High-resolution X-ray luminescence extension imaging.

Current X-ray imaging technologies involving flat-panel detectors have difficulty in imaging three-dimensional objects because fabrication of large-area, flexible, silicon-based photodetectors on highly curved surfaces remains a challenge1-3. Here we demonstrate ultralong-lived X-ray trapping for flat-panel-free, high-resolution, three-dimensional imaging using a series of solution-processable, lanthanide-doped nanoscintillators. Corroborated by quantum mechanical simulations of defect formation and electronic structures, our experimental characterizations reveal that slow hopping of trapped electrons due to radiation-triggered anionic migration in host lattices can induce more than 30 days of persistent radioluminescence. We further demonstrate X-ray luminescence extension imaging with resolution greater than 20 line pairs per millimetre and optical memory longer than 15 days. These findings provide insight into mechanisms underlying X-ray energy conversion through enduring electron trapping and offer a paradigm to motivate future research in wearable X-ray detectors for patient-centred radiography and mammography, imaging-guided therapeutics, high-energy physics and deep learning in radiology.

General synthesis of two-dimensional van der Waals heterostructure arrays.

Two-dimensional van der Waals heterostructures (vdWHs) have attracted considerable interest1-4. However, most vdWHs reported so far  are created by an arduous micromechanical exfoliation and manual restacking process5, which-although versatile for proof-of-concept demonstrations6-16 and fundamental studies17-30-is clearly not scalable for practical technologies. Here we report a general synthetic strategy for two-dimensional vdWH arrays between metallic transition-metal dichalcogenides (m-TMDs) and semiconducting TMDs (s-TMDs). By selectively patterning nucleation sites on monolayer or bilayer s-TMDs, we precisely control the nucleation and growth of diverse m-TMDs with designable periodic arrangements and tunable lateral dimensions at the predesignated spatial locations, producing a series of vdWH arrays, including VSe2/WSe2, NiTe2/WSe2, CoTe2/WSe2, NbTe2/WSe2, VS2/WSe2, VSe2/MoS2 and VSe2/WS2. Systematic scanning transmission electron microscopy studies reveal nearly ideal vdW interfaces with widely tunable moiré superlattices. With the atomically clean vdW interface, we further show that the m-TMDs function as highly reliable synthetic vdW contacts for the underlying WSe2 with excellent device performance and yield, delivering a high ON-current density of up to 900 microamperes per micrometre in bilayer WSe2 transistors. This general synthesis of diverse two-dimensional vdWH arrays provides a versatile material platform for exploring exotic physics and promises a scalable pathway to high-performance devices.

Atomic coordination environment engineering of bimetallic alloy nanostructures for efficient ammonia electrosynthesis from nitrate.

Electrochemical nitrate reduction reaction (NO3RR) to ammonia has been regarded as a promising strategy to balance the global nitrogen cycle. However, it still suffers from poor Faradaic efficiency (FE) and limited yield rate for ammonia production on heterogeneous electrocatalysts, especially in neutral solutions. Herein, we report one-pot synthesis of ultrathin nanosheet-assembled RuFe nanoflowers with low-coordinated Ru sites to enhance NO3RR performances in neutral electrolyte. Significantly, RuFe nanoflowers exhibit outstanding ammonia FE of 92.9% and yield rate of 38.68 mg h-1 mgcat-1 (64.47 mg h-1 mgRu-1) at -0.30 and -0.65 V (vs. reversible hydrogen electrode), respectively. Experimental studies and theoretical calculations reveal that RuFe nanoflowers with low-coordinated Ru sites are highly electroactive with an increased d-band center to guarantee efficient electron transfer, leading to low energy barriers of nitrate reduction. The demonstration of rechargeable zinc-nitrate batteries with large-specific capacity using RuFe nanoflowers indicates their great potential in next-generation electrochemical energy systems.

Constructing molecule-metal relay catalysis over heterophase metallene for high-performance rechargeable zinc-nitrate/ethanol batteries.

Zinc-nitrate batteries can integrate energy supply, ammonia electrosynthesis, and sewage disposal into one electrochemical device. However, current zinc-nitrate batteries still severely suffer from the limited energy density and poor rechargeability. Here, we report the synthesis of tetraphenylporphyrin (tpp)-modified heterophase (amorphous/crystalline) rhodium-copper alloy metallenes (RhCu M-tpp). Using RhCu M-tpp as a bifunctional catalyst for nitrate reduction reaction (NO3RR) and ethanol oxidation reaction in neutral solution, a highly rechargeable and low-overpotential zinc-nitrate/ethanol battery is successfully constructed, which exhibits outstanding energy density of 117364.6 Wh kg-1cat, superior rate capability, excellent cycling stability of ~400 cycles, and potential ammonium acetate production. Ex/in situ experimental studies and theoretical calculations reveal that there is a molecule-metal relay catalysis in NO3RR over RhCu M-tpp that significantly facilitates the ammonia selectivity and reaction kinetics via a low energy barrier pathway. This work provides an effective design strategy of multifunctional metal-based catalysts toward the high-performance zinc-based hybrid energy systems.

Pt-Modified High Entropy Rare Earth Oxide for Efficient Hydrogen Evolution in pH-Universal Environments.

The development of efficient and stable catalysts for hydrogen production from electrolytic water in a wide pH range is of great significance in alleviating the energy crisis. Herein, Pt nanoparticles (NPs) anchored on the vacancy of high entropy rare earth oxides (HEREOs) were prepared for the first time for highly efficient hydrogen production by water electrolysis. The prepared Pt-(LaCeSmYErGdYb)O showed excellent electrochemical performances, which require only 12, 57, and 77 mV to achieve a current density of 100 mA cm-2 in 0.5 M H2SO4, 1.0 M KOH, and 1.0 M PBS environments, respectively. In addition, Pt-(LaCeSmYErGdYb)O has successfully worked at 400 mA cm-2 @ 60 °C for 100 h in 0.5 M H2SO4, presenting the high mass activity of 37.7 A mg-1Pt and turnover frequency (TOF) value of 38.2 s-1 @ 12 mV, which is far superior to the recently reported hydrogen evolution reaction (HER) catalysts. Density functional theory (DFT) calculations have revealed that the interactions between Pt and HEREO have optimized the electronic structures for electron transfer and the binding strength of intermediates. This further leads to optimized proton binding and water dissociation, supporting the highly efficient and robust HER performances in different environments. This work provides a new idea for the design of efficient RE-based electrocatalysts.

Facet-Controlled Synthesis of Unconventional-Phase Metal Alloys for Highly Efficient Hydrogen Oxidation.

Facet control and phase engineering of metal nanomaterials are both important strategies to regulate their physicochemical properties and improve their applications. However, it is still a challenge to tune the exposed facets of metal nanomaterials with unconventional crystal phases, hindering the exploration of the facet effects on their properties and functions. In this work, by using Pd nanoparticles with unconventional hexagonal close-packed (hcp, 2H type) phase, referred to as 2H-Pd, as seeds, a selective epitaxial growth method is developed to tune the predominant growth directions of secondary materials on 2H-Pd, forming Pd@NiRh nanoplates (NPLs) and nanorods (NRs) with 2H phase, referred to as 2H-Pd@2H-NiRh NPLs and NRs, respectively. The 2H-Pd@2H-NiRh NRs expose more (100)h and (101)h facets on the 2H-NiRh shells compared to the 2H-Pd@2H-NiRh NPLs. Impressively, when used as electrocatalysts toward hydrogen oxidation reaction (HOR), the 2H-Pd@2H-NiRh NRs show superior activity compared to the NiRh alloy with conventional face-centered cubic (fcc) phase (fcc-NiRh) and the 2H-Pd@2H-NiRh NPLs, revealing the crucial role of facet control in enhancing the catalytic performance of unconventional-phase metal nanomaterials. Density functional theory (DFT) calculations further unravel that the excellent HOR activity of 2H-Pd@2H-NiRh NRs can be attributed to the more exposed (100)h and (101)h facets on the 2H-NiRh shells, which possess high electron transfer efficiency, optimized H* binding energy, enhanced OH* binding energy, and a low energy barrier for the rate-determining step during the HOR process.

Integrating Ozone Pollutant Elimination in N2 Electrolysis to Produce Nitrate with Reduced Reaction Steps.

The synthesis of nitrate by the electrochemical N2 oxidation reaction (NOR) is currently one of the most promising routes. However, the traditional generation of nitrate depends on the oxidation reaction between N2 and H2O (or ·OH), which involves complex reaction steps and intermediates, showing strong competition from oxygen evolution reaction (OER). Here, an effective NOR method is proposed to directly oxidize N2 by using O3 as a reactive oxygen source to reduce the reaction step. Electrochemical tests demonstrate that the nitrate yield of Pd-Mn3O4/CNT electrocatalyst reaches the milligram level, which is the highest yield reported so far for electrocatalytic NOR. Quantitative characterization is employed to establish a comprehensive set of benchmarks to confirm the intrinsic nature of nitrogen activation and test the O3-mediated reaction mechanism. Density functional theory (DFT) calculations show that the heterostructure Pd-Mn3O4 leads to a strong adsorption preference for N2 and O3, which greatly reduces the activation energy barrier for N2. This accelerates the synthesis of nitrate based on the direct formation mechanism, which reduces energy barriers and the reaction steps, thus increasing the performance of electrocatalytic nitrate production. The techno-economic analysis underscores the promising feasibility and sustainable economic value of the presented method.

Highly Active CoNi-CoN3 Composite Sites Synergistically Accelerate Oxygen Electrode Reactions in Rechargeable Zinc-Air Batteries.

Reaching rapid reaction kinetics of oxygen reduction (ORR) and oxygen evolution reactions (OER) is critical for realizing efficient rechargeable zinc-air batteries (ZABs). Herein, a novel CoNi-CoN3 composite site containing CoNi alloyed nanoparticles and CoN3 moieties is first constructed in N-doped carbon nanosheet matrix (CoNi-CoN3/C). Benefiting from the high electroactivity of CoNi-CoN3 composite sites and large surface area, CoNi-CoN3/C shows a superior half-wave potential (0.88 V versus RHE) for ORR and a small overpotential (360 mV) for OER at 10 mA cm-2. Theoretical calculations have demonstrated that the introduction of CoNi alloys has modulated the electronic distributions near the CoN3 moiety, inducing the d-band center of CoNi-CoN3 composite site to shift down, thus stabilizing the valence state of Co active sites and balancing the adsorption of OER/ORR intermediates. Accordingly, the reaction energy trends exhibit optimized overpotentials for OER/ORR, leading to superior battery performances. For aqueous and flexible quasi-solid-state rechargeable ZABs with CoNi-CoN3/C as catalyst, a large power density (250 mW cm-2) and high specific capacity (804 mAh g-1) are achieved. The in-depth understanding of the electroactivity enhancement mechanism of interactive metal nanoparticles and metal coordinated with nitrogen (MNx) moieties is crucial for designing novel high-performance metal/nitrogen-doped carbon (M─N─C) catalysts.

All-inorganic perovskite nanocrystal scintillators.

The rising demand for radiation detection materials in many applications has led to extensive research on scintillators1-3. The ability of a scintillator to absorb high-energy (kiloelectronvolt-scale) X-ray photons and convert the absorbed energy into low-energy visible photons is critical for applications in radiation exposure monitoring, security inspection, X-ray astronomy and medical radiography4,5. However, conventional scintillators are generally synthesized by crystallization at a high temperature and their radioluminescence is difficult to tune across the visible spectrum. Here we describe experimental investigations of a series of all-inorganic perovskite nanocrystals comprising caesium and lead atoms and their response to X-ray irradiation. These nanocrystal scintillators exhibit strong X-ray absorption and intense radioluminescence at visible wavelengths. Unlike bulk inorganic scintillators, these perovskite nanomaterials are solution-processable at a relatively low temperature and can generate X-ray-induced emissions that are easily tunable across the visible spectrum by tailoring the anionic component of colloidal precursors during their synthesis. These features allow the fabrication of flexible and highly sensitive X-ray detectors with a detection limit of 13 nanograys per second, which is about 400 times lower than typical medical imaging doses. We show that these colour-tunable perovskite nanocrystal scintillators can provide a convenient visualization tool for X-ray radiography, as the associated image can be directly recorded by standard digital cameras. We also demonstrate their direct integration with commercial flat-panel imagers and their utility in examining electronic circuit boards under low-dose X-ray illumination.

Oscillatory Order-Disorder Transition during Layer-by-Layer Growth of Indium Selenide.

It is important to understand the polymorph transition and crystal-amorphous phase transition in In2Se3 to tap the potential of this material for resistive memory storage. By monitoring layer-by-layer growth of ß-In2Se3 during molecular beam epitaxy (MBE), we are able to identify a cyclical order-disorder transition characterized by a periodic alternation between a glassy-like metastable subunit cell film consisting of n < 5 sublayers (nth layers = the number of subunit cell layers), and a highly crystalline ß-In2Se3 at n = 5 layers. The glassy phase shows an odd-even alternation between the indium-cluster layer (n = 1, 3) and an In-Se solid solution (n = 2, 4), which suggests the ability of In and Se atoms to diffuse, aggregate, and intermix. These dynamic natures of In and Se atoms contribute to a defect-driven memory resistive behavior in current-voltage sweeps that is different from the ferroelectric switching of α-In2Se3.

Self-Powered and Self-Recoverable Multimodal Force Sensors Based on Trap State and Interfacial Electron Transfer.

Multi-dimensional force sensing that combines intensity, location, area and the like could gather a wealth of information from mechanical stimuli. Developing materials with force-induced optical and electrical dual responses would provide unique opportunities to multi-dimensional force sensing, with electrical signals quantifying the force amplitude and the luminescence output providing spatial distribution of force. However, the reliance on external power supply and high-energy excitation source brings significant challenges to the applicability of multi-dimensional force sensors. Here we reported the mechanical energy-driven and sunlight-activated materials with force-induced dual responses, and investigated the underlying mechanisms of self-sustainable force sensing. Theoretical analysis and experimental data unraveled that trap-controlled luminescence and interfacial electron transfer play a major role in force-induced optical and electrical output. These materials were manufactured into pressure sensor with renewable dual-mode output for quantifying and visualization of pressures by electrical and optical output, respectively, without power supply and high-energy irradiation. The quantification of tactile sensation and stimuli localization of mice highlighted the multi-dimensional sensing ability of the sensor. Overall, this self-powered pressure sensor with multimodal output provides more modalities of force sensing, poised to change the way that intelligent devices sense with the world.

Controlled Synthesis of Unconventional Phase Alloy Nanobranches for Highly Selective Electrocatalytic Nitrite Reduction to Ammonia.

The controlled synthesis of metal nanomaterials with unconventional phases is of significant importance to develop high-performance catalysts for various applications. However, it remains challenging to modulate the atomic arrangements of metal nanomaterials, especially the alloy nanostructures that involve different metals with distinct redox potentials. Here we report the general one-pot synthesis of IrNi, IrRhNi and IrFeNi alloy nanobranches with unconventional hexagonal close-packed (hcp) phase. Notably, the as-synthesized hcp IrNi nanobranches demonstrate excellent catalytic performance towards electrochemical nitrite reduction reaction (NO2RR), with superior NH3 Faradaic efficiency and yield rate of 98.2 % and 34.6 mg h-1 mgcat -1 (75.5 mg h-1 mgIr -1) at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. Ex/in situ characterizations and theoretical calculations reveal that the Ir-Ni interactions within hcp IrNi alloy improve electron transfer to benefit both nitrite activation and active hydrogen generation, leading to a stronger reaction trend of NO2RR by greatly reducing energy barriers of rate-determining step.

Size Effects of Highly Dispersed Bismuth Nanoparticles on Electrocatalytic Reduction of Carbon Dioxide to Formic Acid.

Electrocatalytic reduction of carbon dioxide into value-added chemical fuels is a promising way to achieve carbon neutrality. Bismuth-based materials have been considered as favorable electrocatalysts for converting carbon dioxide to formic acid. Moreover, size-dependent catalysis offers significant advantages in catalyzed heterogeneous chemical processes. However, the size effects of bismuth nanoparticles on formic acid production have not been fully explored. Here, we prepared Bi nanoparticles uniformly supported on porous TiO2 substrate electrocatalytic materials by in situ segregation of the Bi element from Bi4Ti3O12. The Bi-TiO2 electrocatalyst with Bi nanoparticles of 2.83 nm displays a Faradaic efficiency of greater than 90% over a wide potential range of 400 mV. Theoretical calculations have also demonstrated subtle electronic structural evolutions induced by the size variations of Bi nanoparticles, where the 2.83 nm Bi nanoparticles display the most active p-band and d-band centers to guarantee high electroactivity toward CO2RR.

Cooperative Rh-O5/Ni(Fe) Site for Efficient Biomass Upgrading Coupled with H2 Production.

Designing efficient and durable bifunctional catalysts for 5-hydroxymethylfurfural (HMF) oxidation reaction (HMFOR) and hydrogen evolution reaction (HER) is desirable for the co-production of biomass-upgraded chemicals and sustainable hydrogen, which is limited by the competitive adsorption of hydroxyl species (OHads) and HMF molecules. Here, we report a class of Rh-O5/Ni(Fe) atomic site on nanoporous mesh-type layered double hydroxides with atomic-scale cooperative adsorption centers for highly active and stable alkaline HMFOR and HER catalysis. A low cell voltage of 1.48 V is required to achieve 100 mA cm-2 in an integrated electrolysis system along with excellent stability (>100 h). Operando infrared and X-ray absorption spectroscopic probes unveil that HMF molecules are selectively adsorbed and activated over the single-atom Rh sites and oxidized by in situ-formed electrophilic OHads species on neighboring Ni sites. Theoretical studies further demonstrate that the strong d-d orbital coupling interactions between atomic-level Rh and surrounding Ni atoms in the special Rh-O5/Ni(Fe) structure can greatly facilitate surface electronic exchange-and-transfer capabilities with the adsorbates (OHads and HMF molecules) and intermediates for efficient HMFOR and HER. We also reveal that the Fe sites in Rh-O5/Ni(Fe) structure can promote the electrocatalytic stability of the catalyst. Our findings provide new insights into catalyst design for complex reactions involving competitive adsorptions of multiple intermediates.

Cu-Co Dual-Atom Catalysts Supported on Hierarchical USY Zeolites for an Efficient Cross-Dehydrogenative C(sp2)-N Coupling Reaction.

A cross-coupling reaction via the dehydrogenative route over heterogeneous solid atomic catalysts offers practical solutions toward an economical and sustainable elaboration of simple organic substrates. The current utilization of this technology is, however, hampered by limited molecular definition of many solid catalysts. Here, we report the development of Cu-M dual-atom catalysts (where M = Co, Ni, Cu, and Zn) supported on a hierarchical USY zeolite to mediate efficient dehydrogenative cross-coupling of unprotected phenols with amine partners. Over 80% isolated yields have been attained over Cu-Co-USY, which shows much superior reactivity when compared with our Cu1 and other Cu-M analogues. This amination reaction has hence involved simple and non-forceful reaction condition requirements. The superior reactivity can be attributed to (1) the specifically designed bimetallic Cu-Co active sites within the micropore for "co-adsorption-co-activation" of the reaction substrates and (2) the facile intracrystalline (meso/micropore) diffusion of the heterocyclic organic substrates. This study offers critical insights into the engineering of next-generation solid atomic catalysts with complex reaction steps.

Enhanced Metal-Support Interactions Boost the Electrocatalytic Water Splitting of Supported Ruthenium Nanoparticles on a Ni3 N/NiO Heterojunction at Industrial Current Density.

Developing highly efficient and stable hydrogen production catalysts for electrochemical water splitting (EWS) at industrial current densities remains a great challenge. Herein, we proposed a heterostructure-induced-strategy to optimize the metal-support interaction (MSI) and the EWS activity of Ru-Ni3 N/NiO. Density functional theory (DFT) calculations firstly predicted that the Ni3 N/NiO-heterostructures can improve the structural stability, electronic distributions, and orbital coupling of Ru-Ni3 N/NiO compared to Ru-Ni3 N and Ru-NiO, which accordingly decreases energy barriers and increases the electroactivity for EWS. As a proof-of-concept, the Ru-Ni3 N/NiO catalyst with a 2D Ni3 N/NiO-heterostructures nanosheet array, uniformly dispersed Ru nanoparticles, and strong MSI, was successfully constructed in the experiment, which exhibited excellent HER and OER activity with overpotentials of 190 mV and 385 mV at 1000 mA cm-2 , respectively. Furthermore, the Ru-Ni3 N/NiO-based EWS device can realize an industrial current density (1000 mA cm-2 ) at 1.74 V and 1.80 V under alkaline pure water and seawater conditions, respectively. Additionally, it also achieves a high durability of 1000 h (@ 500 mA cm-2 ) in alkaline pure water.

Balancing Activity and Stability in Spinel Cobalt Oxides through Geometrical Sites Occupation towards Efficient Electrocatalytic Oxygen Evolution.

Designing active and stable oxygen evolution reaction (OER) catalysts are vitally important to various energy conversion devices. Herein, we introduce elements Ni and Mn into (Co)tet (Co2 )oct O4 nanosheets (NSs) at fixed geometrical sites, including Mnoct , Nioct , and Nitet , to optimize the initial geometrical structure and modulate the CoCo2 O4 surface from oxygen-excess to oxygen-deficiency. The pristine (Ni,Mn)-(Co)tet (Co2 )oct O4 NSs shows excellent OER activity with an overpotential of 281.6 mV at a current density of 10 mA cm-2 . Moreover, without damaging their initial activity, the activated (Act)-(Ni,Mn)-(Co)tet (Co2 )oct O4 NSs after surface reconstruction exhibit long-term stability of 100 h under 10 mA cm-2 , 50 mA cm-2 , or even 100 mA cm-2 . The optimal balance between electroactivity and stability leads to remarkable OER performances, providing a pivotal guideline for designing ideal electrocatalysts and inspiring more works to focus on the dynamic change of each occupation site component.

A General Synthetic Method for High-Entropy Alloy Subnanometer Ribbons.

High-entropy alloys (HEAs) are attracting intensive attention due to their broad compositional tunability and interesting catalytic properties. However, precisely shaping the HEAs into suprathin low-dimensional nanostructures for achieving diverse applications remains an enormous challenge owing to their intrinsic thermodynamic instability. Herein we propose a new and general low-temperature method for incorporating up to eight metallic elements into one single-phase subnanometer ribbon to achieve the thinnest HEA metal materials in the world. We experimentally demonstrate that synthetic processes for suprathin HEA subnanometer ribbons (SNRs) include (1) different metal atom nucleation via galvanic exchange reaction between different metal precursors and Ag nanowire template, (2) co-reduction of different metal precursors on nanowire template, and (3) the removal of the inner Ag core. Density functional theory (DFT) calculations reveal that the crystallization and stabilization of HEA SNRs strongly depend on the "highly dynamic" Ag from the template, and the crystallization levels of HEA subnanometer ribbons are closely correlated with the concentration of Pt and Pd. We demonstrate that the present synthetic method enables the flexible control of components and concentrations in HEAs SNRs for achieving a library of HEA SNRs and also superior electrocatalytic properties. The well-designed HEA SNRs show great improvement in catalyzing the oxygen reduction reaction of fuel cells and also high discharge capacity, low charge overpotential, and excellent durability for Li-O2 batteries. DFT calculations reveal the superior electrochemical performances are attributed to the strong reduction capability from high-concentration reductive elements in HEAs, while the other elements guarantee the site-to-site efficient electron transfer.

Activated Ni-O-Ir Enhanced Electron Transfer for Boosting Oxygen Evolution Reaction Activity of LaNi1-x Irx O3.

Tuning the structure of the active center of catalysts to atomic level provides the most efficient utilization of the active component, which plays an especially important role for precious metals. In this study, the liquid phase ion exchange method is used to introduce atomic Ir into LaNiO3 perovskite oxide, which shows excellent catalytic performance in the oxygen evolution reaction (OER). The catalyst, LaNi0.96 Ir0.04 O3 , with the optimal concentration of Ir, displays an overpotential of just 280 mV at 10 mA cm-2 . The introduced Ir enriches the surface electron density significantly, which not only improves site-to-site electron transfer between O and Ni sites but also allows stable adsorption of the intermediates. The results of cyclic voltammetry tests reveal the superior overpotential and remarkable efficiency of the OER process because of the strong interactions in Ni-O-Ir. Moreover, the Ir atom inhibits the participation of a lattice oxygen oxidation mechanism (LOM) in LaNiO3 that guarantees the stability of the catalyst in alkaline conditions. It is anticipated that this work will be instrumental for the preparation and study of a broad range of atomic metal-doped perovskite oxides for water splitting.

Boosting the Electrocatalytic Oxygen Evolution of Perovskite LaCo1- x Fex O3 by the Construction of Yolk-Shell Nanostructures and Electronic Modulation.

Realizing the rational design of perovskite oxides with controllable compositions and nanostructures remains a tremendous challenge for the development of efficient electrocatalysts. Herein, a ligand-assisted synthetic strategy to fabricate perovskite oxides LaCo1- x Fex O3 with yolk-shell nanostructures is developed. Benefiting from the unique structural and compositional merits, LaCo0.75 Fe0.25 O3 exhibits an overpotential of 310 mV at a current density of 10 mA cm-2 and long-term stability of 100 h for the oxygen evolution reaction. In situ Raman spectroscopy demonstrates that Fe substitution facilitates the pre-oxidation of Co sites and induces the surface reconstruction into active Co oxyhydroxides at a relatively lower applied potential, guaranteeing excellent catalytic performances. Density functional theory calculations unravel that the appropriate introduction of Fe into perovskite LaCoO3 leads to the improved electroactivity and durability of the catalyst for the oxygen evolution reaction (OER). Fe-3d orbitals show a pinning effect on Co-3d orbitals to maintain the stable valence state of Co sites at the low overpotential of the OER. Furthermore, Zn-air batteries (ZABs) assembled with LaCo0.75 Fe0.25 O3 display a high open circuit potential of 1.47 V, superior energy density of 905 Wh kg-1  Zn , and excellent stability in a large temperature range. This work supplies novel insights into the future developments of perovskite-based electrocatalysts.