Mechanism of CO2 in promoting the hydrogenation of levulinic acid to γ-valerolactone catalyzed by RuCl3 in aqueous solution.

A Ru-containing complex shows good catalytic performance toward the hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) with the assistance of organic base ligands (OBLs) and CO2. Herein, we report the competitive mechanisms for the hydrogenation of LA to GVL, 4-oxopentanal (OT), and 2-methyltetrahydro-2,5-furandiol (MFD) with HCOOH or H2 as the H source catalyzed by RuCl3 in aqueous solution at the M06/def2-TZVP, 6-311++G(d,p) theoretical level. Kinetically, the hydrodehydration of LA to GVL is predominant, with OT and MFD as side products. With HCOOH as the H source, initially, the OBL (triethylamine, pyridine, or triphenylphosphine) is responsible for capturing H+ from HCOOH, leading to HCOO- and [HL]+. Next, the Ru3+ site is in charge of sieving H- from HCOO-, yielding [RuH]2+ hydride and CO2. Alternatively, with H2 as the H source, the OBL stimulates the heterolysis of H-H bond with the aid of Ru3+ active species, producing [RuH]2+ and [HL]+. Toward the [RuH]2+ formation, H2 as the H source exhibits higher activity than HCOOH as the H source in the presence of an OBL. Thereafter, H- in [RuH]2+ gets transferred to the unsaturated C site of ketone carbonyl in LA. Afterwards, the Ru3+ active species is capable of cleaving the C-OH bond in 4-hydroxyvaleric acid, yielding [RuOH]2+ hydroxide and GVL. Subsequently, CO2 promotes Ru-OH bond cleavage in [RuOH]2+, forming HCO3- and regenerating the Ru3+-active species owing to its Lewis acidity. Lastly, between the resultant HCO3- and [HL]+, a neutralization reaction occurs, generating H2O, CO2, and OBLs. Thus, the present study provides insights into the promotive roles of additives such as CO2 and OBLs in Ru-catalyzed hydrogenation.

Theoretical comparison of fructose with methylglucoside for the production of formate and levulinate catalyzed by Brønsted acids in a methanol solution.

For the conversion of fructose/methylglucoside (MG) into both methyl formate (MF) and methyl levulinate (MLev), the C-source of formate [HCOO]- remains unclear at the molecular level. Herein, reaction mechanisms catalyzed by [CH3OH2]+ in a methanol solution were theoretically investigated at the PBE0/6-311++G(d,p) level. For the conversion of fructose into MF and MLev, the formate [HCOO]- comes from the C1-atom of fructose, in which the rate-determining step lies in the reaction of 5-hydroxymethylfurfural (HMF) with CH3OH to yield MF and MLev. The reaction of fructose with CH3OH kinetically tends to generate HMF intermediates rather than yield (MF + MLev). When MG is dissolved in a methanol solution, its O2, O3, and O4 atoms are closer to the first layer of the solvent than O1, O5, and O6 atoms. For the dehydration of MG with methanol into MF and MLev, the formate [HCOO]- stems from the dominant C1- and secondary C3-atoms of MG. Kinetically, MG is ready to yield (MF + MLev), whereas fructose can induce the reaction to remain at the HMF intermediate, inhibiting the further conversion of HMF with CH3OH into MF and MLev. If MG isomerizes into fructose, the reaction will be more preferable for yielding HMF rather than (MF + MLev).

Coordination of sorbitol to Ga(OTf)3 in the liquid phase: an experimental and theoretical study.

In a solution of sorbitol (SBT) and Ga(OTf)3 compounds, the coordination of sorbitol (SBT) to [Ga(OTf)n]3-n (n = 0-3) has been investigated, using both ESI-MS spectra and density functional theory (DFT) calculations at the M06/6-311++g(d,p), aug-cc-pvtz level using a polarized continuum model (PCM-SMD). In sorbitol solution, the most stable conformer of sorbitol includes three intramolecular H-bonds, i.e., O2H⋯O4, O4H⋯O6, and O5H⋯O3. Through ESI-MS spectra, in a tetrahydrofuran solution of both SBT and Ga(OTf)3 compounds, five main species are observed, i.e., [Ga(SBT)]3+, [Ga(OTf)]2+, [Ga(SBT)2]3+, [Ga(OTf)(SBT)]2+, and [Ga(OTf)(SBT)2]2+. Through DFT calculations, in a solution of sorbitol (SBT) and Ga(OTf)3 compounds, the Ga3+ cation tends to form five six-coordination complexes, i.e., [Ga(η2O,O-OTf)3], [Ga(η3O2-O4-SBT)2]3+, [(η2O,O-OTf)Ga(η4O2-O5-SBT)]2+, [(η1O-OTf)(η2O2,O4-SBT)Ga(η3O3-O5-SBT)]2+, and [(η1O-OTf)(η2O,O-OTf)Ga(η3O3-O5-SBT)]+, which are in good agreement with the experimental observation of the ESI-MS spectra. For both [Ga(OTf)n]3-n (n = 1-3) and [Ga(SBT)m]3+ (m = 1, 2) complexes, the negative charge transfer from ligands to the Ga3+-center plays an important role in their stability, because of the strong polarization of the Ga3+ cation. For [Ga(OTf)n(SBT)m]3-n (n = 1, 2; m = 1, 2) complexes, the negative charge transfer from ligands to the Ga3+-center plays an essential role in their stability, accompanied by an electrostatic interaction between the Ga3+-center and ligands and/or spatial inclusion of ligands toward the Ga3+-center.

Cooperative Catalysis Mechanism of Brønsted and Lewis Acids from Al(OTf)3 with Methanol for ß-Cellobiose-to-Fructose Conversion: An Experimental and Theoretical Study.

Al-containing catalysts, e.g., Al(OTf)3, show good catalytic performance toward the conversion of cellulose to fructose in methanol solution. Here, we report the catalytic isomerization and alcoholysis mechanisms for the conversion of cellobiose to fructose at the PBE0/6-311++G(d,p), aug-cc-pVTZ theoretical level, combining the relevant experimental verifications of electrospray ionization mass spectrometry (ESI-MS), high-performance liquid chromatography (HPLC), and the attenuated total reflection-infrared (ATR-IR) spectra. From the alcoholysis of Al(OTf)3 in methanol solution, the catalytically active species involves both the [CH3OH2]+ Brønsted acid and the [Al(CH3O)(OTf)(CH3OH)4]+ Lewis acid. There are two reaction pathways, i.e., one through glucose (glycosidic bond cleavage followed by isomerization, w-G) and another through cellobiulose (isomerization followed by glycosidic bond cleavage, w-L). The Lewis acid ([Al(CH3O)(OTf)(CH3OH)4]+) is responsible for the aldose-ketose tautomerization, while the Brønsted acid ([CH3OH2]+) is in charge of ring-opening, ring-closure, and glycosidic bond cleavage. For both w-G and w-L, the rate-determining steps are related to the intramolecular [1,2]-H shift between C1-C2 for the aldose-ketose tautomerization catalyzed by the [Al(CH3O)(OTf)(CH3OH)4]+ species. The Lewis acid ([Al(CH3O)(OTf)(CH3OH)4]+) exhibits higher catalytic activity toward the aldose-ketose tautomerization of glycosyl-chain-glucose to glycosyl-chain-fructose than that of chain-glucose to chain-fructose. Besides, the Brønsted acid ([CH3OH2]+) shows higher catalytic activity toward the glycosidic bond cleavage of cellobiulose than that of cellobiose. Kinetically, the w-L pathway is predominant, whereas the w-G pathway is minor. The theoretically proposed mechanism has been experimentally testified. These insights may advance on the novel design of the catalytic system toward the conversion of cellulose to fructose.

Mechanistic study of cellobiose conversion to 5-hydroxymethylfurfural catalyzed by a Brønsted acid with counteranions in an aqueous solution.

The fundamental understanding of the cooperativity of a Brønsted acid together with its anion for cellulose conversion in an aqueous solution is limited at present, in which cellobiose has usually been regarded as a bridge that connects monosaccharides and cellulose. The mechanism of ß-cellobiose conversion to 5-hydroxymethylfurfural (HMF) catalyzed by a Brønsted acid (H3O+) accompanied by counteranions in an aqueous solution has been studied using quantum chemical calculations at the M06-2X/6-311++G(d,p) level under a polarized continuum model (PCM-SMD). For the formation of the first HMF from cellobiose, there are three reaction pathways, i.e., through cellobiulose and glycosyl-HMF (C/H), through cellobiulose and fructose (C/F/H), and through glucose (C/G/H). For these three reaction pathways, the rate-determining steps are associated with the intramolecular [1,2]-H shift in the aldose-ketose tautomerization. C/H is the thermodynamically predominant pathway, while C/G/H is the kinetically dominant pathway. From cellobiose, the origin of the first HMF results kinetically from a small proportion of both C/H and C/F/H and from a large proportion of C/G/H. For the role of the counteranion in the catalytic activity of H3O+, the halide anions (Cl- and Br-) act as promoters, whereas both NO3- anions and carboxylate-containing anions behave as inhibitors. The roles of these anions in ß-cellobiose conversion to HMF can be correlated with their electrostatic potential and atomic number, which may cause a decrease in the relative enthalpy energy and the value of entropy on interacting with the cation moiety. These insights may advance the novel design of sustainable conversion systems for cellulose conversion into HMF.

Molecular mechanism comparison of decarbonylation with deoxygenation and hydrogenation of 5-hydroxymethylfurfural catalyzed by palladium acetate.

The selective removal of oxygen from 5-hydroxymethylfurfural (HMF) is challenging for the effective utilization of biomass. The catalytic mechanisms of palladium acetate toward the conversion of HMF to furfuryl alcohol (FFA), 5-methylfurfural (5-MF) and 2,5-dihydroxymethyl furan (DHMF) have been theoretically investigated. The decarbonylation of HMF to FFA includes (i) migratory extrusion, (ii) metal-acetate-co-assisted deprotonation, (iii) decarbonylation, (iv) metal-assisted deprotonation, and (v) migratory extrusion and catalyst regeneration. Both hydrogenation and deoxidation of HMF with HCOOH as the H-source involve (i) migratory extrusion, (ii) oxidative addition, (iii) reductive elimination, (iv) metal-assisted deprotonation, and (v) migratory extrusion and catalyst regeneration. The C-H bond cleavage is the crucial reaction step, in which the metal-acetate-co-assisted deprotonation is kinetically more preferable than the oxidative addition. Both FFA and DHMF are kinetically superior to 5-MF. In terms of selectivity, increasing the temperature is beneficial to decarbonylation and decreasing the temperature is advantageous to hydrogenation. The present finding provides molecular-level insight into the functions of both the metal-center and coordinated-ligand in the Pd(OAc)2 catalyst, which may drive the novel design of catalytic systems toward both decarbonylation and hydrogenation reactions.

Regular patterns of the effects of hydrogen-containing additives on the formation of CdSe monomer.

It is unclear at the molecular level why HY (HY = RSH, or ROH, or RNH2) with HPPh2 additives kinetically affects the reaction pathway to the formation of different monomers (Ph2P-SeCd-Y or Ph2P-SeCdSe-Y) in the systhesis of semiconductor nanocrystals. In the present work, it was found that in a [Cd(OA)2 + Se[double bond, length as m-dash]P(C8H17)3 + HPPh2 + HY] mixture, HY behaves as a mediator for the formation of the initial kind of monomer, besides as a hydrogen/proton donor in the release of oleic acid and as an accelerant in the Se-P bond cleavage, which follows the mechanism of hydrogen-shift/nucleophilic-attack. The capability of the HY additive to provide a H-source decreases in the order SePPh2H > RSH > HPPh2 > ROH > RNH2, while the performance of HY to accelerate Se-P bond cleavage decreases in the order HPPh2 > RSH > RNH2 > ROH. The capacity of HY to promote the formation of the Ph2P-SeCd-Y monomer decreases in the order RSH > HPPh2 > ROH > RNH2, while the effect of HY to drive the formation of the Ph2P-SeCdSe-Y monomer decreases in the order HPPh2 > RSH > RNH2 > ROH. The activation strain energy plays a key role in both the Se-P and H-Y bond cleavage, which correlates negatively to the size of the coordinated atom radius. When only HPPh2 is present without other HY species (HY = RNH2, or RSH, or ROH), Ph2P-SeCdSe-PPh2 is preferentially formed. Alternatively, when both HY (HY = RNH2, or RSH, or ROH) and HPPh2 are present, Ph2P-SeCd-Y is favorably formed. For the formation of Ph2P-SeCd-Y (Y = -PPh2, -SR, -OR, and -NHR), SePPh2H embodies the catalytic performance, while HPPh2 serves as the catalyst for the formation of Ph2P-SeCdSe-Y (Y = -NHR or -OR). Our study brings a molecular-level insight into the relationship between the CdSe monomer and the phosphorous-containing side-product, which may advance the rational design and synthesis of quantum dots.

Insights into the Mechanistic Role of Diphenylphosphine Selenide, Diphenylphosphine, and Primary Amines in the Formation of CdSe Monomers.

The formation mechanism of CdSe monomers from the reaction of cadmium oleate (Cd(OA)2) and SePPh2H in the presence of HPPh2 and RNH2 was studied systematically at the M06//B3LYP/6-31++G(d,p),SDD level in 1-octadecene solution. Herein, SePPh2H, HPPh2, and RNH2 act as hydrogen/proton donors with a decreased capacity, leading to the release of oleic acid (RCOOH). The longer the radius of the coordinated atom is, the larger the size of the cyclic transition state is, which lowers the activation strain and the Gibbs free energy of activation for the release of RCOOH. From the resulting RCOOCdSe-PPh2, for the formation of Ph2P-CdSe-PPh2 (G), SePPh2H acts as a catalyst, in which the turnover frequency determining transition state (TDTS) is characteristic of the Se-P bond cleavage. For the formation of RHN-CdSe-PPh2 (H), SePPh2H also serves as a catalyst, in which the TDTS is representative of the N-H bond cleavage. For the formation of Ph2PSe-CdSe-NHR (I), HPPh2 behaves as a catalyst, in which the TDTS is typical of the Se-P and N-H bond cleavage. The rate constants increase as kI < kH < kG, which is in good agreement with our previous experimental observations reported. The present study brings insight into the use of additives such as HPPh2 and RNH2 to synthesize colloidal quantum dots.

Theoretical Study on the Catalytic Reduction Mechanism of NO by CO on Tetrahedral Rh4 Subnanocluster.

The catalytic mechanism of 2NO + 2CO → N2 + 2CO2 on Rh4 cluster has been systematically investigated on the ground and first excited states at the B3LYP/6-311+G(2d),SDD level. For the overall reaction of 2NO + 2CO → N2 + 2CO2, the main reaction pathways take place on the facet site rather than the edge site of the Rh4 cluster. The turnover frequency (TOF) determining transition states are characteristic of the second N-O bond cleavage with rate constant k4 = 1.403 × 10(11) exp (-181 203/RT) and the N-N bond formation for the intermediate N2O formation with rate constant k2 = 3.762 × 10(12) exp (-207 817/RT). The TOF-determining intermediates of (3)N(b)Rh4NO and (3)N(b)Rh4O(b)(NO) are associated with the nitrogen-atom molecular complex, which is in agreement with the experimental observation of surface nitrogen. On the facet site of Rh4 cluster, the formation of CO2 stems solely from the recombination of CO and O atom, while N2 originates partly from the recombination of two N atoms and partly from the decomposition of N2O. For the N-O bond cleavage or the synchronous N-O bond cleavage and C-O bond formation, the neutral Rh4 cluster exhibits better catalytic performance than the cationic Rh4(+) cluster. Alternatively, for N-N bond formation, the cationic Rh4(+) cluster possesses better catalytic performance than the neutral Rh4 cluster.

Hydroxylation mechanism of methane and its derivatives over designed methane monooxygenase model with peroxo dizinc core.

The peroxo dizinc Zn(2)O(2) complex Q coordinated by imidazole and carboxylate groups for each Zn center has been designed to model the hydroxylase component of methane monooxygenase (MMO) enzyme, on the basis of the experimentally available structure information of enzyme with divalent zinc ion and the MMO with Fe(2)O(2) core. The reaction mechanism for the hydroxylation of methane and its derivatives catalyzed by Q has been investigated at the B3LYP*/cc-pVTZ, Lanl2tz level in protein solution environment. These hydroxylation reactions proceed via a radical-rebound mechanism, with the rate-determining step of the C-H bond cleavage. This radical-rebound reaction mechanism is analogous to the experimentally available MMOs with diamond Fe(2)O(2) core accompanied by a coordinate number of six for the hydroxylation of methane. The rate constants for the hydroxylation of substrates catalyzed by Q increase along CH(4) < CH(3)F < CH(3)CN ≈ CH(3)NO(2) < CH(3)CH(3). Both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) jointly affect the activation energy ΔE(≠). For the C-H cleavage of substrate CH(3)X, with the decrease of steric shielding for the substituted CH(3)X (X = F > H > CH(3) > NO(2) > CN) attacking the O center in Q, the activation strain ΔE(≠)(strain) decreases, whereas the stabilizing interaction ΔE(≠)(int) increases. It is predicted that the MMO with peroxo dizinc Zn(2)O(2) core should be a promising catalyst for the hydroxylation of methane and its derivatives.

Theoretical and experimental studies on selective oxidation of aromatic ketone by performic acid.

The Baeyer-Villiger (B-V) reactions of 3,4-dimethoxy acetophenone (DMOAP), 4-methyl acetophenone (MAP), and acetophenone (AP) with performic acid (PFA) in formic acid (FA) solvent have been studied by density functional theory (DFT) method. The noncatalyzed and the formic acid-catalyzed reaction paths have been calculated at the MPWB1K/6-311++G(d,p)-IEF-PCM// MPWB1K/6-311G(d,p) level of theory. On the basis of the calculations, the attack of peracid to the carbonyl carbon is rate-determining in both the noncatalyzed and acid-catalyzed paths. The selective oxidation of 3,4-dimethoxy acetophenone and 4-methyl acetophenone by performic acid into aromatic esters have been experimentally investigated. The kinetic rate constants were obtained in the temperature range of 303 to 323 K. The selectivity of product was also explained by the NBO electric charge analysis. The calculated activation energy barriers of the B-V reaction of DMOAP and MAP were in good agreement with those of experiment.

Activation of propane C-H and C-C bonds by gas-phase Pt atom: a theoretical study.

The reaction mechanism of the gas-phase Pt atom with C(3)H(8) has been systematically investigated on the singlet and triplet potential energy surfaces at CCSD(T)//BPW91/6-311++G(d, p), Lanl2dz level. Pt atom prefers the attack of primary over secondary C-H bonds in propane. For the Pt + C(3)H(8) reaction, the major and minor reaction channels lead to PtC(3)H(6) + H(2) and PtCH(2) + C(2)H(6), respectively, whereas the possibility to form products PtC(2)H(4) + CH(4) is so small that it can be neglected. The minimal energy reaction pathway for the formation of PtC(3)H(6) + H(2), involving one spin inversion, prefers to start at the triplet state and afterward proceed along the singlet state. The optimal C-C bond cleavages are assigned to C-H bond activation as the first step, followed by cleavage of a C-C bond. The C-H insertion intermediates are kinetically favored over the C-C insertion intermediates. From C-C to C-H oxidative insertion, the lowering of activation barrier is mainly caused by the more stabilizing transition state interaction ΔE(≠) (int), which is the actual interaction energy between the deformed reactants in the transition state.

Mechanism of Preferential Hydrogenation of Hydroxymethyl Group to Aldehyde Group in 5-Hydroxymethylfurfural over W2 C-Based Catalyst.

A W4 C2 cluster was used to model a W2 C catalyst with the armchair model of activated carbon support, noted as W4 C2 /AC. Over W4 C2 /AC, the mechanism for the hydrogenation of both -H2 OH and -CHO groups in 5-hydroxymethylfurfural (HMF) was theoretically studied in tetrahydrofuran at GGA-PBE/DNP level. 5-Methylfurfural was the major product from only hydrodehydration of the -CH2 OH group, whereas 2,5-dihydroxymethylfuran was the minor product from the hydrogenation of both -CH2 OH and -CHO groups. The rate-determining steps were concerned with the -C(H)2 -H bond formation for the hydrodehydration of -CH2 OH group, and the -(OH)(H)-H bond formation for the hydrogenation of -CHO group. Kinetically, W-sites promoted the hydrodehydration of -CH2 OH group and inhibited the hydrogenation of -CHO group. This stemmed from the strong Lewis acidity of W-sites, which easily accepted the lone-pair electrons of the oxygen atom in the -C(OH)(H)- group, making -C(OH)(H)-H bond formation hard, and hampering the hydrogenation of the -CHO group.

Theoretical study on the gas-phase reaction mechanism between palladium monoxide and methane.

The gas-phase reaction mechanism between palladium monoxide and methane has been theoretically investigated on the singlet and triplet state potential energy surfaces (PESs) at the CCSD(T)/AVTZ//B3LYP/6-311+G(2d, 2p), SDD level. The major reaction channel leads to the products PdCH(2) + H(2)O, whereas the minor channel results in the products Pd + CH(3)OH, CH(2)OPd + H(2), and PdOH + CH(3). The minimum energy reaction pathway for the formation of main products (PdCH(2) + H(2)O), involving one spin inversion, prefers to start at the triplet state PES and afterward proceed along the singlet state PES, where both CH(3)PdOH and CH(3)Pd(O)H are the critical intermediates. Furthermore, the rate-determining step is RS-CH(3) PdOH → RS-2-TS1cb → RS-CH(2)Pd(H)OH with the rate constant of k = 1.48 × 10(12) exp(-93,930/RT). For the first C-H bond cleavage, both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) affect the activation energy ΔE(≠), with ΔE(≠)(int) in favor of the direct oxidative insertion. On the other hand, in the PdCH(2) + H(2) O reaction, the main products are Pd + CH(3)OH, and CH(3)PdOH is the energetically preferred intermediate. In the CH(2)OPd + H(2) reaction, the main products are Pd + CH(3)OH with the energetically preferred intermediate H(2)PdOCH(2). In the Pd + CH(3)OH reaction, the main products are CH(2)OPd + H(2), and H(2)PdOCH(2) is the energetically predominant intermediate. The intermediates, PdCH(2), H(2) PdCO, and t-HPdCHO are energetically preferred in the PdC + H(2), PdCO + H(2), and H(2)Pd + CO reactions, respectively. Besides, PdO toward methane activation exhibits higher reaction efficiency than the atom Pd and its first-row congener NiO.

Theoretical study on molecular mechanism of aerobic oxidation of 5-hydroxymethylfurfural to 2,5-diformyfuran catalyzed by VO2 + with counterpart anion in N,N-dimethylacetamide solution.

Vanadium-containing catalysts exhibit good catalytic activity toward the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformyfuran (DFF). The aerobic oxidation mechanism of HMF to DFF catalyzed by VO2 + with counterpart anion in N,N-dimethylacetamide (DMA) solution have been theoretically investigated. In DMA solution, the stable VO2 +-containing complex is the four-coordinated [V(O)2(DMA)2]+ species. For the gross reaction of 2HMF + O2 → 2DFF + 2H2O, there are three main reaction stages, i.e., the oxidation of the first HMF to DFF with the reduction of [V(O)2(DMA)2]+ to [V(OH)2(DMA)]+, the aerobic oxidation of [V(OH)2(DMA)]+ to the peroxide [V(O)3(DMA)]+, and the oxidation of the second HMF to DFF with the reduction of [V(O)3(DMA)]+ to [V(O)2(DMA)2]+. The rate-determining reaction step is associated with the C-H bond cleavage of -CH2 group of the first HMF molecule. The peroxide [V(O)3(DMA)]+ species exhibits better oxidative activity than the initial [V(O)2(DMA)2]+ species, which originates from its narrower HOMO-LUMO gap. The counteranion Cl- exerts promotive effect on the aerobic oxidation of HMF to DFF catalyzed by [V(O)2(DMA)2]+ species.

Theoretical study on the gas-phase reaction mechanism between rhodium monoxide and methane for methanol production.

The gas-phase reaction mechanism between methane and rhodium monoxide for the formation of methanol, syngas, formaldehyde, water, and methyl radical have been studied in detail on the doublet and quartet state potential energy surfaces at the CCSD(T)/6-311+G(2d, 2p), SDD//B3LYP/6-311+G(2d, 2p), SDD level. Over the 300-1100 K temperature range, the branching ratio for the Rh((4)F) + CH(3)OH channel is 97.5-100%, whereas the branching ratio for the D-CH(2)ORh + H(2) channel is 0.0-2.5%, and the branching ratio for the D-CH(2)ORh + H(2) channel is so small to be ruled out. The minimum energy reaction pathway for the main product methanol formation involving two spin inversions prefers to both start and terminate on the ground quartet state, where the ground doublet intermediate CH(3)RhOH is energetically preferred, and its formation rate constant over the 300-1100 K temperature range is fitted by k(CH3RhOH) = 7.03 x 10(6) exp(-69.484/RT) dm(3) mol(-1) s(-1). On the other hand, the main products shall be Rh + CH(3)OH in the reactions of RhO + CH(4), CH(2)ORh + H(2), Rh + CO +2H(2), and RhCH(2) + H(2)O, whereas the main products shall be CH(2)ORh + H(2) in the reaction of Rh + CH(3)OH. Meanwhile, the doublet intermediates H(2)RhOCH(2) and CH(3)RhOH are predicted to be energetically favored in the reactions of Rh + CH(3)OH and CH(2)ORh + H(2) and in the reaction of RhCH(2) + H(2)O, respectively.

Theoretical study on the gas-phase reaction mechanism between nickel monoxide and methane for syngas production.

The comprehensive mechanism survey on the gas-phase reaction between nickel monoxide and methane for the formation of syngas, formaldehyde, methanol, water, and methyl radical has been investigated on the triplet and singlet state potential energy surfaces at the B3LYP/6-311++G(3df, 3pd)//B3LYP/6-311+G(2d, 2p) levels. The computation reveals that the singlet intermediate HNiOCH(3) is crucial for the syngas formation, whereas two kinds of important reaction intermediates, CH(3)NiOH and HNiOCH(3), locate on the deep well, while CH(3)NiOH is more energetically favorable than HNiOCH(3) on both the triplet and singlet states. The main products shall be syngas once HNiOCH(3) is created on the singlet state, whereas the main products shall be methyl radical if CH(3)NiOH is formed on both singlet and triplet states. For the formation of syngas, the minimal energy reaction pathway (MERP) is more energetically preferable to start on the lowest excited singlet state other than on the ground triplet state. Among the MERP for the formation of syngas, the rate-determining step (RDS) is the reaction step for the singlet intermediate HNiOCH(3) formation involving an oxidative addition of NiO molecule into the C-H bond of methane, with an energy barrier of 120.3 kJ mol(-1). The syngas formation would be more effective under higher temperature and photolysis reaction condition.

Cobalt and manganese stress in the microalga Pavlova viridis (Prymnesiophyceae): effects on lipid peroxidation and antioxidant enzymes.

Pollution of marine environment has become an issue of major concern in recent years. Serious environmental pollution by heavy metals results from their increasing utilization in industrial processes and because most heavy metals are transported into the marine environment and accumulated without decomposition. The aim of the present study is to investigate the effects on growth, pigments, lipid peroxidation, and some antioxidant enzyme activities of marine microalga Pavlova viridis, in response to elevated concentrations of cobalt (Co) and manganese (Mn), especially with regard to the involvement of antioxidative defences against heavy metal-induced oxidative stress. In response to Co2+, lipid peroxidation was enhanced compared to the control, as an indication of the oxidative damage caused by metal concentration assayed in the microalgal cells but not Mn2+. Exposure of Pavlova viridis to the two metals caused changes in enzyme activities in a different manner, depending on the metal assayed: after Co2+ treatments, total superoxide dismutase (SOD) activity was irregular, although it was not significantly affected by Mn2+ exposure. Co2+ and Mn2+ stimulated the activities of catalase (CAT) and glutathione (GSH), whereas, glutathione peroxidase (GPX) showed a remarkable increase in activity in response to Co2+ treatments and decreased gradually with Mn2+ concentration, up to 50 micromol/L, and then rose very rapidly, reaching to about 38.98% at 200 micromol/L Mn2+. These results suggest that an activation of some antioxidant enzymes was enhanced, to counteract the oxidative stress induced by the two metals at higher concentration.

Screening of microalgae for integral biogas slurry nutrient removal and biogas upgrading by different microalgae cultivation technology.

The microalgae-based technology has been developed to reduce biogas slurry nutrients and upgrade biogas simultaneously. In this work, five microalgal strains named Chlorella vulgaris, Scenedesmus obliquus, Selenastrum capricornutum, Nitzschia palea, and Anabaena spiroides under mono- and co-cultivation were used for biogas upgrading. Optimum biogas slurry nutrient reduction could be achieved by co-cultivating microalgae (Chlorella vulgaris, Scenedesmus obliquus, and Nitzschia palea) with fungi using the pelletization technology. In addition, the effects of different ratio of mixed LED light wavelengths applying mixed light-emitting diode during algae strains and fungi co-cultivation on CO2 and biogas slurry nutrient removal efficiency were also investigated. The results showed that the COD (chemical oxygen demand), TN (total nitrogen), and TP (total phosphorus) removal efficiency were 85.82 ± 5.37%, 83.31 ± 4.72%, and 84.26 ± 5.58%, respectively at red: blue = 5:5 under the co-cultivation of S. obliquus and fungi. In terms of biogas upgrading, CH4 contents were higher than 90% (v/v) for all strains, except the co-cultivation with S. obliquus and fungi at red: blue = 3:7. The results indicated that co-cultivation of microalgae with fungi under mixed light wavelengths treatments was most successful in nutrient removal from wastewater and biogas upgrading.

Density Functional Theory Study on the Nucleation and Growth of Pt n Clusters on γ-Al2O3(001) Surface.

Little is known about the detailed structural information at the interface of Pt n cluster and γ-Al2O3(001) surface, which plays an important role in the dehydrogenation and cracking of hydrocarbons. Here, the nucleation and growth of Pt n (n = 1-8, 13) clusters on a γ-Al2O3(001) surface have been examined using density functional theory. For the most stable configuration Pt n /γ-Al2O3(001) (n = 1-8, 13), Pt n clusters bond to the γ-Al2O3(001) surface through Pt-O and Pt-Al bonds at the expense of electron density of the Pt n cluster. With the increase in the Pt n cluster size, both the metal-support interaction and the nucleation energies exhibit an odd-even oscillation pattern, which are lower for an even Pt n cluster size than those for its adjacent odd ones. Both the metal-surface and metal-metal interactions are competitive, which control the nanoparticle morphology transition from two-dimension (2D) to three-dimension (3D). On the γ-Al2O3(001) surface, when the metal-support interaction governs, smaller clusters such as Pt1, Pt2, Pt3, and Pt4 prefer a planar 2D nature. Alternatively, when the metal-metal interaction dominates, larger clusters such as Pt5, Pt6, Pt7, Pt8, and Pt13 exhibit a two-layer structure with one or more Pt atoms on the top layer not interacting directly with the support. Herein, the Pt4 cluster is the most stable 2D structure; Pt5 and Pt6 clusters are the transition from the 2D to the 3D structure; and the Pt7 cluster is the smallest 3D structure.