Social acceptance, emissions analysis and potential applications of paper-waste briquettes in Andean areas.

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg-1) and CO emissions (22.89 ± 2.40 g kg-1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg-1 and 48.10 ± 12.50 gCO kg-1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials.

Environmental assessment of construction and demolition waste recycling in Bolivia: Focus on transportation distances and selective collection rates.

Construction and demolition waste (CDW) management in developing countries is a global concern. The analysis of scenarios and the implementation of life cycle assessment (LCA) support decision-makers in introducing integrated CDW management systems. This paper introduces the application of an LCA in La Paz (Bolivia), where CDW is mainly dumped in open areas. The aim of the research is to evaluate the benefits of inert CDW recycling in function of the selective collection rate, defined as the amount of waste (%wt.) sorted at the source in relation to the total waste amount produced, and the distances from the CDW generation to the material recycling facility. The outcomes of the research suggest that increasing the selective collection rates (5% to 99%) spread the importance of transportation distances planning since it affects the magnitude of the environmental impacts (1.05 tCO2-eq to 20.7 tCO2-eq per km traveled). Transportation limits have been found to be lower than about 40 km in order to make recycling beneficial for all environmental impacts and for all selective collection rate, with the eutrophication potential as the limiting indicator. The theoretical analysis suggests implementing LCA with primary data and involving statistics related to the transportation of virgin materials avoided thanks to recycling. The outcomes of the research support the implementation of CDW recycling in developing countries since it has been found that material recovery is always beneficial.

Application of a life cycle assessment for assessing municipal solid waste management systems in Bolivia in an international cooperative framework.

Using a life cycle assessment (LCA) to evaluate municipal solid waste management (MSWM) systems is strongly recommended and the approach has been used in high-income contexts. However, stakeholders in low to middle income countries are not aware of the potential of this approach, mainly due to a lack of financial resources and technical ability. The present work introduces a LCA of MSWM system scenarios into a developing city using an academic licence for the LCA software that is available for use exclusively by researchers. The MSWM system in place in 2018 in La Paz (Bolivia) was assessed according to seven scenarios. The novelty of the research is twofold: the use of LCA academic licensing in a low to middle income region where LCA is unknown as planning tool; and discussing the potential of the approach in conjunction with local and international stakeholders with a view to starting MSWM projects. The results of the analysis allow for the consideration of energy recovery and materials recycling as the main methods by which the environmental impact of MSW can be reduced, as has also been reported by other LCA studies conducted with full licensing of the relevant software. Moreover, the research is the basis for cooperative development projects that will adopt the LCA approach as the main assessment tool. The study discusses the importance of cooperation between universities and local governments for implementing new strategies for MSWM assessment and planning. The research is a contribution towards improving technical knowledge in developing countries for boosting sustainable development.

Application of healthcare waste indicators for assessing infectious waste management in Bolivia.

In the developing world, healthcare waste management is a human health and environmental burden that should be solved for improving sustainability. Solutions should be introduced in the short term, concerning management, planning, financial assistance and expertise. The paper introduces an indicator set for assessing healthcare waste management in developing cities, implemented in La Paz (Bolivia) as a case study. The objective is to suggest an integrated management tool as a first assessment technique to identify the prevailing problems with a healthcare waste management system. Results suggest that, in La Paz, the application of such indicators is useful for evaluating which priorities should be addressed for improving the healthcare waste management system. The tool was applied for introducing a study necessary for the application of new management plans, especially concerning healthcare waste treatment. The method can be replicated in other contexts worldwide, with a focus on the developing world, for comparing cities, management solutions and improvements carried out along the years. The approach is of interest for boosting sustainability and human health, improving the awareness of the actors and policy-makers involved in waste management.

Introduction of the circular economy within developing regions: A comparative analysis of advantages and opportunities for waste valorization.

The introduction of effective solid waste management strategies in developing countries should be considered for improving sustainability at global level. Many barriers should be overcome, concerning the introduction of environmental policies, effective investments, social inclusion and public awareness, which are significant issues in low-middle income countries. The Circular Economy could represent the answer for improving current solid waste management activities worldwide, since denote the principle of waste valorization and recycling for boosting developing economies. This paper is focused on this theme, analyzing main opportunities for improving the current state of solid waste management in developing big cities. The solid waste management of two countries are reviewed: Romania is the emerging country where Circular Economy is becoming a future objective due to economic aids and strength regulations which the European Union (EU) established for the nations forming parts the alliance; as a comparison, Bolivia is reported for evaluating main differences founded for developing recycling systems in a no-EU country. These two case studies could be of interest for highlighting main pros and cons of the participation into a wide organization like the EU for introducing in short terms Circular Economy principles. Moreover, a theoretical Circular Economy model for developing big cities in low-middle income countries is described within the study for effectively comparing which chances can spread for these countries as regard municipal solid waste exploitation. Despite the economic level, Romania and Bolivia are both facing with many solid waste management issues although in different magnitude. For the Romanian case study, it is visible how it cannot achieve the European goals for 2020 due the need of change in public recycling behavior. Bolivia, instead, represents the case where international aids and new investments are required, considering the informal sector into the formal management system as a real opportunity for improving local recycling rate. In conclusion, the comparison suggests how external supports led to implement the principles of the Circular Economy within a developing region. The model of Circular Economy proposed is recommended for developing big cities in order to advance a new form of safe employment, encouraging the activities that are still in action (i.e. informal sector) and boosting the principles of sustainable development.

The municipal solid waste management of La Paz (Bolivia): Challenges and opportunities for a sustainable development.

Municipal solid waste management (MSWM) is considered an important public health, economic and environmental concern, especially in developing countries. This paper introduces the situation of MSWM in La Paz (Bolivia) in 2016, and is based on the Wasteaware indicators and waste flow analysis, useful tools for classifying and comparing waste treatment and management plans among other countries. Taking into account the lack of technology in waste treatment and the presence of a developed informal sector, the paper analyses the main strengths and weak points for implementing a sustainable MSWM. The research conducted revealed that the MSWM of La Paz is not efficient with regard to collection, recycling (8%), financial sustainability, and equity of the service. At the same time, local Government and stakeholders are interested in implementing new MSWM methods for improving the current sanitary state of the city and many efforts were made over the last ten years. In general terms, La Paz could be considered as a good study area for developing plans for waste valorization, becoming an example for a low-middle income developing big city of Latin America. The study provided a few considerations about the affordability of the methodology applied and critically analyzed the case study proposed.

Comparison of environmental impacts related to municipal solid waste and construction and demolition waste management and recycling in a Latin American developing city.

Construction and demolition waste (CDW) and municipal solid waste (MSW) are the waste flows mostly generated at a global level. In developing countries, most of these waste streams are disposed of in open dumps. Policy-makers should be informed in which priorities should be established in order to improve the quality of the environment. The current research compares the environmental impacts generated by the MSW and CDW management system of La Paz (Bolivia). The aim is to evaluate (1) which environmental impact indicators are more important per waste flow and (2) if recycling can be considered a good option for mitigating such environmental footprint. A life cycle assessment (LCA) of the formal MSW management and the CDW mismanagement (i.e., open dumping) were conducted. The analysis of the management system (2019) is compared with future developments in recycling that counts with the support of an international cooperative project financed by the Italian cooperation. Results reported that, at a municipal level, CDW mismanagement contributes more than 60% to the freshwater aquatic ecotoxicity, which represents the most relevant impact generated by this waste stream. Recycling allows achieving avoided impacts higher than the ones produced for three of six environmental impacts, suggesting MSW and CDW recovery as an important option for preventing environmental degradation. The research is the first attempt to highlight the importance of organizing appropriate CDW management systems into an integrated waste management scheme for mitigating environmental impacts in developing cities.

Perspectives in solid recovered fuel production in Bolivia: Analysis of characteristics and potential benefits.

Solid recovered fuels (SRF) can provide another treatment option to the solid waste management (SWM) sector. However, in developing countries, to date, this system approach has not found considerable application. In Bolivia, SRF is not deemed within the national regulation and the final disposal in open dumping areas is still a reality. This research article provides the first attempt in evaluating the SRF characteristics and its potentialities in Bolivia, taking La Paz as a case study. Laboratory analysis of the rejects produced after selective collection and sorting has been conducted, focusing on non-hazardous and non-recyclable waste fractions. The international standards related to EN 15359:2011 for the classification of the SRF were employed, assessing the most feasible mix of materials to provide the highest classification of SRF in terms of low calorific value (LCV), chlorine, and mercury concentration. Results reported that the SRF made of 80% plastics (85% PE and 15% PP) and 20% cellulosic (blend 2), as well as 30% plastics (50% PP and 50% PE) and 70% cellulosic (blend 1), can be considered an alternative fuel in Bolivia. On balance, it has been estimated that the use of non-recyclable plastics and cardboard from municipal solid waste can provide, on average, about 0.9-2.7 billion MJ of energy for cement kilns, solving about 1.4-5.3% of the SWM issues and covering about 8-23.4% of the energy demand for cement production in Bolivia. These results are novel for the scientific literature for estimating the potentialities of SRF in Latin America.

Sensitivity analysis and improvements of the recycling rate in municipal solid waste life cycle assessment: Focus on a Latin American developing context.

The life cycle assessment (LCA) of municipal solid waste (MSW) systems in developing countries is a matter of research. Obtain reliable results is challenging since field data and local databases are not always available. The research presented in this paper explores this issue in La Paz (Bolivia), where six environmental impact categories were assessed. The LCA, related to the formal MSW management system of the city, involves a sensitivity analysis of ten parameters and the scenario assessment in relation to the increase of the recycling rate. Results report that the environmental impacts are mostly sensitive in relation to landfill gas collection efficiency, use of plastic bags, the transportation distances of collected waste, and the replacement rate of virgin materials. Global warming potential is the impact category most variable (341.38-551.95 kg CO2-eq tMSW-1), although it is not considerably reduced by recycling, which contributed mostly to the human toxicity and freshwater aquatic ecotoxicity. Doubling the amount of MSW recycled, from 235 t to about 473 t per year, human toxicity potential reduces of about 18% while freshwater aquatic ecotoxicity of about 12%. This research contributes for evaluating the most sensitive parameters in an MSW-LCA and to support policymakers towards waste recycling and sustainable development in Latin America developing cities.

Assessment of municipal solid waste selective collection scenarios with geographic information systems in Bolivia.

The analysis of municipal solid waste (MSW) selective collection (SC) scenarios is compulsory for planning future policies and actions towards circular economy. The use of geographic information system (GIS) is appropriated for obtaining reliable data about SC yields and management costs. However, in low-middle income countries, advanced assessments are difficult to introduce due to the lack of technical knowledge, financial support and the presence of the informal recycling sector. This research aims to assess the main potentialities of the introduction of SC systems in a Bolivian developing city taking into account the informal SC system in place. The study was conducted with QGIS3.8 software in order to evaluate the main advantages of the implementation of formal and informal recycling chains. Results reported that, comparing the implementation of formal SC of MSW with the scenario that considered the inclusion of the informal recycling, the activity of waste pickers allows reducing the expenses of about 10%, increasing the recycling rate of about 3.5%, and reducing the distances traveled with compactor trucks of about 7%. It means that, the annual path traveled by the collection trucks for gathering about 16,000ty-1, is reduced by 2734kmy-1, reducing the waste disposed to landfill of about 543.6ty-1 and the expenses of about €59,000 per year. The presentation of these results to policy-makers can support decision-making boosting the implementation of recycling activities including waste pickers. The study provided a contribution to the scientific literature assessing the main challenges and opportunities for implementing the circular economy in developing regions.