Enhanced Interfacial Electron Transfer in Photocatalyst-Natural Enzyme Coupled Artificial Photosynthesis System: Tuning Strategies and Molecular Simulations.

Laccase is capable of catalyzing a vast array of reactions, but its low redox potential limits its potential applications. The use of photocatalytic materials offers a solution to this problem by converting absorbed visible light into electrons to facilitate enzyme catalysis. Herein, MIL-53(Fe) and NH2-MIL-53(Fe) serve as both light absorbers and enzyme immobilization carriers, and laccase is employed for solar-driven chemical conversion. Electron spin resonance spectroscopy results confirm that visible light irradiation causes rapid transfer of photogenerated electrons from MOF excitation to T1 Cu(II) of laccase, significantly increasing the degradation rate constant of tetracycline (TC) from 0.0062 to 0.0127 min-1. Conversely, there is only minimal or no electron transfer between MOF and laccase in the physical mixture state. Theoretical calculations demonstrate that the immobilization of laccase's active site and its covalent binding to the metal-organic framework surface augment the coupled system's activity, reducing the active site accessible from 27.8 to 18.1 Å. The constructed photo-enzyme coupled system successfully combines enzyme catalysis' selectivity with photocatalysis's high reactivity, providing a promising solution for solar energy use.

MXene/Nitrogen-Doped Carbon Nanosheet Scaffold Electrode toward High-Performance Solid-State Zinc Ion Supercapacitor.

While MXene is widely used as an electrode material for supercapacitor, the intrinsic limitation of stacking caused by the interlayer van der Waals forces has yet to be overcome. In this work, a strategy is proposed to fabricate a composite scaffold electrode (MCN) by intercalating MXene with highly nitrogen-doped carbon nanosheets (CN). The 2D structured CN, thermally converted and pickling from Zn-hexamine (Zn-HMT), serves as a spacer that effectively prevents the stacking of MXene and contributes to a hierarchically scaffolded structure, which is conducive to ion movement; meanwhile, the high nitrogen-doping of CN tunes the electronic structure of MCN to facilitate charge transfer and providing additional pseudocapacitance. As a result, the MCN50 composite electrode achieves a high specific capacitance of 418.4 F g-1 at 1 A g-1. The assembled symmetric supercapacitor delivers a corresponding power density of 1658.9 W kg-1 and an energy density of 30.8 Wh kg-1. The all-solid-state zinc ion supercapacitor demonstrates a superior energy density of 68.4 Wh kg-1 and a power density of 403.5 W kg-1 and shows a high capacitance retention of 93% after 8000 charge-discharge cycles. This study sheds a new light on the design and development of novel MXene-based composite electrodes for high performance all-solid-state zinc ion supercapacitor.

Facile Design of Flexible, Strong, and Highly Conductive MXene-Based Composite Films for Multifunctional Applications.

Strong, conductive, and flexible materials with improving ion accessibility have attracted significant attention in electromagnetic interference (EMI) and foldable wearable electronics. However, it still remains a great challenge to realize high performance at the same time for both properties. Herein, a microscale structural design combined with nanostructures strategy to fabricate TOCNF(F)/Ti3 C2 Tx (M)@AgNW(A) composite films via a facile vacuum filtration process followed by hot pressing (TOCNF = TEMPO-oxidized cellulose nanofibrils, NW = nanowires) is described. The comparison reveals that different microscale structures can significantly influence the properties of thin films, especially their electrochemical properties. Impressively, the ultrathin MA/F/MA film with enhanced layer in the middle exhibits an excellent tensile strength of 107.9 MPa, an outstanding electrical conductivity of 8.4 × 106 S m-1 , and a high SSE/t of 26 014.52 dB cm2 g-1 . The assembled asymmetric MA/F/MA//TOCNF@CNT (carbon nanotubes) supercapacitor leads to a significantly high areal energy density of 49.08 µWh cm-2 at a power density of 777.26 µW cm-2 . This study proposes an effective strategy to circumvent the trade-off between EMI performance and electrochemical properties, providing an inspiration for the fabrication of multifunctional films for a wide variety of applications in aerospace, national defense, precision instruments, and next-generation electronics.

A Multifunctional Asymmetric Fabric for Sustained Electricity Generation from Multiple Sources and Simultaneous Solar Steam Generation.

Harvesting electrical energy from water and moisture has emerged as a novel ecofriendly energy conversion technology. Herein, a multifunctional asymmetric polyaniline/carbon nanotubes/poly(vinyl alcohol) (APCP) that can produce electric energy from both saline water and moisture and generate fresh water simultaneously is developed. The constructed APCP possesses a negatively charged porous structure that allows continuous generation of protons and ion diffusion through the material, and a hydrophilicity-hydrophobic interface which results in a constant potential difference and sustainable output. A single APCP can maintain stable output for over 130 h and preserve a high voltage of 0.61 V, current of 81 µA, and power density of 82.4 µW cm-3 with 0.15 cm3 unit size in the water-induced electricity generation process. When harvesting moisture energy, the APCP creates dry-wet asymmetries and triggers the spontaneous development of electrical double layer with a current density of 1.25 mA cm-3 , sufficient to power small electronics. A device consisting of four APCP can generate stable electricity of 3.35 V and produce clean water with an evaporation rate of 2.06 kg m-2  h-1 simultaneously. This work provides insights into the fabrication of multifunctional fabrics for multisource energy harvesting and simultaneous solar steam generation.

A Simple and Effective Physical Ball-Milling Strategy to Prepare Super-Tough and Stretchable PVA@MXene@PPy Hydrogel for Flexible Capacitive Electronics.

Biomimetic flexible electronics for E-skin have received increasing attention, due to their ability to sense various movements. However, the development of smart skin-mimic material remains a challenge. Here, a simple and effective approach is reported to fabricate super-tough, stretchable, and self-healing conductive hydrogel consisting of polyvinyl alcohol (PVA), Ti3 C2 Tx MXene nanosheets, and polypyrrole (PPy) (PMP hydrogel). The MXene nanosheets and Fe3+ serve as multifunctional cross-linkers and effective stress transfer centers, to facilitate a considerable high conductivity, super toughness, and ultra-high stretchability (elongation up to 4300%) for the PMP hydrogel with. The hydrogels also exhibit rapid self-healing and repeatable self-adhesive capacity because of the presence of dynamic borate ester bond. The flexible capacitive strain sensor made by PMP hydrogel shows a relatively broad range of strain sensing (up to 400%), with a self-healing feature. The sensor can precisely monitor various human physiological signals, including joint movements, facial expressions, and pulse waves. The PMP hydrogel-based supercapacitor is demonstrated with a high capacitance retention of ≈92.83% and a coulombic efficiency of ≈100%.

The Status of Representative Anode Materials for Lithium-Ion Batteries.

Since the invention of lithium-ion batteries as a rechargeable energy storage system, it has uncommonly promoted the development of society. It has a wide variety of applications in electronic equipment, electric automobiles, hybrid vehicles, and aerospace. As an indispensable component of lithium-ion batteries, anode materials play an essential role in the electrochemical characteristics of lithium-ion batteries. In this review, we described the development from lithium-metal batteries to lithium-ion batteries in detail on the time axis as the first step; This was followed by an introduction to several commonly used anode materials, including graphite, silicon, and transition metal oxide with discussions the charge-discharge mechanism, challenges and corresponding strategies, and a collation of recent interesting work; Finally, three anode materials are summarized and prospected. Hopefully, this review can serve both the newcomers and the predecessors in the field.

An Overview of Metal-Organic Framework Based Electrocatalysts: Design and Synthesis for Electrochemical Hydrogen Evolution, Oxygen Evolution, and Carbon Dioxide Reduction Reactions.

Due to the increasing global energy demands, scarce fossil fuel supplies, and environmental issues, the pursued goals of energy technologies are being sustainable, more efficient, accessible, and produce near zero greenhouse gas emissions. Electrochemical water splitting is considered as a highly viable and eco-friendly energy technology. Further, electrochemical carbon dioxide (CO2 ) reduction reaction (CO2 RR) is a cleaner strategy for CO2 utilization and conversion to stable energy (fuels). One of the critical issues in these cleaner technologies is the development of efficient and economical electrocatalyst. Among various materials, metal-organic frameworks (MOFs) are becoming increasingly popular because of their structural tunability, such as pre- and post- synthetic modifications, flexibility in ligand design and its functional groups, and incorporation of different metal nodes, that allows for the design of suitable MOFs with desired quality required for each process. In this review, the design of MOF was discussed for specific process together with different synthetic methods and their effects on the MOF properties. The MOFs as electrocatalysts were highlighted with their performances from the aspects of hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and electrochemical CO2 RR. Finally, the challenges and opportunities in this field are discussed.

Composite film with adjustable number of layers for slow release of humic acid and soil remediation.

In this study, to improve the soil amendment performance of film materials, composite films with the adjustable number of layers and controlled slow-release time were prepared using sodium alginate (SA), chitosan (CS) and activated charcoal (AC) as raw materials. The prepared multilayer films exhibited a wide pH response range and excellent slow-release time. The cumulative release of humic acid (HA) increased from 19.87 ± 0.98% to 66.72 ± 1.06% with increasing the pH from 4.0 to 10.0 after 700 h of slow-release. In addition, after 50 d of remediation in red soil, plantation soil, and saline soil, the NH4+-N, Olsen-P, Olsen-K, and organic matter contents in the three soils were increased by 2.91-28.62 mg/kg, 46.97-70.43 mg/kg, 55.89-77.01 mg/kg, and 12.47-22.52 g/kg, respectively, and were able to provide sustained crop growth promotion effect. This study demonstrates the promising application of multilayer film in soil remediation and agricultural production.

Mechanically-robust electrospun nanocomposite fiber membranes for oil and water separation.

Mechanically-robust nanocomposite membranes have been developed via crosslinking chemistry and electrospinning technique based on the rational selection of dispersed phase materials with high Young's modulus (i.e., graphene and multiwalled carbon nanotubes) and Cassie-Baxter design and used for oil and water separation. Proper selection of dispersed phase materials can enhance the stiffness of nanocomposite fiber membranes while their length has to be larger than their critical length. Chemical modification of the dispersed phase materials with fluorochemcials and their induced roughness were critical to achieve superhydrophobocity. Surface analytic tools including goniometer, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, atomic force microscopy (AFM) and scanning electron microscope (SEM) were applied to characterize the superhydrophobic nanocomposite membranes. An AFM-based nanoindentation technique was used to measure quantitativly the stiffness of the nanocomposite membranes for local region and whole composites, compared with the results by a tensile test technique. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to confirm composition and formation of nanocomposite membranes. These membranes demonstrated excellent oil/water separation. This work has potential application in the field of water purification and remediation.

Absorption behavior of polycarboxylate superplasticizer with different molecular structures on montmorillonite.

Polycarboxylate (PCE) is a high performance superplasticizer for modern concrete. With the high quality sand becoming precious, more and more low quality sands are used in concrete. However, low quality sands generally contain a relatively high content of montmorillonite (MMT), which could seriously reduce the efficiency of PCE. In order to develop PCE suitable for concrete with low quality sands, the absorption behavior on MMT of PCE with different side chains and acid/ether ratio was investigated. In order to explore the effect of MMT on PCE, two macromonomers were selected, isoprene glycol ether 400(TPEG400) and isoprene glycol ether 2400 (TPEG2400), to synthesize six long and short side chain comb-type PCEs with acid-ether ratios of 1.5:1, 2.5:1 and 3.5:1, respectively. The MMT tolerance mechanism of comb-type PCE in MMT-containing cement slurry was examined by FT-IR, DLS, TOC and other analysis. The PCE with long side chain is much easier to be inserted into the layered structure of MMT, resulting in intercalation absorption. The absorption amount of two kinds of side chain PCE on the MMT particles decreased as the acid ether ratio increases. PCE with long side chains showed shear-thickening properties in MMT-containing cement slurry, on the contrary, short side chains showed shear-thinning properties.

A Strand Entangled Supramolecular PANI/PAA Hydrogel Enabled Ultra-Stretchable Strain Sensor.

Hydrogel electronics have attracted growing interest for emerging applications in personal healthcare management, human-machine interaction, etc. Herein, a "doping then gelling" strategy to synthesize supramolecular PANI/PAA hydrogel with a specific strand entangled network is proposed, by doping the PANI with acrylic acid (AA) monomers to avoid PANI aggregation. The high-density electrostatic interaction between PAA and PANI chains serves as a dynamic bond to initiate the strand entanglement, enabling PAA/PANI hydrogel with ultra-stretchability (2830%), high breaking strength (120 kPa), and rapid self-healing properties. Moreover, the PAA/PANI hydrogel-based sensor with a high strain sensitivity (gauge factor = 12.63), a rapid responding time (222 ms), and a robust conductivity-based sensing behavior under cyclic stretching is developed. A set of strain sensing applications to precisely monitor human movements is also demonstrated, indicating a promising application prospect as wearable devices.

A Visible Light Driven Photoelectrochemical Chloramphenicol Aptasensor Based on a Gold Nanoparticle-Functionalized 3D Flower-like MoS2/TiO2 Heterostructure.

Developing a photoactive material by combining the characteristics of a wide light response range and effective separation of photogenerated electron-hole pairs remains a huge challenge for the construction of a photoelectrochemical (PEC) sensing platform. Herein, a gold nanoparticle (AuNP)/MoS2/TiO2 composite was prepared through the facile hydrothermal method coupled with an in situ photoreduction technology. Benefiting from both the compositional and structure merits, the composite not only extends the absorption range to visible light but also enhances the photoelectric conversion efficiency by transferring photogenerated electrons into the conduction band of semiconductors from the plasmonic AuNP. Meanwhile, the thiolated aptamers were attached to the surface of AuNP/MoS2/TiO2 composites through the Au-S bonding to construct a visible light driven PEC aptasensor for ultrasensitive detection chloramphenicol (CAP). In the presence of CAP, the aptamers anchored on the surface of the photoactive materials could specifically recognize CAP and interact with it to form a bioaffinity complex with a steric hindrance effect, resulting in the rapid decrease of photocurrent responses. Based on this photocurrent suppression strategy, the constructed PEC aptasensing platform exhibited a high sensitivity with a wide linear range from 5 pM to 100 nM and a low detection limit of 0.5 pM.

Waterwheel-inspired high-performance hybrid electromagnetic-triboelectric nanogenerators based on fluid pipeline energy harvesting for power supply systems and data monitoring.

In this work, a self-powered system based on a triboelectric-electromagnetic hybrid pipeline energy harvesting module is demonstrated. Rabbit fur and poly tetra fluoroethylene (PTFE) are used as triboelectric electrodes to fabricate disk-type soft-contact triboelectric nanogenerators (TENGs) instead of traditional direct-contact TENGs to collect the mechanical energy of water flow and convert it into electrical energy. This design has a stable electrical output and gives an improved durability. Its simple fabrication process enables excellent potential for practical applications in industry. In addition, the hybridization of electromagnetic generator module and TENGs module to form a triboelectric-electromagnetic hybrid nanogenerator (TEHNG) can improve the electrical output performance, especially the current output. TEHNG cannot only power small electronic devices, such as lighting systems, but also collect independent fluid energy and monitor data signals simultaneously in harsh environments, such as fluid energy harvesting in industrial production pipelines and temperature and humidity in fluid environments. This work provides an efficient strategy to harvest multiple energies simultaneously, significantly increasing the yield and promoting the application of TENGs in engineering.

In Situ Synthesis of Uranyl-Imprinted Nanocage for Selective Uranium Recovery from Seawater.

An adaptive coordination structure is vital for selective uranium extraction from seawater. By strategy of molecular imprinting, uranyl is introduced into a multivariate metal-organic framework (MOF) during the synthesis process to guide the in situ construction of proper nanocage structure for targeting uranyl binding. Except for the coordination between uranium with four oxygen from the materials, the axial oxygen of uranyl also forms hydrogen bonds with hydrogen from the phenolic hydroxyl group, which enhances the binding affinity of the material to uranyl. Attributing to the high binding affinity, the adsorbent shows high uranium binding selectivity to uranyl against not only the interfering metal ions, but also the carbonate group that coordinates with uranyl to form [UO2 (CO)3 ]4- in seawater. In natural seawater, the adsorbent realizes a high uranium adsorption capacity of 7.35 mg g-1 , together with an 18.38 times higher selectivity to vanadium.

Microwave Hydrothermally Synthesized Metal-Organic Framework-5 Derived C-doped ZnO with Enhanced Photocatalytic Degradation of Rhodamine B.

C-doped ZnO particles have been successfully prepared by the calcination using microwave hydrothermally prepared metal-organic framework-5 (MOF-5) as the precursor. MOF-5 was turned into C-doped ZnO through calcination at 500 °C, and its cubic shape was well-maintained. X-ray photoelectron spectroscopic studies confirmed the C-doping in the ZnO. The as-prepared C-doped ZnO demonstrated a Rhodamine B (RhB) degradation efficiency of 98% in 2 h under an solar-simulated light irradiation, much higher than that of C-doped ZnO derived from MOF-5 synthesized by the ordinary hydrothermal method. The trapping experiment revealed that the crucial factors in the RhB removal were photogenerated h+ and •O2-.

The Properties and Preparation Methods of Different Boron Nitride Nanostructures and Applications of Related Nanocomposites.

Due to special non-metallic polar bond between the III group (with certain metallic properties) element boron (B) and the V group element nitrogen (N), boron nitride (BN) has unique physical and chemical properties such as strong high-temperature resistance, oxidation resistance, heat conduction, electrical insulation and neutron absorption. Its unique lamellar, reticular and tubular morphologies and physicochemical properties make it attractive in the fields of adsorption, catalysis, hydrogen storage, thermal conduction, insulation, dielectric substrate of electronic devices, radiation protection, polymer composites, medicine, etc. Therefore, the synthesis and properties of BN derived materials become the main research hotspots of low-dimensional nanomaterials. This paper reviews the synthetic methods, overall properties, and applications of BN nanostructures and nanocomposites. In addition, challenges and prospect of this kind of materials are discussed.

Overview of Polyvinyl Alcohol Nanocomposite Hydrogels for Electro-Skin, Actuator, Supercapacitor and Fuel Cell.

The properties of polyvinyl alcohol (PVA) nanocomposite hydrogels influenced by nanoparticles are reviewed. Various kinds of nanoparticles with excellent mechanical and electrical properties have been introduced into PVA hydrogel to produce stretchable and conductive PVA nanocomposite hydrogel. Understanding the mechanism between the matrix of PVA hydrogel and nanoparticles is therefore critical for the development of PVA nanocomposite hydrogels. This review focuses on the nanoparticles include carbon nanotubes, graphene oxide and metal nanoparticles, and describes the effects of nanoparticles on the mechanical and conductive properties of PVA nanocomposite hydrogels. A new promising area of soft stretchable PVA nanocomposite hydrogel is highlighted for possible applications. Finally, a brief outlook for future research is presented.

Advances in Template Prepared Nano-Oxides and their Applications: Polluted Water Treatment, Energy, Sensing and Biomedical Drug Delivery.

The nano-oxide materials with special structures prepared by template methods have a good dispersion, regular structures and high specific surface areas. Therefore, in some areas, improved properties are observed than conventional bulk oxide materials. For example, in the treatment of dye wastewater, the treatment efficiency of adsorbents and catalytic materials prepared by template method was about 30 % or even higher than that of conventional samples. This review mainly focuses on the progress of inorganic, organic and biological templates in the preparation of micro- and nano- oxide materials with special morphologies, and the roles of the prepared materials as adsorbents and photocatalysts in dye wastewater treatment. The characteristics and advantages of inorganic, organic and biological template are also summarized. In addition, the applications of template method prepared oxides in the field of sensors, drug carrier, energy materials and other fields are briefly discussed with detailed examples.

Overview of Ionogels in Flexible Electronics.

Ionogels have aroused wide interests in the field of flexible electronics. The combination of solid-state networks and ionic liquids opens up thousands of possibilities for ionogels. The unique structures of ionogels endow them excellent mechanical properties, conductivity and thermal stability to approach the challenge of flexible electronic. A large number of new ionogels have been developed by different methods including the exchange of solution, polymeric ionic liquid and in-situ reactions in ionic liquids (gelation of low molecular weight gelators, self-assembly of block polymers, formation of double-network structure, ionogel nanocomposites and direct polymerization of polymerizable monomers). The aim of this review is to discuss different preparation methods of ionogels and the comparison of their advantages.

Research Progress in the Field of Adsorption and Catalytic Degradation of Sewage by Hydrotalcite-Derived Materials.

With the rapid development of industry and agriculture and the greatly improved living conditions, the resultant gradually deteriorated environments threaten the human beings. Refractory or even toxic pollutants, which are from different industries such as printing and dyeing, pesticides, chemicals, petrochemicals, plastics and rubber, seriously threat the ecosystems and human health. Having the advantages of flexible composition, unique structure, high stability, memory effect, easy preparation and low cost, hydrotalcite compounds have a great potential in sewage degradation and environmental protection. This study focuses on the adsorption and catalytic properties (such as photocatalysis, electrocatalysis and photoelectrocatalysis) of hydrotalcite-derived materials for treating organic, inorganic and heavy metal ion sewage. The types of adsorption and catalysis, and the effects of various influencing factors on the degradation efficiency were discussed as well.