Photocleavable Polymer Cubosomes: Synthesis, Self-Assembly, and Photorelease.

Polymer cubosomes (PCs) are a recent class of self-assembled block copolymer (BCP) microparticles with an accessible periodic channel system. Most reported PCs consist of a polystyrene scaffold, which provides mechanical stability for templating but has a limited intrinsic functionality. Here, we report the synthesis of photocleavable BCPs with compositions suitable for PC formation. We analyze the self-assembly mechanism and study the model release of dyes during irradiation, where the transition of the BCPs from amphiphilic to bishydrophilic causes the rapid disassembly of the PCs. A combination of modeling and experiment shows that the evolution of PCs proceeds first via liquid-liquid phase separation into polymer-rich droplets, followed by microphase separation within this droplet confinement, and finally, membrane reorganization into high internal order. This insight may encourage exploration of alternative preparation strategies to better control the size and homogeneity of PCs.

Steric Engineering of Rotaxane Catalysts: Benefits and Limits of Using the Mechanical Bond in Catalyst Design.

The mechanical bond is emerging as a novel design element in catalyst development. Here, we report a series of 1,1´­binaphthyl-2,2´-diol (BINOL) based catalysts in which the number of interlocked macrocycles is varied. Unsurprisingly, the macrocycles have a profound steric influence on the catalytic performance of these molecules. However, in the enantioselective transformations examined, the macrocycles are detrimental to catalyst stereoselectivity whereas in lactide polymerization, they increase the molecular weight of the polymeric product.

Unravelling Competitive Interactions between Polymer Side Chains and End Groups with ß-Cyclodextrin.

This study investigates unexpected competitive host-guest interactions of ß-cyclodextrin (ß-CD), which can occur with polymers in aqueous solution, using the examples of the two polymers poly(oligo(ethylene glycol) methyl ether methacrylate) and poly(glycerol mono methacrylate). Systematic structural modifications of the polymer provide insight into the host-guest interaction with ß-CD and the competition between side chains and end groups such as hydrophobic end groups remaining from reversible addition fragmentation chain transfer polymerization or intentionally implemented molecular recognition units such as arylazopyrazole photoswitches.

Synthesis and Self-Assembly of Poly(4-acetoxystyrene) Cubosomes.

Polymer cubosomes (PCs) are a recent class of self-assembled nanostructures with great application potential due to their high porosity and surface area. Currently, most reported PCs consist of polystyrene block copolymers (BCPs), for which self-assembly parameters are rather well understood. Changing the block chemistry would be desirable to introduce more functionality; however, knowledge of adapting the self-assembly process to new chemistries remains limited. This work, reports on synthesizing poly(ethylene oxide)-block-poly(4-acetoxystyrene) and its copolymers with styrene, and provide conditions for their self-assembly into PCs with high yield and high inner order. It is shown that the polarity of the starting solvent toward the corona block allows tuning of the final morphology by controlling the corona volume and packing parameter.

Mixtures of Acid- and Base-Functionalized Microparticles for One-Pot Cascade Reaction.

This study reports on the synthesis of surface-protected acid and base microparticles via surfactant-free emulsion polymerization. The protective layer allows to form particle mixtures with both colloidal catalysts that show excellent performance in a well-established model cascade reaction involving an acid-catalyzed deacetalization and a subsequent base-catalyzed Knoevenagel condensation. Compared to nanoreactors that contain both catalysts, the colloidal mixture shows comparable reaction kinetics despite the local separation of both catalysts onto separate particles. Since the synthesis of individual microparticles requires less steps, is scalable, and more versatile in terms of catalyst variation, colloidal mixtures are certainly an alternative to multifunctional nanoreactors, making them attractive for practical applications.

Effect of Surfactant Selectivity on Shape and Inner Morphology of Triblock Terpolymer Microparticles.

The confined assembly of block copolymers (BCPs) has become a useful tool to prepare microparticles with controlled anisotropy and inner structure. While a solid understanding of the behavior of AB diblock copolymers exists, knowledge on the parameters affecting ABC triblock terpolymer assembly is much more limited. In this work, the effect of block-selective surfactants, sodium-4-vinylbenzenesulfonate (VBS) and sodium dodecylsulfate (SDS), is analyzed in the evaporation-induced confined assembly (EICA) of a polystyrene-block-polybutadiene-block-poly(methyl methacrylate) triblock terpolymer (SBM). Despite using the same terpolymer and emulsification process, SDS results in ellipsoidal microparticles with axially stacked lamellae, while VBS results in spherical microparticles with concentric lamellae or 3D spiral morphology. This change in morphology upon switching the surfactant is further substantiated by molecular simulations and enhances the understanding of terpolymer microphase separation in confinement.

Confinement Assembly of Terpolymer-Based Janus Nanoparticles.

While the confinement assembly of block copolymers into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, the confinement self-assembly of JNPs in drying emulsion droplets is investigated and their behavior compared to their ABC triblock terpolymer precursors. Emulsions of both materials are prepared using Shirasu Porous Glass membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of Rh  = 250-500 nm (depending on the membrane pore radius, Rpore ). The internal structure of the microparticles is verified with transmission electron microscopy (TEM) on ultrathin cross sections and compared to the corresponding bulk morphologies. While the confinement assembly of terpolymers results in microparticles with ordered inner morphologies, order for JNPs diminishes when the Janus balance deviates from parity.

Soft synthetic microgels as mimics of mycoplasma.

Artificial model colloids are of special interest in the development of advanced sterile filters, as they are able to efficiently separate pleomorphic, highly deformable and infectious bacteria such as mycoplasma, which, until now, has been considered rather challenging and laborious. This study presents a full range of different soft to super soft synthetic polymeric microgels, including two types with similar hydrodynamic mean diameter, i.e., 180 nm, and zeta potential, i.e., -25 ± 10 mV, but different deformability, synthesized by inverse miniemulsion terpolymerization of acrylamide, sodium acrylate and N,N'-methylenebisacrylamide. These microgels were characterized by means of dynamic, electrophoretic and static light scattering techniques. In addition, the deformability of the colloids was investigated by filter cake compressibility studies during ultrafiltration in dead-end mode, analogously to a study of real mycoplasma, i.e., Acholeplasma laidlawii, to allow for a direct comparison. The results indicate that the variation of the synthesis parameters, i.e., crosslinker content, polymeric solid content and content of sodium acrylate, has a significant impact on the swelling behavior of the microgels in aqueous solution as well as on their deformability under filtration conditions. A higher density of chemical crosslinking points results in less swollen and more rigid microgels. Furthermore, these parameters determine electrokinetic properties of the more or less permeable colloids. Overall, it is shown that these soft synthetic microgels can be obtained with tailor-made properties, covering the size of smallest species of and otherwise similar to real mycoplasma. This is a relevant first step towards the future use of synthetic microgels as mimics for mycoplasma.

Scalable and Recyclable All-Organic Colloidal Cascade Catalysts.

We report on the synthesis of core-shell microparticles (CSMs) with an acid catalyst in the core and a base catalyst in the shell by surfactant-free emulsion polymerization (SFEP). The organocatalytic monomers were separately copolymerized in three synthetic steps allowing the spatial separation of incompatible acid and base catalysts within the CSMs. Importantly, a protected and thermo-decomposable sulfonate monomer was used as acid source to circumvent the neutralization of the base catalyst during shell formation, which was key to obtain stable, catalytically active CSMs. The catalysts showed excellent performance in an established one-pot model cascade reaction in various solvents (including water), which involved an acid-catalyzed deacetalization followed by a base-catalyzed Knoevenagel condensation. The CSMs are easily recycled, modified, and their synthesis is scalable, making them promising candidates for organocatalytic applications.

Size-Controlled Formation of Polymer Janus Discs.

A straightforward method is presented for the preparation of nano- to micrometer-sized Janus discs with controlled shape, size, and aspect ratio. The method relies on cross-linkable ABC triblock terpolymers and involves first the preparation of prolate ellipsoidal microparticles by combining Shirasu porous glass (SPG) membrane emulsification with evaporation-induced confinement assembly (EICA). By varying the pore diameter of the SPG membrane, we produce Janus discs with controlled size distributions centered around hundreds of nanometers to several microns. We further transferred the discs to water by mild sulfonation of PS to polystyrene sulfonic acid (PSS) and verified the Janus character by subsequent labelling with cationic nanoparticles. Finally, we show that the sulfonated Janus discs are amphiphilic and can be used as efficient colloidal stabilizers for oil-in-water (O/W) emulsions.

Vesicular Polymer Hexosomes Exhibit Topological Defects.

Polymer hexosomes are block copolymer solution morphologies that adopt an internal structure composed of an inverse hexagonal (HII) phase. To date, most polymer hexosomes are reportedly rotationally symmetric solid structures that possess a common feature where hexagonally ordered inverted cylinders rotate along a central axis of symmetry to form circular hoops. Here, we report on the formation of polymer hexosomes whose inverted cylinders orient in an unusual manner, forming hoops that are noncircular. For topological reasons, this led to the generation of four defects in the resulting hexosome structure. We find that these defect-bearing hexosomes are hollow, thereby resembling polymer vesicles or polymersomes with an inverse hexagonal cylindrical morphology in the shell. The topological defects of these so-called "vesicular hexosomes" are enticing as they could serve as a platform to spatially anchor targeting ligands or biomolecules on the surface, while the hollow cylindrical shell and the vesicular lumen could spatially accommodate cargoes within the different domains. We propose that these vesicular hexosomes do not form via a conventional nucleation-growth self-assembly pathway, but rather via a two-step process involving first liquid-liquid phase separation followed by polymer microphase separation.

pH-Controlled Hierarchical Assembly/Disassembly of Multicompartment Micelles in Water.

Multicompartment micelles (MCMs) have become attractive drug delivery systems as they allow the separate storage of two or more incompatible cargos in their core compartments (e.g., drugs and dyes for imaging). A recent hierarchical self-assembly process for hydrophobic terpolymers in organic solvents showed the ability to form very homogeneous MCM populations, yet the transfer of this process into water requires a better understanding of the formation mechanism and influence of chain mobility during assembly. Here, the synthesis of a linear poly(oligo(ethylene glycol) methacrylate)-block-poly(benzyl acrylate)-block-poly(4-vinylpyridine) (POEGMA-b-PBzA-b-P4VP) triblock terpolymer by reversible addition-fragmentation chain transfer (RAFT) polymerization is reported as well as its step-wise assembly into MCMs in water with POEGMA corona, PBzA patches, and P4VP core. Reversible assembly/disassembly of the MCMs is investigated through protonation/deprotonation of the P4VP core. Interestingly, the low glass transition temperature (Tg ) of the hydrophobic PBzA middle block causes MCMs to directly disassemble into molecularly dissolved chains instead of patchy micelles due to mechanical stress from electrosteric repulsion of the protonated P4VP corona chains. In addition, pH resistant MCMs are created by core-crosslinking and fluorescent properties are added by covalent anchoring of fluorescent dyes via straightforward click chemistry.

Soft Polymer Janus Nanoparticles at Liquid-Liquid Interfaces.

Soft polymeric Janus nanoparticles (JNPs), made from polystyrene-b-poly(butadiene)-b-poly(methylmethacrylate), PS-PB-PMMA, triblock terpolymers, assemble into a monolayer at the water-oil interface to reduce interfacial tension. The extent to which the polymer chains can deform influences the packing density of the JNPs at the interface. The longer the polymer chains are relative to the core, the softer are the JNPs, resulting in a JNPs assembly with a lower initial lateral packing density. The interfacial activity of JNPs can be further tuned by complexation of the PMMA chains with lithium ions that are introduced into the water phase. This work provides a fundamental understanding of soft JNPs packing at the water-oil interface and provides a strategy to tailor the areal density of soft JNPs at liquid-liquid interface, enabling the design of smart responsive structured-liquid systems.

Guided hierarchical co-assembly of soft patchy nanoparticles.

The concept of hierarchical bottom-up structuring commonly encountered in natural materials provides inspiration for the design of complex artificial materials with advanced functionalities. Natural processes have achieved the orchestration of multicomponent systems across many length scales with very high precision, but man-made self-assemblies still face obstacles in realizing well-defined hierarchical structures. In particle-based self-assembly, the challenge is to program symmetries and periodicities of superstructures by providing monodisperse building blocks with suitable shape anisotropy or anisotropic interaction patterns ('patches'). Irregularities in particle architecture are intolerable because they generate defects that amplify throughout the hierarchical levels. For patchy microscopic hard colloids, this challenge has been approached by using top-down methods (such as metal shading or microcontact printing), enabling molecule-like directionality during aggregation. However, both top-down procedures and particulate systems based on molecular assembly struggle to fabricate patchy particles controllably in the desired size regime (10-100 nm). Here we introduce the co-assembly of dynamic patchy nanoparticles--that is, soft patchy nanoparticles that are intrinsically self-assembled and monodisperse--as a modular approach for producing well-ordered binary and ternary supracolloidal hierarchical assemblies. We bridge up to three hierarchical levels by guiding triblock terpolymers (length scale ∼10 nm) to form soft patchy nanoparticles (20-50 nm) of different symmetries that, in combination, co-assemble into substructured, compartmentalized materials (>10 µm) with predictable and tunable nanoscale periodicities. We establish how molecular control over polymer composition programs the building block symmetries and regulates particle positioning, offering a route to well-ordered mixed mesostructures of high complexity.

Template-Free Synthesis and Selective Filling of Janus Nanocups.

We report on the formation of shape- and surface-anisotropic Janus nanocups (JNCs) by evaporation-induced confinement assembly (EICA) of ABC triblock terpolymers. During microphase separation in spherical confinement, the triblock terpolymer spontaneously adopted a hemispherical shape with an inner concentric lamella-lamella (ll) morphology. Cross-linking and disassembly of the microparticles resulted in well-defined JNCs with different chemistry on the inside and outside. By synthesizing polymers with increasing length of the cross-linkable block, we tuned the mechanical stability of the nanocups, which is relevant to control opening and closing of the cup cavity. We utilize the Janus properties for selective uptake of cargo exemplified by the filling of JNCs with polymer or gold nanoparticles. The directional properties of JNCs suggest applications in locomotion, oil-spill recovery, storage and release, templating, and as nanoreactors with attoliter volume.

Polymer Nanowires with Highly Precise Internal Morphology and Topography.

The construction of precise soft matter nanostructures in solution presents a challenge. A key focus remains on the rational design of functionalities to achieve the high morphological complexity typically found in biological systems. Advances in controlled polymerizations and self-assembly increasingly allow approaches toward complex hierarchical nanomaterials. By combining tailor-made cylindrical polymer brushes, block copolymers and interpolyelectrolyte complexation-driven self-assembly, we demonstrate a facile construction of uniformly compartmentalized and topographically structured polymeric nanowires in aqueous media. The approach offers a modular avenue in programming the internal morphology of polymer nanowires by varying the block copolymer composition and topology.

Self-Assembly of Diblock Molecular Polymer Brushes in the Spherical Confinement of Nanoemulsion Droplets.

Understanding the self-assembly behavior of polymers of various topologies is key to a reliable design of functional polymer materials. Self-assembly under confinement conditions emerges as a versatile avenue to design polymer particles with complex internal morphologies while simultaneously facilitating scale-up. However, only linear block copolymers have been studied to date, despite the increasing control over macromolecule composition and architecture available. This study extends the investigation of polymer self-assembly in confinement from regular diblock copolymers to diblock molecular polymer brushes (MPBs). Block-type MPBs with polystyrene (PS) and polylactide (PLA) compartments of different sizes are incorporated into surfactant-stabilized oil-in-water (chloroform/water) emulsions. The increasing confinement in the nanoemulsion droplets during solvent evaporation directs the MPBs to form solid nano/microparticles. Microscopy studies reveal an intricate internal particle structure, including interpenetrating networks and axially stacked lamellae of PS and PLA, depending on the PS/PLA ratio of the brushes.

Block Copolymer Micelles with Inverted Morphologies.

Beyond the crew cut: Highly asymmetric block copolymers self-assemble into microparticles with inverse morphologies far beyond the crew-cut regime. These particles enclose highly ordered channel systems with simple cubic, double diamond, and hexagonally packed hollow-hoop symmetry. The extensive interface and confinement of these particles could enable applications in the storage of cargo, templating, and chemical reactions.

Photoresponsive Block Copolymer Nanostructures through Implementation of Arylazopyrazoles.

Responsive nanomaterials that can undergo reversible changes in morphology are interesting for the development of functional materials that interact with and respond to their environment. Amphiphilic block copolymers are well-known for their ability to create a wide range of supramolecular nanostructures in solution. Arylazopyrazoles (AAPs) are versatile molecular photoswitches, which change their configuration and hydrophobicity upon irradiation with UV light (365 nm, Z isomer, less hydrophobic) and green light (520 nm, E isomer, more hydrophobic). In this work, photoswitchable block copolymers containing arylazopyrazole tetraethylene glycol methacrylate (AAPMA) and oligo(ethylene glycol) methacrylate (OEGMA) forming amphiphilic POEGMA-b-PAAPMA with varying block lengths are prepared by RAFT polymerization. The photochemical properties of AAP persist in the polymers. Due to their amphiphilic structure, the polymers self-assemble into supramolecular morphologies in water. Remarkably, photoisomerization results in a reversible change in the self-assembly behavior. Specifically, spherical and cylindrical micelles are observed for POEGMA33-b-PAAPMA47 when illuminated with green or UV light during assembly. Furthermore, the morphology of assembled structures can be reversibly switched by subsequent irradiation with UV and green light.

Fully Degradable Polyphosphoester Cubosomes for Sustainable Agrochemical Delivery.

Microplastic pollution and the urgent need for sustainable agriculture have raised interest in developing degradable carriers for controlled agrochemical release. Porous polymeric particles are particularly promising due to their unique release profiles compared to solid or core-shell carriers. However, creating degradable, mesoporous (2-50 nm) microparticles is challenging, and their potential for agrochemical delivery is largely unexplored. A straightforward self-assembly method is demonstrated for fully degradable porous polymer cubosomes (PCs), showcasing their ability to load and release agrochemicals. Using fully degradable block copolymers (BCPs), poly(ethyl ethylene phosphate)-b-polylactide (PEEP-b-PLA), PCs are synthesized in water with high inner order and open pores averaging 19 ± 3 nm in diameter. During the self-assembly process in the presence of the hydrophobic fungicide tebuconazole, polymersomes transform into PCs by enriching the hydrophobic polymer domain and altering the BCP packing parameter. After self-assemby, highly porous and fungicide-loaded PCs are obtained. Fungicide-loaded PCs show high antimycotic activity against Botrytis cinerea (grey mold), adhere to Vitis vinifera Riesling leaves even after simulated rain, and release the fungicide continuously over several days with different release-kinetics compared to solid particles. PCs hydrolyze completely into lactic acid and phosphate derivatives, highlighting their potential as microplastic-free agrochemical delivery systems for sustainable agriculture.