Efficient Hydroxyapatite Extraction from Salmon Bone Waste: An Improved Lab-Scaled Physico-Chemico-Biological Process.

The demand for novel tissue grafting and regenerative wound care biomaterials is growing as traditional options often fall short in biocompatibility, functional integration with human tissue, associated cost(s), and sustainability. Salmon aquaculture generates significant volumes of waste, offering a sustainable opportunity for biomaterial production, particularly in osteo-conduction/-induction, and de novo clinical/surgical bone regeneration. Henceforth, this study explores re-purposing salmon waste through a standardized pre-treatment process that minimizes the biological waste content, followed by a treatment stage to remove proteins, lipids, and other compounds, resulting in a mineral-rich substrate. Herein, we examined various methods-alkaline hydrolysis, calcination, and NaOH hydrolysis-to better identify and determine the most efficient and effective process for producing bio-functional nano-sized hydroxyapatite. Through comprehensive chemical, physical, and biological assessments, including Raman spectroscopy and X-ray diffraction, we also optimized the extraction process. Our modified and innovative alkaline hydrolysis-calcination method yielded salmon-derived hydroxyapatite with a highly crystalline structure, an optimal Ca/P ratio, and excellent biocompatibility. The attractive nano-scale cellular/tissular properties and favorable molecular characteristics, particularly well-suited for bone repair, are comparable to or even surpass those of synthetic, human, bovine, and porcine hydroxyapatite, positioning it as a promising candidate for use in tissue engineering, wound healing, and regenerative medicine indications.

Quality of life and stability of tooth color change at three months after dental bleaching.

PURPOSE: Intracoronary bleaching is a minimally invasive, alternative treatment that addresses aesthetic concerns related to non-vital teeth discoloration. However, to the best of our knowledge, no studies have assessed the psychosocial impacts of such procedures on patients' aesthetic perceptions. The aim of this study was to evaluate aesthetic perceptions and the psychosocial impact of patients up to 3 months after their teeth had been bleached with hydrogen peroxide (35%) and carbamide peroxide (37%) using the walking bleach technique. METHODS: The patients were randomly divided into two groups according to the bleaching agent used: G1 = hydrogen peroxide 35% (n = 25) and G2 = carbamide peroxide 37% (n = 25). Non-vital bleaching was performed in four sessions. Color was objectively (ΔE) and subjectively (ΔSGU) evaluated. Aesthetic perception and psychosocial factors were evaluated before, 1 week and 1 month after the bleaching using the Oral Health Impact Profile (OHIP) and Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) questionnaires. RESULTS: The color change (ΔE) values at 1 month were G1 = 16.80 ± 6.07 and G2 = 14.09 ± 4.83. These values remained stable until the third month after treatment (p > 0.05). There was a decrease in the values of OHIP-aesthetics and PIDAQ after treatment versus baseline (p < 0.05). This status was maintained through the third month after treatment. CONCLUSIONS: Both agents were highly effective and had a positive impact on the aesthetic perception and psychosocial impact of patients, values that also remained stable over time. Non-vital bleaching yields positive and stable impacts on aesthetic perception and psychosocial factors. ClinicalTrials.gov identifier NCT02718183.

Graftless Maxillary Sinus Lift Using Lateral Window Approach: A Systematic Review.

PURPOSE: The aim was to determine the survival rate of dental implants installed in the posterior region of the maxilla after a graftless maxillary sinus lift via the lateral window approach and to identify the factors involved in the results. MATERIALS AND METHODS: A systematic search was done on MEDLINE, EMBASE, LILACS, Scopus, and Science Direct up to June 2016; additional studies were identified through an analysis of references. Primary studies in English, Spanish, Portuguese, and French were included; the selection and data extraction process was conducted by 2 investigators independently, and the methodological quality was evaluated by means of the Effective Public Health Practice Project's Quality Assessment Tool. RESULTS: The combined search identified 232 articles. After the selection process, 11 articles were identified, 9 of which were prospective and 2 were retrospective. In all of them, the graftless maxillary sinus lift was done with the immediate installation of the implant. All the studies included presented a low methodological quality. The mean survival rate of the implants was 97% with an average new intrasinus bone formation of 6.2 mm. CONCLUSION: This technique has a high implant survival although it is not possible to identify its correct indication and contraindication.

Early Treatment of Unilateral Condylar Hyperplasia in Adolescents: Preliminary Results.

Facial asymmetry associated with unilateral condylar hyperplasia (UCH) is a rare disease. The aim of this study was to evaluate the clinical conditions of progressive facial asymmetry in young subjects treated with high condylectomy. A retrospective study was performed including nine subjects diagnosed with UCH type 1B and progressive facial asymmetry around 12 years old with an upper canine progressing towards dental occlusion. After an analysis and a decision of treatment, orthodontics began one to two weeks prior to the condylectomy (with a mean vertical reduction of 4.83 ± 0.44 mm). Facial and dental asymmetry, dental occlusion, TMJ status and an open/closing mouth were analyzed before surgery and in the final stage of treatment, almost 3 years after surgery. Statistical analyses were performed using the Shapiro-Wilk test and a Student's t-test considering a p value of <0.05. Comparing T1 (before surgery) and T2 (once orthodontic treatment was finalized), the operated condyle showed a similar height to that observed in stage 1 with a 0.12 mm difference in height (p = 0.8), whereas the non-operated condyle showed greater height increase with an average of 3.88 mm of vertical growth (p = 0.0001). This indicated that the non-operated condyle remained steady and that the operative condyle did not register significant growth. In terms of facial asymmetry in the preoperative stage, a chin deviation of 7.55 mm (±2.57 mm) was observed; in the final stage, there was a significant reduction in the chin deviation with an average of 1.55 mm (±1.26 mm) (p = 0.0001). Given the small number of patients in the sample, we can conclude that high condylectomy (approx. 5 mm), if performed early, especially in the mixed-dentition stage before full canine eruption, is beneficial for the early resolution of asymmetry and thus the avoidance of future orthognathic surgery. However, further follow-up until the end of facial growth is required.

NanoBubble-Mediated Oxygenation: Elucidating the Underlying Molecular Mechanisms in Hypoxia and Mitochondrial-Related Pathologies.

Worldwide, hypoxia-related conditions, including cancer, COVID-19, and neuro-degenerative diseases, often lead to multi-organ failure and significant mortality. Oxygen, crucial for cellular function, becomes scarce as levels drop below 10 mmHg (<2% O2), triggering mitochondrial dysregulation and activating hypoxia-induced factors (HiFs). Herein, oxygen nanobubbles (OnB), an emerging versatile oxygen delivery platform, offer a novel approach to address hypoxia-related pathologies. This review explores OnB oxygen delivery strategies and systems, including diffusion, ultrasound, photodynamic, and pH-responsive nanobubbles. It delves into the nanoscale mechanisms of OnB, elucidating their role in mitochondrial metabolism (TFAM, PGC1alpha), hypoxic responses (HiF-1alpha), and their interplay in chronic pathologies including cancer and neurodegenerative disorders, amongst others. By understanding these dynamics and underlying mechanisms, this article aims to contribute to our accruing knowledge of OnB and the developing potential in ameliorating hypoxia- and metabolic stress-related conditions and fostering innovative therapies.

Thermal Load and Heat Transfer in Dental Titanium Implants: An Ex Vivo-Based Exact Analytical/Numerical Solution to the 'Heat Equation'.

INTRODUCTION: Heat is a kinetic process whereby energy flows from between two systems, hot-to-cold objects. In oro-dental implantology, conductive heat transfer/(or thermal stress) is a complex physical phenomenon to analyze and consider in treatment planning. Hence, ample research has attempted to measure heat-production to avoid over-heating during bone-cutting and drilling for titanium (Ti) implant-site preparation and insertion, thereby preventing/minimizing early (as well as delayed) implant-related complications and failure. OBJECTIVE: Given the low bone-thermal conductivity whereby heat generated by osteotomies is not effectively dissipated and tends to remain within the surrounding tissue (peri-implant), increasing the possibility of thermal-injury, this work attempts to obtain an exact analytical solution of the heat equation under exponential thermal-stress, modeling transient heat transfer and temperature changes in Ti implants (fixtures) upon hot-liquid oral intake. MATERIALS AND METHODS: We, via an ex vivo-based model, investigated the impact of the (a) material, (b) location point along implant length, and (c) exposure time of the thermal load on localized temperature changes. RESULTS: Despite its simplicity, the presented solution contains all the physics and reproduces the key features obtained in previous numerical analyses studies. To the best of our knowledge, this is the first introduction of the intrinsic time, a "proper" time that characterizes the geometry of the dental implant fixture, where we show, mathematically and graphically, how the interplay between "proper" time and exposure time influences temperature changes in Ti implants, under the suitable initial and boundary conditions. This fills the current gap in the literature by obtaining a simplified yet exact analytical solution, assuming an exponential thermal load model relevant to cold/hot beverage or food intake. CONCLUSIONS: This work aspires to accurately complement the overall clinical diagnostic and treatment plan for enhanced bone-implant interface, implant stability, and success rates, whether for immediate or delayed loading strategies.

Bio-Inspired Muco-Adhesive Polymers for Drug Delivery Applications.

Muco-adhesive drug delivery systems continue to be one of the most studied for controlled pharmacokinetics and pharmacodynamics. Briefly, muco-adhesive polymers, can be described as bio-polymers that adhere to the mucosal (mucus) surface layer, for an extended residency period of time at the site of application, by the help of interfacial forces resulting in improved drug delivery. When compared to traditional drug delivery systems, muco-adhesive carriers have the potential to enhance therapeutic performance and efficacy, locally and systematically, in oral, rectal, vaginal, amongst other routes. Yet, the achieving successful muco-adhesion in a novel polymeric drug delivery solution is a complex process involving key physico-chemico-mechanical parameters such as adsorption, wettability, polymer chain length, inter-penetration and cross-linking, to list a few. Hence, and in light of accruing progress, evidence and interest, during the last decade, this review aims to provide the reader with an overview of the theories, principles, properties, and underlying mechanisms of muco-adhesive polymers for pharmaceutics; from basics to design to characterization to optimization to evaluation to market. A special focus is devoted to recent advances incorporating bio-inspired polymers for designing controlled muco-adhesive drug delivery systems.

Neuro-Muscular Dentistry: the "diamond" concept of electro-stimulation potential for stomato-gnathic and oro-dental conditions.

Oro-Pharyngeal Dysphagia - or simply dysphagia - is the difficulty (persistent) in swallowing/passing food and/or liquid from the mouth to the pharynx into the esophagus and finally the stomach; a deglutition disorder (a symptom, by definition, often due to neuro-degenerative/-muscular, drug-induced or localized structural pathologies such as head and neck tumors, lesions and associated surgical and/or radiation injuries) linked to severe consequences on Quality of Life (QoL), including malnutrition, dehydration, and even sudden death. Likewise, Temporo-Mandibular Jaw and Joint disorder(s) - or simply TMD - is a multifactorial etiological condition, regularly encountered in the dental office. Whether due to malocclusion, bruxism, stress and/or trauma, TMD destabilizes the whole cranio-mandibular system structurally and functionally, via affecting mastication, teeth, supporting structures, comfort and aesthetics, and thus, QoL, again. While several treatment regimens do exist for such conditions, some of which have been standardized for use over the years, most continue to lack proper evidence-based literature support. Hence, (1) caution is to be exercised; and (2) the need for alternative therapeutic strategies is amplified, subsequently, the door for innovation is wide open. Indeed, neuromuscular electrical stimulation or "NMES", is perhaps a fine example. Herein, we present the interested oro-dental health care provider with an up-dated revision of this therapeutic modality, its potential benefits, risks and concerns, to best handle the dysphagic patient: an intra-disciplinary approach or strategy bridging contemporary dentistry with speech and language therapy; a rather obscure and un-discovered yet critical allied health profession. A pre-clinical and clinical prospectus on employing inventive NMES-based regimens and devices to manage TMD is also highlighted.

A hybrid rhOP-1 delivery system enhances new bone regeneration and consolidation in a rabbit model of distraction osteogenesis.

The effect of an early single injection of biodegradable core-shell nanoparticles (NPs) loaded with various low doses of recombinant human bone morphogenetic protein-7 (rhBMP-7/rhOP-1) on new bone regeneration and consolidation in a rabbit model of tibial distraction osteogenesis (DO) was investigated. The Regenerate bone was examined using soft radiography, densitometry, micro-computed tomography and histomorphometry. Compared to control, higher bone fill scores and a two- to three-fold increase in the quantity of mineralized tissue were prominent in the 1.0 and 5.0 microg OP-1/NPs groups, 3 weeks post-injections (P>0.05). Histologically, the distraction gap was completely ossified and the osteotomy margins poorly demarcated in those groups, one week into the consolidation phase. An up-regulation of various growth factors, ligands, and receptors was observed using immunohistochemistry. This novel hybrid delivery system maintains the bioactivity of the encapsulant, minimizes the therapeutic doses of rhOP-1, and accelerates DO via its localized, release-controlled, osteogenic, and naturally biocompatible polymeric properties.

Delivery of recombinant bone morphogenetic proteins for bone regeneration and repair. Part A: Current challenges in BMP delivery.

Recombinant human bone morphogenetic proteins (rhBMPs) have been extensively investigated for developing therapeutic strategies aimed at the restoration and treatment of orthopaedic as well as craniofacial conditions. In this first part of the review, we discuss the rationale for the necessary use of carrier systems to deliver rhBMP-2 and rhBMP-7 to sites of bone tissue regeneration and repair. General requirements for growth factor delivery systems emphasizing the distinction between localized and release-controlled delivery strategies are presented highlighting the current limitations in the development of an effective rhBMP delivery system applicable in clinical bone tissue engineering.

Delivery of recombinant bone morphogenetic proteins for bone regeneration and repair. Part B: Delivery systems for BMPs in orthopaedic and craniofacial tissue engineering.

Localized and release-controlled delivery systems for the sustained expression of the biologic potency of rhBMPs are essential. A substantial number of biomaterials have been investigated thus far. Most fail after implantation or administration mainly due to either being too soft, difficult to control and/or stabilize mechanically. In the second part of this review, we review a representative selection of rhBMP-2 and rhBMP-7 carrier materials and delivery systems ranging from simple nano/microparticles to complex 3-D scaffolds in sites of orthopaedic and craniofacial bone regeneration and repair.

Mathematical Modeling for Pharmaco-Kinetic and -Dynamic Predictions from Controlled Drug Release NanoSystems: A Comparative Parametric Study.

Predicting pharmacokinetics, based on the theory of dynamic systems, for an administered drug (whether intravenously, orally, intramuscularly, etc.), is an industrial and clinical challenge. Often, mathematical modeling of pharmacokinetics is preformed using only a measured concentration time profile of a drug administered in plasma and/or in blood. Yet, in dynamic systems, mathematical modeling (linear) uses both a mathematically described drug administration and a mathematically described body response to the administered drug. In the present work, we compare several mathematical models well known in the literature for simulating controlled drug release kinetics using available experimental data sets obtained in real systems with different drugs and nanosized carriers. We employed the χ 2 minimization method and concluded that the Korsmeyer-Peppas model (or power-law model) provides the best fit, in all cases (the minimum value of χ 2 per degree of freedom; χ min 2/d.o.f. = 1.4183, with 2 free parameters or m = 2). Hence, (i) better understanding of the exact mass transport mechanisms involved in drugs release and (ii) quantitative prediction of drugs release can be computed and simulated. We anticipate that this work will help devise optimal pharmacokinetic and dynamic release systems, with measured variable properties, at nanoscale, characterized to target specific diseases and conditions.

Morphological Analysis of the Human Maxillary Sinus Using Three-Dimensional Printing.

BACKGROUND: The maxillary sinus (MS) is described as a pyramid-shaped cavity of the maxilla. AIM: The aim of this research is to present a strategy for morphological analysis of the MS using three-dimensional (3D) printing acquired through cone-beam computed tomography images. MATERIAL AND METHODS: A cross-sectional exploratory, single-blind study was conducted, including 24 subjects. MSs were reconstructed, and 3D virtual modeling was done bilaterally, obtaining 48 physical models generated on a 3D printer. The statistical analysis used tests of normality and tests using a value of P < 0.05 to establish statistical significance. RESULTS: The mean of the MS volume was 15.38 cm3 (±6.83 cm3). The minimum volume was 5.4 cm3 and the maximum was 30.8 cm3. In a bilateral comparison of the right and left volume of the same individual, there were no significant differences (P = 0.353). In relation to the morphology of the MSs, the most prevalent was pyramidal with a square base with a prevalence of 66.7%. Related to gender, significant differences were observed only for the left volume (P = 0.009), with the mean volume being significantly greater in the men (19.69 cm3) than in the women (12.28 cm3). CONCLUSION: 3D printing of the MS permitted the more precise observation of anatomical features that cannot be seen on a 2D screen. A classification is presented that allows an analysis of sinus morphology, although it is necessary to conduct studies with larger samples to obtain more conclusive results.

Protein release kinetics for core-shell hybrid nanoparticles based on the layer-by-layer assembly of alginate and chitosan on liposomes.

The present work is focused on the formulation of core-shell nanoparticles via the layer-by-layer (L-b-L) self-assembly technique for delivery of biomacromolecules such as bone growth factors. The drug encapsulation efficiency of liposomes is enhanced with the increased stability of polyelectrolyte systems achieved through the alternate adsorption of several layers of natural polymers: anionic alginate and cationic chitosan on cationic nanosized phospholipid vesicles. The resulting particles were characterized for their size, surface charge, morphology, encapsulation efficiency, loading capacity and release kinetics over an extended period of 30 days. The L-b-L deposition technique succeeded in building a spherical, monodisperse and stable hybrid nanoparticulate protein delivery system with a cumulative size of 383+/-11.5 nm and zeta potential surface charge of 44.61+/-3.31 mV for five bilayered liposomes. The system offers numerous compartments for encapsulation including the aqueous core and within the polyelectrolyte shell demonstrating good entrapment and sustained linear release of a model protein, bovine serum albumin, in vitro. Our results demonstrate that this delivery system features an extended shelf life and can be loaded immediately prior to administration, thus preventing any loss of the protein.

Nonmotile Single-Cell Migration as a Random Walk in Nonuniformity: The "Extreme Dumping Limit" for Cell-to-Cell Communications.

In the present work, we model single-cell movement as a random walk in an external potential observed within the extreme dumping limit, which we define herein as the extreme nonuniform behavior observed for cell responses and cell-to-cell communications. Starting from the Newton-Langevin equation of motion, we solve the corresponding Fokker-Planck equation to compute higher moments of the displacement of the cell, and then we build certain quantities that can be measurable experimentally. We show that, each time, the dynamics depend on the external force applied, leading to predictions distinct from the standard results of a free Brownian particle. Our findings demonstrate that cell migration viewed as a stochastic process is still compatible with biological and experimental observations without the need to rely on more complicated or sophisticated models proposed previously in the literature.

The 3 R's for Platelet-Rich Fibrin: A "Super" Tri-Dimensional Biomaterial for Contemporary Naturally-Guided Oro-Maxillo-Facial Soft and Hard Tissue Repair, Reconstruction and Regeneration.

Platelet-Rich fibrin (PRF) is a three-dimensional (3-D) autogenous biomaterial obtained via simple and rapid centrifugation from the patient's whole blood samples, without including anti-coagulants, bovine thrombin, additives, or any gelifying agents. At the moment, it is safe to say that in oral and maxillofacial surgery, PRFs (particularly, the pure platelet-rich fibrin or P-PRF and leukocyte and platelet-rich fibrin or L-PRF sub-families) are receiving the most attention, essentially because of their simplicity, cost-effectiveness, and user-friendliness/malleability; they are a fairly new "revolutionary" step in second-generation therapies based on platelet concentration, indeed. Yet, the clinical effectiveness of such surgical adjuvants or regenerative platelet concentrate-based preparations continues to be highly debatable, primarily as a result of preparation protocol variability, limited evidence-based clinical literature, and/or poor understanding of bio-components and clinico-mechanical properties. To provide a practical update on the application of PRFs during oral surgery procedures, this critical review focuses on evidence obtained from human randomized and controlled clinical trials only. The aim is to serve the reader with current information on the clinical potential, limitations, challenges, and prospects of PRFs. Accordingly, reports often associate autologous PRFs with early bone formation and maturation; accelerated soft-tissue healing; and reduced post-surgical edema, pain, and discomfort. An advanced and original tool in regenerative dentistry, PRFs present a strong alternative and presumably cost-effective biomaterial for oro-maxillo-facial tissue (soft and hard) repair and regeneration. Yet, preparation protocols continue to be a source of confusion, thereby requiring revision and standardization. Moreover, to increase the validity, comprehension, and therapeutic potential of the reported findings or observations, a decent analysis of the mechanico-rheological properties, bio-components, and their bioactive function is eagerly needed and awaited; afterwards, the field can progress toward a brand-new era of "super" oro-dental biomaterials and bioscaffolds for use in oral and maxillofacial tissue repair and regeneration, and beyond.

Anatomical Conditions in Simultaneous Orthognathic Surgery and Structural Rhinoplasty. A Clinical Series / Condiciones Anatómicas en Cirugía Ortognática y Rinoplastia Estructural Simultanea. Una Seria Clínica

SUMMARY: Orthognathic surgery and rhinoplasty show synergy in terms of function and aesthetic results. The aim of this research is to analyze variables related to simultaneous orthognathic surgery and rhinoplasty and to discuss the surgical sequence. Male and female subjects between 18 and 45 years old were included in this research. Diagnosis related to nasal morphology (nasal tip bifid, rotate, square and others as well as the alae morphology and columella), facial deformity (sagittal and vertical deformity), type of surgery (rhinoplasty techniques and orthognathic techniques) and complications were included. The minimum follow-up was 12 months; Chi- Square and t test were used to define correlations, considering a value of p<0.05 for statistical significance. Class III facial deformity was observed in 40 % of subjects and class II facial deformity was present in 43 %. For the nasal deformities, the tip and nasal bridge were most prevalent; primary nasal deformity was observed in the 83 % of subjects and was significant more than secondary nasal deformity (p=0.042). Bimaxillary surgery was performed in 31 cases (88 %). In 10 cases a change of the original plan for rhinoplasty due to previous maxillary surgery was realized, mainly in class III facial deformity, with no statistical differences. Revision rhinoplasty was realized in 5 cases (14 %) and was not related to surgical variables; revision for orthognathic surgery was not necessary in this series. Rhinoplasty and orthognathic surgery simultaneously show low complications and predictable results. We can conclude that maxillary mandibular osteotomies and rhinoplasty could be performed safely. However, larger studies are necessary to understand the best choice and variables involved in simultaneous procedures and soft tissue response.

La cirugía ortognática y la rinoplastia muestran sinergia en términos de resultados funcionales y estéticos. EL objetivo de esta investigación es analizar variables relacionadas con la cirugía ortognática y rinoplastia ejecutada de forma simultanea. Fueron incluidos hombres y mujeres entre 18 y 45 años de edad. EL diagnóstico fue en base a la morfología nasal (punta bífida, rotada, cuadrada u otras así como alteraciones del ala nasal y columela), deformidad facial (deformidad sagital y vertical), tipo de cirugía (técnica de rinoplastia y cirugía ortognática) y complicaciones asociadas. El seguimiento mínimo fue de 12 meses; se utilizo las prueba t test y chi cuadrado para definir relaciones estadísticas considerando un valor de p< 0,05 para obtener diferencias significativas. La deformidad clase III fue observada en el 40 % de los sujetos y la deformidad facial de clase II se presento en el 43 %. Para la deformidad nasal, las alteraciones de a punta nasal y nasal fueron mas prevalentes; la deformidad nasal primaria se presentó en el 83 % de los sujetos y fue significativamente mayor que la deformidad nasal secundaria (p=0,042). La cirugía bimaxilar se realizó en 31 casos (88 %); en 10 casos se realizó el cambio del plan quirúrgico inicial de la rinoplastia debido a cambios generados en la cirugía maxilar previa, mayormente en deformidad facial de clase III, sin presentar diferencias significativas. La rinoplastia de revisión fue realizada en 5 casos (14 %) y no fue relacionada con ninguna variable de tipo quirúrgica; la revisión de cirugía ortognática no fue realizada en ningún caso de esta serie. La rinoplastia y la cirugía ortognática simultanea mostraron bajas complicaciones y resultados predecibles. Se puede concluir que la osteotomía maxilo mandibular y la rinoplastia son seguras; sin embargo, estudios de mayor volumen son necesarios para entender la mejor opción y variables relacionadas con procedimientos simultáneos y la respuesta de tejidos blandos faciales.

Cambios en la vía aérea después de cirugía ortognática bimaxilar / Airway change after bimaxillary orthognathic surgery

RESUMEN: La cirugía ortognática se realiza en sujetos con algún tipo de alteración esqueletal. Los movimientos maxilo mandibulares tienen impacto en la vía aérea (VA) y este aspecto se debe incorporar en la planificación quirúrgica. El objetivo de esta investigación fue determinar los cambios generados en la VA después de realizada la cirugía ortognática. Se realizó un estudio piloto incluyendo 51 sujetos con deformidad facial de clase II y clase III; se incluyeron en base al estudio del ángulo ANB y el tipo de oclusión dentaria. Se realizaron estudios con tomografía de haz cónico identificando el volumen máximo en la vía área y las áreas mínimas y máximas; además se incluyó la posición del hueso hioide y la inclinación del plano mandibular para relacionar con la morfología de la VA; para definir significancia estadística se estableció un valor de p<0,05 incluyendo las pruebas T de student y T test. Los resultados indicaron que los sujetos clase II aumentaron significativamente el volumen y áreas máximas y mínimas de la VA; los sujetos de clase III esqueletal no presentaron diferencias significativas entre la etapa pre y post quirúrgica; el hueso hioides se presentó significativamente más anterior en ambos en casos de clase II y clase III. Es posible concluir que la VA mejora sustancialmente en sujetos con clase esqueletal facial tipo II y que se mantiene sin cambios en sujetos con clase facial tipo III.

SUMMARY: Orthognathic surgery is performed in subjects with some type of skeletal alteration. Maxillomandibular movements have an impact on the airway (AW) and this aspect must be included into surgical planning. The aim of this research is to determine the changes in the AW after orthognathic surgery. A pilot study was conducted including 51 subjects with class II and class III facial deformity; they were included using the ANB angle and the type of dental occlusion. Cone beam computed tomography were performed showing the maximum volume in the airway and the minimum and maximum areas; in addition, the position of the hyoid bone and the angle of the mandibular plane were included to relate it to the morphology of the AW; to define statistical significance, a value of p<0.05 was established, including the student's t-test and the t-test. The results showed that class II subjects significantly increased the volume and maximum and minimum areas of the AW; skeletal class III subjects did not presented significant differences between the pre- and post-surgical stage; the hyoid bone was in an anterior position in both class II and class III cases. It is possible to conclude that AW improves substantially in subjects with facial class II and remains unchanged in subjects with facial class III.

Surface functionalization of nanobiomaterials for application in stem cell culture, tissue engineering, and regenerative medicine.

Stem cell-based approaches offer great application potential in tissue engineering and regenerative medicine owing to their ability of sensing the microenvironment and respond accordingly (dynamic behavior). Recently, the combination of nanobiomaterials with stem cells has paved a great way for further exploration. Nanobiomaterials with engineered surfaces could mimic the native microenvironment to which the seeded stem cells could adhere and migrate. Surface functionalized nanobiomaterial-based scaffolds could then be used to regulate or control the cellular functions to culture stem cells and regenerate damaged tissues or organs. Therefore, controlling the interactions between nanobiomaterials and stem cells is a critical factor. However, surface functionalization or modification techniques has provided an alternative approach for tailoring the nanobiomaterials surface in accordance to the physiological surrounding of a living cells; thereby, enhancing the structural and functional properties of the engineered tissues and organs. Currently, there are a variety of methods and technologies available to modify the surface of biomaterials according to the specific cell or tissue properties to be regenerated. This review highlights the trends in surface modification techniques for nanobiomaterials and the biological relevance in stem cell-based tissue engineering and regenerative medicine. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:554-567, 2016.