Bifunctional MoO3-x/CuS Heterojunction Nanozyme-Driven "Turn-On" SERS Signal for the Sensitive Detection of Cerebral Infarction Biomarker S100B.

The use of nanozymes has become a promising auxiliary approach to "turn on" surface-enhanced Raman scattering (SERS) signals for the label-free detection of disease markers. Nevertheless, there are still major challenges to develop bifunctional nanomaterials with both excellent enzyme-like activity and high SERS performance. To this end, a novel Z-scheme MoO3-x/CuS heterojunction was first constructed as a powerful "two-in-one" substrate, which can not only catalyze leucomalachite green (LMG) to SERS-active malachite green (MG) but also serve as an efficient substrate to amplify the SERS signal of catalysate. Due to the strong interfacial coupling effect between the MoO3-x and CuS nanomaterial, which promoted the separation and transport of carriers in the heterojunction, the MoO3-x/CuS heterojunction showed higher peroxidase-like activity compared to individual components and the previously reported heterojunction nanozymes. Inspired by these results, a sandwich-type SERS immunoassay for the detection of the cerebral infarction biomarker S100 calcium-binding protein (S100B) was proposed based on the output signal of MG at 1620 cm-1. Furthermore, introducing the antifouling material chitosan on the surface of the MoO3-x/CuS heterojunction can effectively resist nonspecific protein adsorption and significantly improve the detection accuracy of the immunoassay. Therefore, the SERS immunoassay based on the MoO3-x/CuS heterojunction realized highly sensitive and selective detection of S100B in the concentration range of 0.001 to 100 ng/mL, with a low limit of detection of 0.47 pg/mL. The developed method has been successfully used for the accurate detection of S100B in clinical serum. The results showed that the level of S100B in the serum of cerebral infarction patients can be distinguished from those of healthy individuals and intracranial tumor patient controls. In addition, the acquired values of S100B in the serum of cerebral infarction patients based this strategy were well consistent with the results of electrochemiluminescence (ECL) detection with a relative error of less than ±7.3. It is expected that this work may open up a paradigm for improving detection sensitivity and accuracy for the early diagnosis and treatment monitoring of cerebral infarction in the clinic.

Bifunctional Mo2N Nanoparticles with Nanozyme and SERS Activity: A Versatile Platform for Sensitive Detection of Biomarkers in Serum Samples.

The combined application of nanozymes and surface-enhanced Raman scattering (SERS) provides a promising approach to obtain label-free detection. However, developing nanomaterials with both highly efficient enzyme-like activity and excellent SERS sensitivity remains a huge challenge. Herein, we proposed one-step synthesis of Mo2N nanoparticles (NPs) as a "two-in-one" substrate, which exhibits both excellent peroxidase (POD)-like activity and high SERS activity. Its mimetic POD activity can catalyze the 3,3',5,5'-tetramethylbenzidine (TMB) molecule to SERS-active oxidized TMB (ox-TMB) with high efficiency. Furthermore, combining experimental profiling with theory, the mechanism of POD-like activity and SERS enhancement of Mo2N NPs was explored in depth. Benefiting from the outstanding properties of Mo2N NPs, a versatile platform for indirect SERS detection of biomarkers was developed based on the Mo2N NPs-catalyzed product ox-TMB, which acts as the SERS signal readout. The feasibility of this platform was validated using glutathione (GSH) and target antigens alpha-fetoprotein antigen (AFP) and carcinoembryonic antigen (CEA) as representatives of small molecules with a hydroxyl radical (·OH) scavenging effect and proteins with a low Raman scattering cross-section, respectively. The limits of detection of GSH, AFP, and CEA were as low as 0.1 µmol/L, 89.1, and 74.6 pg/mL, respectively. Significantly, it also showed application in human serum samples with recoveries ranging from 96.0 to 101%. The acquired values based on this platform were compared with the standard electrochemiluminescence method, and the relative error was less than ±7.3. This work not only provides a strategy for developing highly active bifunctional nanomaterials but also manifests their widespread application for multiple biomarkers analysis.

Synergetic Multichiral Covalent Organic Framework for Enantioselective Recognition and Separation.

In enantiomer recognition and separation, a highly enantioselective approach with universal applicability is urgently desired but hard to realize, especially in the case of chiral molecules. To resolve the trade-off between enantioselectivity and universality, a glutathione (GSH) and methylated cyclodextrins (MCD)-functionalized covalent organic framework (GSH-MCD COF) with porosity and abundant chiral surfaces is presented that was designed and synthesized for recognition and separation of various enantiomers. As expected, the GSH-MCD COF can be used as chiral stationary phases for the separation of various enantiomers, including aromatic alcohols, aromatic acids, amides, amino acids, and organic acids, with performance and versatility even superior to some widely used commercial chiral chromatographic columns. Furthermore, the synthesized GSH-MCD COF shows high enantioselectivity for the rapid recognition and identification of enantiomers and chiral metabolites when coupling to Raman spectroscopy. Molecular simulations suggest that the COF provides a confined microenvironment for cyclodextrins and peptides that dictates the separation and recognition capability. This work provides a strategy to synthesize synergetic multichiral COF and achieve separations and recognitions of enantiomers in complex samples.

Role of FBXL5 in redox homeostasis and spindle assembly during oocyte maturation in mice.

As an E3 ubiquitin ligase, F-box and leucine-rich repeat protein 5 (FBXL5) participates in diverse biologic processes. However, the role of Fbxl5 in mouse oocyte meiotic maturation has not yet been fully elucidated. The present study revealed that mouse oocytes depleted of Fbxl5 were unable to complete meiosis, as Fbxl5 silencing led to oocyte meiotic failure with reduced rates of GVBD and polar body extrusion. In addition, Fbxl5 depletion induced aberrant mitochondrial dynamics as we noted the overproduction of reactive oxygen species (ROS) and the accumulation of phosphorylated γH2AX with Fbxl5 knockdown. We also found that Fbxl5-KD led to the abnormal accumulation of CITED2 proteins in mouse oocytes. Our in vitro ubiquitination assay showed that FBXL5 interacted with CITED2 and that it mediated the degradation of CITED2 protein through the ubiquitination-proteasome pathway. Collectively, our data revealed critical functions of FBXL5 in redox hemostasis and spindle assembly during mouse oocyte maturation.

Effect of GnRH agonist trigger with or without low-dose hCG on reproductive outcomes for PCOS women with freeze-all strategy: a propensity score matching study.

PURPOSE: This study aimed to compare the effect of gonadotropin-releasing hormone agonist (GnRHa) trigger alone versus dual trigger comprising GnRHa and low-dose human chorionic gonadotropin (hCG) on reproductive outcomes in patients with polycystic ovary syndrome (PCOS) who received the freeze-all strategy. METHODS: A total of 615 cycles were included in this retrospective cohort study. Propensity score matching (PSM) was performed to control potential confounding factors between GnRHa-trigger group (0.2 mg GnRHa) and dual-trigger group (0.2 mg GnRHa plus 1000/2000 IU hCG) in a 1:1 ratio. Multivariate logistic regression was applied to estimate the association between trigger methods and reproductive outcomes. RESULTS: After PSM, patients with dual trigger (n = 176) had more oocytes retrieved, mature oocytes, and 2PN embryos compared to that with GnRHa trigger alone. However, the oocytes maturation rate, normal fertilization rate, and frozen embryos between the two groups were not statistically different. The incidence of ovarian hyperstimulation syndrome (OHSS) (14.8% vs. 2.8%, P < 0.001) and moderate/severe OHSS (11.4% vs. 1.7%, P < 0.001) were significantly higher in dual-trigger group than in GnRHa-alone group. Logistic regression analysis showed the adjusted odds ratio of dual trigger was 5.971 (95% confidence interval 2.201-16.198, P < 0.001) for OHSS. The pregnancy and single neonatal outcomes were comparable between the two groups (P > 0.05). CONCLUSION: For PCOS women with freeze-all strategy, GnRHa trigger alone decreased the risk of OHSS without damaging oocyte maturation and achieved satisfactory pregnancy outcomes.

Enhancing Fat Transplantation Efficiency in a Mouse Model through Pretreatment of Adipose-Derived Stem Cells with RIP3 Inhibitors.

BACKGROUND: Autologous fat transplantation, widely used in cosmetic and reparative surgery for volumetric enhancements, faces challenges with its inconsistent long-term survival rates. The technique's efficacy, crucial for its development, is hindered by unpredictable outcomes. Enriching fat grafts with adipose-derived stem cells (ADSCs) shows promise in improving survival efficiency. OBJECTIVES: This study aimed to explore the potential of receptor-interacting protein kinase 3 (RIP3) kinase inhibitors as a pretreatment for ADSCs in enhancing autologous fat graft retention over a long term. METHODS: ADSCs were isolated, cultured under normal or oxygen-glucose deprivation conditions, and mixed with particulate fat grafts to form distinct experimental groups in female nude mice. Fat graft mass and volume, along with underlying mechanisms, were evaluated using quantitative reverse transcription polymerase chain reaction (RT-qPCR), immunohistochemistry, and Western blot analysis. RESULTS: The experimental group, pretreated with RIP3 kinase inhibitors, had higher graft mass and volume, greater adipocyte integrity, and increased peroxisome proliferator-activated receptor gamma (PPARγ) mRNA levels than control groups. Furthermore, the experimental group demonstrated lower expression of necroptosis pathway proteins in the short term and an ameliorated inflammatory response as indicated by interleukin-1 beta (IL-1ß), interleukin-10 (IL-10) mRNA levels, and histological analyses. Notably, enhanced neovascularization was evident in the experimental group. CONCLUSIONS: These findings suggest that RIP3 kinase inhibitor pretreatment of ADSCs can improve fat graft survival, promote adipocyte integrity, potentially decrease inflammation, and enhance neovascularization. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Chemical-Chemical Redox Cycle Signal Amplification Strategy Combined with Dual Ratiometric Immunoassay for Surface-Enhanced Raman Spectroscopic Detection of Cardiac Troponin I.

Improving the sensitivity and reproducibility of surface-enhanced Raman spectroscopy (SERS) methods for the detection of bioactive molecules is crucial in biological process research and clinical diagnosis. Herein, we designed a novel SERS platform for cardiac troponin I (cTnI) detection by a chemical-chemical redox cycle signal amplification strategy combined with a dual ratiometric immunoassay. First, ascorbic acid (AA) was generated by enzyme-assisted immunoreaction with a cTnI-anchored sandwich structure. Then, oxidized 4-mercaptophenol (ox4-MP) was reacted with AA to produce 4-mercaptophenol (4-MP). Quantitative analysis of cTnI was realized by a Raman signal switch between ox4-MP and 4-MP. Specifically, AA could be regenerated by reductant (tris(2-carboxyethyl) phosphine, TCEP), which in turn produced more signal indicator 4-MP, causing significant signal amplification for cTnI analysis by SERS immunosensing. Moreover, a dual ratiometric-type SERS method was established with the intensity ratio I1077/I822 and I633/I822, which improved the reproducibility of the cTnI assay. The excellent performance of the chemical-chemical redox cycle strategy and ratio-type SERS assay endows the method with high sensitivity and reproducibility. The linear ranges of cTnI were 0.001 to 50.0 ng mL-1 with detection limits of 0.33 pg mL-1 (upon I1077/I822) and 0.31 pg mL-1 (upon I635/I822), respectively. The amount of cTnI in human serum samples yielded recoveries from 89.0 to 114%. This SERS method has remarkable analytical performance, providing an effective approach for the early diagnosis of cardiovascular diseases, and has great latent capacity in the sensitive detection of bioactive molecules.

One-pot synthesis of pillar[5]quinone-amine polymer coated silica as stationary phase for high-performance liquid chromatography.

To expand the application of pillararene in chromatographic separation, we designed and fabricated a pillar[5]quinone-amine polymer coated silica through quinone-amine reaction by facile one-pot synthesis method, which was applied as a stationary phase for high-performance liquid chromatography. Separation of hydrophobic compounds, hydrophilic compounds, halogenated aromatic compounds, and 11 aromatic positional isomers was achieved successfully in this stationary phase. Reverse-phase separation mode and hydrophilic-interaction separation mode were proved to exist, indicating the potential application of the mix-mode stationary phase. Studies of chromatographic retention behavior and molecular simulation showed that multiple interactions might play an important role in the separation process, including hydrophobic interaction, hydrogen-bonding interaction, aromatic π-π interaction, electron donor-acceptor interaction, and host-guest interaction. Column repeatability and stability were tested, which showed relative standard deviations of retention time less than 0.2% for continuous 11 injections, and the durability relative standard deviations of retention time were less than 0.91% after 90 days. This novel design strategy would broaden the application of pillararene-based covalent organic polymer in chromatography and separation science.

Primary amide-functionalized cyclotricatechylene covalent organic frameworks membrane for efficient enrichment of melamine and its derivatives in migration solution of food contact materials.

A highly chemically stable primary amide-functionalized cyclotricatechylene covalent organic framework was synthesized by an irreversible reaction and a post-synthetic modification. It possessed a rod-like morphology and exhibited strong solvent stability owing to the polyether bonds. The material showed good adsorption performance for melamine and its derivatives and adsorption mechanism was investigated by molecular simulations. The adsorbent was coated on the nylon-66 membrane to prepare the enrichment membrane. Under optimized conditions, an in-syringe membrane-based extraction method, combined with ultra-high performance liquid chromatography-tandem mass spectrometry was developed for the analysis of melamine and six melamine derivatives in the migration solution. A good linearity was obtained with correlation coefficients ranging from 0.9924 to 0.9995. The limits of detection were 1-200 ng/L and the limits of quantification were 3-500 ng/L. This method was successfully applied to the migration solution of sushi bamboo rolling mats with spiked recoveries of 73.2%-115% and relative standard deviations of 0.9%-9.9%. This work shows a practical and perspective approach for the efficient enrichment of food contact material hazards.

The Effect of Various Temperatures on the Inflammatory Profile of Fat Graft Storage: An Experimental Study.

Fat tissue has been widely used as a filler material during plastic surgery, but unpredictable fat retention remains a significant concern. Fat tissue is vulnerable to ischemia and hypoxia, but it always has waiting time before injection in the operation theater. Apart from transferring fat tissue as quickly as possible after harvesting, washing the aspirate with cool normal saline is often used. However, the mechanisms of cool temperature acting on adipose tissue have yet to be fully elucidated. Herein, this study aims to explore the effect of preservation at different temperatures on the inflammatory profile of adipose tissue. Inguinal adipose tissue of rats was collected and cultured in vitro under 4°C, 10°C, and room temperature for 2 hours. The proportion of damaged adipocytes and an array of cytokines were determined. We observed that the damage rate of the adipocyte membrane was slightly higher at room temperature, but there was no significant difference, while we noticed increased IL-6 and MCP-1 levels in adipose tissue at room temperature ( P ＜0.01). The 4°C and 10°C cool temperatures may offer protection against proinflammatory states during the adipose tissue preserved in vitro.

ATP-Responsive Strand Displacement Coupling with DNA Origami/AuNPs Strategy for the Determination of Microcystin-LR Using Surface-Enhanced Raman Spectroscopy.

The DNA origami-mediated self-assembly strategy has emerged as a powerful tool in surface-enhanced Raman spectroscopy (SERS). However, these self-assembly approaches typically do not possess high detection specificity. Herein, a novel strategy based on adenosine triphosphate (ATP)-responsive strand displacement (ARSD) coupling with DNA origami/AuNPs for SERS analysis of microcystin-LR (MC-LR) is presented. In the presence of MC-LR and ATP molecules, nucleic acid sensing structures fabricated with anti-MC-LR aptamer (T1) and ATP aptamer (T2) were triggered to release the remaining ATP. In addition, DNA origami-assisted assembly results in the formation of homogeneous plasmonic nanostructures for Raman enhancement via strong plasmonic coupling. After the binding in the gaps of functionalized DNA origami/AuNPs, the Raman shift of the ATP molecules becomes detectable, leading to increased SERS intensity in 734 cm-1. A linear response to MC-LR was obtained in the concentration range of 1.56-50 µg·L-1, and the limit of detection (LOD) was 0.29 µg·L-1. Combined with the solid-phase extraction sample pretreatment for extraction and 10-fold concentration, this proposed method was successfully used to detect MC-LR type in real lake-water samples with good recoveries of 98.4-116% and relative standard deviations of 1.9-6.7%. Furthermore, for the detection of MC-LR in contaminated lake-water samples, the results of the developed method and ultrahigh-performance liquid chromatography-tandem mass spectrometry were found to be in agreement with relative errors between -12 and 2.4%. The proposed strategy provides a sensitive recognition and signal amplification platform for trace MC-LR analysis as well as innovative nucleic acid sensing structures for toxin analysis more generally.

Integrated sample-pretreatment strategy for separation and enrichment of microplastics and primary aromatic amines in the migration of teabag.

In this work, an integrated sample-pretreatment strategy for the separation and enrichment of microplastics and primary aromatic amines from the migration of teabag was developed. The migration solution of teabag was passed through a homemade device. The microplastics were firstly captured by a silver membrane, and then the primary aromatic amines were enriched by a solid-phase extraction column. The microplastics migrated from teabag were detected by attenuated total reflection-Fourier transform infrared spectrometer and Raman spectroscopy. The data showed the character, the number of particles, area ratio, and morphology of microplastics migrated from the teabag. Subsequently, after the enrichment procedure, a sensitive analytical method for primary aromatic amines was established followed by ultra-high performance liquid chromatography-tandem mass spectrometry. The method showed wide linear ranges with R2 greater than 0.9915, low limits of detection (2-18 ng/L), and low limits of quantification (8-50 ng/L). The developed method was adopted to analyze microplastics and primary aromatic amines migrated from nylon and polyethylene terephthalate teabag under different temperatures and times. The integrated sample-pretreatment strategy displayed promising potentials in the one-step preparation of the microplastics and hazardous molecules in the sample of environment and food security.

In Vitro Study on the Biological Characteristics of Adipose-Derived Stem Cells from Liposuction Area in Patients with Progressive Hemifacial Atrophy.

OBJECTIVE: In this study, we investigate the biological characteristics of ADSCs from the liposuction area in patients with hemifacial atrophy in vitro. METHODS: ADSCs were respectively extracted from the donor site of patients with hemifacial atrophy and healthy ones. ADSCs of two groups were respectively tested for proliferation ability, phenotype, multipotency, migration ability, self-repair ability, apoptosis, and autophagy. Exosomes extracted from the supernatant of two groups were detected by NTA particle size, electron microscopy (TEM), and WB for CD63 and TSG10, respectively. RESULTS: CCK-8 showed a statistically less increase in cell proliferation in PHA-ADSCs after the sixth day. ADSCs in both groups had typical phenotypes and multidirectional abilities. PHA-ADSCs exhibited weaker droplet formation. The cell migration ability in PHA-ADSCs was weaker tested by Transwell assay. The live/dead proportion calculated by ImageJ following calcein-AM/PI double staining revealed live cells in PHA-ADSCs was 46.11% compared with 54.21% in NORM-ADSCs after OGD treatment. A significant down-regulation of ATG7 and ATG12 and a higher percentage of apoptosis were found in PHA-ADSCs. A significant up-regulation of BAX occurred in PHA-ADSCs.ARPC5 expression in the PHA group was extremely distinct down-regulated.CDKN1A and CDKN2A expression in the PHA group was significantly up-regulated.WB analyses confirmed that both groups' ADSCs-Exosomes surface markers CD63 and TSG101 were positively expressed but varied significantly. CONCLUSIONS: PHA-ADSCs exhibited a poorer proliferation ability, higher apoptosis percentage, weaker lipid droplets formation, weaker cell migration, poorer intolerance to OGD, aging earlier, and weaker self-renewal and repairability.PHA-ADSCs-Exosomes showed low expressions of CD63 and TSG101.This study provides strong evidence that the addition of exosomes with specific cytokines can improve the fat survival rate after fat filling in patients with hemifacial atrophy. NO LEVEL ASSIGNED: This journal requires that authors 42 assign a level of evidence to each submission to which 43 Evidence-Based Medicine rankings are applicable. This 44 excludes Review Articles, Book Reviews, and manuscripts 45 that concern Basic Science, Animal Studies, Cadaver 46 Studies, and Experimental Studies. For a full description of 47 these Evidence-Based Medicine ratings, please refer to the 48 Table of Contents or the online Instructions to Authors 49 https://www.springer.com/00266 .

Augmentation Mammoplasty With External Volume Expander-Assisted Autologous Fat Grafting in 305 Asian Patients.

BACKGROUND: External volume expander (EVE)-assisted autologous fat grafting is suitable for breast augmentation, but no large sample study in Asia has confirmed this method. OBJECTIVES: The authors reported their experience and outcomes in augmentation mammoplasty with EVE-assisted autologous fat grafting. METHODS: A retrospective study was conducted in 305 female patients who underwent augmentation mammoplasty with EVE-assisted fat grafting between September 2012 and December 2020. Doctors utilized Crisalix (Crisalix S.A., Lausanne, Switzerland) for 3-dimensional (3D) imaging acquisition to measure the increase in breast volume to evaluate doctor satisfaction. The Preoperative Satisfaction with Breast and BREAST-Q questionnaires were employed to assess patients' preoperative and postoperative satisfaction, respectively. RESULTS: The 305 female patients were aged 18 to 50 years (mean, 35.9 years). Among them, 68.52% were "very satisfied," 18.69% were "somewhat satisfied," 11.15% were "somewhat dissatisfied," and 1.64% were "very dissatisfied" based on BREAST-Q analysis, whereas 100% were dissatisfied according to the Preoperative Satisfaction with Breast questionnaire. Doctors employed Crisalix to measure the increase in breast volume to evaluate doctor satisfaction. The results showed 76.01% had an increase in breast volume of 150 to 250 mL or >250 mL and were "satisfied" and "very satisfied," respectively, 21.64% had an increase of 50 to 149 mL and were "somewhat satisfied," and 2.30% had an increase <50 mL and were "dissatisfied." There were no complications, such as obvious fat liquefaction, infection, or fat embolism. CONCLUSIONS: Augmentation mammoplasty with EVE-assisted fat grafting is effective and satisfying in China. Crisalix for 3D imaging acquisition is convenient and effective in measuring breast volume.

Research progress on sample pretreatment methods for migrating substances from food contact materials.

Excessive absorption of migrating substances from food contact materials can affect human health. Thus, it is essential to analyze the migration of contaminant from food contact materials. However, comprehensive analysis has been challenged by low concentration of migrating substances, manifold and complex matrix interference of food contact materials. Therefore, appropriate sample pretreatment methods should be applied before instrumental detection, which is essential to improve the analytical efficiency, sensitivity, and reliability. This paper systematically reviews the development of sample pretreatment methods for analysis of migrating substances from food contact materials in the past decade. To extract volatile and semi-volatile substances, headspace extraction, headspace solid phase microextraction, and purge and trap technique are discussed. For non-volatile substances, solid-liquid extraction and field-assisted extraction are usually used to extract them from food contact materials, while liquid-liquid extraction, solid phase extraction, and their corresponding microextraction techniques play important roles on enrichment process. In addition, new progress in developments of sample pretreatment methods of food contact materials is summarized, covering new devices, specific adsorbents, and sample preparation methods for rapid detection. An outlook of future prospect of sample pretreatment, especially for non-targeted analysis of non-intentionally added substances is briefly discussed.

Thin-layer chromatography combined with surface-enhanced Raman scattering for rapid detection of benzidine and 4-aminobiphenyl in migration from food contact materials based on gold nanoparticle doped metal-organic framework.

In this work, a rapid and sensitive thin-layer chromatography combined with surface-enhanced Raman spectroscopy method was established for rapid detection of benzidine and 4-aminobiphenyl in migration from food contact materials based on Au nanoparticle doped metal-organic framework. Benzidine and 4-aminobiphenyl were firstly separated by thin-layer chromatography to solve the limitation of their overlapping Raman peaks. Then the target molecules were monitored by adding AuNPs/MIL-101(Cr) on the sample spots. Under the optimum conditions, the concentration of benzidine and 4-aminobiphenyl can be quantitatively measured in the range of 2.0-20.0 and1.0-15.0 µg/L, respectively with good linear relationship, and the limits of detection were 0.21 and 0.23 µg/L, respectively. Furthermore, the developed method was applied to analyze benzidine and 4-aminobiphenyl in migration of different food contact materials. The recoveries of benzidine and 4-aminobiphenyl for migration of food contact materials, including paper cups, polypropylene food containers, and polyethylene glycol terephthalate bottles, were 80.6-116.0 and 80.7-118% with relative standard deviations of 1.1-9.1 and 3.1-9.9%, respectively. Surface-enhanced Raman scattering detection was performed conveniently in the on-plate mode without additional elution process. The method shows great potential in rapid monitoring of hazardous substances with overlapping characteristic Raman peaks in food contact materials.

Automatic Indoor as-Built Building Information Models Generation by Using Low-Cost RGB-D Sensors.

To generate indoor as-built building information models (AB BIMs) automatically and economically is a great technological challenge. Many approaches have been developed to address this problem in recent years, but it is far from being settled, particularly for the point cloud segmentation and the extraction of the relationship among different elements due to the complicated indoor environment. This is even more difficult for the low-quality point cloud generated by low-cost scanning equipment. This paper proposes an automatic as-built BIMs generation framework that transforms the noisy 3D point cloud produced by a low-cost RGB-D sensor (about 708 USD for data collection equipment, 379 USD for the Structure sensor and 329 USD for iPad) to the as-built BIMs, without any manual intervention. The experiment results show that the proposed method has competitive robustness and accuracy, compared to the high-quality Terrestrial Lidar System (TLS), with the element extraction accuracy of 100%, mean dimension reconstruction accuracy of 98.6% and mean area reconstruction accuracy of 93.6%. Also, the proposed framework makes the BIM generation workflows more efficient in both data collection and data processing. In the experiments, the time consumption of data collection for a typical room, with an area of 45-67 m 2 , is reduced to 4-6 min with an RGB-D sensor from 50-60 min with TLS. The processing time to generate BIM models is about half minutes automatically, from around 10 min with a conventional semi-manual method.

A Range-Independent Disparity-Based Calibration Model for Structured Light Pattern-Based RGBD Sensor.

Consumer-grade RGBD sensors that provide both colour and depth information have many potential applications, such as robotics control, localization, and mapping, due to their low cost and simple operation. However, the depth measurement provided by consumer-grade RGBD sensors is still inadequate for many high-precision applications, such as rich 3D reconstruction, accurate object recognition and precise localization, due to the fact that the systematic errors of RGB sensors increase exponentially with the ranging distance. Most existing calibration models for depth measurement must be carried out with different distances. In this paper, we reveal the mechanism of how an infrared (IR) camera and IR projector contribute to the overall non-centrosymmetric distortion of a structured light pattern-based RGBD sensor. Then, a new two-step calibration method for RGBD sensors based on the disparity measurement is proposed, which is range-independent and has full frame coverage. Three independent calibration models are used for the calibration for the three main components of the RGBD sensor errors: the infrared camera distortion, the infrared projection distortion, and the infrared cone-caused bias. Experiments show the proposed calibration method can provide precise calibration results in full-range and full-frame coverage of depth measurement. The offset in the edge area of long-range depth (8 m) is reduced from 86 cm to 30 cm, and the relative error is reduced from 11% to 3% of the range distance. Overall, at far range the proposed calibration method can improve the depth accuracy by 70% in the central region of depth frame and 65% in the edge region.

A hybrid triazine-imine core-shell magnetic covalent organic polymer for analysis of pesticides in fruit samples by ultra high performance liquid chromatography with tandem mass spectrometry.

A novel hybrid triazine-imine core-shell magnetic covalent organic polymer with high adsorption capacity and excellent stability was fabricated by surface-assisted in situ growth technique. The composite possesses porous and extended π-conjugated system, and was applied as the magnetic sorbent for efficient enrichment and rapid separation of pesticides. A new analytical method for simultaneous determination of eight pesticides in fruit samples was developed by magnetic solid phase extraction combined with ultra high performance liquid chromatography and tandem mass spectrometry. The effect of extraction time, desorption time, and the type of desorption solvent on the extraction efficiency were evaluated. The established method shows good repeatability and high sensitivity. The repeatability of this method was estimated with relative standard deviations in the range of 0.7-7.0% (n = 5) for the same batch, and 1.7-10% (n = 3) for batch to batch. Good linearity for eight pesticides was obtained with coefficient of determination in the range of 0.9942-0.9990. Limit of detections ranged from 0.4 to 1.2 ng/L. Real sample determination showed that four and two pesticides were detected in strawberry and grape, respectively. The results demonstrated that the established method was efficient, sensitive, and convenient for trace determination of pesticides in fruit samples.