RESUMEN
The electrooxidation of propylene presents a promising route for the production of 1,2-propylene glycol (PG) under ambient conditions. However, the C-O coupling process remains a challenge owing to the high energy barrier. In this work, we developed a highly efficient electrocatalyst of bipyridine-confined Ag single atoms on UiO-bpy substrates (Ag SAs/UiO-bpy), which exposed two in-plane coordination vacancies during reaction for the co-adsorption of key intermediates. Detailed structure and electronic property analyses demonstrate that CH3CHCH2OH* and *OH could stably co-adsorb in a square planar configuration, which then accelerates the charge transfer between them. The combination of stable co-adsorption and efficient charge transfer facilitates the C-O coupling process, thus significantly lowering its energy barrier. At 2.4 V versus a reversible hydrogen electrode, Ag SAs/UiO-bpy achieved a record-high activity of 61.9 gPG m-2 h-1. Our work not only presents a robust electrocatalyst but also advances a new perspective on catalyst design for propylene electrooxidation.
RESUMEN
The past decade has witnessed substantial progress in understanding nontrivial band topology and discovering exotic topological materials in condensed-matter physics. Recently, topological physics has been further extended to the chemistry discipline, leading to the emergence of topological catalysis. In principle, the topological effect is detectable in catalytic reactions, but no conclusive evidence has been reported yet. Herein, by precisely manipulating the topological surface state (TSS) of Bi2Se3 nanosheets through thickness control and the application of a magnetic field, we provide direct experimental evidence to illustrate topological catalysis for CO2 electroreduction. With and without the cooperation of TSS, CO2 is mainly reduced into liquid fuels (HCOOH and H2C2O4) and CO, exhibiting high (up to 90% at -1.1 V versus reversible hydrogen electrode) and low Faradaic efficiency (FE), respectively. Theoretically, the product and FE difference can be attributed to the TSS-regulated adsorption of key intermediates and the reduced barrier of the potential-determining step. Our work demonstrates the inherent correlation between band topology and electrocatalysis, paving a new avenue for designing high-performance catalysts.
RESUMEN
Air contains carbon, hydrogen, oxygen, and nitrogen elements that are essential for the constitution of amino acids. Converting the air into amino acids, powered with renewable electricity, provides a green and sustainable alternative to petrochemical-based methods that produce waste and pollution. Here, taking glycine as an example, we demonstrated the complete production chain for electrorefining amino acids directly from CO2, N2, and H2O. Such a prospective scheme was composed of three modules, linked by a spontaneous C-N bond formation process. The high-purity bridging intermediates, separated from the stepwise synthesis, boosted both the carbon selectivity from CO2 to glycine of 91.7% and nitrogen selectivity from N2 to glycine of 98.7%. Under the optimum condition, we obtained glycine with a partial current density of 160.8 mA cm-2. The high-purity solid glycine product was acquired with a separation efficiency of 98.4%. This work unveils a green and sustainable method for the abiotic creation of amino acids from the air components.
RESUMEN
For the electrooxidation of propylene into 1,2-propylene glycol (PG), the process involves two key steps of the generation of *OH and the transfer of *OH to the CâC bond in propylene. The strong *OH binding energy (EB(*OH)) favors the dissociation of H2O into *OH, whereas the transfer of *OH to propylene will be impeded. The scaling relationship of the EB(*OH) plays a key role in affecting the catalytic performance toward propylene electrooxidation. Herein, we adopt an immobilized Ag pyrazole molecular catalyst (denoted as AgPz) as the electrocatalyst. The pyrrolic N-H in AgPz could undergo deprotonation to form pyrrolic N (denoted as AgPz-Hvac), which can be protonated reversibly. During propylene electrooxidation, the strong EB(*OH) on AgPz favors the dissociation of H2O into *OH. Subsequently, the AgPz transforms into AgPz-Hvac that possesses weak EB(*OH), benefiting to the further combination of *OH and propylene. The dynamically reversible interconversion between AgPz and AgPz-Hvac accompanied by changeable EB(*OH) breaks the scaling relationship, thus greatly lowering the reaction barrier. At 2.0 V versus Ag/AgCl electrode, AgPz achieves a remarkable yield rate of 288.9 mmolPG gcat-1 h-1, which is more than one order of magnitude higher than the highest value ever reported.
RESUMEN
The interfacial structure of heterogeneous catalysts determines the reaction rate by adjusting the adsorption behavior of reaction intermediates. Unfortunately, the catalytic performance of conventionally static active sites has always been limited by the adsorbate linear scaling relationship. Herein, we develop a triazole-modified Ag crystal (Ag crystal-triazole) with dynamic and reversible interfacial structures to break such a relationship for boosting the catalytic activity of CO2 electroreduction into CO. On the basis of surface science measurements and theoretical calculations, we demonstrated the dynamic transformation between adsorbed triazole and adsorbed triazolyl on the Ag(111) facet induced by metal-ligand conjugation. During CO2 electroreduction, Ag crystal-triazole with the dynamically reversible transformation of ligands exhibited a faradic efficiency for CO of 98% with a partial current density for CO as high as -802.5 mA cm-2. The dynamic metal-ligand coordination not only reduced the activation barriers of CO2 protonation but also switched the rate-determining step from CO2 protonation to the breakage of C-OH in the adsorbed COOH intermediate. This work provided an atomic-level insight into the interfacial engineering of the heterogeneous catalysts toward highly efficient CO2 electroreduction.
RESUMEN
Mass transfer plays an important role in controlling the surface coverage of reactants and the kinetics of surface reactions, thus significantly adjusting the catalytic performance. Herein, we reported that H2O diffusion was modulated by controlling the thicknesses of the carbon black (CB) layer between the gas diffusion electrode (GDE) of Cu and the electrolyte. As a consequence, the product distribution over the GDE of Cu was effectively regulated during CO2 electroreduction. Interestingly, a volcano-type relationship between the thickness of the CB layer and the faradaic efficiency (FE) for multicarbon (C2+) products was observed over the GDE of Cu. Especially, when the applied total current density was set as 800 mA cm-2, the FE for the C2+ products over the GDE of Cu coated by a CB layer with a thickness of 6.6 µm reached 63.2%, which was 2.8 times higher than that (16.8%) over the GDE of Cu without a CB layer.
RESUMEN
Tuning the local confinement of reaction intermediates is of pivotal significance to promote C-C coupling for enhancing the selectivity for multicarbon (C2+) products toward CO2 electroreduction. Herein, we have gained insights into the confinement effect of local CO concentration for enhanced C-C coupling over core-shell Ag@Cu catalysts by tuning the pore diameters within porous Cu shells. During CO2 electroreduction, the core-shell Ag@Cu catalysts with an average pore diameter of 4.9 nm within the Cu shells (Ag@Cu-p4.9) exhibited the highest Faradaic efficiency of 73.7% for C2+ products at 300 mA cm-2 among the three Ag@Cu catalysts. Finite-element-method simulations revealed that the pores with a diameter of 4.9 nm in Cu conspicuously enhanced the local CO concentration. On the basis of in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy measurements, Ag@Cu-p4.9 exhibited the highest surface coverage of adsorbed CO intermediates with a linear adsorption configuration due to the confinement effect, thus facilitating C-C coupling.
RESUMEN
Cu-based tandem nanocrystals have been widely applied to produce multicarbon (C2+) products via enhancing CO intermediate (*CO) coverage toward CO2 electroreduction. Nevertheless, it remains ambiguous to understand the intrinsic correlation between *CO coverage and C-C coupling. Herein, we constructed a tandem catalyst via coupling CoPc with the gas diffusion electrode of Cu (GDE of Cu-CoPc). A faradaic efficiency for C2+ products of 82% was achieved over a GDE of Cu-CoPc at an applied current density of 480 mA cm-2 toward CO2 electroreduction, which was 1.8 times as high as that over the GDE of Cu. Based on in situ experiments and density functional theory calculations, we revealed that the high *CO coverage induced by CO-generating CoPc promoted the local enrichment of *CO with the top adsorption mode, thus reducing the energy barrier for the formation of OCCO intermediate. This work provides an in-depth understanding of the surface coverage-dependent mode-specific C-C coupling mechanism toward CO2 electroreduction.
RESUMEN
The two-dimensional surface or one-dimensional interface of heterogeneous catalysts is essential to determine the adsorption strengths and configurations of the reaction intermediates for desired activities. Recently, the development of single-atom catalysts has enabled an atomic-level understanding of catalytic processes. However, it remains obscure whether the conventional concept and mechanism of one-dimensional interface are applicable to zero-dimensional single atoms. In this work, we arranged the locations of single atoms to explore their interfacial interactions for improved oxygen evolution. When iridium single atoms were confined into the lattice of CoOOH, efficient electron transfer between Ir and Co tuned the adsorption strength of oxygenated intermediates. In contrast, atomic iridium species anchored on the surface of CoOOH induced inappreciable modification in electronic structures, whereas steric interactions with key intermediates at its Ir-OH-Co interface played a primary role in reducing its energy barrier toward oxygen evolution.
RESUMEN
In electrocatalysis, doping regulation has been considered as an effective method to modulate the active sites of catalysts, providing a powerful means for creating a large variety of highly efficient catalysts for various reactions. Of particular interest, there has been growing research concerning the doping of two-dimensional transition-metal compounds (TMCs) to optimize their electrocatalytic performance. Despite the previous achievements, mechanistic insights of doping regulation in TMCs for electrocatalysis are still lacking. Herein, we provide a systematic overview of doping regulation in TMCs in terms of background, preparation, impacts on physicochemical properties, and typical applications including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO2 reduction reaction, and N2 reduction reaction. Notably, we bridge the understanding between the doping regulation of catalysts and their catalytic activities via focusing on the physicochemical properties of catalysts from the aspects of vacancy concentrations, phase transformation, surface wettability, electrical conductivity, electronic band structure, local charge distribution, tunable adsorption strength, and multiple adsorption configurations. We also discuss the existing challenges and future perspectives in this promising field.
RESUMEN
Surface functionalization with atoms serves as an important strategy to modulate the catalytic activities of low-dimensional nanomaterials. Herein, we developed a facile hydrogen incorporation strategy for improving the catalytic activities of SnS2 nanosheets toward CO2 electroreduction. Compared with SnS2 nanosheets, the hydrogen-incorporated SnS2 (denoted as H-SnS2) nanosheets exhibited high current density and Faradaic efficiency (FE) for formate. At -0.9 V vs RHE, H-SnS2 nanosheets displayed a maximum FE of 93% for carbonaceous product, which rivals the activities of most Sn-based catalysts in CO2 electroreduction. Mechanistic studies disclosed that the incorporation of surface hydrogen induced the electron injection into the structures of H-SnS2 nanosheets, which largely facilitates the process of CO2 activation. Density functional theory (DFT) calculations further revealed that hydrogen incorporation decreased the energy barrier for the formation of HCOO* intermediates, thus contributing to the CO2-to-formate conversion on H-SnS2 nanosheets.
RESUMEN
CO2 electroreduction powered by renewable electricity represents a promising method to enclose anthropogenic carbon cycle. Current catalysts display high selectivity toward the desired product only over a narrow potential window due primarily to unoptimized intermediate binding. Here, we report a functional ligand modification strategy in which palladium nanoparticles are encapsulated inside metal-organic frameworks with 2,2'-bipyridine organic linkers to tune intermediate binding and thus to sustain a highly selective CO2-to-CO conversion over widened potential window. The catalyst exhibits CO faradaic efficiency in excess of 80% over a potential window from -0.3 to -1.2 V and reaches the maxima of 98.2% at -0.8 V. Mechanistic studies show that the 2,2'-bipyridine on Pd surface reduces the binding strength of both *H and *CO, a too strong binding of which leads to competing formate production and CO poison, respectively, and thus enhances the selectivity and stability of CO product.
Asunto(s)
Dióxido de Carbono , Nanopartículas del Metal , Catálisis , Electricidad , PaladioRESUMEN
Probing and understanding the intrinsic active sites of electrocatalysts is crucial to unravel the underlying mechanism of CO2 electroreduction and provide a prospective for the rational design of high-performance electrocatalysts. However, their structure-activity relationships are not straightforward because electrocatalysts might reconstruct under realistic working conditions. Herein, we employ in-situ measurements to unveil the intrinsic origin of the InN nanosheets which served as an efficient electrocatalyst for CO2 reduction with a high faradaic efficiency of 95% for carbonaceous product. During the CO2 electroreduction, InN nanosheets reconstructed to form the In-rich surface. Density functional theory calculations revealed that the reconstruction of InN led to the redistribution of surface charge that significantly promoted the adsorption of HCOO* intermediates and thus benefited the formation of formate toward CO2 electroreduction. This work establishes a fundamental understanding on the mechanism associated with self-reconstruction of heterogeneous catalysts toward CO2 electroreduction.
RESUMEN
Exploring the high-performance non-Pt electrocatalysts for oxygen reduction reaction (ORR), the bottleneck process in fuel cells, is desirable but challenging. Here, we report the Pd@PdFe core-shell icosahedra as an active and durable electrocatalyst toward ORR in alkaline conditions, which feature a three-atomic-layer tensile-strained PdFe overlayer on Pd icosahedra. Our optimized catalyst shows 2.8-fold enhancement in mass activity and 6.9-fold enhancement in specific activity than commercial Pt/C catalyst toward ORR, representing one of the best non-Pt electrocatalysts. Moreover, the boosted ORR catalysis is strongly supported by the assembled fuel cell performance using Pd@PdFe core-shell icosahedra as the cathode electrocatalyst. The density functional theory calculations reveal that the synergistic coupling of tensile strain and alloy effects enables the optimum binding strength for intermediates, thus causing the maximum activity. The present work suggests the coupling between multiple surface modulations endows larger room for the rational design of remarkable catalysts.
RESUMEN
Electroreduction of CO2 into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Coâ SAs-Pc). The anchoring of phthalocyanine with Coâ sites enabled electron transfer from Coâ sites to CO2 effectively via the π-conjugated system, resulting in high catalytic performance of CO2 electroreduction into CO. During the process of CO2 electroreduction, the Faradaic efficiency (FE) of Coâ SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Coâ SAs-Pc for CO was -11.3â mA cm-2 at -0.8â V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86â times greater than those of Coâ SAs (-0.60â mAâ cm-2 ) and commercial Co phthalocyanine (-3.95â mA cm-2 ), respectively. In an H-cell system operating at -0.8â V vs RHE over 10â h, the current density and FE for CO of Coâ SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Coâ SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO2 activation.
RESUMEN
Efforts have been devoted to achieving a highly efficient artificial synthesis of ammonia (NH3 ). Reported herein is a novel Fe-MoS2 catalyst with Fe atomically dispersed onto MoS2 nanosheets, imitating natural nitrogenase, to boost N2 electroreduction into NH3 at room temperature. The Fe-MoS2 nanosheets exhibited a faradic efficiency of 18.8 % with a yield rate of 8.63â µg NH 3 mgcat. -1 h-1 for NH3 at -0.3â V versus the reversible hydrogen electrode. The mechanism study revealed that the electroreduction of N2 was promoted and the competing hydrogen evolution reaction was suppressed by decorating the edge sites of S in MoS2 with the atomically dispersed Fe, resulting in high catalytic performance for the electroreduction of N2 into NH3 . This work provides new ideas for the design of catalysts for N2 electroreduction and strengthens the understanding about N2 activation over Mo-based catalysts.
RESUMEN
Single-atom catalysts exhibit high selectivity in hydrogenation due to their isolated active sites, which ensure uniform adsorption configurations of substrate molecules. Compared with the achievement in catalytic selectivity, there is still a long way to go in exploiting the catalytic activity of single-atom catalysts. Herein, we developed highly active and selective catalysts in selective hydrogenation by embedding Pt single atoms in the surface of Ni nanocrystals (denoted as Pt1/Ni nanocrystals). During the hydrogenation of 3-nitrostyrene, the TOF numbers based on surface Pt atoms of Pt1/Ni nanocrystals reached â¼1800 h-1 under 3 atm of H2 at 40 °C, much higher than that of Pt single atoms supported on active carbon, TiO2, SiO2, and ZSM-5. Mechanistic studies reveal that the remarkable activity of Pt1/Ni nanocrystals derived from sufficient hydrogen supply because of spontaneous dissociation of H2 on both Pt and Ni atoms as well as facile diffusion of H atoms on Pt1/Ni nanocrystals. Moreover, the ensemble composed of the Pt single atom and nearby Ni atoms in Pt1/Ni nanocrystals leads to the adsorption configuration of 3-nitrostyrene favorable for the activation of nitro groups, accounting for the high selectivity for 3-vinylaniline.
RESUMEN
As electron transfer to CO2 is generally considered to be the critical step during the activation of CO2 , it is important to develop approaches to engineer the electronic properties of catalysts to improve their performance in CO2 electrochemical reduction. Herein, we developed an efficient strategy to facilitate CO2 activation by introducing oxygen vacancies into electrocatalysts with electronic-rich surface. ZnO nanosheets rich in oxygen vacancies exhibited a current density of -16.1â mA cm-2 with a Faradaic efficiency of 83 % for CO production. Based on density functional theory (DFT) calculations, the introduction of oxygen vacancies increased the charge density of ZnO around the valence band maximum, resulting in the enhanced activation of CO2 . Mechanistic studies further revealed that the enhancement of CO production by introducing oxygen vacancies into ZnO nanosheets originated from the increased binding strength of CO2 and the eased CO2 activation.
RESUMEN
A molecule or a molecular system always consists of excited states of different spin multiplicities. With conventional optical excitations, only the (bright) states with the same spin multiplicity of the ground state could be directly reached. How to reveal the dynamics of excited (dark) states remains the grand challenge in the topical fields of photochemistry, photophysics, and photobiology. For a singlet-triplet coupled molecular system, the (bright) singlet dynamics can be routinely examined by conventional femtosecond pump-probe spectroscopy. However, owing to the involvement of intrinsically fast decay channels such as intramolecular vibrational redistribution and internal conversion, it is very difficult, if not impossible, to single out the (dark) triplet dynamics. Herein, we develop a novel strategy that uses an ultrafast broadband white-light continuum as a excitation light source to enhance the probability of intersystem crossing, thus facilitating the population flow from the singlet space to the triplet space. With a set of femtosecond time-reversed pump-probe experiments, we report on a proof-of-concept molecular system (i.e., the malachite green molecule) that the pure triplet dynamics can be mapped out in real time through monitoring the modulated emission that occurs solely in the triplet space. Significant differences in excited-state dynamics between the singlet and triplet spaces have been observed. This newly developed approach may provide a useful tool for examining the elusive dark-state dynamics of molecular systems and also for exploring the mechanisms underlying molecular luminescence/photonics and solar light harvesting.
Asunto(s)
Oscuridad , Teoría Cuántica , Modelos Teóricos , Espectrometría de FluorescenciaRESUMEN
The electrochemical synthesis of propylene oxide is far from practical application due to the limited performance (including activity, stability, and selectivity). In this work, we spatially decouple the bromide-mediated process to avoid direct contact between the anode and propylene, where bromine is generated at the anode and then transferred into an independent reactor to react with propylene. This strategy effectively prevents the side reactions and eliminates the interference to stability caused by massive alkene input and vigorously stirred electrolytes. As expected, the selectivity for propylene oxide reaches above 99.9% with a remarkable Faradaic efficiency of 91% and stability of 750-h (>30 days). When the electrode area is scaled up to 25 cm2, 262 g of pure propylene oxide is obtained after 50-h continuous electrolysis at 6.25 A. These findings demonstrate that the electrochemical bromohydrin route represents a viable alternative for the manufacture of epoxides.