RESUMEN
Bone reconstruction remains an important challenge today in several clinical situations, notably regarding the control of the competition occurring during proliferation of osteoblasts and fibroblasts. Polystyrene and polylactide are reference materials in the biomedical field. Therefore, it could be expected from the literature that clear correlations have been already established between the behavior of fibroblasts or osteoblasts and the surface characteristics of these materials. After an extensive analysis of the literature, although general trends could be established, our critical review has highlighted the need to develop a more in-depth analysis of the surface properties of these materials. Moreover, the large variation noticed in the experimental conditions used for in vitro animal cell studies impairs comparison between studies. From our comprehensive review on this topic, we have suggested several parameters that would be valuable to standardize to integrate the data from the literature and improve our knowledge on the cell-material interactions.
Asunto(s)
Osteoblastos , Poliestirenos , Animales , Línea Celular , Proliferación Celular , Fibroblastos , Poliésteres , Propiedades de SuperficieRESUMEN
Self-stabilizing biodegradable microcarriers were produced via an oil/water solvent evaporation technique using amphiphilic chitosan-g-polyester copolymers as a core material in oil phase without the addition of any emulsifier in aqueous phase. The total yield of the copolymer-based microparticles reached up to 79 wt. %, which is comparable to a yield achievable using traditional emulsifiers. The kinetics of microparticle self-stabilization, monitored during their process, were correlated to the migration of hydrophilic copolymer's moieties to the oil/water interface. With a favorable surface/volume ratio and the presence of bioadhesive natural fragments anchored to their surface, the performance of these novel microcarriers has been highlighted by evaluating cell morphology and proliferation within a week of cell cultivation in vitro.
Asunto(s)
Materiales Biocompatibles/química , Quitosano/química , Microesferas , Poliésteres/química , Polímeros/química , Fibroblastos , Ingeniería de TejidosRESUMEN
The adaptation of existing antimalarial nanocarriers to new Plasmodium stages, drugs, targeting molecules, or encapsulating structures is a strategy that can provide new nanotechnology-based, cost-efficient therapies against malaria. We have explored the modification of different liposome prototypes that had been developed in our group for the targeted delivery of antimalarial drugs to Plasmodium-infected red blood cells (pRBCs). These new models include: (i) immunoliposome-mediated release of new lipid-based antimalarials; (ii) liposomes targeted to pRBCs with covalently linked heparin to reduce anticoagulation risks; (iii) adaptation of heparin to pRBC targeting of chitosan nanoparticles; (iv) use of heparin for the targeting of Plasmodium stages in the mosquito vector; and (v) use of the non-anticoagulant glycosaminoglycan chondroitin 4-sulfate as a heparin surrogate for pRBC targeting. The results presented indicate that the tuning of existing nanovessels to new malaria-related targets is a valid low-cost alternative to the de novo development of targeted nanosystems.
Asunto(s)
Antimaláricos/administración & dosificación , Sistemas de Liberación de Medicamentos , Animales , Sulfatos de Condroitina/uso terapéutico , Humanos , Liposomas , Malaria/tratamiento farmacológico , Ratones , Nanopartículas/administración & dosificaciónRESUMEN
Targeted delivery of drugs across endothelial barriers remains a formidable challenge, especially in the case of the brain, where the blood-brain barrier severely limits entry of drugs into the central nervous system. Nanoparticle-mediated transport of peptide/protein-based drugs across endothelial barriers shows great potential as a therapeutic strategy in a wide variety of diseases. Functionalizing nanoparticles with peptides allows for more efficient targeting to specific organs. We have evaluated the hemocompatibilty, cytotoxicity, endothelial uptake, efficacy of delivery and safety of liposome, hyperbranched polyester, poly(glycidol) and acrylamide-based nanoparticles functionalized with peptides targeting brain endothelial receptors, in vitro and in vivo. We used an ELISA-based method for the detection of nanoparticles in biological fluids, investigating the blood clearance rate and in vivo biodistribution of labeled nanoparticles in the brain after intravenous injection in Wistar rats. Herein, we provide a detailed report of in vitro and in vivo observations.
Asunto(s)
Encéfalo/metabolismo , Sistemas de Liberación de Medicamentos , Liposomas/metabolismo , Nanopartículas/metabolismo , Péptidos/metabolismo , Secuencia de Aminoácidos , Animales , Transporte Biológico , Barrera Hematoencefálica/metabolismo , Línea Celular , Portadores de Fármacos , Humanos , Liposomas/análisis , Liposomas/farmacocinética , Masculino , Nanopartículas/análisis , Péptidos/análisis , Péptidos/farmacocinética , Ratas Wistar , Distribución TisularRESUMEN
The objective of this study is to evaluate the cell viability and hemocompatibility of starch-based hydrogels for maxillofacial bone regeneration. Seven starch-based hydrogels were prepared: three loaded with 0.5, 1 and 2% calcium carbonate (Sigma Aldrich, St. Louis, MO, USA); three loaded with 2, 3 and 4% hydroxyapatite (Sigma Aldrich); and one not loaded as a control. A 10 M NaOH was then added to induce hydrogel formation. Human osteoblasts were cultured on each hydrogel for 72 h. An MTS assay (Cell Titer96; PROMEGA, Madison, WI, USA) was used to assess cell viability. Hemocompatibility testing was conducted with normal human blood in the following conditions: 100 mg of each hydrogel in contact with 900 µL of whole blood for 15 min at 37 °C under lateral stirring. Higher percentages of cell viability were observed in starch-based hydrogels loaded with hydroxyapatite as compared with the control. The hemolysis test showed a hemolysis level lower than 2%. Activated partial thromboplastin time and prothrombin time were unchanged, while platelet counting showed a slight decrease when compared with controls.
Asunto(s)
Materiales Biocompatibles/farmacología , Regeneración Ósea/efectos de los fármacos , Carbonato de Calcio/farmacología , Supervivencia Celular/efectos de los fármacos , Durapatita/farmacología , Hidrogeles/farmacología , Ensayo de Materiales , Osteoblastos/efectos de los fármacos , Almidón/farmacología , Recuento de Células Sanguíneas , Células Cultivadas , Hemólisis , Humanos , Tiempo de Tromboplastina Parcial , Tiempo de ProtrombinaRESUMEN
Hyaluronan is a major component of the extracellular matrix and glycocalyx. Its main somatic degrading enzymes are hyaluronidases 1 and 2, neither of which is active in the bloodstream. We generated hyaluronidase 2-deficient mice. These animals suffer from chronic, mild anemia and thrombocytopenia, in parallel with a 10-fold increase in plasma hyaluronan concentration. In this study we explored the mechanism of these hematologic anomalies. The decreased erythrocyte and platelet counts were attributed to peripheral consumption. The erythrocyte half-life was reduced from 25 to 8 days without signs of premature aging. Hyaluronidase 2-deficient platelets were functional. Major intrinsic defects in erythrocyte membrane or stability, as well as detrimental effects of high hyaluronan levels on erythrocytes, were ruled out in vitro. Normal erythrocytes transfused into hyaluronidase 2-deficient mice were quickly destroyed but neither splenectomy nor anti-C5 administration prevented chronic hemolysis. Schistocytes were present in blood smears from hyaluronidase 2-deficient mice at a level of 1% to 6%, while virtually absent in control mice. Hyaluronidase 2-deficient mice had increased markers of endothelial damage and microvascular fibrin deposition, without renal failure, accumulation of ultra-large multimers of von Willebrand factor, deficiency of A Disintegrin And Metalloproteinase with ThromboSpondin type 1 motifs, member 13 (ADAMTS13), or hypertension. There was no sign of structural damage in hepatic or splenic sinusoids, or in any other microvessels. We conclude that hyaluronidase 2 deficiency induces chronic thrombotic microangiopathy with hemolytic anemia in mice. The link between this uncommon condition and hyaluronidase 2 remains to be explored in humans.
Asunto(s)
Hialuronoglucosaminidasa/deficiencia , Microangiopatías Trombóticas/genética , Proteína ADAMTS13 , Anemia Macrocítica/sangre , Anemia Macrocítica/genética , Animales , Viscosidad Sanguínea/genética , Trasplante de Médula Ósea , Supervivencia Celular/genética , Senescencia Celular/genética , Modelos Animales de Enfermedad , Índices de Eritrocitos , Transfusión de Eritrocitos , Eritrocitos/citología , Eritrocitos/metabolismo , Eritrocitos Anormales/metabolismo , Proteínas Ligadas a GPI/deficiencia , Ácido Hialurónico/sangre , Riñón/metabolismo , Riñón/patología , Riñón/fisiopatología , Metaloendopeptidasas/metabolismo , Ratones , Ratones Noqueados , Trombocitopenia/sangre , Trombocitopenia/genética , Microangiopatías Trombóticas/diagnóstico , Microangiopatías Trombóticas/terapiaRESUMEN
Heparin had been demonstrated to have antimalarial activity and specific binding affinity for Plasmodium-infected red blood cells (pRBCs) vs. non-infected erythrocytes. Here we have explored if both properties could be joined into a drug delivery strategy where heparin would have a dual role as antimalarial and as a targeting element of drug-loaded nanoparticles. Confocal fluorescence and transmission electron microscopy data show that after 30 min of being added to living pRBCs fluorescein-labeled heparin colocalizes with the intracellular parasites. Heparin electrostatically adsorbed onto positively charged liposomes containing the cationic lipid 1,2-dioleoyl-3-trimethylammonium-propane and loaded with the antimalarial drug primaquine was capable of increasing three-fold the activity of encapsulated drug in Plasmodium falciparum cultures. At concentrations below those inducing anticoagulation of mouse blood in vivo, parasiticidal activity was found to be the additive result of the separate activities of free heparin as antimalarial and of liposome-bound heparin as targeting element for encapsulated primaquine. FROM THE CLINICAL EDITOR: Malaria remains an enormous global public health concern. In this study, a novel functionalized heparin formulation used as drug delivery agent for primaquine was demonstrated to result in threefold increased drug activity in cell cultures, and in a murine model it was able to provide these benefits in concentrations below what would be required for anticoagulation. Further studies are needed determine if this approach is applicable in the human disease as well.
Asunto(s)
Antimaláricos/química , Antimaláricos/uso terapéutico , Eritrocitos/parasitología , Heparina/química , Heparina/uso terapéutico , Liposomas/química , Plasmodium falciparum/patogenicidad , Células Cultivadas , Sistemas de Liberación de Medicamentos , Humanos , Microscopía Electrónica de TransmisiónRESUMEN
Preclinical Research Analgesics with different mechanisms of action can be combined in order to obtain pharmacological synergism, employing lower doses of each agent, thus diminishing side effects. For instance, an atypical dual analgesic such as tramadol (TMD) and a nonsteroidal anti-inflammatory drug such as ibuprofen (IBU) are good candidates to be evaluated when combined and applied peripherally. The present study was conducted to evaluate possible local synergism between TMD and IBU when combined peripherally using the formalin test in rats. The effects of the individual analgesics and their combinations were evaluated simultaneously using a 5% formalin dilution. Dose-effect curves were determined for TMD (50-400 µg/paw) and IBU (1-100 µg/paw). Experimental effective doses were evaluated and isobolographic analyses were constructed to evaluate TMD-IBU combination synergism. Both drugs produced a dose-dependent analgesic effect when applied separately. Isobolographic analysis showed synergism during phase 1 (0-10 min) and phase 2 (15-60 min) when compared with theoretical doses (P < 0.05), with interaction indexes of 0.06 and 0.09, respectively. The present information supports the peripheral analgesic effect of TMD and IBU, especially when combined at appropriate doses.
Asunto(s)
Analgésicos/uso terapéutico , Ibuprofeno/uso terapéutico , Dolor/tratamiento farmacológico , Tramadol/uso terapéutico , Analgésicos/administración & dosificación , Animales , Relación Dosis-Respuesta a Droga , Combinación de Medicamentos , Sinergismo Farmacológico , Formaldehído , Ibuprofeno/administración & dosificación , Masculino , Dolor/inducido químicamente , Ratas , Ratas Wistar , Tramadol/administración & dosificaciónRESUMEN
The study investigates the rheological properties and protein release capacity of a uniform hydrogel composed of sodium alginate (SA) and poloxamer (P407). The hydrogel is prepared through the sustained release of calcium ions, resulting in a reinforced and homogeneous interpenetrating networks (IPNs) of SA and P407 polymeric chains. By adjusting the amount of crosslink agent, the hydrogel exhibites an adjustable dissolution ratio and adaptable gelling time. Moreover, the composite showed a well-structured network and superior mechanical strength, enabling the sustained release of both calcium ions and Soybean Trypsin Inhibitor (STI) protein, a model of Bone Morphogenic Protein (BMP). Importantly, the protein release kinetic can be tuned based on the SA content in the polymeric blend, highlighting the versatile nature of this hydrogel for drug delivery purposes.
Asunto(s)
Alginatos , Calcio , Preparaciones de Acción Retardada/farmacología , Alginatos/farmacología , Hidrogeles/farmacología , Polímeros , Estabilidad Proteica , IonesRESUMEN
Given the growing importance of drug and gene delivery systems, imaging agents, biosensors, and theranostics, there is a need to develop new multifunctional and biocompatible platforms. Here we synthesized and fully characterized a family of novel multifunctional and completely monodisperse dendritic platforms. Our synthetic methodology, based on compatible protecting groups and the attachment of monodisperse triethylene glycol units, allows the control of the generation and differentiation of terminal groups, thus giving rise to multifunctional and perfectly-defined products. A family of dendrons was synthesized and four distinct dendritic structures were chosen from the family in order to determine the effect of the generation and surface groups on their biocompatibility. The stability in serum, cytotoxicity, and hemocompatibility of these products were studied. Our results indicate that these non-toxic, hemocompatible, non-immunogenic, stable and versatile scaffolds may be very interesting candidates for biomedical applications.
Asunto(s)
Antineoplásicos/farmacología , Materiales Biocompatibles/farmacología , Investigación Biomédica , Dendrímeros/farmacología , Polietilenglicoles/farmacología , Antineoplásicos/síntesis química , Antineoplásicos/química , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Dendrímeros/síntesis química , Dendrímeros/química , Relación Dosis-Respuesta a Droga , Ensayos de Selección de Medicamentos Antitumorales , Células HT29 , Humanos , Estructura Molecular , Polietilenglicoles/síntesis química , Polietilenglicoles/química , Relación Estructura-Actividad , Células Tumorales CultivadasRESUMEN
In this study, the novel exopolysaccharide (EPS) produced by the marine bacterium Alteromonas macleodii Mo 169 was used as a stabilizer and capping agent in the preparation of selenium nanoparticles (SeNPs). The synthesized nanoparticles were well dispersed and spherical with an average particle size of 32 nm. The cytotoxicity of the EPS and the EPS/SeNPs bio-nanocomposite was investigated on human keratinocyte (HaCaT) and fibroblast (CCD-1079Sk) cell lines. No cytotoxicity was found for the EPS alone for concentrations up to 1 g L-1. A cytotoxic effect was only noticed for the bio-nanocomposite at the highest concentrations tested (0.5 and 1 g L-1). In vitro experiments demonstrated that non-cytotoxic concentrations of the EPS/SeNPs bio-nanocomposite had a significant cellular antioxidant effect on the HaCaT cell line by reducing ROS levels up to 33.8%. These findings demonstrated that the A. macleodii Mo 169 EPS can be efficiently used as a stabilizer and surface coating to produce a SeNP-based bio-nanocomposite with improved antioxidant activity.
RESUMEN
Poly(2-dimethylamino-ethylmethacrylate) (PDMAEMA) is a cationic polymer when dissolved in a 7.4 pH fluid. Owing to its ionic nature, this polycation interacts with the negatively charged cell membrane surface of red blood cells (RBCs). The electrostatic self-assembly of PDMAEMA on RBCs membrane can be employed for inducing the formation of a polymeric shield camouflaging blood group antigens on RBCs as a valuable strategy for developing "universal RBCs" for blood transfusion. The purpose of this research was to evaluate the camouflaging ability of PDMAEMA homopolymers and PDMAEMA-co-poly(ethylene glycol) copolymers differing in molecular weight and architecture. Surprisingly, the PDMAEMAs caused a partially masking, no masking, and sensitization of the same RBCs population. The MW and architecture of the polymers as well as temperature of PDMAEMA-RBCs treatment influenced the results observed. Herein, the very particular reactivity of PDMAEMAs and RBCs is analyzed and discussed.
Asunto(s)
Antígenos de Grupos Sanguíneos/química , Materiales Biocompatibles Revestidos/química , Eritrocitos/química , Metacrilatos/química , Nylons/química , Antígenos de Grupos Sanguíneos/inmunología , Materiales Biocompatibles Revestidos/síntesis química , Eritrocitos/inmunología , Fluorescencia , Humanos , Metacrilatos/síntesis química , Nylons/síntesis química , Propiedades de SuperficieRESUMEN
In this study, membrane-based methods were evaluated for the recovery of FucoPol, the fucose-rich exopolysaccharide (EPS) secreted by the bacterium Enterobacter A47, aiming at reducing the total water consumption and extraction time, while keeping a high product recovery, thus making the downstream procedure more sustainable and cost-effective. The optimized method involved ultrafiltration of the cell-free supernatant using a 30 kDa molecular weight cut-off (MWCO) membrane that allowed for a 37% reduction of the total water consumption and a 55% reduction of the extraction time, compared to the previously used method (diafiltration-ultrafiltration with a 100 kDa MWCO membrane). This change in the downstream procedure improved the product's recovery (around 10% increase) and its purity, evidenced by the lower protein (8.2 wt%) and inorganic salts (4.0 wt%) contents of the samples (compared to 9.3 and 8.6 wt%, respectively, for the previously used method), without impacting FucoPol's sugar and acyl groups composition, molecular mass distribution or thermal degradation profile. The biopolymer's emulsion-forming and stabilizing capacity was also not affected (emulsification activity (EA) with olive oil, at a 2:3 ratio, of 98 ± 0% for all samples), while the rheological properties were improved (the zero-shear viscosity increased from 8.89 ± 0.62 Pa·s to 17.40 ± 0.04 Pa·s), which can be assigned to the higher purity degree of the extracted samples. These findings demonstrate a significant improvement in the downstream procedure raising FucoPol's recovery, while reducing water consumption and operation time, key criteria in terms of process economic and environmental sustainability. Moreover, those changes improved the biopolymer's rheological properties, known to significantly impact FucoPol's utilization in cosmetic, pharmaceutical or food products.
RESUMEN
Tissue engineering and cell therapy are very attractive in terms of potential applications but remain quite challenging regarding the clinical aspects. Amongst the different strategies proposed to facilitate their implementation in clinical practices, biodegradable microparticles have shown promising outcomes with several advantages and potentialities. This critical review aims to establish a survey of the most relevant materials and processing techniques to prepare these micro vehicles. Special attention will be paid to their main potential applications, considering the regulatory constraints and the relative easiness to implement their production at an industrial level to better evaluate their application in clinical practices.
RESUMEN
Large quantities of waste biomass are generated annually worldwide by many industries and are vastly underutilized. However, these wastes contain sugars and other dissolved organic matter and therefore can be exploited to produce microbial biopolymers. In this study, four selected Halomonas strains, namely, Halomonas caseinilytica K1, Halomonas elongata K4, Halomonas smyrnensis S3, and Halomonas halophila S4, were investigated for the production of exopolysaccharides (EPS) using low-cost agro-industrial wastes as the sole carbon source: cheese whey, grape pomace, and glycerol. Interestingly, both yield and monosaccharide composition of EPS were affected by the carbon source. Glucose, mannose, galactose, and rhamnose were the predominant monomers, but their relative molar ratio was different. Similarly, the average molecular weight of the synthesized EPS was affected, ranging from 54.5 to 4480 kDa. The highest EPS concentration (446 mg/L) was obtained for H. caseinilytica K1 grown on cheese whey that produced an EPS composed mostly of galactose, rhamnose, glucose, and mannose, with lower contents of galacturonic acid, ribose, and arabinose and with a molecular weight of 54.5 kDa. Henceforth, the ability of Halomonas strains to use cost-effective substrates, especially cheese whey, is a promising approach for the production of EPS with distinct physicochemical properties suitable for various applications.
Asunto(s)
Halomonas , Residuos Industriales , Peso Molecular , Monosacáridos , Polisacáridos Bacterianos/químicaRESUMEN
Biosurfactants synthesized by microorganisms represent safe and sustainable alternatives to the use of synthetic surfactants, due to their lower toxicity, better biodegradability and biocompatibility, and their production from low-cost feedstocks. In line with this, the present study describes the physical, chemical, and functional characterization of the biopolymer secreted by the bacterium Burkholderia thailandensis DSM 13276, envisaging its validation as a biosurfactant. The biopolymer was found to be a glycolipopeptide with carbohydrate and protein contents of 33.1 ± 6.4% and 23.0 ± 3.2%, respectively. Galactose, glucose, rhamnose, mannose, and glucuronic acid were detected in the carbohydrate moiety at a relative molar ratio of 4:3:2:2:1. It is a high-molecular-weight biopolymer (1.0 × 107 Da) with low polydispersity (1.66), and forms aqueous solutions with shear-thinning behavior, which remained after autoclaving. The biopolymer has demonstrated a good emulsion-stabilizing capacity towards different hydrophobic compounds, namely, benzene, almond oil, and sunflower oil. The emulsions prepared with the biosurfactant, as well as with its autoclaved solution, displayed high emulsification activity (>90% and ~50%, respectively). Moreover, the almond and sunflower oil emulsions stabilized with the biosurfactant were stable for up to 4 weeks, which further supports the potential of this novel biopolymer for utilization as a natural bioemulsifier.
RESUMEN
Polyhydroxyalkanoate (PHA) recovery from microbial cells relies on either solvent extraction (usually using halogenated solvents) and/or digestion of the non-PHA cell mass (NPCM) by the action of chemicals (e.g., hypochlorite) that raise environmental and health hazards. A greener alternative for PHA recovery, subcritical water (SBW), was evaluated as a method for the dissolution of the NPCM of a mixed microbial culture (MMC) biomass. A temperature of 150 °C was found as a compromise to reach NPCM solubilization while mostly preventing the degradation of the biopolymer during the procedure. Such conditions yielded a polymer with a purity of 77%. PHA purity was further improved by combining the SBW treatment with hypochlorite digestion, in which a significantly lower hypochlorite concentration (0.1%, v/v) was sufficient to achieve an overall polymer purity of 80%. During the procedure, the biopolymer suffered some depolymerization, as evidenced by the lower molecular weight (Mw) and higher polydispersity of the extracted samples. Although such changes in the biopolymer's molecular mass distribution impact its mechanical properties, impairing its utilization in most conventional plastic uses, the obtained PHA can find use in several applications, for example as additives or for the preparation of graft or block co-polymers, in which low-Mw oligomers are sought.
RESUMEN
Polyhydroxyalkanoates (PHA) are biopolymers with potential to replace conventional oil-based plastics. However, PHA high production costs limit their scope of commercial applications. Downstream processing is currently the major cost factor for PHA production but one of the least investigated aspects of the PHA production chain. In this study, the extraction of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced at pilot scale by a mixed microbial culture was performed using sodium hydroxide (NaOH) or sodium hypochlorite (NaClO) as digestion agents of non-PHA cellular mass. Optimal conditions for digestion with NaOH (0.3 M, 4.8 h) and NaClO (9.0%, 3.4 h) resulted in polymers with a PHA purity and recovery of ca. 100%, in the case of the former and ca. 99% and 90%, respectively, in the case of the latter. These methods presented higher PHA recoveries than extraction by soxhlet with chloroform, the benchmark protocol for PHA extraction. The polymers extracted by the three methods presented similar PHA purities, molecular weights and polydispersity indices. Using the optimized conditions for NaOH and NaClO digestions, this study analyzed the effect of the initial intracellular PHA content (40-70%), biomass concentration (20-100 g/L) and biomass pre-treatment (fresh vs. dried vs. lyophilized) on the performance of PHA extraction by these two methods.
RESUMEN
Poly(hydroxyalkanoates) (PHAs) with different material properties, namely, the homopolymer poly(3-hydroxybutyrate), P(3HB), and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate, P(3HB-co-3HV), with a 3HV of 25 wt.%, were used for the preparation of porous biopolymeric scaffolds. Solvent casting with particulate leaching (SCPL) and emulsion templating were evaluated to process these biopolymers in porous scaffolds. SCPL scaffolds were highly hydrophilic (>170% swelling in water) but fragile, probably due to the increase of the polymer's polydispersity index and its high porosity (>50%). In contrast, the emulsion templating technique resulted in scaffolds with a good compromise between porosity (27-49% porosity) and hydrophilicity (>30% water swelling) and without impairing their mechanical properties (3.18-3.35 MPa tensile strength and 0.07-0.11 MPa Young's Modulus). These specifications are in the same range compared to other polymer-based scaffolds developed for tissue engineering. P(3HB-co-3HV) displayed the best overall properties, namely, lower crystallinity (11.3%) and higher flexibility (14.8% elongation at break. Our findings highlight the potency of our natural biopolyesters for the future development of novel porous scaffolds in tissue engineering, thanks also to their safety and biodegradability.
RESUMEN
Biodegradable polymeric microparticles are widely used in drug delivery systems with prolonged-release profiles and/or cell microcarriers. Their fabrication via the oil/water emulsion solvent evaporation technique has normally required emulsifiers in the aqueous phase. The present work aims to evaluate the effectiveness of various polysaccharides, such as chitosan, hyaluronic acid, cellulose, arabinogalactan, guar and their derivatives, as an alternative to synthetic surfactants for polylactide microparticle stabilization during their fabrication. Targeted modification of the biopolymer's chemical structure was also tested as a tool to enhance polysaccharides' emulsifying ability. The transformation of biomacromolecules into a form of nanoparticle via bottom-up or top-down methods and their subsequent application for microparticle fabrication via the Pickering emulsion solvent evaporation technique was useful as a one-step approach towards the preparation of core/shell microparticles. The effect of polysaccharides' chemical structure and the form of their application on the polylactide microparticles' total yield, size distribution and morphology was evaluated. The application of polysaccharides has great potential in terms of the development of green chemistry and the biocompatibility of the formed microparticles, which is especially important in biomedicine application.