Nanoscale Investigation into Dynamics of Thin Liquid Films during Bouncing and Attachment of Rising Air Bubbles on Hydrophilic and Hydrophobic Surfaces.

Investigations on bouncing and attachment of free-rising air bubbles on hydrophobic surfaces have been limited to side-view, high-speed photography of the bubble-plate attachment process. In this work, an investigation of the dynamics as well as stability of thin liquid films (TLFs) between free-rising air bubbles and quartz surfaces was performed using a newly developed multiple-wavelength synchronized reflection interferometry microscopy (SRIM) technique. The effect of surface hydrophobicity on both the stability and critical rupture thickness of TLFs was investigated. Results showed that the TLF ruptured at a critical rupture thickness of 100-1000 nm or beyond during bubble's impact on hydrophobic quartz surfaces. The critical rupture thicknesses varied depending on the surface hydrophobicity as well as surface asperity. A higher surface hydrophobicity, in general, contributed to a higher critical rupture thickness. In addition, the effect of n-octanol on the stability of the TLFs was investigated. Results showed that film stability increased with increasing the concentration of n-octanol, which was accompanied by a significant decrease in the critical rupture thickness. The present result illustrates, for the first time, the dynamics of TLFs on hydrophobic surfaces under a dynamic condition compared with previous studies under a quasi-equilibrium condition. The information revealed from the present work has a significant implication to many industrial applications, including froth flotation and other biological and semiconductor applications.

Evaluation of the Canal Transportation Following Glide Path Preparation with Different Rotary Systems: A Comparative Study.

Objectives: Ideal root canal shaping might be more challenging particularly in cases with severely curved canals or complex anatomical variations. Glide path preparation is suggested as a critical step to achieve ideal canal preparation. The present study is aimed at evaluating transportation at different levels of the canal following glide path preparation by five different path finders. Materials and Methods: The study was conducted on 100 S-shaped canal simulator blocks. Glide path was prepared in five groups including (1) Scout RaCe (#10 and #15, 0.02), (2) One G (#14, 0.03), (3) PathFile (#13 and #16, 0.02), (4) GPS (#15, 0.03), and (5) K file (#15, 0.02) (Control group). The first four groups were NiTi rotary instruments, while the last group was a stainless steel hand file. The aforementioned files were used after canal negotiation by a #10 stainless steel hand file. Before- and after-preparation photos were taken and were superimposed in Adobe PhotoShop CC 2019. Transportation measurements were conducted in Digimizer. Absolute canal transportation was calculated at 10 cross-sections. Intergroup and intragroup data analysis were conducted using one-way and repeated measures ANOVA tests, respectively, in SPSS 26.0. The significance level was set to 0.05. Results: Although K file led to significantly more transportation in the apical and middle thirds (p < 0.001), rotary groups were not statistically different. In the coronal third, K files led to significantly more transportation compared to Scout RaCe and PathFile (p < 0.05). Conclusion: Within the limitations of the present study, regardless of the recruited rotary system, glide path preparation using NiTi rotary instruments leads to less canal transportation compared to stainless steel hand files.

Broken Instrument Removal Methods with a Minireview of the Literature.

Instrument fracture in the root canal system is an unpleasant incident that may occur during root canal treatment. Comprehensive cleaning of the root canal system is often impossible in the presence of a broken instrument. Therefore, it is often imperative to remove the broken fragment from the root canal system. To date, various methods have been proposed for the removal of broken instruments from the root canal system. However, no consensus has been reached on a safe technique with a high success rate for broken instrument removal. This case series reports six cases of successful removal of broken instruments using different methods including the ultrasonic, tube-and-glue, tube-and-wire, tube-and-internal shaft, and the forceps techniques and also provides a brief review of the relevant literature.

Injectable soft tissue filler infection with a similar appearance to an odontogenic abscess.

Infection of an injectable soft tissue filler may involve fascial spaces and appears similar to an odontogenic abscess. This case report addresses a 32-year-old female patient with facial swelling who was referred to the department of endodontics for the treatment of a suspected odontogenic infection.

Evaluation of the Effectiveness of Laser-Assisted Bleaching of the Teeth Discolored due to Regenerative Endodontic Treatment.

Regenerative endodontic treatments (RETs) as a valuable treatment option to save the immature necrotic teeth, have been reported to be associated with discoloration which is an inevitable unfavorable outcome. The present study aimed to compare three laser-assisted protocols with conventional walking bleaching in terms of bleaching efficacy. Seventy-two human incisor teeth underwent regenerative treatment. A triple antibiotic paste containing minocycline, ciprofloxacin, and metronidazole was used as an intracanal medicament. A human blood clot was applied as a scaffold and capped by a hydraulic calcium silicate-based cement. Ten weeks after the RET procedure, a four-session bleaching course started. Teeth were assigned to four groups: (1) 35% hydrogen peroxide gel, (2) 35% hydrogen peroxide gel + Nd: YAG laser, (3) 35% hydrogen peroxide gel + 980 nm diode laser, and (4) 35% hydrogen peroxide gel + 810 nm diode laser. The color changes (ΔE) were measured before and after bleaching sessions. The data were analyzed using Kruskal-Wallis nonparametric test. The statistical significance level was set at 0.05. Significant discoloration, exceeding the perceptibility threshold (ΔE > 3.7) was observed in all of the samples ten weeks after RET. There was no significant difference between groups in terms of RET-induced discoloration values (p > 0.05). Bleaching either by using 35% hydrogen peroxide or 35% hydrogen peroxide activated by different lasers used in this study resulted in significant tooth whitening (p < 0.05). There was no statistically significant difference among the groups in terms of bleaching efficacy (p > 0.05). Internal bleaching by using 35% hydrogen peroxide is as effective as laser-assisted protocols for correction of crown discoloration in teeth that have undergone RET.

Evaluation of the Antibacterial Effect of Xylene, Chloroform, Eucalyptol, and Orange Oil on Enterococcus faecalis in Nonsurgical Root Canal Retreatment: An Ex Vivo Study.

Objectives: The present ex vivo study is aimed at evaluating the antibacterial efficacy of chloroform, eucalyptol, orange oil, and xylene against E. faecalis biofilm during nonsurgical root canal retreatment. Materials and Methods: Eighty single-rooted teeth were instrumented. The samples were autoclaved, infected with E. faecalis for 4 weeks, and obturated with gutta-percha. Then the teeth were randomly assigned to 4 groups (n = 20): (1) chloroform, (2) eucalyptol, (3) orange oil, and (4) xylene. In all of the groups, gutta-percha removal was conducted according to the same protocol although the solvent used in each group was different. Bacterial samples were collected after gutta-percha removal and following additional apical enlargement. Intergroup and intragroup analyses were conducted using one-way ANOVA combined with the post hoc Tukey test and the paired-sample t-test, respectively. Statistical significance was set to 0.05. Results: All of the groups showed more than 99% bacterial load reduction. The least bacterial load after gutta-percha removal was observed in the chloroform group (p < 0.001). The orange oil group showed a significantly lower bacterial load compared to the eucalyptol group (p = 0.001), while it was not different from the xylene group (p = 0.953). The xylene group also had a significantly lower bacterial load compared with the eucalyptol group (p = 0.017). After apical enlargement, the chloroform group had a significantly lower bacterial load compared to the other groups. The comparison of bacterial load values before and after apical enlargement in the chloroform and eucalyptol groups showed a statistically significant difference (p choloroform = 0.011, p eucalyptol = 0.001). Conclusion: Chloroform was the most effective solvent in terms of antimicrobial activity against E. faecalis followed by orange oil and xylene, which were not significantly different though, and eucalyptol. All of the solvents showed more than 99% bacterial load reduction. Chloroform and xylene revealed to be associated with favorable antibiofilm activity among the examined solvents.

Evaluation of Curved Canal Transportation Using the Neoniti Rotary System with Reciprocal Motion: A Comparative Study.

The ideal root canal preparation is where the original canal morphology is maintained during the biomechanical preparation. Preparation of curved canals has always been a challenge to clinicians. Better results have been suggested for a single NiTi instrument with reciprocating motion than the conventional continuous rotation method in the preparation of curved root canals. Although the Neoniti rotary system is not suggested to be used with reciprocal motion, running a pilot study, we found that it could be possible. The present study aimed to investigate if shaping curved canals using the Neoniti rotary system with reciprocal motion leads to better results in terms of root canal transportation. One hundred acrylic j-shape canal simulator endoblocks were used in this study. Five preparation sequences were applied: GPS followed by A1#20 (GPS + A1#20), GPS followed by A1#20 and then A1#25 (GPS + A1#20 + A1#25), GPS followed by A1#25 (GPS + A1#25), hand file followed by A1#20 (hand file + A1#20), and GPS followed by A1#20 (with reciprocal motion) (GPS + A1#20(reciprocal)). Pictures were taken from blocks once before and once after preparation from two dimensions. Before-and-after pictures were superimposed in Photoshop software. Measurements were performed in Digimizer. The number of autoreverses and pecking motions was recorded after reviewing the recorded videos. Data were analyzed in SPSS, version 26. A p value of less than 0.05 was considered statistically significant. The group GPS + A1#20 + A1#25 had more transportation compared with the others, at apical, middle, and coronal thirds not only in the frontal view but also in the lateral view. Other groups were not significantly different. The number of peckings and autoreverses was significantly less when A1#25 was used after GPS and A1#20. When A1#20 was used with reciprocal motion, it had less peckings compared with the same file with continuous rotation, and no autoreverses were observed in that group. Using Neoniti files with reciprocal motion might result in less instrument fatigue and favorable results, with respect to canal anatomy preservation. Using A1#20 before A1#25 also will decrease the stress on the instrument during preparation. However, this may lead to significantly more canal transportation.

Antibacterial nanofibers based on poly(l-lactide-co-d, l-lactide) and poly(vinyl alcohol) used in wound dressings potentially: a comparison between hybrid and blend properties.

Morphology, hydrophilicity, degradation, mechanical properties, drug release, bacterial resistance, and cell viability are indispensable parameters for a bioactive wound dressing. In this work, the aforementioned terms between hybrid and blend nanofibrous samples based on poly (L-lactide-co-D, L-lactide) (PLDLLA) and poly (vinyl alcohol) (PVA) containing triclosan (Tri) as an antibacterial drug were investigated. The FE-SEM images showed that the presence of Tri in the hybrid and blend samples led to bimodal, and unimodal diameter size distributions. The FTIR spectra revealed that the addition of PVA caused to shift the carbonyl bond of PLDLLA in the blend sample, and DSC thermograms exhibited the immiscibility of PVA and PLDLLA polymers in the blend. Moreover, the hybrid sample showed higher hydrophilicity with water contact angle (WCA) of 53[Formula: see text] than the blend ones with WCA of 73[Formula: see text] which proved by water up-take test. In the following, the antibacterial evaluation showed better results for hybrid-Tri with the maximum growth inhibitory zones of 35 mm and 48 mm for E. coli and S. aureus, respectively. On the other hand, the hybrid nanofibrous sample showed remarkable mechanical properties (tensile stress ∼19 MPa, and Young's modulus ∼532 MPa). Finally, the SNL 76/7 fibroblast cell line culture confirmed that the hybrid-Tri nanofibrous sample had better proliferation performance than the blend-Tri sample because of the minimal cytotoxicity and maximal cell viability by MTT and acridine orange/ethidium bromide staining.