Hollow Octadecameric Self-Assembly of Collagen-like Peptides.

The folding of collagen is a hierarchical process that starts with three peptides associating into the characteristic triple helical fold. Depending on the specific collagen in question, these triple helices then assemble into bundles reminiscent of α-helical coiled-coils. Unlike α-helices, however, the bundling of collagen triple helices is very poorly understood with almost no direct experimental data available. In order to shed light on this critical step of collagen hierarchical assembly, we have examined the collagenous region of complement component 1q. Thirteen synthetic peptides were prepared to dissect the critical regions allowing for its octadecameric self-assembly. We find that short peptides (under 40 amino acids) are able to self-assemble into specific (ABC)6 octadecamers. This requires the ABC heterotrimeric composition as the self-assembly subunit, but does not require disulfide bonds. Self-assembly into this octadecamer is aided by short noncollagenous sequences at the N-terminus, although they are not entirely required. The mechanism of self-assembly appears to begin with the very slow formation of the ABC heterotrimeric helix, followed by rapid bundling of triple helices into progressively larger oligomers, terminating in the formation of the (ABC)6 octadecamer. Cryo-electron microscopy reveals the (ABC)6 assembly as a remarkable, hollow, crown-like structure with an open channel approximately 18 Å at the narrow end and 30 Å at the wide end. This work helps to illuminate the structure and assembly mechanism of a critical protein in the innate immune system and lays the groundwork for the de novo design of higher order collagen mimetic peptide assemblies.

Dynamic Imine Bonding Facilitates Mannan Release from a Nanofibrous Peptide Hydrogel.

Recently, there has been increased interest in using mannan as an immunomodulatory bioconjugate. Despite notable immunological and functional differences between the reduced (R-Man) and oxidized (O-Man) forms of mannan, little is known about the impact of mannan oxidation state on its in vivo persistence or its potential controlled release from biomaterials that may improve immunotherapeutic or prophylactic efficacy. Here, we investigate the impact of oxidation state on the in vitro and in vivo release of mannan from a biocompatible and immunostimulatory multidomain peptide hydrogel, K2(SL)6K2 (abbreviated as K2), that has been previously used for the controlled release of protein and small molecule payloads. We observed that O-Man released more slowly from K2 hydrogels in vitro than R-Man. In vivo, the clearance of O-Man from K2 hydrogels was slower than O-Man alone. We attributed the slower release rate to the formation of dynamic imine bonds between reactive aldehyde groups on O-Man and the lysine residues on K2. This imine interaction was also observed to improve K2 + O-Man hydrogel strength and shear recovery without significantly influencing secondary structure or peptide nanofiber formation. There were no observed differences in the in vivo release rates of O-Man loaded in K2, R-Man loaded in K2, and R-Man alone. These data suggest that, after subcutaneous injection, R-Man naturally persists longer in vivo than O-Man and minimally interacts with the peptide hydrogel. These results highlight a potentially critical, but previously unreported, difference in the in vivo behavior of O-Man and R-Man and demonstrate that K2 can be used to normalize the release of O-Man to that of R-Man. Further, since K2 itself is an adjuvant, a combination of O-Man and K2 could be used to enhance the immunostimulatory effects of O-Man for applications such as infectious disease vaccines and cancer immunotherapy.

Orthogonal Self-Assembly of Amphiphilic Peptide Hydrogels and Liposomes Results in Composite Materials with Tunable Release Profiles.

Self-assembled nanomaterials are promising candidates for drug delivery by providing a higher degree of spatiotemporal control compared to free drugs. However, challenges such as burst release, inadequate targeting, and drug-nanomaterial incompatibility leave room for improvement. The combination of orthogonal self-assembling systems can result in more useful materials that improve upon these weaknesses. In this work, we investigate an orthogonal self-assembling system of nanofibrous MultiDomain Peptide (MDP) hydrogels encapsulating liposomes. Both positively charged and negatively charged MDPs were prepared and mixed with positively charged, negatively charged, or zwitterionic liposomes for a total of six composites. We demonstrate that, despite both systems being amphiphilic, they are able to mix while retaining their independent identities. We show that changing the charge of either liposomes or MDPs does not hinder the self-assembly of either system or significantly affect their rheological properties. In all six cases, small molecules encapsulated in liposome-MDP composites resulted in slower release than was possible in MDP hydrogels alone. However, in one case, positively charged MDPs destabilized negatively charged liposomes and resulted in a unique release profile. Finally, we show that MDP hydrogels substantially decrease the release of chemotherapeutic doxorubicin from its liposomal formulation, Doxil, for 24 h. This work demonstrates the chemical compatibility of amphiphilic, orthogonally self-assembled systems and the range of their drug-delivering capabilities.

Stabilization of Synthetic Collagen Triple Helices: Charge Pairs and Covalent Capture.

Collagen mimetic peptides are composed of triple helices. Triple helical formation frequently utilizes charge pair interactions to direct protein assembly. The design of synthetic triple helices is challenging due to the large number of competing species and the overall fragile nature of collagen mimetics. A successfully designed triple helix incorporates both positive and negative criteria to achieve maximum specificity of the supramolecular assembly. Intrahelical charge pair interactions, particularly those involved in lysine-aspartate and lysine-glutamate pairs, have been especially successful both in driving helix specificity and for subsequent stabilization by covalent capture. Despite this progress, the important sequential and geometric relationships of charged residues in a triple helical context have not been fully explored for either supramolecular assembly or covalent capture stabilization. In this study, we compare the eight canonical axial and lateral charge pairs of lysine and arginine with glutamate and aspartate to their noncanonical, reversed charge pairs. These findings are put into the context of collagen triple helical design and synthesis.

Chain alignment of collagen I deciphered using computationally designed heterotrimers.

The most abundant member of the collagen protein family, collagen I (also known as type I collagen; COL1), is composed of one unique (chain B) and two similar (chain A) polypeptides that self-assemble with one amino acid offset into a heterotrimeric triple helix. Given the offset, chain B can occupy either the leading (BAA), middle (ABA) or trailing (AAB) position of the triple helix, yielding three isomeric biomacromolecules with different protein recognition properties. Despite five decades of intensive research, there is no consensus on the position of chain B in COL1. Here, three triple-helical heterotrimers that each contain a putative von Willebrand factor (VWF) and discoidin domain receptor (DDR) recognition sequence from COL1 were designed with chain B permutated in all three positions. AAB demonstrated a strong preference for both VWF and DDR, and also induced higher levels of cellular DDR phosphorylation. Thus, we resolve this long-standing mystery and show that COL1 adopts an AAB register.

Recent Advances in Collagen Mimetic Peptide Structure and Design.

Collagen mimetic peptides (CMPs) fold into a polyproline type II triple helix, allowing the study of the structure and function (or misfunction) of the collagen family of proteins. This Perspective will focus on recent developments in the use of CMPs toward understanding the structure and controlling the stability of the triple helix. Triple helix assembly is influenced by various factors, including the single amino acid propensity for the triple helix fold, pairwise interactions between these amino acids, and long-range effects observed across the helix, such as bend, twist, and fraying. Important progress in creating a comprehensive and predictive understanding of these factors for peptides with exclusively natural amino acids has been made. In contrast, several groups have successfully developed unnatural amino acids that are engineered to stabilize the triple helical structure. A third approach to controlling the triple helical structure includes covalent cross-linking of the triple helix to stabilize the assembly, which eliminates the problematic equilibrium of unfolding into monomers and enforces compositional control. Advances in all these areas have resulted in significant improvements to our understanding and control of this important class of protein, allowing for the design and application of more chemically complex and well-controlled collagen mimetic biomaterials.

Covalent Capture of a Collagen Mimetic Peptide with an Integrin-Binding Motif.

Collagen mimetic peptides (CMPs) are an excellent model to study the structural and biological properties of the extracellular matrix (ECM) due to ease of synthesis and variability in sequence. To ensure that synthetic materials accurately mimic the structure and function of natural collagen in the ECM, it is necessary to conserve the triple helix. However, CMP folding is subject to equilibrium, and frequently peptides exist in solution as both monomer and triple helix. Additionally, the stability of CMPs is highly dependent on peptide length and amino acid composition, leading to suboptimal performance. Here, we report the utility of covalent capture, a method to (a) direct the folding of a supramolecular triple helix and (b) form isopeptide bonds between the helix strands, in the design of an integrin-binding peptide with a GFOGER motif. Covalent capture effectively locked the triple helix and yielded a peptide with high thermal stability and a rapid folding rate. Compared to supramolecular triple helices bearing the same GFOGER-binding site, cell adhesion was substantially increased. In vitro assays using EDTA/Mg2+ and an anti-α2ß1 antibody demonstrated the preservation of the high specificity of the binding event. This covalently captured integrin-binding peptide provides a template for the future design of bioactive ECM mimics, which can overcome limitations of supramolecular approaches for potential drug and biomaterial designs.

Cation-π Interactions and Their Role in Assembling Collagen Triple Helices.

Cation-π interactions play a significant role in the stabilization of globular proteins. However, their role in collagen triple helices is less well understood and they have rarely been used in de novo designed collagen mimetic systems. In this study, we analyze the stabilizing and destabilizing effects in pairwise amino acid interactions between cationic and aromatic residues in both axial and lateral sequential relationships. Thermal unfolding experiments demonstrated that only axial pairs are stabilizing, while the lateral pairs are uniformly destabilizing. Molecular dynamics simulations show that pairs with an axial relationship can achieve a near-ideal interaction distance, but pairs in a lateral relationship do not. Arginine-π systems were found to be more stabilizing than lysine-π and histidine-π. Arginine-π interactions were then studied in more chemically diverse ABC-type heterotrimeric helices, where arginine-tyrosine pairs were found to form the best helix. This work helps elucidate the role of cation-π interactions in triple helices and illustrates their utility in designing collagen mimetic peptides.

Charge-Free, Stabilizing Amide-π Interactions Can Be Used to Control Collagen Triple-Helix Self-Assembly.

There is a noted lack of understood, controllable interactions for directing the organization of collagen triple helices. While the field has had success using charge-pair interactions and cation-π interactions in helix design, these alone are not adequate for achieving the degree of specificity desirable for these supramolecular structures. Furthermore, because of the reliance on electrostatic interactions, designed heterotrimeric systems have been heavily charged, a property undesirable in some applications. Amide-π interactions are a comparatively understudied class of charge-free interactions, which could potentially be harnessed for triple-helix design. Herein, we propose, validate, and utilize pairwise amino acid amide-π interactions in collagen triple-helix design. Glutamine-phenylalanine pairs, when arranged in an axial geometry, are found to exhibit a moderately stabilizing effect, while in the lateral geometry, this pair is destabilizing. Together this allows glutamine-phenylalanine pairs to effectively set the register of triple helices. In contrast, interactions between asparagine and phenylalanine appear to have little effect on triple-helical stability. After deconvoluting the contributions of these amino acids to triple-helix stability, we demonstrate these new glutamine-phenylalanine interactions in the successful design of a heterotrimeric triple helix. The results of all of these analyses are used to update our collagen triple-helix thermal stability prediction algorithm, Scoring function for Collagen Emulating Peptides' Temperature of Transition (SCEPTTr).

Covalent Capture of Collagen Triple Helices Using Lysine-Aspartate and Lysine-Glutamate Pairs.

Collagen mimetic peptides (CMPs) self-assemble into a triple helix reproducing the most fundamental aspect of the collagen structural hierarchy. They are therefore important for both further understanding this complex family of proteins and use in a wide range of biomaterials and biomedical applications. CMP self-assembly is complicated by a number of factors which limit the use of CMPs including their slow rate of folding, relatively poor monomer-trimer equilibrium, and the large number of competing species possible in heterotrimeric helices. All of these problems can be solved through the formation of isopeptide bonds between lysine and either aspartate or glutamate. These amino acids serve two purposes: they first direct self-assemble, allowing for composition and register control within the triple helix, and subsequently can be covalently linked, fixing the composition and register of the assembled structure without perturbing the triple helical conformation. This self-assembly and covalent capture are demonstrated here with four different triple helices. The formation of an isopeptide bond between lysine and glutamate (K-E) is shown to be a faster and higher yielding reaction than lysine with aspartate (K-D). Additionally, K-E amide bonds increase the thermal stability, improve the refolding capabilities, and enhance the triple helical structure as compared to K-E supramolecular interactions, observed by circular dichroism. In contrast, covalent capture of triple helices with K-D amide bonds occurs slower, and the captured triple helices do not have enhanced helical structure. The crystal structure of a triple helix captured through the formation of three K-E isopeptide bonds unequivocally demonstrates the connectivity of the amide bonds formed while also confirming the preservation of the canonical triple helix. The rate of reaction and yield for covalently captured K-E triple helices along with the excellent preservation of triple helical structure demonstrate that this approach can be used to effectively capture and stabilize this important biological motif for biological and biomedical applications.

Self-Assembling Multidomain Peptide Nanofibers for Delivery of Bioactive Molecules and Tissue Regeneration.

Multidomain peptides (MDPs) are a class of self-assembling peptides that are organized in a ß-sheet motif, resulting in a nanofibrous architecture. This structure is stabilized by hydrophobic packing in the fiber core and a hydrogen-bonding network down the fiber long axis. Under easily controllable conditions, regulated by electrostatic interactions between the peptides and the pH and salt composition of the solvent, the nanofiber length can be dramatically extended, resulting in fiber entanglement and hydrogel formation. One of the chief strengths of this supramolecular material is that the design criteria governing its structure and assembly are robust and permit a wide range of modifications without disruption. This allows the MDPs to be tailored to suit a wide range of applications, particularly in biomedical engineering. For example, delivery of small molecules, proteins, and cells is easily achievable. These materials can be trapped within the matrices of the hydrogel or trapped within the hydrophobic core of the nanofiber, depending on the cargo and the design of the MDP. Interactions between the nanofibers and their cargo can be tailored to alter the release profile, and in the most sophisticated cases, different cargos can be released in a cascading time-dependent fashion. The MDP hydrogel and its cargo can be targeted to specific locations, as the thixotropic nature of the hydrogel allows it to be easily aspirated into a syringe and then delivered from a narrow-bore needle. The sequence of amino acids making up the MDP can also be modified to permit cross-linking or enzymatic degradation. Selection of sequences with or without these modifications allows one to control the rate of degradation in vivo from as rapidly as 1 week to well over 6 weeks as the MDP nanofibers are degraded to their amino acid components. MDP sequences can also be modified to add biomimetic sequences derived from growth factors and other signaling proteins. These chemical signals are displayed at a very high density on the fibers' surface, where they contribute to the modification of cellular behavior. We have used this approach to drive blood vessel formation, which is critical for tissue regeneration generally and more specifically for the treatment of diseases related to poor blood flow. MDPs represent an ideal case of bottom-up design where control of chemical structure leads to control of self-assembly and nanostructure and thereby control of material properties that collectively can control biological function.

Covalent Capture of Aligned Self-Assembling Nanofibers.

A great deal of effort has been invested in the design and characterization of systems which spontaneously assemble into nanofibers. These systems are interesting for their fundamental supramolecular chemistry and have also been shown to be promising materials, particularly for biomedical applications. Multidomain peptides are one such assembler, and in previous work we have demonstrated the reversibility of their assembly under mild and easily controlled conditions, along with their utility for time-controlled drug delivery, protein delivery, cell encapsulation, and cell delivery applications. Additionally, their highly compliant criteria for sequence selection allows them to be modified to incorporate protease susceptibility and biological-recognition motifs for cell adhesion and angiogenesis. However, control of their assembly has been limited to the formation of disorganized nanofibers. In this work, we expand our ability to manipulate multidomain-peptide assembly into parallel-aligned fiber bundles. Albeit this alignment is achieved by the shearing forces of syringe delivery, it is also dependent on the amino acid sequence of the multidomain peptide. The incorporation of the amino acid DOPA (3,4-dihydroxyphenylalanine) allows the self-assembled nanofibers to form an anisotropic hydrogel string under modest shear stress. The hydrogel string shows remarkable birefringence, and highly aligned nanofibers are visible in scanning electronic microscopy. Furthermore, the covalent linkage induced by DOPA oxidation allows covalent capture of the aligned nanofiber bundles, enhancing their birefringence and structural integrity.

Control of Collagen Triple Helix Stability by Phosphorylation.

The phosphorylation of the collagen triple helix plays an important role in collagen synthesis, assembly, signaling, and immune response, although no reports detailing the effect this modification has on the structure and stability of the triple helix exist. Here we investigate the changes in stability and structure resulting from the phosphorylation of collagen. Additionally, the formation of pairwise interactions between phosphorylated residues and lysine is examined. In all tested cases, phosphorylation increases helix stability. When charged-pair interactions are possible, stabilization via phosphorylation can play a very large role, resulting inasmuch as a 13.0 °C increase in triple helix stability. Two-dimensional NMR and molecular modeling are used to study the local structure of the triple helix. Our results suggest a mechanism of action for phosphorylation in the regulation of collagen and also expand upon our understanding of pairwise amino acid stabilization of the collagen triple helix.

Glycine Substitutions in Collagen Heterotrimers Alter Triple Helical Assembly.

Osteogenesis imperfecta typically results from missense mutations in the collagen genome where the required glycine residues are replaced with another amino acid. Many models have attempted to replicate the structure of mutated collagen on the triple helix level. However, composition and register control of the triple helix is complicated and requires extreme precision, especially when these destabilizing mutations are present. Here we present mutations to a composition- and register-controlled AAB helix where one of the requisite glycines in the A chain of the triple helix is changed to serine or alanine. We see a loss of compositional control when the A chain is mutated, resulting in an A'BB composition that minimizes the number of mutations included in the triple helix. However, when both A and B chains are mutated and no nonmutated peptide chains are available, the designed A'A'B' composition is reestablished. Our work shows the ability of the mutations to influence and alter the composition and register of the collagen triple helix.

Synthetic, Register-Specific, AAB Heterotrimers to Investigate Single Point Glycine Mutations in Osteogenesis Imperfecta.

Osteogenesis imperfecta (OI) is a disease caused primarily by mutations of glycine in the standard (Xaa-Yaa-Gly)n repeat of a type I collagen triple helix. Type I collagen is an AAB heterotrimer which means that, depending on whether the A or B chain is mutated, the glycine substitution will appear once or twice. In this work we use designed axial charged pairs to self-assemble an AAB triple helix with controlled composition and register. We then substitute a single glycine of the B chain with alanine, serine, valine, aspartate, or arginine and assess the impact on the structure and folding of this OI mimic by CD, NMR, and restraint-guided modeling. We find that alanine and serine substitutions are tolerated, resulting in localized disruptions to the triple helix structure, while bulkier amino acids result in alternatively folded structures. This work demonstrates the potential of axial charged pairs to control the structure of low stability triple helices and also helps to elucidate the structure and folding challenges associated with OI-type mutations in collagen.

"Missing Tooth" Multidomain Peptide Nanofibers for Delivery of Small Molecule Drugs.

The clinical administration of many small molecule hydrophobic drugs is challenged by the insolubility of these drugs under physiological conditions. Because of this, the development of biocompatible scaffolds capable of effectively delivering hydrophobic drug molecules is of particular interest. Multidomain peptides (MDPs) provide biocompatible hydrogel scaffolds that are injectable and space-conforming, allowing for in situ delivery of a variety of drugs. Here we demonstrate that through manipulation of peptide primary sequence, a molecular cavity can be incorporated into the hydrophobic core of these peptide nanofibers allowing for encapsulation and delivery of small molecule drugs with poor water solubility. Using SN-38, daunorubicin, diflunisal, etodolac, levofloxacin, and norfloxacin, we demonstrate drug encapsulation and release from multidomain peptide fibers. Steady-state fluorescence and drug release studies show that hydrogels loaded with SN-38, diflunisal, and etodolac exhibit prolonged drug release profiles due to intrafibrillar drug encapsulation. This study establishes multidomain peptides as promising carriers for localized in situ delivery of small molecule drugs with poor water solubility.

Drug-triggered and cross-linked self-assembling nanofibrous hydrogels.

Self-assembly of multidomain peptides (MDP) can be tailored to carry payloads that modulate the extracellular environment. Controlled release of growth factors, cytokines, and small-molecule drugs allows for unique control of in vitro and in vivo responses. In this study, we demonstrate this process of ionic cross-linking of peptides using multivalent drugs to create hydrogels for sustained long-term delivery of drugs. Using phosphate, heparin, clodronate, trypan, and suramin, we demonstrate the utility of this strategy. Although all multivalent anions result in good hydrogel formation, demonstrating the generality of this approach, suramin led to the formation of the best hydrogels per unit concentration and was studied in greater detail. Suramin ionically cross-linked MDP into a fibrous meshwork as determined by scanning and transmission electron microscopy. We measured material storage and loss modulus using rheometry and showed a distinct increase in G' and G″ as a function of suramin concentration. Release of suramin from scaffolds was determined using UV spectroscopy and showed prolonged release over a 30 day period. Suramin bioavailability and function were demonstrated by attenuated M1 polarization of THP-1 cells compared to positive control. Overall, this design strategy has allowed for the development of a novel class of polymeric delivery vehicles with generally long-term release and, in the case of suramin, cross-linked hydrogels that can modulate cellular phenotype.

Comparative NMR analysis of collagen triple helix organization from N- to C-termini.

The collagen triple helix consists of three supercoiled solvent-exposed polypeptide chains, and by dry weight it is the most abundant fold in mammalian tissues. Many factors affecting the structure and stability of collagen have been determined through the use of short synthetically prepared peptides, generally called collagen-mimetic peptides (CMPs). NMR (nuclear magnetic resonance spectroscopy) investigations into the molecular structure of CMPs have suffered from large amounts of signal overlap and degeneracy because of collagen's repetitive primary sequence, the close and symmetric packing of the three chains and the identical peptide sequences found in homotrimers. In this paper a peptide library is prepared in which a single isotopic (15)N-Gly label is moved sequentially along the peptide backbone. Our approach allows for a more explicit examination of local topology than available in past reports. This reveals larger regions of disorder at the C-terminus than previously detected by crystallographic or NMR studies, and here C-terminal fraying is seen to extend for six amino acids in a (POG)10 sequence. Furthermore, small sequence changes at the N-terminus greatly influence the degree of this localized disorder and may be useful in the future design of CMPs to maximize collagen's interstrand hydrogen bonding pattern. Our approach and data serves as a reference for future CMP characterizations to determine the quality and extent of folding.

Rational design of a non-canonical "sticky-ended" collagen triple helix.

In a canonical collagen triple helix, three peptides self-assemble into a supercoiled motif with a one-amino-acid offset between the peptide chains. Design of triple helices that contain more than one residue offset is lucrative, as it leaves the non-covalent interactions unsatisfied at the termini and renders the termini "sticky" to further self-assemble into collagen-like nanofibers. Here we use lysine-glutamate axial salt-bridges to design a heterotrimeric collagen triple helix, ABC-1, containing a non-canonical offset of four residues between the peptide chains. The four-residue offset is necessary to prevent aggregation, which would prevent characterization of the non-canonical chain arrangement at the molecular level by NMR spectroscopy. A second heterotrimer, ABC-2, also stabilized by axial salt-bridges, is designed containing a canonical one-amino-acid offset to facilitate comparison of structure and stability by CD and NMR. ABC-1 and ABC-2 demonstrate our ability to modulate chain offset in a collagen triple helix. This lays the groundwork to design longer, and therefore stickier, offsets allowing access to a new class of collagen-related nanostructures.

Self-assembly of fiber-forming collagen mimetic peptides controlled by triple-helical nucleation.

Mimicking the multistep self-assembly of the fibrillar protein collagen is an important design challenge in biomimetic supramolecular chemistry. Utilizing the complementarity of oppositely charged domains in short collagen-like peptides, we have devised a strategy for the self-assembly of these peptides into fibers. The strategy depends on the formation of a staggered triple helical species facilitated by interchain charged pairs, and is inspired by similar sticky-ended fibrillation designs applied in DNA and coiled coil fibers. We compare two classes of collagen mimetic peptides with the same composition but different domain arrangements, and show that differences in their proposed nucleation events differentiates their fibrillation capabilities. Larger nucleation domains result in rapid fiber formation and eventual precipitation or gelation while short nucleation domains leave the peptide soluble for long periods of time. For one of the fiber-forming peptides, we elucidate the packing parameters by X-ray diffraction.