Identification of a new microcystin-degrading bacterium isolated from Lake Chaohu, China.

A microcystin-LR (MC-LR)-degrading bacterium was isolated from Lake Chaohu, a eutrophic freshwater lake containing toxic cyanobacterial blooms. Based on the analysis of 16S rDNA gene sequence and physiobiochemical characteristics, the isolated strain, most likely belongs to the genus Bacillus with the highest sequence similarity value with Bacillus nanhaiencis strain K-W39 (JQ799091.1), was named B. nanhaiencis strain JZ-2013. The strain JZ-2013 could grow on mineral salt medium supplied with MC-LR as sole carbon and nitrogen sources. The optimal temperature and pH for strain JZ-2013 growth and MC-LR biodegradation were 30°C and 8.0, respectively. The MC-LR with the initial concentration of 15 mg/L could be consumed 80 % by strain JZ-2013 within 9 days. The existence of exogenous carbon and nitrogen sources could significantly increase the removal efficiency of MC-LR. The strain JZ-2013 can efficiently removed MC-LR of low concentration in real water sample.

Self-assembled phytosterol-fructose-chitosan nanoparticles as a carrier of anticancer drug.

Self-assembled nanoparticles were synthesized from water-soluble fructose-chitosan, substituted by succinyl linkages with phytosterols as hydrophobic moieties for self-assembly. The physicochemical properties of the prepared self-assembled nanoparticles were characterized by Fourier transform infrared spectroscopy, fluorescence spectroscopy, and transmission electron microscopy. Doxorubicin (DOX), as a model anticancer drug, was physically entrapped inside prepared self-assembled nanoparticles by the dialysis method. With increasing initial levels of the drug, the drug loading content increased, but the encapsulation efficiency decreased. The release profiles in vitro demonstrated that the DOX showed slow sustained released over 48 h, and the release rate in phosphate buffered saline (PBS) solution (pH 7.4) was much slower than in PBS solution (pH 5.5 and pH 6.5), indicating the prepared self-assembled nanoparticles had the potential to be used as a carrier for targeted delivery of hydrophobic anticancer drugs with declined cytotoxicity to normal tissues.

Codelivery of DOX and siRNA by folate-biotin-quaternized starch nanoparticles for promoting synergistic suppression of human lung cancer cells.

In this paper, the self-assembled folate-biotin-quaternized starch nanoparticles (FBqS NPs) were used as carrier system of doxorubicin (DOX) and siRNAIGF1R for the codelivery of both into human lung adenocarcinoma cell lines (A549 cells) in vitro. The cytotoxicity, targeted ligand competition, cell proliferation inhibition, cellular uptake, endocytosis mechanism and target protein suppression of drug-loaded FBqS NPs were evaluated in detail. Compared with several other drug formulations under same condition, siRNAIGF1R/DOX/FBqS NPs exhibited the greatest cytotoxicity to A549 cells and the cytotoxicity was competitively inhibited by free folate in dose-dependent manner. The A549 cells treated by siRNAIGF1R/DOX/FBqS NPs showed the lowest cell proliferation capacity. The energy-dependent clathrin- and caveolae-mediated endocytosis might be the primary cellular uptake mechanism of drug-loaded FBqS NPs. The expression of IGF1R protein in A549 cells treated by siRNAIGF1R/FBqS NPs declined dramatically. So the FBqS NPs were expected as the co-carrier system of chemotherapeutants and siRNAs for future clinical application.

Kinetics and thermodynamics of basic dye sorption on phosphoric acid esterifying soybean hull with solid phase preparation technique.

In this paper, the solid phase preparation method of a cationic sorbent, which bears hydroxyl groups of phosphoric acid derived from esterified soybean hull (ESH), was reported. The sorption kinetics and thermodynamics of two basic dyes, acridine orange (AO) and malachite green (MG), from aqueous solution onto ESH were investigated with a batch system. The isothermal data of dye sorptions followed the Langmuir model better than the Freundlich model. The maximum sorption capacity (Q(m)) of ESH for AO and MG was 238.1 mg/g and 178.57 mg/g, respectively. The dye sorption processes could be described by the pseudo-second-order kinetic model. The thermodynamic study indicated that the dye sorptions were spontaneous and exothermic. Lower temperatures were favorable for the sorption processes.

Oral insulin delivery by carboxymethyl-ß-cyclodextrin-grafted chitosan nanoparticles for improving diabetic treatment.

In this paper, a new oral insulin formulation, insulin-loaded carboxymethyl-ß-cyclodextrin-grafted chitosan nanoparticles (insulin/CMCD-g-CS NPs), was fabricated by ionic crosslinking technique. The therapeutic efficacy of new formulation was investigated in detail. Firstly, the CMCD-g-CS was synthesized by EDC-mediated esterification reaction. The prepared CMCD-g-CS exhibited favourable loading capacity and encapsulation efficiency of drug. The release experiment in vitro showed that the nanocarrier could efficiently protect encapsulated insulin at simulated gastric environment and release drug in the simulated colonic fluid. The insulin/CMCD-g-CS NPs effectively promoted drug internalization into Caco-2 cells and could reversibly open the tight junction between cells. The oral administration of insulin/CMCD-g-CS NPs could lastingly decrease blood sugar level in diabetic mice. The liver function study verified that the insulin/CMCD-g-CS NPs had not obvious toxicity to experimental mice. Therefore, the CMCD-g-CS could be an effective and safe oral insulin delivery carrier for future clinical application. A new biocompatible polysaccharide nanoparticle was fabricated as oral insulin delivery carrier for improving diabetic treatment.

Uptake of cationic dyes from aqueous solution by biosorption onto granular kohlrabi peel.

A new, low cost, locally available biomaterial was tested for its ability to remove cationic dyes from aqueous solution. Granules prepared from kohlrabi peel had been utilized as a sorbent for uptake of three cationic dyes, methylene blue (MB), neutral red (NR) and acridine orange (AO). The effects of various experimental parameters (e.g., dye concentration, particle size, initial pH, contact time and other factors) were investigated and optimal experimental conditions were ascertained. Above the value of initial pH 4, three dyes studied could be removed effectively. The isothermal data fitted the Langmuir model in the case of NR sorption and the Freundlich model for all three dyes sorption. The biosorption processes followed the pseudo-first-order rate kinetics. The results in this study indicated that kohlrabi peel was an attractive candidate for removing cationic dyes from the dye wastewater.

Fabrication of self-assembled folate-biotin-quaternized starch nanoparticles as co-carrier of doxorubicin and siRNA.

In this paper, the starch was firstly modified by quaternary reagent to obtain cationic starch. Then self-assembled folate-biotin-quaternized starch nanoparticles were prepared by a one-pot synthesis via N,N'-dicyclohexylcarbodiimide/N-hydroxysuccinimide/4-dimethylaminopyridine-mediated esterification reaction. The physicochemical properties of the prepared folate-biotin-quaternized starch nanoparticles were characterized. The average diameter of folate-biotin-quaternized starch nanoparticles was 109 nm with polydispersity index of 0.183 and zeta potential of 28.59 mV. The folate-biotin-quaternized starch nanoparticles were used as co-carrier of siRNA and doxorubicin with satisfactory drug loading capacity (6.98%) and encapsulation efficiency (69.66 %), and siRNA could be efficiently encapsulated at 40/1 weight ratio of doxorubicin/folate-biotin-quaternized starch nanoparticles to siRNA. The folate-biotin-quaternized starch nanoparticles could effectively protect siRNA from degradation of serum RNAase for up to 48 h. The release characteristics of doxorubicin and siRNA from folate-biotin-quaternized starch nanoparticles were studied in different pH environment and the release behaviors of two drugs were all pH sensitive. The folate-biotin-quaternized starch nanoparticles as a potential co-carrier of anticancer agents and gene drugs was expected to achieve future practical application in vitro and in vivo.

Enhanced malachite green removal from aqueous solution by citric acid modified rice straw.

In this paper, rice straw was thermochemically modified with citric acid (CA) as esterifying agent. Two introduced free carboxyl groups of esterified rice straw were further loaded with sodium ion to yield potentially biodegradable cationic sorbent. In order to investigate the effect of chemical modification on the cationic dye sorption of rice straw, the removal capacities of native and modified rice straw sorbing a cationic dye (malachite green) from aqueous solution were compared. The effects of various experimental parameters (e.g. initial pH, sorbent dose, dye concentration, contact time) were investigated. For modified rice straw (MRS), the malachite green (MG) removal percentage came up to the maximum value beyond pH 4. For the 250 mg/l of MG solution, the 1.5 g/l or up of MRS could almost completely remove the dye from aqueous solution. Under the condition of 2.0 g/l sorbent used, the percentage of MG sorbed on MRS kept above 93% over a range from 100 to 500 mg/l of MG concentration. The sorption isotherms fitted the Langmuir or Freundlich models. The sorption equilibriums were reached at about 10 h. The sorption processes followed the pseudo-first-order rate kinetics. After chemical modification, the intraparticle diffusion rate constant (k(id)) was obviously increased. The results in this study indicated that MRS was an excellent sorbent for removal of MG from aqueous solution.

Lead biosorption and desorption by intact and pretreated spirulina maxima biomass.

In order to search for locally available and untried biomaterials in China with high removal capacity of heavy metals from wastewater, the feasibility of Spirulina maxima as biosorbent for lead removal and recovery from aqueous solution was investigated. The lead biosorption was studied by using intact biomass and pretreated biomass of S. maxima. The effects of operational conditions (e.g. pH, contact time, biomass concentration etc.) on lead biosorption were investigated. The biosorption was solution pH dependent and the maximum adsorption was obtained at a solution pH of about 5.5. The adsorption equilibrium was reached in 60 min. The biosorption followed the Freundlich isotherm model. The maximum removal ratios of lead were about 84% in intact biomass and 92% in pretreated biomass. The lead adsorbed could be desorbed effectively by 0.1 M nitric acid, EDTA and hydrochloric acid. The results in this study indicated that pretreated biomass of S. maxima was a promising candidate for removing lead from wastewater.

Removal of cationic dyes from aqueous solution by adsorption on peanut hull.

The potential feasibility of peanut hull particle for removal of three cationic dyes (methylene blue, brilliant cresyl blue and neutral red) from aqueous solution was investigated. The effects of various experimental parameters were examined and optimal experimental conditions were decided. Above the value of initial pH 4, three dyes studied could be removed effectively. The isothermal data fitted the Langmuir model or Freundlich model. The adsorption processes followed the pseudo-first-order rate kinetics. The results in this study indicated that peanut hull was an attractive candidate for removing cationic dyes from dye wastewater.

Folate mediated self-assembled phytosterol-alginate nanoparticles for targeted intracellular anticancer drug delivery.

Self-assembled core/shell nanoparticles (NPs) were synthesized from water-soluble alginate substituted by hydrophobic phytosterols. Folate, a cancer-cell-specific ligand, was conjugated to the phytosterol-alginate (PA) NPs for targeting folate-receptor-overexpressing cancer cells. The physicochemical properties of folate-phytosterol-alginate (FPA) NPs were characterized by nuclear magnetic resonance, transmission electron microscopy, dynamic light scattering, electrophoretic light scattering, and fluorescence spectroscopy. Doxorubicin (DOX), an anticancer drug, was entrapped inside prepared NPs by dialysis method. The identification of prepared FPA NPs to folate-receptor-overexpressing cancer cells (KB cells) was confirmed by cytotoxicity and folate competition assays. Compared to the pure DOX and DOX/PA NPs, the DOX/FPA NPs had lower IC50 value to KB cells because of folate-receptor-mediated endocytosis process and the cytotoxicity of DOX/FPA NPs to KB cells could be competitively inhibited by free folate. The cellular uptake and internalization of pure DOX and DOX/FPA NPs was confirmed by confocal laser scanning microscopy image and the higher intracellular uptake of drug for DOX/FPA NPs over pure DOX was observed. The FPA NPs had the potential as a promising carrier to target drugs to cancer cells overexpressing folate receptors and avoid cytotoxicity to normal tissues.

Functionalization of sawdust with monosodium glutamate for enhancing its malachite green removal capacity.

In this paper, waste sawdust was functionalized by monosodium glutamate for improving its cationic sorption capacity. The functionalized sawdust (FS) and crude sawdust (CS) were compared for their malachite green (MG) sorption behaviors with a batch system. The effects of various experimental parameters (e.g. initial pH, sorbent dose, dye concentration, contact time, and temperature etc.) were investigated and the sorption kinetic and thermodynamic characteristics were understood. The MG removal ratios on FS and on CS increased with increasing initial pH and came up to the maximum value beyond pH 6 for FS and pH 8 for CS, respectively. The ratio of sorbed MG kept above 95% for 250 mg/l of MG solution when 2.0 g/l or more of FS was used. The MG removal percentage decreased more on CS than on FS with increasing initial MG concentration. The isothermal data of MG sorbed on FS and on CS followed the Langmuir model. By functionalizing, the sorption capacity (Q(m)) of sawdust for MG was increased from 85.47 to 196.08 mg/g and the sorption equilibrium time of MG was shortened from 23 to 4.5 h. The MG sorption processes on FS and on CS followed the pseudo-second-order rate kinetics. The sorptions of MG on FS and on CS were spontaneous and exothermic processes and lower temperatures were favorable for the sorption processes.

Thermochemical esterifying citric acid onto lignocellulose for enhancing methylene blue sorption capacity of rice straw.

In this paper, rice straw was esterified thermochemically with citric acid (CA) to produce potentially biodegradable cationic sorbent. The modified rice straw (MRS) and crude rice straw (CRS) were evaluated for their methylene blue (MB) removal capacity from aqueous solution. The effects of various experimental parameters (e.g., initial pH, sorbent dose, dye concentration, ion strength, and contact time) were examined. The ratio of MB sorbed on CRS increased as the initial pH was increased from pH 2 to 10. For MRS, the MB removal ratio came up to the maximum value beyond pH 3. The 1.5 g/l or up of MRS could almost completely remove the dye from 250 mg/l of MB solution. The ratio of MB sorbed kept above 98% over a range from 50 to 450 mg/l of MB concentration when 2.0 g/l of MRS was used. Increase in ion strength of solution induced decline of MB sorption. The isothermal data fitted the Langmuir model. The sorption processes followed the pseudo-first-order rate kinetics. The intraparticle diffusion rate constant (k(id)) was greatly increased due to modification.

[Adsorption behavior of copper ion and methylene blue on citric acid- esterified wheat straw].

A cationic adsorbent with carboxyl groups derived from citric acid- esterified wheat straw (EWS) was prepared by the method of solid phase preparation, and a batch experiment was conducted to study the adsorption behaviors of Cu (II) and methylene blue (MB) in aqueous solution on the EWS under conditions of different initial pH, adsorbent dosage, adsorbate concentration, and contact time. The results showed that the maximum adsorption of Cu (II) and MB was obtained when the initial solution pH was > or = 4.0. 96% of Cu (II) in 100 mg x L(-1) Cu solution and 99% of MB in 250 mg x L(-1) dye solution could be removed by > or = 2.0 g x L(-1) of EWS. The adsorption of Cu (II) and MB fitted the Langmuir sorption isothermal model. The maximum removal capacity (Qm) of EWS was 79.37 mg x g(-1) for Cu (II) and 312.50 mg x g(-1) for MB, and the adsorption equilibrium of Cu (II) and MB was reached within 75 min and 5 h, respectively. The adsorption processes of Cu (II) and MB could be described by pseudo-first order and pseudo-second order kinetic functions, respectively.

[Utilization of powdered peanut hull as biosorbent for removal of anionic dyes from aqueous solution].

An untried, low cost, locally available biosorbent for its anionic dye removal capacity from aqueous solution was investigated. Powder prepared from peanut hull had been used for biosorption of three anionic dyes, amaranth (Am), sunset yellow (SY) and fast green FCF (FG). The effects of various experimental parameters (e.g. initial pH and dye concentration, sorbent dosage, particle size, ion strength, contact time etc.) were examined and optimal experimental conditions were decided. At initial pH 2.0, three dyes studied could be removed effectively. When the dye concentration was 50 mg x L(-1), the percentages of dyes sorbed was 95.5% in Am, 91.3% in SY and 94.98% in FG, respectively. The ratios of dyes sorbed had neared maximum values in all three dyes when sorbent dose of 5.0 g x L(-1) and the sorbent particle size in 80-100 mesh was used. The increasing the ion strength of solution caused the decrease in biosorption percentages of dyes. The equilibrium values arrived at about 36 hour for all three dyes. The isothermal data of biosorption followed the Langmuir and Freundlich models. The biosorption processes conformed the pseudo-first-order rate kinetics. The results indicated that powdered peanut hull was an attractive candidate for removing anionic dyes from dye wastewater.