RESUMEN
2D Dion-Jacobson (DJ) perovskites have emerged as promising photovoltaic materials, but the insulating organic spacer has hindered the efficient charge transport. Herein, we successfully synthesized a terthiophene-based semiconductor spacer, namely, 3ThDMA, for 2D DJ perovskite. An interesting finding is that the energy levels of 3ThDMA extensively overlap with the inorganic components and directly contribute to the band formation of (3ThDMA)PbI4, leading to enhanced charge transport across the organic spacer layers, whereas no such orbital interactions were found in (UDA)PbI4, a DJ perovskite based on 1,11-undecanediaminum (UDA). The devices based on (3ThDMA)MAn-1PbnI3n+1 (nominal n = 5) obtained a champion efficiency of 15.25%, which is a record efficiency for 2D DJ perovskite solar cells using long-conjugated spacers (conjugated rings ≥ 3) and a 22.60% efficiency for 3ThDMA-treated 3D PSCs. Our findings provide an important insight into understanding the orbital interactions in 2D DJ perovskite using an organic semiconductor spacer for efficient solar cells.
RESUMEN
PEDOT: PSS has been widely used as a hole extraction layer (HEL) in organic solar cells (OSCs). However, their acidic nature can potentially corrode the indium tin oxide (ITO) electrode over time, leading to adverse effects on the longevity of the OSCs. Herein, we have developed a class of biphosphonic acid molecules with tunable dipole moments for self-assembled monolayers (SAMs), namely, 3-BPIC(i), 3-BPIC, and 3-BPIC-F, which exhibit an increasing dipole moment in sequence. Compared to centrosymmetric 3-BPIC(i), the axisymmetric 3-BPIC and 3-BPIC-F exhibit higher adsorption energies (Eads) with ITO, shorter interface spacing, more uniform coverage on ITO surface, and better interfacial compatibility with the active layer. Thanks to the incorporation of fluorine atoms, 3-BPIC-F exhibits a deeper highest occupied molecular orbital (HOMO) energy level and a larger dipole moment compared to 3-BPIC, resulting in an enlarged work function (WF) for the ITO/3-BPIC-F substrate. These advantages of 3-BPIC-F could not only improve hole extraction within the device but also lower the interfacial impedance and reduce nonradiative recombination at the interface. As a result, the OSCs using SAM based on 3-BPIC-F obtained a record high efficiency of 19.71%, which is higher than that achieved from the cells based on 3-BPIC(i) (13.54%) and 3-BPIC (19.34%). Importantly, 3-BPIC-F-based OSCs exhibit significantly enhanced stability compared to that utilizing PEDOT:PSS as HEL. Our work offers guidance for the future design of functional molecules for SAMs to realize even higher performance in organic solar cells.
RESUMEN
Constructing low-dimensional/three-dimensional (LD/3D) perovskite solar cells can improve efficiency and stability. However, the design and selection of LD perovskite capping materials are incredibly scarce for inverted perovskite solar cells (PSCs) because LD perovskite capping layers often favor hole extraction and impede electron extraction. Here, we develop a facile and effective strategy to modify the perovskite surface by passivating the surface defects and modulating surface electrical properties by incorporating morpholine hydriodide (MORI) and thiomorpholine hydriodide (SMORI) on the perovskite surface. Compared with the PI treatment that we previously developed, the one-dimensional (1D) perovskite capping layer derived from PI is transformed into a two-dimensional (2D) perovskite capping layer (with MORI or SMORI), achieving dimension regulation. It is shown that the 2D SMORI perovskite capping layer induces more robust surface passivation and stronger n-N homotype 2D/3D heterojunctions, achieving a p-i-n inverted solar cell with an efficiency of 24.55%, which retains 87.6% of its initial efficiency after 1500 h of operation at the maximum power point (MPP). Furthermore, 5 × 5 cm2 perovskite mini-modules are presented, achieving an active-area efficiency of 22.28%. In addition, the quantum well structure in the 2D perovskite capping layer increases the moisture resistance, suppresses ion migration, and improves PSCs' structural and environmental stability.
RESUMEN
Atomicforce microscopy (AFM)-based scanning probing techniques, including Kelvinprobe force microscopy (KPFM) and conductive atomic force microscopy (C-AFM), have been widely applied to investigate thelocal electromagnetic, physical, or molecular characteristics of functional materials on a microscopic scale. The microscopic inhomogeneities of the electronic properties of polycrystalline photovoltaic materials can be examined by these advanced AFM techniques, which bridge the local properties of materials to overall device performance and guide the optimization of the photovoltaic devices. In this review, the critical roles of local optoelectronic heterogeneities, especially at grain interiors (GIs) and grain boundaries (GBs) of polycrystalline photovoltaic materials, including versatile polycrystalline silicon, inorganic compound materials, and emerging halide perovskites, studied by KPFM and C-AFM, are systematically identified. How the band alignment and electrical properties of GIs and GBs affect the carrier transport behavior are discussed from the respective of photovoltaic research. Further exploiting the potential of such AFM-based techniques upon a summary of their up-to-date applications in polycrystalline photovoltaic materials is beneficial to acomprehensive understanding of the design and manipulation principles of thenovel solar cells and facilitating the development of the next-generation photovoltaics and optoelectronics.
RESUMEN
Though Sn-Pb alloyed perovskite solar cells (PSCs) achieved great progress, there is a dilemma to further increase Sn for less-Pb requirement. High Sn ratio (>70%) perovskite exhibits nonstoichiometric Sn:Pb:I at film surface to aggravate Sn2+ oxidation and interface energy mismatch. Here, ternary metal alloyed (FASnI3 )0.7 (MAPb1- x Znx I3 )0.3 (x = 0-3%) is constructed for Pb% < 30% perovskite. Zn with smaller ionic size and stronger ionic interaction than Sn/Pb assists forming high-quality perovskite film with ZnI6 4- enriched at surface to balance Sn:Pb:I ratio. Differing from uniform bulk doping, surface-rich Zn with lower lying orbits pushes down the energy band of perovskite and adjusts the interface energy for efficient charge transfer. The alloyed PSC realizes efficiency of 19.4% at AM1.5 (one of the highest values reported for Pb% < 30% PSCs). Moreover, stronger bonding of ZnâI and SnâI contributes to better durability of ternary perovskite than binary perovskite. This work highlights a novel alloy method for efficient and stable less-Pb PSCs.
RESUMEN
Considering that the hydrophobicity of PTAA as the surface of an inverted perovskite solar cell (PSC) substrate directly influences the crystallization and top surface properties of perovskite films, dual-interface engineering is a significant strategy to obtain excellent PSCs. PFN-Br was inserted into the PTAA/perovskite interface to ensure close interfacial contact and achieve exceptional crystallization, and then the perovskite top surface was covered with 3-PyAI to further improve its interface property. The mechanism of interaction of PFN-Br and 3-PyAI with perovskites was analyzed through various characterization methods. The results showed that the introduction of a hydrophilic interface layer reduces voids and defects at the bottom of the film. Additionally, the existence of 3-PyAI reduces surface defects, optimizes energy level alignment, and decreases non-radiative recombination, which is beneficial for charge transfer. Consequently, the open circuit voltage (VOC) and fill factor (FF) of the optimized device were greatly enhanced, and the champion device showed a power conversion efficiency (PCE) of 22.07%. The unencapsulated device with PFN-Br&3-PyAI can retain 80% of its initial performance after aging in the air atmosphere (25 °C at a relative humidity (RH) of 25%) for 27 days. Moreover, the reverse bias stability of the device was improved, with the reverse breakdown voltage (VRB) reaching -2 V. This work recommends a dual-interface strategy for efficient and reliable PTAA-based PSCs.
RESUMEN
AIM: This study aimed to assess the performance of OpenAI's ChatGPT in generating diagnosis based on chief complaint and cone beam computed tomography (CBCT) radiologic findings. MATERIALS AND METHODS: 102 CBCT reports (48 with dental diseases (DD) and 54 with neoplastic/cystic diseases (N/CD)) were collected. ChatGPT was provided with chief complaint and CBCT radiologic findings. Diagnostic outputs from ChatGPT were scored based on five-point Likert scale. For diagnosis accuracy, the scoring was based on the accuracy of chief complaint related diagnosis and chief complaint unrelated diagnoses (1-5 points); for diagnosis completeness, the scoring was based on how many accurate diagnoses included in ChatGPT's output for one case (1-5 points); for text quality, the scoring was based on how many text errors included in ChatGPT's output for one case (1-5 points). For 54 N/CD cases, the consistence of the diagnosis generated by ChatGPT with pathological diagnosis was also calculated. The constitution of text errors in ChatGPT's outputs was evaluated. RESULTS: After subjective ratings by expert reviewers on a five-point Likert scale, the final score of diagnosis accuracy, diagnosis completeness and text quality of ChatGPT was 3.7, 4.5 and 4.6 for the 102 cases. For diagnostic accuracy, it performed significantly better on N/CD (3.8/5) compared to DD (3.6/5). For 54 N/CD cases, 21(38.9%) cases have first diagnosis completely consistent with pathological diagnosis. No text errors were observed in 88.7% of all the 390 text items. CONCLUSION: ChatGPT showed potential in generating radiographic diagnosis based on chief complaint and radiologic findings. However, the performance of ChatGPT varied with task complexity, necessitating professional oversight due to a certain error rate.
Asunto(s)
Inteligencia Artificial , Tomografía Computarizada de Haz Cónico , Diagnóstico por Computador , HumanosRESUMEN
AIM: To investigate the differences of the nasal soft and hard tissue asymmetry in postoperative patients with unilateral cleft lip and palate (UCLP) between adolescence and adulthood, and to explore the correlation of nasal soft and hard tissue asymmetry. METHODS: CT data from 47 repaired UCLP patients were included and divided into two groups:1. adolescent group: 23 patients (15 males, 8 females; age: 10-12 years old). 2. adult group: 24 patients (16 males, 8 females; age:18-32 years old). The three-dimensional asymmetry in nasal soft and hard tissues was analyzed. Additionally, the correlation between nasal soft and hard tissue asymmetry was also analyzed. RESULTS: Both the adolescent group and adult group showed asymmetries in nasal soft and hard tissues. Compared to the adolescent group, the adult group had a significantly increased horizontal asymmetry of nasal soft tissues Sbal (P < 0.05). Furthermore, the sagittal asymmetry of soft tissue Glat (P < 0.05), Sbal (P < 0.001), Sni (P < 0.001) and hard tissue LPA (P < 0.05) also increased significantly. In the adult group, there were more landmarks with a correlation between the asymmetry of nasal hard tissue and soft tissue compared to the adolescent group. There were moderate to strong correlations between nasal hard and soft tissue symmetries in the horizontal and sagittal directions (0.444 < r < 764), but no correlation in the vertical direction in the adult group (P > 0.05). CONCLUSIONS: The asymmetry of nasal soft and hard tissues in patients with repaired UCLP becomes more apparent in the horizontal and sagittal dimensions from adolescence to adulthood. The correlation between the asymmetry of nasal hard tissue and soft tissue becomes stronger in the horizontal and sagittal dimensions. These factors should be taken into account when performing treatment for repaired UCLP patients in adolescence and adulthood.
Asunto(s)
Labio Leporino , Fisura del Paladar , Masculino , Adulto , Femenino , Humanos , Adolescente , Niño , Adulto Joven , Labio Leporino/diagnóstico por imagen , Labio Leporino/cirugía , Fisura del Paladar/diagnóstico por imagen , Fisura del Paladar/cirugía , Nariz/diagnóstico por imagen , Tomografía Computarizada por Rayos X , Cefalometría/métodosRESUMEN
Chondrocytes are unique resident cells in the articular cartilage, and the pathological changes of them can lead to the occurrence of osteoarthritis(OA). Ligusticum cycloprolactam(LIGc) are derivatives of Z-ligustilide(LIG), a pharmacodynamic marker of Angelica sinensis, which has various biological functions such as anti-inflammation and inhibition of cell apoptosis. However, its protective effect on chondrocytes in the case of OA and the underlying mechanism remain unclear. This study conducted in vitro experiments to explore the molecular mechanism of LIGc in protecting chondrocytes from OA. The inflammation model of rat OA chondrocyte model was established by using interleukin-1ß(IL-1ß) to induce. LIGc alone and combined with glycyrrhizic acid(GA), a blocker of the high mobility group box-1 protein(HMGB1)/Toll-like receptor 4(TLR4)/nuclear factor-kappa B(NF-κB) signaling pathway, were used to intervene in the model, and the therapeutic effects were systematically evaluated. The viability of chondrocytes treated with different concentrations of LIGc was measured by the cell counting kit-8(CCK-8), and the optimal LIGc concentration was screened out. Annexin V-FITC/PI apoptosis detection kit was employed to examine the apoptosis of chondrocytes in each group. The enzyme-linked immunosorbent assay(ELISA) was employed to measure the expression of cyclooxygenase-2(COX-2), prostaglandin-2(PGE2), and tumor necrosis factor-alpha(TNF-α) in the supernatant of chondrocytes in each group. Western blot was employed to determine the protein levels of B-cell lymphoma-2(Bcl-2), Bcl-2-associated X protein(Bax), caspase-3, HMGB1, TLR4, and NF-κB p65. The mRNA levels of HMGB1, TLR4, NF-κB p65, and myeloid differentiation factor 88(MyD88) in chondrocytes were determined by real-time fluorescent quantitative PCR(RT-qPCR). The safe concentration range of LIGc on chondrocytes was determined by CCK-8, and then the optimal concentration of LIGc for exerting the effect was clarified. Under the intervention of IL-1ß, the rat chondrocyte model of OA was successfully established. The modeled chondrocytes showed increased apoptosis rate, promoted expression of COX-2, PGE2, and TNF-α, up-regulated protein levels of Bax, caspase-3, HMGB1, TLR4, and NF-κB p65 and mRNA levels of HMGB1, TLR4, NF-κB p65, and MyD88, and down-regulated protein level of Bcl-2. However, LIGc reversed the IL-1ß-induced changes of the above factors. Moreover, LIGc combined with GA showed more significant reversal effect than LIGc alone. These fin-dings indicate that LIGc extracted and derived from the traditional Chinese medicine A. sinensis can inhibit the inflammatory response of chondrocytes and reduce the apoptosis of chondrocytes, and this effect may be related to the HMGB1/TLR4/NF-κB signaling pathway. The pharmacological effect of LIGc on protecting chondrocytes has potential value in delaying the progression of OA and improving the clinical symptoms of patients, and deserves further study.
Asunto(s)
Proteína HMGB1 , Ligusticum , Osteoartritis , Humanos , Ratas , Animales , FN-kappa B/genética , FN-kappa B/metabolismo , Condrocitos , Caspasa 3/metabolismo , Proteína X Asociada a bcl-2/metabolismo , Ciclooxigenasa 2/genética , Ciclooxigenasa 2/metabolismo , Interleucina-1beta/genética , Interleucina-1beta/metabolismo , Proteína HMGB1/genética , Proteína HMGB1/metabolismo , Proteína HMGB1/farmacología , Dinoprostona , Factor 88 de Diferenciación Mieloide/metabolismo , Receptor Toll-Like 4/genética , Receptor Toll-Like 4/metabolismo , Factor de Necrosis Tumoral alfa/metabolismo , Transducción de Señal , Inflamación/metabolismo , Osteoartritis/tratamiento farmacológico , Osteoartritis/genética , Apoptosis , ARN Mensajero/metabolismoRESUMEN
Layered two-dimensional (2D) perovskites are emerging as promising optoelectronic materials owing to their excellent environmental stability. Regulating the dipole moment of organic spacers has the potential to reduce the exciton binding energy (Eb ) of 2D perovskites and improve their photovoltaic performance. Here, we developed two azetidine-based secondary ammonium spacers with different electron-withdrawing groups, namely 3-hydroxyazatidine (3-OHAz) and 3,3-difluoroazetidine (3,3-DFAz) spacers, for 2D Ruddlesden-Popper (RP) perovskites. It was found that the large dipole moment of the fluorinated dipole spacer could effectively enhance the interaction between organic spacers and inorganic layers, leading to improved charge dissociation in 2D RP perovskite. In contrast to 3-OHAz spacer, the 2D perovskite using 3,3-DFAz as spacer also shows improved film quality, optimized energy level alignment, and reduced exciton binding energy. As a result, the 2D perovskite (n=4) device based on 3,3-DFAz yields an outstanding efficiency of 19.28 %, surpassing that of the 3-OHAz-Pb device (PCE=11.35 %). The efficiency was further improved to 19.85 % when using mixed A-site cation of MA0.95 FA0.05 . This work provides an effective strategy for modulating the energy level alignment and reducing the Eb by regulating the dipole moment of organic spacers, ultimately enabling the development of high-performance 2D perovskite solar cells.
RESUMEN
Ptychography is a form of lens-free coherent diffractive imaging now used extensively in electron and synchrotron-based X-ray microscopy. In its near-field implementation, it offers a route to quantitative phase imaging at an accuracy and resolution competitive with holography, with the added advantages of extended field of view and blind deconvolution of the illumination beam profile from the sample image. In this paper we show how near-field ptychography can be combined with a multi-slice model, adding to this list of advantages the unique ability to recover high-resolution phase images of larger samples, whose thickness places them beyond the depth of field of alternative methods.
RESUMEN
As a promising photovoltaic technology, halide perovskite solar cells (PSCs) have recently attracted wide attention. This work presents a systematic simulation of low bandgap formamidinium tin iodide (FASnI3)-based p-n heterojunction PSCs to investigate the effects of multiple optoelectronic variations on the photovoltaic performance. The structures of the simulated devices are n-i-p, electron transport layer-free (ETL-free), hole transport layer-free (HTL-free), and inverted HTL-free. The simulation is conducted with the Solar Cell Capacitance Simulator (SCAPS-1D). The power conversion efficiencies (PCEs) dramatically decrease when the acceptor doping density (NA) of the absorber layer exceeds 1016 cm-3. For all devices, the photovoltaic parameters dramatically decrease when the absorber defect density (Nt) is over 1015 cm-3, and the best absorber layer thickness is 1000 nm. It should be pointed out that the Nt and the interface defect layer (IDL) are the primary culprits that seriously affect the device performance. When the interfacial defect density (Nit) exceeds 1012 cm-3, PCEs begin to decline significantly. Therefore, paying attention to these defect layers is necessary to improve the PCE. Furthermore, the proper conduction band offset (CBO) between the electron transport layer (ETL) and absorber layer positively affects PSCs' performance. These simulation results help fabricate highly efficient and environment-friendly narrow bandgap PSCs.
RESUMEN
The conjugated organic semiconductor spacers have drawn wide attention in two-dimensional (2D) perovskites and formamidinium (FA) has been widely used as A-site cation in high-performance 3D perovskite solar cells (PSCs). However, the FA-based semiconductor spacers have rarely been investigated in 2D Ruddlesden-Popper (RP) perovskites. Here, we developed two FA-based spacers containing thieno[3,2-b]thiophene (TT) and 2,2'-bithiophene (BT) units, namely TTFA and BTFA, respectively, for 2D RP PSCs. The nucleation and crystallization kinetics of TTFA-Pb and BTFA-Pb from sol-gel to film were investigated using in situ optical microscopy and in situ grazing incidence wide-angle X-ray scattering (GIWAXS) measurements. It is found that the TTFA spacer could reduce the energy barrier of nucleation and induces crystal vertical orientation of 2D perovskite by forming larger clusters in precursor solution, resulting in much improved film quality. Benefiting from the enlarged crystal grains, reduced exciton binding energy, and decreased electron-phonon coupling coefficient, the photovoltaic device based on (TTFA)2 MAn-1 Pbn I3n+1 (n=5) achieved a champion efficiency of 19.41 %, which is a record for 2D RP PSCs with FA-based spacers. Our work provides deep understanding of the nucleation and crystallization process of 2D RP perovskite films and highlights the great potential of FA-based semiconductor spacers in highly efficient 2D PSCs.
RESUMEN
In polycrystalline perovskites, grain boundaries (GBs) that isolate grains determine the optoelectronic properties of a semiconductor, and hence affect the photovoltaic performance of a solar cell. Photocurrent and photovoltage are affected by the microscopic structure of perovskites but are difficult to quantify on the intragrain length scale and are often treated as homogeneous within the photoactive layer. Here, the nanoscale through-film and lateral photoresponse of large-grained perovskite are studied by photoconductive atomic force microscopy. Photocurrent collection along GBs relies on the formation of adjacent grains, exhibiting GB to GB heterogeneity. Regarding to the spatially correlated heterogeneity, the photovoltage of grains deduced from the photoresponse curves at specific positions is larger than that of GBs by up to 0.4 V, suggesting that the photovoltage loss mainly originates from the shunting of GBs through the whole perovskite layer. These spatial heterogeneities are alleviated by depositing a capping layer onto the perovskite layer, highlighting the role of the inserted layer between the perovskite and electrode in real solar cells. This research reveals the heterogeneity of GBs and its influence on photovoltage that actually occurs in virtual solar cells, which is crucial for optimizing perovskite-based solar cells.
RESUMEN
Carrier-envelope-phase (CEP) stable optical pulses combined with state-of-the-art scanning tunneling microscopy (STM) can track and control ultrafast electronic tunneling currents. On the basis of nonequilibrium Green's function formalism, we present a time and frequency domain theoretical study of CEP-stable pulse-induced tunneling currents between an STM tip and a metal substrate. It is revealed that the experimentally observed phase shift between the maximum tunneling current and maximum electric field is caused by the third-order response to the electric field. The shift is also found to be sensitive to the duration of pulses. The tunneling process can thus be precisely manipulated by varying the phase and duration of these pulses.
RESUMEN
OBJECTIVES: Evaluating the diagnostic efficiency of deep learning models to diagnose vertical root fracture in vivo on cone-beam CT (CBCT) images. MATERIALS AND METHODS: The CBCT images of 276 teeth (138 VRF teeth and 138 non-VRF teeth) were enrolled and analyzed retrospectively. The diagnostic results of these teeth were confirmed by two chief radiologists. There were two experimental groups: auto-selection group and manual selection group. A total of 552 regions of interest of teeth were cropped in manual selection group and 1118 regions of interest of teeth were cropped in auto-selection group. Three deep learning networks (ResNet50, VGG19 and DenseNet169) were used for diagnosis (3:1 for training and testing). The diagnostic efficiencies (accuracy, sensitivity, specificity, and area under the curve (AUC)) of three networks were calculated in two experiment groups. Meanwhile, 552 teeth images in manual selection group were diagnosed by a radiologist. The diagnostic efficiencies of the three deep learning network models in two experiment groups and the radiologist were calculated. RESULTS: In manual selection group, ResNet50 presented highest accuracy and sensitivity for diagnosing VRF teeth. The accuracy, sensitivity, specificity and AUC was 97.8%, 97.0%, 98.5%, and 0.99, the radiologist presented accuracy, sensitivity, and specificity as 95.3%, 96.4 and 94.2%. In auto-selection group, ResNet50 presented highest accuracy and sensitivity for diagnosing VRF teeth, the accuracy, sensitivity, specificity and AUC was 91.4%, 92.1%, 90.7% and 0.96. CONCLUSION: In manual selection group, ResNet50 presented higher diagnostic efficiency in diagnosis of in vivo VRF teeth than VGG19, DensenNet169 and radiologist with 2 years of experience. In auto-selection group, Resnet50 also presented higher diagnostic efficiency in diagnosis of in vivo VRF teeth than VGG19 and DensenNet169. This makes it a promising auxiliary diagnostic technique to screen for VRF teeth.
Asunto(s)
Aprendizaje Profundo , Fracturas de los Dientes , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Estudios Retrospectivos , Fracturas de los Dientes/diagnóstico por imagen , Raíz del Diente/diagnóstico por imagenRESUMEN
Examination of a recent open-system Ehrenfest dynamics simulation suggests that a vibration-mediate resonance may play a pivotal role in the charge transfer across a donor-acceptor interface in an organic solar cell. Based on this, a concise dissipative two-level electronic system coupled to a molecular vibrational mode is proposed and solved quantum mechanically. It is found that the charge transfer is enhanced substantially when the vibrational energy quanta is equal to the electronic energy loss across the interface. This vibration-mediate resonant charge transfer process is ultrafast, occurring within 100 fs, comparable to experimental findings. The open-system Ehrenfest dynamics simulation of the two-level model is carried out, and similar results are obtained, which confirms further that the earlier open-system Ehrenfest dynamics simulation indeed correctly predicted the occurrence of the resonant charge transfer across the donor-acceptor interface.
RESUMEN
Mesoporous n-i-p perovskite solar cells (PeSCs) demonstrate attractive potential for obtaining high power conversion efficiencies (PCEs), by employing inorganic electron transport layers (ETLs). However, these ETLs composed of dual layers (a condense layer and a mesoporous layer) suffer the composite process and high sintering temperature. Here, we demonstrate a simple and efficient process to improve the device performance of PeSCs by using a textured SnO2 film. Self-aged sol-gel SnO2 solution after spin coating results in a textured structure without sacrificing the surface coverage. Excellent light trapping ability is achieved by optimizing the aged time of sol-gel SnO2 solution, which mimics the evolution of the conventional mesoporous layer. Such a SnO2 textured structure provides a large contact area for rapid charge extraction, and alleviates interfacial recombination loss. Therefore, this PeSC yields an optimal PCE of 19%, which is prominent in state-of-the-art SnO2-based devices. These results indicate that one-step solution processed SnO2 with a textured structure offers a simple and efficient way to improve the device performance of PeSCs without a complex process.
RESUMEN
Vortex beam generators are promising to improve the transmission data rate and enlarge the communication capacity due to the fact that they inherently carry the orbital angular momentum (OAM). However, current available devices are limited because of high profiles and low efficiencies, especially for the transmissive case. Here, we propose a new strategy to design an ultrathin (0.07λ0) transmissive Pancharatnam-Berry (PB) metasurface with nearly unit transmittance. The carefully optimized metasurface integrates an anisotropic crossbar structure with positive permittivity and a holey metallic ring resonator with negative permittivity based on certain criterions placed on both sides of a dielectric substrate, which realize an exact π phase difference due to the control of permittivities at both polarizations. As a proof of concept, a microwave vortex beam generator is designed, fabricated and experimentally characterized. Both measured far-field and near-field characterizations are in excellent agreement with numerical simulations, indicating that our transmissive PB meta-device (operating at 10.6 GHz) exhibits a maximum experimental efficiency of 87%. Our findings can motivate the realizations of high-performance transmissive PB meta-devices with a very low profile or operation at other frequency domains.
RESUMEN
We propose and demonstrate a scalable mode division multiplexing scheme based on orbital angular momentum modes in ring core fibers. In this scheme, the high-order mode groups of a ring core fiber are sufficiently de-coupled by the large differential effective refractive index so that multiple-input multiple-output (MIMO) equalization is only used for crosstalk equalization within each mode group. We design and fabricate a graded-index ring core fiber that supports 5 mode groups with low inter-mode-group coupling, small intra-mode-group differential group delay, and small group velocity dispersion slope over the C-band for the high-order mode groups. We implement a two-dimensional wavelength- and mode-division multiplexed transmission experiment involving 10 wavelengths and 2 mode groups each with 4 OAM modes, transmitting 32 GBaud Nyquist QPSK signals over all 80 channels. An aggregate capacity of 5.12 Tb/s and an overall spectral efficiency of 9 bit/s/Hz over 10 km are realized, only using modular 4x4 MIMO processing with 15 taps to recover signals from the intra-mode-group mode coupling. Given the fixed number of modes in each mode group and the low inter-mode-group coupling in ring core fibres, our scheme strikes a balance in the trade-off between system capacity and digital signal processing complexity, and therefore has good potential for capacity upscaling at an expense of only modularly increasing the number of mode-groups with fixed-size (4x4) MIMO blocks.