Enhanced Visible Light Photocatalytic Performance of G-C3N4 Photocatalysts Co-Doped with Gold and Sulfur for Degradation of Persistent Pollutant (Rhodamine B).

In order to overcome the intrinsic drawback of pristine g-C3N4, a nano-composite photo-catalyst Au/S-C3N4 with controllable nanoscale gold (Au) particles was successfully synthesized by a facile liquid chemical preparation process. It was found that the content of chloroauric acid (AuCl3 · HCl · 4H2O) play crucial role in both the diameter and the density of the Au nanoparticles. The results showed that as-prepared Au/S-C3N4 nanosheets with 2 wt% Au loaded content exhibited excellent photocatalytic decomposition of RhB under visible light irradiation as compared with other Au loadings (i.e., 1 wt%, 2 wt%, 3 wt%, 4 wt% and 6 wt%). The photocatalytic activity of Au/S-C3N4 with 2 wt% Au loading was twice higher than that of bare S-C3N4 (0.00955 min-1). The enhanced performance could be attributed to the synergic effect of gold and sulfur on g-C3N4. A possible mechanism for elucidating the better performance of Au/S-C3N4 is also proposed and discussed in detail in this work.

Effects of Oxidizing Media on the Composition, Morphology and Optical Properties of Colloidal Zirconium Oxide Nanoparticles Synthesized via Pulsed Laser Ablation in Liquid Technique.

In this work, pulsed laser ablation in liquid (PLAL) technique was applied to synthesize colloidal nanoparticles of zirconium oxide (ZrO2) in three different aqueous media (de-ionized water, ethanol and acetone). The structure, morphology, composition and optical properties of the synthesized nanoparticles were characterized by XRD, SEM, TEM, XPS, UV-Vis spectrophotometer and FT-IR analysis respectively. The structural analysis by XRD reveals the formation of mixture of monoclinic and tetragonal phases of nanocrystalline zirconia. The average crystallite sizes of ZrO2 by using Scherrer's formula were estimated to be 41.8, 42.6 and 40.3 nm in water, ethanol and acetone respectively for monoclinic phase while 20.1, 24.8 and 18.9 nm were for tetragonal phase of ZrO2 in water, ethanol and acetone respectively. Microstructure of our starting materials was confirmed from SEM analysis and morphology of the synthesized nanostructured ZrO2 was studied by TEM. TEM images show that the average particle size is less than 10 nm with spherical shapes. The XPS analysis reveals the elemental compositions of ZrO2 nanoparticles and their stoichiometric ratios. Optical properties of the synthesized ZrO2 nanoparticles were studied by UV-Vis absorption spectroscopy and Fourier transform infrared spectroscopy (FT-IR). Uv-Vis absorption spectroscopy revealed that the nanoparticle produced in water has higher absorption due to higher NPs concentrations suspended in water. The band gap of the synthesized ZrO2 nanoparticles in water, ethanol and acetone were estimated from Tauc's plot to be 5.19, 5.22 and 4.94 eV respectively. FT-IR analysis also ascertained the functional groups of ZrO2 nanoparticles in the three liquid media.

Comparative Study of Pure g-C3N4 and Sulfur-Doped g-C3N4 Catalyst Performance in Photo-Degradation of Persistent Pollutant Under Visible Light.

Graphitic carbon nitride (g-C3N4) and sulfur-doped g-C3N4 were prepared by pyrolysis of melamine and thiourea respectively. Their comparative performance was investigated for photo-degradation of a Rhodamine B (RhB) an organic toxic pollutant. The crystal structure, morphology, microscopic components and properties of the synthesized samples were characterized by XRD, TEM, FT-IR, photoluminescence (PL) emission spectroscopy and zeta potential. TG-DTA is a record of the process for pyrolysis of thiourea. Two simplified kinetic models, pseudo-first-order and pseudo-second-order were applied to predict the adsorption rate constants. Thermodynamic parameters, such as the change in free energy, enthalpy and entropy were also calculated to analyze the process of adsorption. Adsorption isotherms and equilibrium adsorption capacities were established by three well-known isotherm models including Langmuir, Freundlich and Dubinin-Radushkevich (D-R). Both samples were investigated for underlining the reaction mechanism during the photodegradation RhB process and then can be assigned to the overall reaction. The photosensitive hole is regarded as main oxidation species for the degradation by sulfur-doped g-C3N4, but not the exclusive way for g-C3N4. It is worth mentioning that the optimum operating condition can be obtained by orthogonal experiments.

Optimized laser-induced breakdown spectroscopy for determination of xenobiotic silver in monosodium glutamate and its verification using ICP-AES.

Laser-induced breakdown spectroscopy (LIBS) was applied as a potential tool for the determination of xenobiotic metal in monosodium glutamate (MSG). In order to achieve a high-sensitivity LIBS system required to determine trace amounts of metallic silver in MSG and to attain the best detection limit, the parameters used in our experiment (impact of focusing laser energy on the intensity of LIBS emission signals, the influence of focusing lens distance on the intensity of LIBS signals, and time responses of the plasma emissions) were optimized. The spectra of MSG were obtained in air using a suitable detector with an optical resolution of 0.06 nm, covering a spectral region from 220 to 720 nm. Along with the detection of xenobiotic silver, other elements such as Ca, Mg, S, and Na were also detected in MSG. To determine the concentration of xenobiotic silver in MSG, the calibration curve was plotted by preparing standard samples having different silver abundances in an MSG matrix. The LIBS results of each sample were cross-verified by analyzing with a standard analytical technique such as inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Both (LIBS and ICP-AES) results were in mutual agreement. The limit of detection of the LIBS setup was found to be 0.57 ppm for silver present in MSG samples.

Enhanced photo-catalytic activity of ordered mesoporous indium oxide nanocrystals in the conversion of CO2 into methanol.

Ordered mesoporous indium oxide nanocrystal (m-In2O3) was synthesized by nanocasting technique, in which highly ordered mesoporous silca (SBA-15) was used as structural matrix. X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halanda (BJH) studies were carried out on m-In2O3 and the results revealed that this material has a highly ordered mesoporous surface with reduced grain size, increased surface area and surface volume compared to the non porous indium oxide. The diffuse reluctance spectrum exhibited substantially improved light absorption efficiency in m-In2O3 compared to normal indium oxide, however, no considerable change in the band gap energies of these materials was observed. When m-In2O3 was used as a photo-catalyst in the photo-catalytic process of converting carbon dioxide (CO2) into methanol under the pulsed laser radiation of 266-nm wavelengths, an enhanced photo-catalytic activity with the quantum efficiency of 4.5% and conversion efficiency of 46.3% were observed. It was found that the methanol production yield in this chemical process is as high as 485 µlg-1 h-1 after 150 min of irradiation, which is substantially higher than the yields reported in the literature. It is quite clear from the results that the introduction of mesoporosity in indium oxide, and the consequent enhancement of positive attributes required for a photo-catalyst, transformed photo-catalytically weak indium oxide into an effective photo-catalyst for the conversion of CO2 into methanol.

Detection of carcinogenic chromium in synthetic hair dyes using laser induced breakdown spectroscopy.

A laser induced breakdown spectroscopic (LIBS) system, consisting of a pulsed 266 nm laser radiation, in conjunction with a high-resolution spectrograph, a gated intensified charge coupled device camera, and a built-in delay generator were used to develop a sensitive detector to quantify the concentration of toxic substances such as chromium in synthetic hair dyes available on the local market. The strong atomic transition line of chromium (Cr I) at 427.5 nm wavelength was used as a fingerprint wavelength to calibrate the detection system and also to quantify the levels of chromium in the hair dye samples. The limit of detection achieved by our LIBS detection system for chromium was 1.2 ppm, which enabled us to detect chromium concentration in the range of 5-11 ppm in the commercial hair dyes available on the local market. The concentrations of chromium in the hair dyes measured using our system were validated using a standard analytical technique such as inductively coupled plasma mass spectrometry (ICPMS), and acceptable agreement (nearly 8%) was found between the results obtained by the two methods (LIBS and ICPMS). This study is highly significant for human health, specifically for people using synthetic hair dyes for changing the color of their hair.

Synthesis, characterization and photocatalytic activity of Al2O3-TiO2 based composites.

The synthesis, characterization and photocatalytic performance of non-traditional Al2O3-TiO2-based photocatalysts is reported. Al2O3-TiO2 support was loaded with various fractions of CuO and ZrO2. A sound agreement was observed between the bandgaps of synthesized powders measured by UV-Visible diffuse reflectance spectroscopy (DRS) in the solid phase and UV-Visible spectroscopy in the aqueous medium. X-ray diffraction (XRD) analysis revealed the composite nature of the catalysts with the retention of individual identity of each component. The average crystallite size of the individual component was found to be in the range of 20 to 40 nm. Scanning electron microscopy (SEM) analysis authenticated the presence of CuO and ZrO2 at the surface of Al2O3-TiO2 support, while Rutherford Back Scattering Spectroscopy (RBS) confirmed the quantity of the modifiers as per theoretical calculations. The composites showed an enhanced photocatalytic activity in sunlight compared to Al2O3-TiO2 for the degradation of dyes. Efforts were made to elucidate the enhanced sunlight response of the synthesized composite catalysts compared to Al2O3-TiO2. As monitored by ion chromatography (IC), the synthesized photocatalysts completely mineralized the dyes leaving behind inorganic ions in solution. The kinetics of photocatalytic degradation of dyes was evaluated for optimum correlation with the existing models. The stability of the photocatalysts against the photo-corrosion was monitored by analyzing the samples for respective metals in solution after sunlight exposure. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of Environmental Science and Health, Part A, to view the supplemental file.

Synthesis of Cu/Cu2O nanoparticles by laser ablation in deionized water and their annealing transformation into CuO nanoparticles.

Nano-structured Cupric Oxide (CuO) has been synthesized using pulsed laser ablation of pure copper in water using Q-switched pulsed laser beam of 532 nm wavelength and, 5 nanosecond pulse duration and laser pulse energy of 100 mJ/pulse. In the initial unannealed colloidal suspension, the nanoparticles of Copper (Cu) and Cuprious oxide (Cu2O) were identified. Further the suspension was dried and annealed at different temperatures and we noticed the product (Cu/Cu2O) was converted predominantly into CuO at annealing temperature of 300 degrees C for 3 hours. As the annealing temperature was raised from 300 to 900 degrees C, the grain sizes of CuO reduced to the range of 9 to 26 nm. The structure and the morphology of the prepared samples were investigated using X-ray diffraction and Transmission Electron Microscope. Photoluminescence and UV absorption spectrometry studies revealed that the band gap and other optical properties of nano-structured CuO were changed due to post annealing. Fourier transform spectrometry also confirmed the transformation of Cu/Cu2O into CuO.

Removal of sulfur compounds from diesel using ArF laser and oxygen.

A laser-based technique for deep desulfurization of diesel and other hydrocarbon fuels by removal of dimethyldibenzothiophene (DMDBT), a persistent sulfur contaminant in fuel oils has been developed. We report a selective laser excitation of DMDBT in diesel and model compounds such as n-hexane in a reaction chamber under oxygen environment where oxidative reactions can take place. ArF laser emitting at 193 nm was employed for excitation of oxygen and DMDBT, while for process optimization, the laser energy was varied from 50 to 200 mJ/cm(2). The laser-irradiated DMDBT solution under continuous oxygen flow was analyzed by UV absorption spectrometer to determine the photochemical oxidative degradation of DMDBT. In just 5 min of laser irradiation time, almost 95% DMDBT was depleted in a diesel containing 200 ppm of DMDBT. This article provides a new method for the removal of sulfur compounds from diesel by laser based photochemical process.

Photocatalytic deactivation of sulphate reducing bacteria using visible light active CuO/TiO2 nanocomposite photocatalysts synthesized by ultrasonic processing.

Sulphate-reducing bacteria wreaks havoc to oil pipelines, as it is an active agent for scale formation in the oil production tubing, and plugging of reservoir rock around the oil wells, and this leads to the degradation of oil quality. In this work, we synthesized copper oxide/titanium dioxide nanocomposite photocatalysts with three different mass contents of copper oxide (10%, 20% and 30%) and used them as an effective photo-catalyst in the process of photo-catalytic deactivation of sulphate-reducing bacteria. The anchoring of copper oxide on titanium dioxide brought about the following positive attributes in copper oxide/titanium dioxide nanocomposite pertained to the photo-catalyst: (i) the material transformed to visible light active with the potential to harness the more efficient visible spectral region of the solar radiation, (ii) increased surface area on the photo-catalyst enhanced the number of active reaction sites in the material, and (iii) efficiently retarded the undesired photo-generated electron hole recombination to promote the photo-catalytic activity. Although, the photo-catalyst effective under both UV and visible light, the deactivation was found to be higher in visible radiation, particularly the nanocomposite with 20%- copper oxide on titanium dioxide showed the highest photocatalytic degradation with of Sulphate-reducing bacteria with a decay constant as high as 1.38 min -1 and the total depletion time as low as 8 min. It was confirmed that the bacterial deactivation was neither due to the bactericidal effect of the nanocomposite nor due to the light mediated deactivation.

Role of vanadium ions substitution on spinel MnCo2O4 towards enhanced electrocatalytic activity for hydrogen generation.

Improving efficient electrocatalysts (ECs) for hydrogen generation through water splitting is of significant interest in tackling the upcoming energy crisis. Sustainable hydrogen generation is the primary prerequisite to realizing the future hydrogen economy. This work examines the electrocatalytic activity of hydrothermally prepared vanadium doped MnCo spinel oxide microspheres (MC), MnVxCo2-xO4 (Vx-MnCo MC, where x ≤ 0.4) in the HER (hydrogen evolution reaction) process. Magnetization measurements demonstrated a paramagnetic (at high temperatures) to a ferrimagnetic (at low temperatures) transition below the Curie temperature (Tc) in all the samples. The magnetization is found to intensify with the rising vanadium content of MCs. The optimized catalyst Vx-MnCo MCs (x = 0.3) outperformed other prepared ECs with a Tafel slope of 84 mV/dec, a low onset potential of 78.9 mV, and a low overpotential of 85.9 mV at a current density of 10 mA/cm2, respectively. The significantly improved HER performance of hydrothermally synthesized Vx-MnCo MCs (x = 0.3) is principally attributable to many exposed active sites, accelerated electron transport at the EC/electrolyte interface, and remarkable electron spectroscopy for chemical analysis (ECSA) value was found ~ 11.4 cm2. Moreover, the Vx-MnCo MCs (x = 0.3) electrode exhibited outstanding electrocatalytic stability after exposure to 1000 cyclic voltametric cycles and 36 h of chronoamperometric testing. Our results suggest a feasible route for developing earth-abundant transition metal oxide-based EC as a superior electrode for future water electrolysis applications.

Quantitative analysis of human hairs and nails.

Hair and nails are human biomarkers capable of providing a continuous assessment of the concentrations of elements inside the human body to indicate the nutritional status, metabolic changes, and the pathogenesis of various human diseases. Laser-induced breakdown spectroscopy (LIBS) and X-ray fluorescence (XRF) spectrometry are robust and multi-element analytical techniques able to analyze biological samples of various kinds for disease diagnosis. The primary objective of this review article is to focus on the major developments and advances in LIBS and XRF for the elemental analysis of hair and nails over the last 10-year period. The developments in the qualitative and quantitative analyses of human hair and nail samples are discussed in detail, with special emphasis on the key aspects of elemental imaging and distribution of essential and non-essential elements within the hair and nail tissue samples. Microchemical imaging applications by LIBS and XRF (including micro-XRF and scanning electron microscopy, SEM) are also presented for healthy as well as diseased tissue hair and nail samples in the context of disease diagnosis. In addition, main challenges, prospects, and complementarities of LIBS and XRF toward analyzing human hair and nails for disease diagnosis are also thoroughly discussed here.

Effects of selenium supplementation on the growth performance, slaughter characteristics, and blood biochemistry of naked neck chicken.

This study examined how selenium-supplemented diets affected the performance of naked neck chickens. The birds were fed both organic and inorganic selenium at 0.30 ppm, while the control diet did not include any additional selenium. A total of 225 one-day-old naked neck chicks were randomly divided into 3 experimental groups, each of which was replicated 5 times (replicates) and contained 15 birds. This was done using a completely randomized design. The data was collected after growth, meat quality, and blood profile parameters were assessed. The findings showed that the birds fed inorganic selenium in the diet displayed increased (P < 0.05) feed intake followed by those administered organic selenium and the control diet. On the other hand, birds fed organic selenium in the diet showed enhanced body weight gain and better feed conversion ratio (P < 0.05). Similarly, organic selenium supplementation increased (P < 0.05) breast and thigh weight compared to inorganic selenium, but no other metrics, such as dressing percentage, drumstick weight, liver weight, gizzard weight, heart weight, or wing weight, significantly differed between treatments (P > 0.05). When compared to birds fed inorganic Se and control diet, the birds fed organic Se had greater (P < 0.05) blood levels of total protein and globulin. Additionally, it was discovered that organic Se-fed birds had greater (P < 0.05) blood Se concentrations than control and inorganic Se-fed birds. However, no differences between treatments were found in albumin, glucose, cholesterol, triglycerides, or uric acid (P > 0.05). In conclusion, adding Se-enriched yeast, as an organic selenium source, to diets may enhance the poor growth and slaughter characteristics of naked neck chicks without negatively affecting blood chemistry.

Organoleptic characteristics and compositional profile of meat of growing Japanese quail fed different levels of poultry byproducts compost.

The poultry industry generates a lot of waste, including dead birds, manure, and poultry litter. Poultry waste should never be disposed of improperly because it can seriously harm the environment. The waste can be recycled as a feedstock for use in poultry feed by composting the litter and deceased birds. The compositional profile and organoleptic properties of the meat of growing Japanese quail were examined over the course of a 4-week trial to ascertain the effect of adding compost to the diet. In a completely randomized design (CRD), 1200 newly hatched quail chicks (Coturnix coturnix japonica) were divided into five treatment groups (diets with 0, 2.5, 5, 7.5, and 10% compost), each consisting of 40 birds with six replicates. The addition of compost to the diet had no noticeable effects on the organoleptic qualities of appearance, color, aroma, taste, texture, juiciness, tenderness, and acceptability (P>0.05). The compositional profile characteristics for chicks given compost at any level compared to chicks fed the control diet showed no differences (P>0.05). These findings suggest that the sensory characteristics and compositional profile of growing meat quails can be maintained when fed diets including up to 10% compost.

Assessing effect of feeding poultry byproducts compost on organoleptic characteristics and compositional profile of meat of broiler chickens.

Large amounts of waste, including dead birds, manure, and poultry litter, are produced by the poultry industry. Poultry waste should be disposed of properly to avoid major pollution and health risks. Composting litter and dead birds could be an option to recycle the waste and use in poultry feed. A study was conducted to investigate the effects of feeding composted poultry waste on the organoleptic qualities and compositional profile of the meat of broiler chickens. A total of 300 day-old broiler chicks (500-Cobb) were randomly allocated to five treatment groups replicated six times with 10 birds each, under a completely randomized design (CRD). Five iso-caloric and iso-nitrogenous diets including composted poultry byproducts at concentrations of 0, 2.5, 5, 7.5, and 10% were fed ad libitum to the birds from day 0 to day 35. The sensory grading and meat composition profile of 500 Cobb broiler chickens were tested at 35 days of age. The findings showed that there were no variations in the sensory profiles of the meat from birds given various diets (P>0.05). Although the results were somewhat lower for the chicks fed compost-containing diets than for the control group, this difference was deemed to be insignificant (P>0.05). Similarly, there were no variations in the compositional profile values of the meat between meat from birds fed various diets (P>0.05). These findings imply that broiler chickens may be raised on diets containing up to 10% poultry byproduct compost without any negative impacts on the meat's sensory quality or composition. Additionally, using compost into broiler diets may help to lower the cost of feed.

Customization of surface wettability of nano-SiO2 by coating Trimethoxy(vinyl)silane modifier for oil-water separation: Fabrication of metal-based functional superwetting nanomaterial, characterizations and performance evaluation.

The wettability of nano-SiO2 surface was transformed from the inherent hydrophilicity to functional superhyderophobicity by coating Trimethoxy (vinyl)silane modifier, and the resultant surface showed contrasting wettability for water and oil (Superhydrophobic and Superoleophilic), which is a desired characteristic for the membranes used in oil-water separation. Initially Trimethoxy (vinyl)silane coated SiO2 nanoparticles (TMVS@SiO2) were synthesized by hydrolysis and poly-condensation reactions, and this nano dispersion was spray coated on the annealed stainless-steel mesh surface, whose resulting hierarchical surface texture brought about the desired wettability, with the water-surface-air (θWA) and oil-surface-air (θOA) interfacial contact angles of 150° and 0° respectively. In addition to the wettability studies (contact angles), FTIR, morphological, and elemental characterizations of the TMVS@SiO2 coated surfaces were carried out to understand the alterations that have taken place on the TMVS@SiO2 surface that in turn rendered superhydrophobicity and superoleophilicity to the surface. The FTIR absorption peaks indicate that after modifying SiO2 with TMVS, the -OH groups on SiO2 surface are clearly replaced by -CH3. The morphological studies indicated that modification of SiO2 leads to better cross-linking between coating composition and nanoparticles and EDS spectra and elemental mapping of the modified surface showed the presence of Si, O and C elements. Finally, this surface was tested for its efficiency and stability as a membrane in the process of separating oil and water from the oily water using gravity driven method. The oil-water separation efficiency was estimated to be 99% for this membrane and also it was found to be quite stable as the surface effectively retained this oil-water separation efficiency even after 10 cycles of separation process.

Rapid Determination and Quantification of Nutritional and Poisonous Metals in Vastly Consumed Ayurvedic Herbal Medicine (Rejuvenator Shilajit) by Humans Using Three Advanced Analytical Techniques.

Shilajit is used commonly as Ayurvedic medicine worldwide which is Rasayana herbo-mineral substance and consumed to restore the energetic balance and to prevent diseases like cognitive disorders and Alzheimer. Locally, Shilajit is applied for patients diagnosed with bone fractures. For safety of the patients, the elemental analysis of Shilajit is imperative to evaluate its nutritional quality as well as contamination from heavy metals. The elemental composition of Shilajit was conducted using three advanced analytical techniques (LIBS, ICP, and EDX). For the comparative studies, the two Shilajit kinds mostly sold globally produced in India and Pakistan were collected. Our main focus is to highlight nutritional eminence and contamination of heavy metals to hinge on Shilajit therapeutic potential. In this work, laser-induced breakdown spectroscopy (LIBS) was applied for qualitative and quantitative analysis of the Shilajit. Our LIBS analysis revealed that Shilajit samples composed of several elements like Ca, S, K, Mg, Al, Na, Sr, Fe, P, Si, Mn, Ba, Zn, Ni, B, Cr, Co, Pb, Cu, As, Hg, Se, and Ti. Indian and Pakistani Shilajits were highly enriched with Ca, S, and K nutrients and contained Al, Sr, Mn, Ba, Zn, Ni, B, Cr, Pb, As, and Hg toxins in amounts that exceeded the standard permissible limit. Even though the content of most elements was comparable among both Shilajits, nutrients, and toxins, in general, were accentuated more in Indian Shilajit with the sole detection of Hg and Ti. The elemental quantification was done using self-developed calibration-free laser-induced breakdown spectroscopy (CF-LIBS) method, and LIBS results are in well agreement with the concentrations determined by standard ICP-OES/MS method. To verify our results by LIBS and ICP-OES/MS techniques, EDX spectroscopy was also conducted which confirmed the presence above mentioned elements. This work is highly significant for creating awareness among people suffering due to overdose of this product and save many human lives.

Assessing growth performance, morphometric traits, meat chemical composition and cholesterol content in four phenotypes of naked neck chicken.

The present study was conducted to assess the growth performance, morphometric traits, muscle chemical composition and cholesterol content in four phenotypes of naked neck chicken (black, white-black, light brown and dark brown). A total of 320-day-old chicks, 80 from each phenotype, were randomly stratified into 20 replicates (16/replicate), according to a completely randomized design. The results showed higher final body weight, weight gain, and better FCR in both light brown and dark brown phenotypes whereas time of gains was found to be greater in dark brown phenotype. Keel length and shank circumference were greater in dark brown whereas wing spread was found to be higher in light brown phenotype. Drumstick circumference and body length did not show any significant differences (P > 0.05) across the phenotypes. Dry matter was found to be higher in white black, crude protein in black, white black and dark brown, moisture in light brown, and cholesterol content in black whereas ether extract and ash content were found to be greater in black and white black phenotypes. In conclusion, both light brown and dark brown phenotypes showed superior growth performance and morphometric traits. Similarly, from a health point of view, the dark brown and light brown phenotypes seem superior because their cholesterol content was low. Thus, it is strongly recommended that there should be a conscious effort to improve economically important traits of the light and dark brown birds to be used as dual-purpose slow growing chicken, especially in developing countries.

Sensitivity enhancement at 594.8 nm atomic transition of Cl I for chloride detection in the reinforced concrete using LIBS.

A new atomic line at 594.8 nm of neutral chlorine (Cl I) has been used as a marker to quantify the amount of chloride present in the concrete sample using Laser Induced Breakdown Spectroscopy (LIBS). Although, the relative intensity of the 594.8 nm line is 1000-fold less than that of the most commonly used intense atomic line of Cl I at 837.5 nm reported in the literature, the limit of detection of chlorine achieved with our set-up in the concrete sample using the new line is comparable with the 837.5 nm. This clearly indicates that the sensitivity of the LIBS system for detection of chlorine in concrete sample using 594.8 nm is at least 1000-fold more than the one using 837.5 nm, which can be attributed to the characteristic less self absorption. LIBS data for different concentration of chloride content in concrete sample was also carried out and a calibration curve was drawn. The excitation scheme for 594.8 nm line is also proposed in this work.

Nutritional and toxic elemental analysis of dry fruits using laser induced breakdown spectroscopy (LIBS) and inductively coupled plasma atomic emission spectrometry (ICP-AES).

Quantitative investigation of essential and trace heavy elements present in health-beneficial dry fruits (Pistachio, Almonds, Black walnut, White walnut, and Cashew) was investigated using Laser Induced Breakdown Spectroscopy. For an accurate elemental exposure using LIBS technique, the local thermo-dynamical equilibrium of the laser induced plasma was established and verified using McWhirter criterion based on the electron number density in the plasma. Earlier to engage, our LIBS detector was optimized. For quantification of elements, standard calibration curves (CC)-LIBS method was applied. Using our LIBS system, the nutritional elements such as Al, Mg, Ca, Fe, K, Zn, and Na and toxins like Pb, Cr, and Cu were detected in dry fruits. The elemental quantification of dry fruit contents were validated using standard (ICP-AES) method and the relative accuracy of our experimental setup in comparison to ICP approach was in the ranging from 0.1 to 0.3 at 2.5-% error confidence.