Role of Adipose-Derived Mesenchymal Stem Cells in Bone Regeneration.

Bone regeneration involves multiple factors such as tissue interactions, an inflammatory response, and vessel formation. In the event of diseases, old age, lifestyle, or trauma, bone regeneration can be impaired which could result in a prolonged healing duration or requiring an external intervention for repair. Currently, bone grafts hold the golden standard for bone regeneration. However, several limitations hinder its clinical applications, e.g., donor site morbidity, an insufficient tissue volume, and uncertain post-operative outcomes. Bone tissue engineering, involving stem cells seeded onto scaffolds, has thus been a promising treatment alternative for bone regeneration. Adipose-derived mesenchymal stem cells (AD-MSCs) are known to hold therapeutic value for the treatment of various clinical conditions and have displayed feasibility and significant effectiveness due to their ease of isolation, non-invasive, abundance in quantity, and osteogenic capacity. Notably, in vitro studies showed AD-MSCs holding a high proliferation capacity, multi-differentiation potential through the release of a variety of factors, and extracellular vesicles, allowing them to repair damaged tissues. In vivo and clinical studies showed AD-MSCs favoring better vascularization and the integration of the scaffolds, while the presence of scaffolds has enhanced the osteogenesis potential of AD-MSCs, thus yielding optimal bone formation outcomes. Effective bone regeneration requires the interplay of both AD-MSCs and scaffolds (material, pore size) to improve the osteogenic and vasculogenic capacity. This review presents the advances and applications of AD-MSCs for bone regeneration and bone tissue engineering, focusing on the in vitro, in vivo, and clinical studies involving AD-MSCs for bone tissue engineering.

Efficacy of commercial mouth-rinses on SARS-CoV-2 viral load in saliva: randomized control trial in Singapore.

PURPOSE: One of the key approaches to minimize the risk of COVID-19 transmission would be to reduce the titres of SARS-CoV-2 in the saliva of infected COVID-19 patients. This is particularly important in high-risk procedures like dental treatment. The present randomized control trial evaluated the efficacy of three commercial mouth-rinse viz. povidone-iodine (PI), chlorhexidine gluconate (CHX) and cetylpyridinium chloride (CPC), in reducing the salivary SARS-CoV-2 viral load in COVID-19 patients compared with water. METHODS: A total of 36 SARS-CoV-2-positive patients were recruited, of which 16 patients were randomly assigned to four groups-PI group (n = 4), CHX group (n = 6), CPC group (n = 4) and water as control group (n = 2). Saliva samples were collected from all patients at baseline and at 5 min, 3 h and 6 h post-application of mouth-rinses/water. The samples were subjected to SARS-CoV-2 RT-PCR analysis. RESULTS: Comparison of salivary Ct values of patients within each group of PI, CHX, CPC and water at 5 min, 3 h and 6 h time points did not show any significant differences. However, when the Ct value fold change of each of the mouth-rinse group patients were compared with the fold change of water group patients at the respective time points, a significant increase was observed in the CPC group patients at 5 min and 6 h and in the PI group patients at 6 h. CONCLUSION: The effect of decreasing salivary load with CPC and PI mouth-rinsing was observed to be sustained at 6 h time point. Within the limitation of the current study, as number of the samples analyzed, the use of CPC and PI formulated that commercial mouth-rinses may be useful as a pre-procedural rinse to help reduce the transmission of COVID-19. ISRCTN (ISRCTN95933274), 09/09/20, retrospectively registered.

In Vivo Efficacy of Neutrophil-Mediated Bone Regeneration Using a Rabbit Calvarial Defect Model.

Reconstruction of bone due to surgical removal or disease-related bony defects is a clinical challenge. It is known that the immune system exerts positive immunomodulatory effects on tissue repair and regeneration. In this study, we evaluated the in vivo efficacy of autologous neutrophils on bone regeneration using a rabbit calvarial defect model. Methods: Twelve rabbits, each with two surgically created calvarial bone defects (10 mm diameter), were randomly divided into two groups; (i) single application of neutrophils (SA-NP) vs. SA-NP control, and (ii) repetitive application of neutrophils (RA-NP) vs. RA-NP control. The animals were euthanized at 4 and 8 weeks post-operatively and the treatment outcomes were evaluated by micro-computed tomography, histology, and histomorphometric analyses. Results: The micro-CT analysis showed a significantly higher bone volume fraction (bone volume/total volume) in the neutrophil-treated groups, i.e., median interquartile range (IQR) SA-NP (18) and RA-NP (24), compared with the untreated controls, i.e., SA-NP (7) and RA-NP (14) at 4 weeks (p < 0.05). Similarly, new bone area fraction (bone area/total area) was significantly higher in neutrophil-treated groups at 4 weeks (p < 0.05). Both SA-NP and RA-NP had a considerably higher bone volume and bone area at 8 weeks, although the difference was not statistically significant. In addition, immunohistochemical analysis at 8 weeks revealed a higher expression of osteocalcin in both SA-NP and RA-NP groups. Conclusions: The present study provides first hand evidence that autologous neutrophils may have a positive effect on promoting new bone formation. Future studies should be performed with a larger sample size in non-human primate models. If proven feasible, this new promising strategy could bring clinical benefits for bone defects to the field of oral and maxillofacial surgery.

Postnatal periodontal ligament as a novel adult stem cell source for regenerative corneal cell therapy.

Corneal opacities are a leading cause of global blindness. They are conventionally treated by the transplantation of donor corneal tissue, which is, restricted by a worldwide donor material shortage and allograft rejection. Autologous adult stem cells with a potential to differentiate into corneal stromal keratocytes (CSKs) could offer a suitable choice of cells for regenerative cell therapy. Postnatal periodontal ligament (PDL) contains a population of adult stem cells, which has a similar embryological origin as CSK, that is cranial neural crest. We harvested PDL cells from young adult teeth extracted because of non-functional or orthodontic reason and differentiated them towards CSK phenotype using a two-step protocol with spheroid formation followed by growth factor and cytokine induction in a stromal environment (human amnion stroma and porcine corneal stroma). Our results showed that the PDL-differentiated CSK-like cells expressed CSK markers (CD34, ALDH3A1, keratocan, lumican, CHST6, B3GNT7 and Col8A2) and had minimal expression of genes related to fibrosis and other lineages (vasculogenesis, adipogenesis, myogenesis, epitheliogenesis, neurogenesis and hematogenesis). Introduction of PDL spheroids into the stroma of porcine corneas resulted in extensive migration of cells inside the host stroma after 14-day organ culture. Their quiescent nature and uniform cell distribution resembled to that of mature CSKs inside the native stroma. Our results demonstrated the potential translation of PDL cells for regenerative corneal cell therapy for corneal opacities.

Dental stem cells: a future asset of ocular cell therapy.

Regenerative medicine using patient's own stem cells (SCs) to repair dysfunctional tissues is an attractive approach to complement surgical and pharmacological treatments for aging and degenerative disorders. Recently, dental SCs have drawn much attention owing to their accessibility, plasticity and applicability for regenerative use not only for dental, but also other body tissues. In ophthalmology, there has been increasing interest to differentiate dental pulp SC and periodontal ligament SC (PDLSC) towards ocular lineage. Both can commit to retinal fate expressing eye field transcription factors and generate rhodopsin-positive photoreceptor-like cells. This proposes a novel therapeutic alternative for retinal degeneration diseases. Moreover, as PDLSC shares similar cranial neural crest origin and proteoglycan secretion with corneal stromal keratoctyes and corneal endothelial cells, this offers the possibility of differentiating PDLSC to these corneal cell types. The advance could lead to a shift in the medical management of corneal opacities and endothelial disorders from highly invasive corneal transplantation using limited donor tissue to cell therapy utilizing autologous cells. This article provides an overview of dental SC research and the perspective of utilizing dental SCs for ocular regenerative medicine.

Novel 3D polycaprolactone scaffold for ridge preservation--a pilot randomised controlled clinical trial.

OBJECTIVES: This pilot randomised controlled clinical trial aimed to evaluate the feasibility and effectiveness of using a polycaprolactone (PCL) scaffold in fresh extraction sockets for ridge preservation. The hypothesis was that the insertion of a 3D bioresorbable PCL scaffold in fresh extraction sockets allowed for normal bone healing and better maintenance of ridge dimensions after 6 months as compared to extraction sockets without the scaffold. MATERIAL AND METHODS: Thirteen patients were randomised to either the test group (N = 6) where a PCL scaffold was inserted in the tooth socket after extraction or the control group (N = 7) where no space filler was used. Alveolar ridge height and width measurements were made at baseline and 6 months post-extraction, for the evaluation of bone resorption. At 6 months, a core of bone was trephined out from the healed ridge for microcomputed tomographic (micro CT) and histological analyses, immediately before Stage I dental implant surgery. Stage II dental implant surgery was performed 4-6 months later. RESULTS: There was less vertical ridge resorption in the test group compared to the control group, and the difference was statistically significant in the mesio-buccal aspect (P = 0.008). Micro CT and histological observations showed mainly mineralised bone formation in both groups, except for one specimen in the test group. CONCLUSIONS: The insertion of a 3D bioresorbable PCL scaffold in fresh extraction sockets allowed for normal bone healing, and there was better maintenance of ridge height after 6 months as compared to extraction sockets without the scaffold.

Nacre-like ceramic composites: Properties, functions and fabrication in the context of dental restorations.

Dental restorations are in increasing demand, yet their success rate strongly decreases after 5-10 years post-implantation, attributed in part to mismatching properties with the surrounding buccal environment that causes failures and wear. Among current research to address this issue, biomimetic approaches are promising. Nacre-like ceramic composites are particularly interesting because they combine multiple antagonistic properties making them more resistant to failure in harsh environment than other materials. With the rapid progress in 3D printing producing nacre-like structures has open up new opportunities not yet realised. In this paper, nacre-like composites of various compositions are reviewed in the context of hypothetical biomimetic dental restorations. Their structural, functional and biological properties are compared with those of dentin, enamel, and bone to determine which composition would be the most suitable for each of the 3 mineralized regions found in teeth. The role of complex microstructures and mineral orientations are discussed as well as 3D printing methods that allow the design and fabrication of such complex architectures. Finally, usage of these processes and anticipated prospects for next generation biomimetic dental replacements are discussed to suggest future research directions in this area. STATEMENT OF SIGNIFICANCE: With the current ageing population, dental health is a major issue and current dental restorations still have shortcomings. For the next generation of dental restorations, more biomimetic approaches would be desirable to increase their durability. Among current materials, nacre-like ceramic composites are interesting because they can approach the various structural properties found in the different parts of our teeth. Furthermore, it is also possible to embed self-sensing functionalities to enable monitoring of oral health. Finally, new recent 3D printing technologies now permit the fabrication of complex shapes with local compositions and local microstructures. With this current status of the research, we anticipate new dental restorations designs and highlight the remaining gaps and issues to address.

Findings from the 2019 nationally representative oral health survey for adults in Singapore.

OBJECTIVES: The aim of this study was to present key findings from the 2019 national adult oral health survey in Singapore (NAOHS). METHODS: A multi-stage stratified sampling method was used to recruit participants for a representative national adult oral health survey. A total of 12 212 households were randomly selected from the National Database on Dwellings in Singapore. Within each household eligible persons aged ≥65 years were automatically invited to participate while a Kish selection method was used to invite those between 21 and 64 years old. The survey comprised a face-to-face interview questionnaire and a clinical examination which recorded details of tooth loss, DMFT, DMFS and prevalence of periodontal disease according to the CPITN and the US CDC-AAP classifications. Weighted analysis was performed to adjust for oversampling, non-response and post-stratification. Multivariate regression with backward stepwise selection was carried out to identify predictors of chronic periodontal disease and untreated dental caries. RESULTS: Six hundred and sixty-three participants completed both the questionnaires and the clinical examination. The prevalence of edentulousness was 2.7%. Of participants, 34.8% presented with untreated dental caries with a higher proportion found in those who were aged ≥60 years, of Malay ethnicity, living in 1-2-room public housing and who only visited the dentist when there was a problem. Mean DMFS and DMFT indices were 24.7 and 7.9 respectively. Based on the CDC-AAP classification, the prevalence of moderate-severe chronic periodontitis was 56.9% and increased with age, with a higher proportion in males. Participants with untreated dental caries were more likely to have moderate or severe periodontal disease. CONCLUSIONS: Survey findings showed high prevalence of dental caries and periodontal disease, at 34.8% and 77.6% respectively. A clear socio-economic gradient in the distribution of tooth loss, untreated dental caries and moderate-to-severe periodontitis was observed.

Oral health knowledge, attitudes and behaviours of adults: Findings from a National Oral Health Survey in Singapore.

OBJECTIVES: Prevention complements the curative management of oral diseases. Effective preventive interventions involve the adoption of oral health promoting behaviours. Little is known about the awareness of oral disease and its prevention among Singaporean adults as well as their prevailing oral health attitudes and behaviours. The aim of the study was to describe the oral health knowledge, attitudes and behaviours of adults in Singapore. METHODS: A random sample of adults (≥21 years old) in Singapore was selected to complete an interviewer-administered questionnaire. The questionnaire gathered information about their knowledge of the aetiology, signs and symptoms as well as prevention of dental caries and periodontal disease; attitudes about the value of teeth, locus of control in maintaining oral health and oral health behaviours including toothbrushing, flossing and dental attendance. RESULTS: A total of 1196 adults of weighted mean age 48 years old with almost equal proportions of males and females responded to the questionnaire. Participants were more unaware about the causes of periodontal disease (25.7%) than dental caries (4%). While more than 90% of participants felt that healthy teeth were important and could affect their overall health, many (67.0%) felt it was natural to lose their teeth with old age. Among the participants, 83.5% brushed their teeth twice a day; 41.9% flossed their teeth and 53.9% visited the dentist at least once a year. CONCLUSIONS: The study findings showed good knowledge around dental caries but some gaps around periodontal disease. It also found that participants perceived having limited control over preventing tooth loss. Irregular dental attendance and poor denture wearing habits were also noted. The findings shed light on key areas to focus on through oral health promotion to improve overall oral health.

Alveolar Ridge Augmentation with a Novel Combination of 3D-Printed Scaffolds and Adipose-Derived Mesenchymal Stem Cells-A Pilot Study in Pigs.

Alveolar ridge augmentation is an important dental procedure to increase the volume of bone tissue in the alveolar ridge before the installation of a dental implant. To meet the high demand for bone grafts for alveolar ridge augmentation and to overcome the limitations of autogenous bone, allografts, and xenografts, researchers are developing bone grafts from synthetic materials using novel fabrication techniques such as 3D printing. To improve the clinical performance of synthetic bone grafts, stem cells with osteogenic differentiation capability can be loaded into the grafts. In this pilot study, we propose a novel bone graft which combines a 3D-printed polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold with adipose-derived mesenchymal stem cells (AD-MSCs) that can be harvested, processed and implanted within the alveolar ridge augmentation surgery. We evaluated the novel bone graft in a porcine lateral alveolar defect model. Radiographic analysis revealed that the addition of AD-MSCs to the PCL-TCP scaffold improved the bone volume in the defect from 18.6% to 28.7% after 3 months of healing. Histological analysis showed the presence of AD-MSCs in the PCL-TCP scaffold led to better formation of new bone and less likelihood of fibrous encapsulation of the scaffold. Our pilot study demonstrated that the loading of AD-MSCs improved the bone regeneration capability of PCL-TCP scaffolds, and our novel bone graft is suitable for alveolar ridge augmentation.

A Porcine Model Using Adipose Stem Cell-Loaded Scaffolds for Alveolar Ridge Augmentation.

Tooth loss greatly affects a person's quality of life and many turn to dental implants to replace lost teeth. The success of a dental implant depends on the amount of alveolar bone supporting the implant, and thus, bone augmentation is often necessary to preserve or build up bone volume in the alveolar ridge. Bone can be augmented with autogenous bone, allografts, or xenografts, but the limitations of such natural bone grafts prompt researchers to develop synthetic scaffolds supplemented with cells and/or bioactive agents as alternative bone grafts. The translation of these combination scaffolds from the laboratory to the clinic requires reliable experimental models that can simulate the clinical conditions in human patients. In this article, we describe the use of a porcine alveolar defect model as a platform to evaluate the efficacy of a novel combination of a three-dimensional-printed polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold and adipose-derived mesenchymal stem cells (AD-MSCs) in lateral alveolar augmentation. The surgical protocol for the defect creation and regenerative surgery, as well as analytical methods to determine the extent of tissue regeneration, are described and discussed.

Preliminary Investigation on the Geometric Accuracy of 3D Printed Dental Implant Using a Monkey Maxilla Incisor Model.

Additive manufacturing has proven to be a viable alternative to conventional manufacturing methodologies for metallic implants due to its capability to customize and fabricate novel and complex geometries. Specific to its use in dental applications, various groups have reported successful outcomes for customized root-analog dental implants in preclinical and clinical studies. However, geometrical accuracy of the fabricated samples has never been analyzed. In this article, we studied the geometric accuracy of a 3D printed titanium dental implant design against the tooth root of the monkey maxilla incisor. Monkey maxillas were scanned using cone-beam computed tomography, then segmentation of the incisor tooth roots was performed before the fabrication of titanium dental implants using a laser powder bed fusion (PBF) process. Our results showed 68.70% ± 5.63 accuracy of the 3D printed dental implant compared to the actual tooth (n = 8), where main regions of inaccuracies were found at the tooth apex. The laser PBF fabrication process of the dental implants showed a relatively high level of accuracy of 90.59% ± 4.75 accuracy (n = 8). Our eventual goal is to develop an accurate workflow methodology to support the fabrication of patient-specific 3D-printed titanium dental implants that mimic patients' tooth anatomy and fit precisely within the socket upon tooth extraction. This is essential for promoting primary stability and osseointegration of dental implants in the longer term.

Mandibular asymmetry: Is there a difference in the bone and soft tissue thickness between both sides?

OBJECTIVE: The asymmetric mandible presents the clinician with unique anatomic challenges in orthognathic surgery correction. This study aims to investigate these characteristics of the asymmetric mandible: mandible bone thickness, soft tissue thickness, and the proximity of the bone cortex to the inferior alveolar nerve (IAN) canal. STUDY DESIGN: Three-dimensional virtual models were created of 35 participants of Asian descent with mandibular asymmetry. Mandibular bone thicknesses and soft tissue thicknesses were measured at certain landmarks. Statistical analysis of the thicknesses of both sides of the mandible was performed. Comparison of thicknesses between patients with minor and major asymmetry were also performed. RESULTS: The bone was significantly thinner at the longer side at all 4 mandible landmarks (P < .001). The bone lateral to the IAN was significantly thinner at the longer side, as well (P < .001). The soft tissue thickness did not differ significantly across sides, except at 1 landmark. These findings were even more exaggerated in the major asymmetry group. CONCLUSIONS: The longer side of the asymmetric mandible bone was thinner, and the bone lateral to the IAN was also thinner as a result. This asymmetric thinness was exaggerated in patients with severe asymmetry, which may predispose the longer side to IAN injury and unfavorable fractures. The differences in bone thickness in the asymmetric mandible may also result in residual postoperative asymmetry.

Replacement of the condyle and ascending ramus by a modular endoprosthesis in Macaca fascicularis--part 4: evaluation of the temporomandibular joints.

PURPOSE: To assess, using cone-beam computed tomography and histologic examination, whether the fixation of a condyle-ascending ramus mandibular modular endoprosthesis results in a physiologic condylar replacement in Macaca fascicularis. MATERIALS AND METHODS: The right condyle and ascending ramus were resected in 8 adult monkeys and replaced with a modular endoprosthesis, fixed with polymethyl methacrylate bone cement (Palacos). Four monkeys were sacrificed at 3 months and another 4 at 6 months postoperatively. The reconstructed and contralateral temporomandibular joints were harvested en bloc and studied using cone-beam computed tomography and descriptive histologic examination. Heterotopic bone formation was quantified using a modified grading scale. The condyle cartilage thickness in the contralateral temporomandibular joint was measured using histomorphometric methods. The results were compared with those of the unoperated control monkeys. RESULTS: Bone resorption in the glenoid fossa and pathologic changes in the articular disc were noted on the reconstructed side in most specimens. Nevertheless, cone-beam computed tomography findings, histologic findings, and condyle cartilage thickness measurements of the contralateral temporomandibular joint were not significantly different from those of the control specimens. CONCLUSION: Replacement of the condyle and ascending ramus using a modular endoprosthesis in Macaca fascicularis resulted in adaptive remodeling of the glenoid fossa at up to 6 months postoperatively. Long-term studies are required to further assess the potential of this mode of reconstruction.

Replacement of the condyle and ascending ramus by a modular endoprosthesis in Macaca fascicularis--part 3: evaluation of peri-implant bone remodeling.

PURPOSE: To assess whether the fixation of a condyle-ascending ramus mandibular modular endoprosthesis, using bone cement, will result in stress-related bone resorption in the Macaca fascicularis. MATERIALS AND METHODS: The right condyle and ascending ramus were resected in 8 adult monkeys and replaced by a modular endoprosthesis, fixed with polymethylmethacrylate bone cement (Palacos). Four monkeys were sacrificed at 3 months and another 4 at 6 months postoperatively. The bone mineral density was assessed using dual-energy x-ray absorptiometry in the region anterior to the stem and using micro-computed tomography in the buccal, lingual, and inferior regions adjacent to the stem. RESULTS: The bone mineral density of the 3-month specimens was greater than that at 6 months in the buccal, lingual, and inferior regions adjacent to the stem. However, the difference was statistically significant only in the inferior aspect. No significant difference was found in the bone mineral density in the region anterior to the stem between the 3- and 6-month specimens. CONCLUSION: A minimal reduction in bone density around the stem of the endoprosthesis was observed between 3 and 6 months after placement. This reduction did not result in any adverse clinical events.

The Role of Dentists in COVID-19 Is Beyond Dentistry: Voluntary Medical Engagements and Future Preparedness.

The emergence of the highly infectious novel coronavirus SARS-CoV-2 has led to a global COVID-19 pandemic. Since the outbreak of COVID-19, worldwide healthcare systems have been severely challenged. The rapid and explosive surge of positive cases has significantly increased the demand for medical care. Herein we provide a perspective on the role dentists can play in voluntary medical assistance and future preparedness for a similar pandemic. Though dentists and physicians have different scopes of practice, their trainings share many similarities. Hence, dental professionals, with their knowledge of basic human science and sterile surgical techniques, are an invaluable resource in the COVID-19 pandemic response. Overall, it is commendable that many dentists have risen to the challenge in the fight against COVID-19. For example, in Singapore, National Dental Centre Singapore (NDCS) deployed dental clinicians as well as volunteers from research laboratories to screen for suspected cases, provide consultations as well as conduct swabbing operations. Dental practice will be considerably changed in the post-COVID-19 era. There is a greater need to have refresher courses for practicing dentists on new infection control strategies. Moreover, the curriculum in dental schools should be expanded to include competencies in pandemic and disaster relief. In addition, voluntary medical work should be made a part of the community dentistry curriculum. This volunteerism will leave a positive impact on developing the careers of young dentists. Hence, the contribution of dentists beyond dental practice in this pandemic situation will be appreciated by future generations.

Replacement of the condyle and ascending ramus by a modular endoprosthesis in Macaca fascicularis--part 1: a clinical and radiographic study.

PURPOSE: To evaluate the feasibility of replacing the condyle and ascending ramus with a novel modular endoprosthesis in Macaca fascicularis. MATERIALS AND METHODS: Eight male adult monkeys (Macaca fascicularis) were used in this study. The right condyle and ascending ramus posterior to the lower second molar were resected. An endoprosthesis consisting of 2 modules was inserted to replace the resected segment and fixed in place using polymethylmethacrylate bone cement (Palacos). Four monkeys were sacrificed at 3 months and another 4 at 6 months postoperatively. The operated side of the mandible was then harvested, including the endoprosthesis and the stump of the mandible to which it was attached. Lateral mandibular radiographs were taken using standard settings immediately postoperatively and postsacrifice. RESULTS: Two monkeys presented with a fistula at the operated area 1 month postoperatively, but this resolved with a short course of antimicrobial treatment. At the time of sacrifice, no fistulas, dehiscences, or mobility of the endoprostheses was observed. There was no significant change in maximum mouth opening. At 3 months, a linear radiolucency was noted at the cement-bone interface in the 2 monkeys that previously presented with fistulas; whereas at 6 months, none of the 4 animals showed any radiolucency. CONCLUSIONS: The use of a cemented modular endoprosthesis for replacement of the condyle and ramus unit was feasible with minimal complications allowing normal mouth opening and occlusion. Further histologic and microfocus computed tomographic studies will be done to confirm the findings.

Replacement of the condyle and ascending ramus by a modular endoprosthesis in Macaca fascicularis-part 2: microcomputed tomographic and histologic evaluation of the ramus and stem.

PURPOSE: The present study presents the microcomputed tomographic and histologic evaluation of the peri-implant tissues of a modular endoprosthesis used to replace the condyle and ascending ramus in Macaca fascicularis. MATERIALS AND METHODS: The right condyle and ascending ramus were resected in 8 adult monkeys and replaced by a modular endoprosthesis, fixed with polymethylmethacrylate bone cement (Palacos). Four monkeys were sacrificed at 3 months and 4 at 6 months postoperatively. Microcomputed tomographic scanning was performed to analyze the bone volume at the bone-cement interface. Histologic and histomorphometric assessments were done using a modified hard and soft tissue grading scale and by studying the total bone contact at the interface. RESULTS: The combined (buccal, lingual, and inferior) mean bone volume percentage of the 6-month group was significantly greater than that of the 3-month group (P < .05). The 6-month specimens showed a reduced inflammatory response and more abundant bone formation around the stem. The total soft tissue histologic score was significantly greater in the 6-month group (P < .05). A total bone contact percentage of 15.4% to 85.2% was achieved in 3 specimens. CONCLUSIONS: Satisfactory bone growth was found at the bone-cement interface at the stem region, although direct bone contact with the cement was not achieved in all cases. Soft tissue contact with the prosthetic ramus, in the form of a fibrous capsule, was present in some areas. At 6 months, minimal interfacial inflammation was found in this monkey model.

Three-Dimensional Printed Polycaprolactone Scaffolds for Bone Regeneration Success and Future Perspective.

IMPACT STATEMENT: Cells need a home to proliferate and remodel; biomimicry of the microarchitecture and microenvironment is important, and with 10 years of history in more than 20,000 clinical applications of 3D printed medical grade polycaprolactone scaffolds, we present the lessons learnt and project the future.

Evaluation of decellularized tilapia skin as a tissue engineering scaffold.

Decellularized bovine and porcine tissues have been used as scaffolds to support tissue regeneration but inherit religious restrictions and risks of disease transmission to humans. Decellularized marine tissues are seen as attractive alternatives due to their similarity to mammalian tissues, reduced biological risks, and less religious restrictions. The aim of this study was to derive an acellular scaffold from the skin of tilapia and evaluate its suitability as a tissue engineering scaffold. Tilapia skin was treated with a series of chemical and enzymatic treatments to remove cellular materials. The decellularized tilapia skin (DTS) was then characterized and evaluated in vitro and in vivo to assess its biological compatibility. The results indicated that the decellularization process removed 99.6% of the DNA content from tilapia skin. The resultant DTS was shown to possess a high denaturation temperature of 68.1 ± 1.0°C and a high Young's modulus of 56.2 ± 14.4 MPa. The properties of DTS were also compared against those of crosslinked electrospun tilapia collagen membrane, another form of tilapia-derived collagen scaffold. In vitro studies revealed that both DTS and crosslinked electrospun tilapia collagen promoted cellular metabolic activity, differentiation, and mineralization of murine preosteogenic MC3T3-E1 cells. The rat calvarial defect model was used to evaluate the in vivo performance of the scaffolds, and both scaffolds did not induce hyperacute rejections. Furthermore, they enhanced bone regeneration in the critical defect compared with the sham control. This study suggests that tilapia-derived scaffolds have great potential in tissue engineering applications.