RESUMEN
Macroscopic electric motors continue to have a large impact on almost every aspect of modern society. Consequently, the effort towards developing molecular motors1-3 that can be driven by electricity could not be more timely. Here we describe an electric molecular motor based on a [3]catenane4,5, in which two cyclobis(paraquat-p-phenylene)6 (CBPQT4+) rings are powered by electricity in solution to circumrotate unidirectionally around a 50-membered loop. The constitution of the loop ensures that both rings undergo highly (85%) unidirectional movement under the guidance of a flashing energy ratchet7,8, whereas the interactions between the two rings give rise to a two-dimensional potential energy surface (PES) similar to that shown by FOF1 ATP synthase9. The unidirectionality is powered by an oscillating10 voltage11,12 or external modulation of the redox potential13. Initially, we focused our attention on the homologous [2]catenane, only to find that the kinetic asymmetry was insufficient to support unidirectional movement of the sole ring. Accordingly, we incorporated a second CBPQT4+ ring to provide further symmetry breaking by interactions between the two mobile rings. This demonstration of electrically driven continual circumrotatory motion of two rings around a loop in a [3]catenane is free from the production of waste products and represents an important step towards surface-bound14 electric molecular motors.
RESUMEN
BACKGROUND: IFIH1 variants have been reported to be associated with immune-related disorders with/without seizures. It is unknown whether IFIH1 variants are associated with common epilepsy without acquired causes and the mechanism underlying phenotypic variation remains elusive. METHODS: Trio-based whole-exome sequencing was performed on patients with febrile seizures or epilepsy with antecedent febrile seizures. Previously reported variants were systematically reviewed to investigate genotype-phenotype associations. RESULTS: Two de novo heterozygous and three biallelic missense variants were identified in five patients with generalised epilepsy with antecedent febrile seizures. The variants were predicted to be damaging by in silico tools and were associated with hydrogen bonding changes to neighbouring amino acids or decreased protein stability. Patients exhibited an early onset age and became seizure-free with favourable outcome. Further analysis revealed that de novo missense variants located in the Hel region resulted in seizures with multiple neurological abnormalities, while those in the pincer domain or C-terminal domain led to seizures with normal neurodevelopment, suggesting a sub-molecular effect. Biallelic missense variants, which were inherited from unaffected parents and presented low allele frequencies in general populations, were associated with seizures without neurological abnormalities. Truncation variants were related to refractory epilepsy and severe developmental delay, suggesting a genotype-phenotype correlation. IFIH1 is predominantly expressed in the neonatal stage and decreases dramatically in the adulthood, which is consistent with the early onset age and favourable outcome of the patients. CONCLUSIONS: IFIH1 variants are potentially associated with generalised epilepsy with antecedent febrile seizures. The sub-molecular implication and genotype-phenotype association help explain phenotype variations of IFIH1 variants.
Asunto(s)
Epilepsia Generalizada , Secuenciación del Exoma , Estudios de Asociación Genética , Helicasa Inducida por Interferón IFIH1 , Mutación Missense , Convulsiones Febriles , Humanos , Convulsiones Febriles/genética , Epilepsia Generalizada/genética , Masculino , Femenino , Helicasa Inducida por Interferón IFIH1/genética , Mutación Missense/genética , Preescolar , Lactante , Niño , Predisposición Genética a la Enfermedad , Adulto , FenotipoRESUMEN
Although catenanes comprising two ring-shaped components can be made in large quantities by templation, the preparation of three-dimensional (3D) catenanes with cage-shaped components is still in its infancy. Here, we report the design and syntheses of two 3D catenanes by a sequence of SN2 reactions in one pot. The resulting triply mechanically interlocked molecules were fully characterized in both the solution and solid states. Mechanistic studies have revealed that a suit[3]ane, which contains a threefold symmetric cage component as the suit and a tribromide component as the body, is formed at elevated temperatures. This suit[3]ane was identified as the key reactive intermediate for the selective formation of the two 3D catenanes which do not represent thermodynamic minima. We foresee a future in which this particular synthetic strategy guides the rational design and production of mechanically interlocked molecules under kinetic control.
Asunto(s)
Catenanos , Rotaxanos , Catenanos/química , Cinética , Rotaxanos/químicaRESUMEN
The development of architecturally unique molecular nanocarbons by bottom-up organic synthesis is essential for accessing functional organic materials awaiting technological developments in fields such as energy, electronics, and biomedicine. Herein, we describe the design and synthesis of a triptycene-based three-dimensional (3D) nanocarbon, GFN-1, with geometrical flexibility on account of its three peripheral π-panels being capable of interconverting between two curved conformations. An effective through-space electronic communication among the three π-panels of GFN-1 has been observed in its monocationic radical form, which exhibits an extensively delocalized spin density over the entire 3D π-system as revealed by electron paramagnetic resonance and UV-vis-NIR spectroscopies. The flexible 3D molecular architecture of GFN-1, along with its densely packed superstructures in the presence of fullerenes, is revealed by microcrystal electron diffraction and single-crystal X-ray diffraction, which establish the coexistence of both propeller and tweezer conformations in the solid state. GFN-1 exhibits strong binding affinities for fullerenes, leading to host-guest complexes that display rapid photoinduced electron transfer within a picosecond. The outcomes of this research could pave the way for the utilization of shape and electronically complementary nanocarbons in the construction of functional coassemblies.
RESUMEN
Although our knowledge and understanding of adsorptions in natural and artificial systems has increased dramatically during the past century, adsorption associated with nonporous polymers remains something of a mystery, hampering applications. Here we demonstrate a model system for adaptisorption of nonporous polymers, wherein dative B-N bonds and host-guest binding units act as the kinetic and thermodynamic components, respectively. The coupling of these two components enables nonporous polymer crystals to adsorb molecules from solution and undergo recrystallization as thermodynamically favored crystals. Adaptisorption of nonporous polymer crystals not only extends the types of adsorption in which the sorbate molecules are integrated in a precise and orderly manner in the sorbent systems, but also provides a facile and accurate approach to the construction of polymeric materials with precise architectures and integrated functions.
RESUMEN
With the prosperity of the development of carbon nanorings, certain topologically or functionally unique units-embedded carbon nanorings have sprung up in the past decade. Herein, we report the facile and efficient synthesis of three cyclooctatetraene-embedded carbon nanorings (COTCNRs) that contain three (COTCNR1 and COTCNR2) and four (COTCNR3) COT units in a one-pot Yamamoto coupling. These nanorings feature hoop-shaped segments of Gyroid (G-), Diamond (D-), and Primitive (P-) type carbon schwarzites. The conformations of the trimeric nanorings COTCNR1 and COTCNR2 are shape-persistent, whereas the tetrameric COTCNR3 possesses a flexible carbon skeleton which undergoes conformational changes upon forming host-guest complexes with fullerenes (C60 and C70), whose co-crystals may potentially serve as fullerene-based semiconducting supramolecular wires with electrical conductivities on the order of 10-7â S cm-1 (for C60âCOTCNR3) and 10-8â S cm-1 (for C70âCOTCNR3) under ambient conditions. This research not only describes highly efficient one-step syntheses of three cyclooctatetraene-embedded carbon nanorings which feature hoop-shaped segments of distinctive topological carbon schwarzites, but also demonstrates the potential application in electronics of the one-dimensional fullerene arrays secured by COTCNR3.
RESUMEN
The novel selenoviologen-based tetracationic cyclophanes (green boxes 3 and 5) with rigid electron-deficient cavities are synthesized via SN2 reactions in two steps. The green boxes exhibit good redox properties, narrow energy gaps, and strong absorption in the visible range (370-470 nm), especially for the green box 5 containing two selenoviologen (SeV2+) units. Meanwhile, the femtosecond transient absorption (fs-TA) reveals that the green boxes have a stabilized dicationic biradical, high efficiency of intramolecular charge transfer (ICT), and long-lived charge separation state due to the formation of cyclophane structure. Based on the excellent photophysical and redox properties, the green boxes are applied to electrochromic devices (ECDs) and visible-light-driven hydrogen production with a high H2 generation rate (34 µmol/h), turnover number (203), and apparent quantum yield (5.33 × 10-2). In addition, the host-guest recognitions are demonstrated between the green boxes and electron-rich guests (e.g., G1:1-naphthol and G2:platinum(II)-tethered naphthalene) in MeCN through C-H···π and π···π interactions. As a one-component system, the host-guest complexes of green boxâG2 are successfully applied to visible-light photocatalytic hydrogen production due to the intramolecular electron transfer (IET) between platinum(II) of G2 and SeV2+ of the green box, which provides a simplified system for solar energy conversion.
RESUMEN
Single-crystal-to-single-crystal (SCSC) polymerization offers an effective protocol for the environmentally friendly preparation of polymer single crystals (PSCs) with extremely high crystallinity and very large molecular weights. Single-crystal X-ray diffraction (SCXRD) serves as a powerful technique for the in-depth characterization of their structures at a molecular level. Hence, a fundamental understanding of the structure-property relationships of PSCs is within our reach. Most of the reported PSCs, however, suffer from poor solubility, a property which hampers their post-functionalization and solution processability when it comes to practical applications. Here, we report soluble and processable PSCs with rigid polycationic backbones by taking advantage of an ultraviolet-induced topochemical polymerization from an elaborately designed monomer that results in a multitude of photoinduced [2 + 2] cycloadditions. The high crystallinity and excellent solubility of the resulting polymeric crystals enable their characterization both in the solid state by X-ray crystallography and electron microscopy and in the solution phase by NMR spectroscopy. The topochemical polymerization follows first-order reaction kinetics to a first approximation. Post-functionalization of the PSCs by anion exchange renders them super-hydrophobic materials for water purification. Solution processability endows PSCs with excellent gel-like rheological properties. This research represents a major step towards the controlled synthesis and full characterization of soluble single-crystalline polymers, which may find application in the fabrication of PSCs with many different functions.
RESUMEN
Three novel D-π-π-A prototype compounds, namely, (E)-2-(3-([1,1'-biphenyl]-2-yl)-1-(9H-fluoren-2-yl)allylidene)malononitri-le (2-BAM), (E)-2-(3-([1,1'-biphenyl]-3-yl)-1-(9H-fluoren-2-yl)allylidene)malononitri-le (3-BAM), and (E)-2-(3-([1,1'-biphenyl]-4-yl)-1-(9H-fluoren-2-yl)allylidene)malononitri-le (4-BAM) were synthesized. Furthermore, the structures and photophysical properties of three compounds were compared. Molecules of 2-BAM were packed into a 1D column structure with H-aggregation. However, both of 3-BAM and 4-BAM were packed into 3D layer structures with J-aggregation, respectively. Although all three compounds showed highly twisted molecular geometries, their respective molecular packing and intermolecular interactions were different. Because of the differences in electronic structures of molecules, three compounds displayed different emission behaviors in solid and dilute solution states. This study indicated that changing the position of biphenyl groups is an effective way for turning the structures and photophysical properties of such D-π-π-A prototype fluorescent materials.
RESUMEN
The development of synthetic receptors that recognize carbohydrates in water with high selectivity and specificity is challenging on account of their structural complexity and strong hydrophilicity. Here, we report on the design and synthesis of two pyrene-based, temple-shaped receptors for the recognition of a range of common sugars in water. These receptors rely on the use of two parallel pyrene panels, which serve as roofs and floors, capable of forming multiple [C-H···π] interactions with the axially oriented C-H bonds on glycopyranosyl rings in the carbohydrate-based substrates. In addition, eight polarized pyridinium C-H bonds, projecting from the roofs and floors of the temple receptors toward the binding cavities, form [C-H···O] hydrogen bonds, with the equatorially oriented OH groups on the sugars located inside the hydrophobic cavities. Four para-xylylene pillars play a crucial role in controlling the distance between the roof and floor. These temple receptors are highly selective for the binding of glucose and its derivatives. Furthermore, they show enhanced fluorescence upon binding with glucose in water, a property which is useful for glucose-sensing in aqueous solution.
RESUMEN
The charge transport in single-molecule junctions depends critically on the chemical identity of the anchor groups that are used to connect the molecular wires to the electrodes. In this research, we report a new anchoring strategy, called the electrostatic anchor, formed through the efficient Coulombic interaction between the gold electrodes and the positively charged pyridinium terminal groups. Our results show that these pyridinium groups serve as efficient electrostatic anchors forming robust gold-molecule-gold junctions. We have also observed binary switching in dicationic viologen molecular junctions, demonstrating an electron injection-induced redox switching in single-molecule junctions. We attribute the difference in low- and high-conductance states to a dicationic ground state and a radical cationic metastable state, respectively. Overall, this anchoring strategy and redox-switching mechanism could constitute the basis for a new class of redox-activated single-molecule switches.
RESUMEN
For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC-) as a substrate into a γ-cyclodextrin-containing metal-organic framework (CD-MOF-1), where the metals are K+ cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized-in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori-by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC- and four K+ cations on the waistline between the two γ-cyclodextrin tori in the tunnels. These non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.
Asunto(s)
Ciclodextrinas/química , Estructuras Metalorgánicas/química , Ciclodextrinas/síntesis química , Dimerización , Estructuras Metalorgánicas/síntesis química , Conformación Molecular , Procesos Fotoquímicos , EstereoisomerismoRESUMEN
Hydrocarbon belts including fully conjugated beltarenes and their (partially) saturated analogs have fascinated chemists for decades due to their aesthetic structures, tantalizing properties, and potential applications in supramolecular chemistry and carbon nanoscience and nanotechnology. However, synthesis of hydrocarbon belts still remains a formidable challenge. We report in this communication a general approach to hydrocarbon belts and their derivatives. Closing up all four fjords of resorcin[4]arene derivatives through multiple intramolecular Friedel-Crafts alkylation reactions in an operationally simple one-pot reaction manner enabled efficient construction of octohydrobelt[8]arenes. Synthesis of belt[8]arene from DDQ-oxidized aromatization of octohydrobelt[8]arene under different conditions resulted in aromatization and simultaneous [4 + 2] cycloaddition reactions with DDQ or TCNE to produce selectively tetrahydrobelt[8]arene-DDQ2, tetrahydrobelt[8]arene-TCNE2, and belt[8]arene-DDQ4 adducts. Formation of belt[8]arene, a fully conjugated hydrocarbon belt, was observed from retro-Diels-Alder reaction of a belt[8]arene-DDQ4 adduct with laser irradiation under MALDI conditions. The new and practical synthetic method established would open an avenue to create belt-shaped molecules from easily available starting materials.
RESUMEN
The ability to control the relative motions of component parts in molecules is essential for the development of molecular nanotechnology. The advent of mechanically interlocked molecules (MIMs) has enhanced significantly the opportunities for chemists to harness such motions in artificial molecular machines (AMMs). Recently, we have developed artificial molecular pumps (AMPs) capable of producing highly energetic oligo- and polyrotaxanes with high precision. Here, we report the design, synthesis, and operation of an AMP incorporating a photocleavable stopper that allows for the use of orthogonal stimuli. Our approach employs a ratchet mechanism to pump a ring onto a collecting chain, forming an intermediate [2]rotaxane. At a subsequent time, application of light triggers the release of the ring back into the bulk solution with temporal control. This process is monitored by the quenching of the fluorescence of a naphthalene-based fluorophore. This design may find application in the fabrication of molecular transporting systems with on-demand functions.
RESUMEN
Synthetic macrocycles capable of undergoing allosteric regulation by responding to versatile external stimuli are the subject of increasing attention in supramolecular science. Herein, we report a structurally transformative tetracationic cyclophane containing two 3,6-bis(4-pyridyl)-l,2,4,5-tetrazine (4-bptz) units, which are linked together by two p-xylylene bridges. The cyclophane, which possesses modular redox states and structural post-modifications, can undergo two reversibly consecutive two-electron reductions, affording first its bisradical dicationic counterpart, and then subsequently the fully reduced species. Furthermore, one single-parent cyclophane can afford effectively three other new analogs through box-to-box cascade transformations, taking advantage of either reductions or an inverse electron-demand Diels-Alder (IEDDA) reaction. While all four new tetracationic cyclophanes adopt rigid and symmetric box-like conformations, their geometries in relation to size, shape, electronic properties, and binding affinities toward polycyclic aromatic hydrocarbons can be readily regulated. This structurally transformative tetracationic cyclophane performs a variety of new tasks as a result of structural post-modifications, thus serving as a toolbox for probing the radical properties and generating rapidly a range of structurally diverse cyclophanes by efficient divergent syntheses. This research lays a solid foundation for the introduction of the structurally transformative tetracationic cyclophane into the realm of mechanically interlocked molecules and will provide a toolbox to construct and operate intelligent molecular machines.
RESUMEN
A class of γ-cyclodextrin-containing hybrid frameworks (CD-HFs) has been synthesized, employing γ-cyclodextrin (γ-CD) as the primary building blocks, along with 4-methoxysalicylate (4-MS-) anions as the secondary building blocks. CD-HFs are constructed through the synergistic exploitation of coordinative, electrostatic, and dispersive forces. The syntheses have been carried out using an organic counteranion co-assembly strategy, which allows for the introduction of 4-MS-, in place of inorganic OH-, into the cationic γ-CD-containing metal-organic frameworks (CD-MOFs). Although the packing arrangement of the γ-CD tori in the solid-state superstructure of CD-HFs is identical to that of the previously reported CD-MOFs, CD-HFs crystallize with lower symmetry and in the cuboid space group P43212-when compared to CD-MOF-1, which has the cubic unit cell of I432 space group-on account of the chiral packing of the 4-MS- anions in the CD-HF superstructures. Importantly, CD-HFs have ultramicroporous apertures associated with the pore channels, a significant deviation from CD-MOF-1, as a consequence of the contribution from the 4-MS- anions, which serve as supramolecular baffles. In gas adsorption-desorption experiments, CD-HF-1 exhibits a Brunauer-Emmett-Teller (BET) surface area of 306 m2 g-1 for CO2 at 195 K, yet does not uptake N2 at 77 K, confirming the difference in porosity between CD-HF-1 and CD-MOF-1. Furthermore, the 4-MS- anions in CD-HF-1 can be exchanged with OH- anions, leading to an irreversible single-crystal to single-crystal transformation, with rearrangement of coordinated metal ions. Reversible transformations were also observed in CD-MOF-1 when OH- ions were exchanged for 4-MS- anions, with the space group changing from I432 to R32. This organic counteranion co-assembly strategy opens up new routes for the construction of hybrid frameworks, which are inaccessible by existing de novo MOF assembly methodologies.
RESUMEN
The efficient preparation of single-crystalline ionic polymers and fundamental understanding of their structure-property relationships at the molecular level remains a challenge in chemistry and materials science. Here, we describe the single-crystal structure of a highly ordered polycationic polymer (polyelectrolyte) and its proton conductivity. The polyelectrolyte single crystals can be prepared on a gram-scale in quantitative yield, by taking advantage of an ultraviolet/sunlight-induced topochemical polymerization, from a tricationic monomer-a self-complementary building block possessing a preorganized conformation. A single-crystal-to-single-crystal photopolymerization was revealed unambiguously by in situ single-crystal X-ray diffraction analysis, which was also employed to follow the progression of molecular structure from the monomer, to a partially polymerized intermediate, and, finally, to the polymer itself. Collinear polymer chains are held together tightly by multiple Coulombic interactions involving counterions to form two-dimensional lamellar sheets (1 nm in height) with sub-nanometer pores (5 Å). The polymer is extremely stable under 254 nm light irradiation and high temperature (above 500 K). The extraordinary mechanical strength and environmental stability-in combination with its impressive proton conductivity (â¼3 × 10-4 S cm-1)-endow the polymer with potential applications as a robust proton-conducting material. By marrying supramolecular chemistry with macromolecular science, the outcome represents a major step toward the controlled synthesis of single-crystalline polyelectrolyte materials with perfect tacticity.
RESUMEN
Reported here are the syntheses, conformational structures, electrochemical properties, and noncovalent anion binding of corona[5]arenes. A (3+2) fragment coupling reaction proceeded efficiently under mild reaction conditions to produce a number of novel heteroatom- and methylene-bridged corona[3]arene[2]tetrazine macrocycles. Selective oxidation of the sulfur atom between two phenylene rings afforded sulfoxide- and sulfone-linked corona[5]arenes in good yields. All corona[5]arenes synthesized adopted similar 1,2,4-alternate conformational structures, forming pentagonal cavities. The cavity sizes and the electronic properties such as redox potentials, were measured with CV and DPV, and were influenced by the different bridging units. As electron-deficient macrocycles, the acquired corona[3]arene[2]tetrazines served as highly selective hosts, forming complexes with the hydrogen-bonded dimer of dihydrogen phosphate through cooperative anion-π interactions.
RESUMEN
Despite the aesthetically appealing structures and tantalizing physical and chemical properties, zigzag hydrocarbon belts and their heteroatom-embedded analogues remain challenging synthetic targets. We report herein the synthesis of diverse O/N-doped zigzag hydrocarbon belts based on selective bridging of the fjords of resorcin[4]arene derivatives through intramolecular SN Ar and palladium-catalyzed intermolecular C-N bond formation reactions. Preorganized conformations of mono-macrocyclic, half-belt and quasi-belt compounds were revealed to facilitate cyclization reactions to construct heteroatom-linked octahydrobelt[8]arenes. The acquired products had strained square-prism-shaped belt structures in which all six-membered heterocyclic rings adopted an unusual boat conformation with equatorially configured alkyl groups. The unprecedented heteroatom-bearing belts also exhibited different photophysical and redox properties to those of octahydrobelt[8]arene analogues.
RESUMEN
Herein we report a hydrogen-bonded three-dimensional porous supramolecular polyknot assembled from a rigid trigonal prismatic triptycene building block with six extended peripheral aryl-carboxyl groups. Within this superstructure, three arrays of undulated 2D rhombic subnets, which display an inclined polycatenation, are interconnected to give an unprecedented uninodal six-connected net with a point symbol of (3.44.610). Such an entanglement results in a trefoil knot motif, which, as the basic repeating unit, is fused and interlocked with itself three-dimensionally to afford a supramolecular polyknot. This example highlights the ability of supramolecular systems to form topologically complex architectures using geometrically simple building blocks.