropy ratio up to 7.1 at 200 K and 5.5 at 300 K, respectively, which is one of the highest ever reported in non-layered materials and even surpasses many classical layered materials such as Bi2 Te3 and SnSe. Our findings can not only broaden the horizon for exploring high anisotropic κ materials but also provide new opportunities for the application of thermal management.

Atomic-Level Pt Electrocatalyst Synthesized via Iced Photochemical Method for Hydrogen Evolution Reaction with High Efficiency.

In heterogeneous catalysis, metal particle morphology and size can influence markedly the activity. It is of great significance to rationally design and control the synthesis of Pt at the atomic level to demonstrate the structure-activity relationship toward electrocatalysis. Herein, a powerful strategy is reported to synthesize graphene-supported platinum-based electrocatalyst, that is, nanocatalysts with controllable size can be prepared by iced photochemical method, including single atoms (Pt-SA@HG), nanoclusters (Pt-Clu@HG), and nanocrystalline (Pt-Nc@HG). The Pt-SA@HG exhibits unexpected electrocatalytic hydrogen evolution reaction (HER) performances with 13 mV overpotential at 10 mA cm-2 current densities which surpass Pt-Clu@HG and Pt-Nc@HG. The in situ X-ray absorption fine structure spectroscopy (XAFS) and density functional theory (DFT) calculations determine the Pt-C3 active site is linchpin to the excellent HER performance of Pt-SA@HG. Compared with the traditional Pt-Nx coordination structure, the pure carbon coordinated Pt-C3 site is more favorable for HER. This work opens up a new way to adjust the metal particle size and catalytic performance of graphene at a multiscale level.

Nanoscale visualization of metallic electrodeposition in a well-controlled chemical environment.

Liquid phase transmission electron microscopy (TEM) provides a useful means to study a wide range of dynamics in solution with near-atomic spatial resolution and sub-microsecond temporal resolution. However, it is still a challenge to control the chemical environment (such as the flow of liquid, flow rate, and the liquid composition) in a liquid cell, and evaluate its effect on the various dynamic phenomena. In this work, we have systematically demonstrated the flow performance of anin situliquid TEM system, which is based on 'on-chip flow' driven by external pressure pumps. We studied the effects of different chemical environments in the liquid cell as well as the electrochemical potential on the deposition and dissolution behavior of Cu crystals. The results show that uniform Cu deposition can be obtained at a higher liquid flow rate (1.38µl min-1), while at a lower liquid flow rate (0.1µl min-1), the growth of Cu dendrites was observed. Dendrite formation could be further promoted byin situaddition of foreign ions, such as phosphates. The generality of this technique was confirmed by studying Zn electrodeposition. Our direct observations not only provide new insights into understanding the nucleation and growth but also give guidelines for the design and synthesis of desired nanostructures for specific applications. Finally, the capability of controlling the chemical environment adds another dimension to the existing liquid phase TEM technique, extending the possibilities to study a wide range of dynamic phenomena in liquid media.

Pt/AlGaN Nanoarchitecture: Toward High Responsivity, Self-Powered Ultraviolet-Sensitive Photodetection.

Energy-saving photodetectors are the key components in future photonic systems. Particularly, self-powered photoelectrochemical-type photodetectors (PEC-PDs), which depart completely from the classical solid-state junction device, have lately intrigued intensive interest to meet next-generation power-independent and environment-sensitive photodetection. Herein, we construct, for the first time, solar-blind PEC PDs based on self-assembled AlGaN nanostructures on silicon. Importantly, with the proper surface platinum (Pt) decoration, a significant boost of photon responsivity by more than an order of magnitude was achieved in the newly built Pt/AlGaN nanoarchitectures, demonstrating strikingly high responsivity of 45 mA/W and record fast response/recovery time of 47/20 ms without external power source. Such high solar-blind photodetection originates from the unparalleled material quality, fast interfacial kinetics, as well as high carrier separation efficiency which suggests that embracement of defect-free wide-bandgap semiconductor nanostructures with appropriate surface decoration offers an unprecedented opportunity for designing future energy-efficient and large-scale optoelectronic systems on a silicon platform.

In Situ Constructing the Kinetic Roadmap of Octahedral Nanocrystal Assembly Toward Controlled Superlattice Fabrication.

Crystallization and growth of anisotropic nanocrystals (NCs) into distinct superlattices were studied in real time, yielding kinetic details and designer parameters for scale-up fabrication of functional materials. Using octahedral PbS NC blocks, we discovered that NC assembly involves a primary lamellar ordering of NC-detached Pb(OA)2 molecules on the front-spreading solvent surfaces. Upon a spontaneous increase of NC concentration during solvent processing, PbS NCs preferentially self-assembled into an orientation-disordered face-centered cubic (fcc) superlattice, which subsequently transformed into a body-centered cubic (bcc) superlattice with single NC-orientational ordering across individual domains. Unlike the deformation-based transformation route claimed previously, this solid-solid phase transformation involved a hidden intermediate formation of a lamellar-confined liquid interface at cost of the disassembly (melting) of small fcc grains. Such highly condensed and liquidized NCs recrystallized into the stable bcc phase with an energy reduction of 1.16 kBT. This energy-favorable and high NC-fraction-driven bcc phase grew as a 2D film at a propagation rate of 0.74 µm/min, smaller than the 1.23 µm/min observed in the early nucleated fcc phase under a dilute NC environment. Taking such insights and defined parameters, we designed experiments to manipulate the NC assembly pathway and achieved scalable fabrication of a large/single bcc supercrystal with coherent ordering of NC translation and atomic plane orientation. This study not only provides a design avenue for controllable fabrication of a large supercrystal with desired superlattices for application but also sheds new light on the nature of crystal nucleation/growth and phase transformation by extending the lengths from the nanoscale into the atomic scale, molecular scale, and microscale levels.