Simultaneous determination of synephrine, arecoline, and norisoboldine in Chinese patent medicine Si-Mo-Tang oral liquid preparation by strong cation exchange high performance liquid chromatography.

CONTEXT: Chinese patent medicine Si-Mo-Tang oral liquid preparation (SMT) is composed of Aucklandia luppa Decne (Compositae), Citrus aurantium Linn (Rutaceae), Lindera aggregata (Sims) Kosterm (Lauraceae), and Areca catechu Linn (Arecaceae). Studies of SMT have been impeded due to the lack of quality control methods. OBJECTIVE: This study aimed to simultaneously determine three alkaloids including synephrine, arecoline, and norisoboldine in SMT for the first time. MATERIALS AND METHODS: A strong cation exchange (SCX) high performance liquid chromatography (HPLC) method was developed to simultaneously determine synephrine, arecoline, and norisoboldine in SMT, and was compared with ion-pairing chromatography using regular reversed-phase chromatography columns. System suitability parameters of synephrine, arecoline, and norisoboldine using the SCX chromatography column were investigated. RESULTS: Results demonstrated that good separations were achieved on an Agilent SCX (250 × 4.6 mm, 5 µm) column at 35 °C. The mobile phase consisting of methanol-0.2% phosphoric acid was delivered at a constant flow of 1.0 mL min(-1) and the eluent was monitored at 215 nm. The HPLC method showed good linearity for the examined concentration ranges of 2.55-255.0, 1.30-208.0, and 2.06-201.6 µg mL(-1) for synephrine, arecoline, and norisoboldine, respectively. The limits of quantification (S/N = 10) were 2.55, 1.30, and 2.06 µg mL(-1), the limits of detection (S/N = 3) were 1.53, 0.78, and 1.21 µg mL(-1), and average recoveries were 98.99, 95.63 and 99.04%, respectively, for synephrine, arecoline, and norisoboldine. DISCUSSION AND CONCLUSION: This method has been successfully applied to determine synephrine, arecoline, and norisoboldine in Chinese patent medicine SMT.

Optimization of microwave-assisted extraction of protopine and allocryptopine from stems of Macleaya cordata (Willd) R. Br. using response surface methodology.

The purpose of the research was to investigate the multiple response optimizations for the extraction of protopine and allocryptopine from the stems of Macleaya cordata (Willd) R. Br. by using microwave-assisted extraction (MAE). A three-level, three-factor Box-Behnken design of response surface methodology was used to develop response model, and desirability function was employed to optimize the effects of main extraction parameters. Three variables, ethanol concentration (20-80%, v/v), extraction temperature (30-70 degrees C) and solvent/solid ratio (10:1 to 30:1, mL/g), were investigated in this study. The results showed that the optimum parameters of MAE were ethanol concentration of 45.2 % (v/v), extraction temperature of 54.7 degrees C and solvent/solid ratio of 20.4:1 (mL/g). Under these conditions, the extraction yields of protopine and allocryptopine were 89.4 and 102.0%, respectively, and the extracta sicca yield was 12.5%. The combination use of response surface methodology, Box-Behnken design and the appropriate desirability function could provide an insight into a lab-scale MAE process, and help to develop procedures for commercial production of active ingredients from medical plants.

Screening and identification of radical scavengers from Neo-Taraxacum siphonanthum by online rapid screening method and nuclear magnetic resonance experiments.

An online rapid screening method, the high-performance liquid chromatography (HPLC)-diode array detector (DAD)-radical scavenging detection (RSD)-electrospray ionization (ESI)-mass spectroscopy (MS)/MS system, was developed for the screening and identification of radical scavengers from Neo-Taraxacum siphonanthum, a new species found in China in 1989. For further characterization, the target compounds were isolated by silica column chromatography, preparative high-performance liquid chromatography (HPLC), HSCCC, and Sephadex LH-20 column chromatography and elucidated on the basis of ultraviolet (UV), ESI-MS/MS, and nuclear magnetic resonance (NMR) spectroscopy, as well as the chemical analysis. Eighteen antioxidative polyphenols (5 caffeic acid derivatives and 13 flavonoid derivatives) were characterized from Neo-T. siphonanthum. The distribution of all compounds was discussed in a chemosystematic context, which suggested that the genera Neo-Taraxacum and Taraxacum might relate chemosystematically.

All-trans retinoic acid inhibits cobalt chloride-induced apoptosis in PC12 cells: role of the dimethylarginine dimethylaminohydrolase/asymmetric dimethylarginine pathway.

Previous studies have shown that the endogenous nitric oxide synthase inhibitor asymmetric dimethylarginine (ADMA) and its specific hydrolase dimethylarginine dimethylaminohydrolase (DDAH) are involved in the regulation of apoptosis in different cell types. In the present study, we investigated the role of the DDAH/ADMA pathway in cobalt chloride (CoCl(2))-induced apoptosis and the antiapoptotic effect of all-trans retinoic acid (atRA) in undifferentiated pheochromocytoma (PC12) cells. Treatment of CoCl(2) (125 microM) for 48 hr significantly induced the apoptosis of PC12 cells, concomitantly with increased intracellular reactive oxygen species (ROS) production and caspase-3 activity. CoCl(2) treatment also decreased the activity of DDAH and the expression of DDAH2 (mRNA and protein), resulting in an increased level of ADMA. All these alterations induced by CoCl(2) were attenuated by atRA (0.1, 1, or 10 microM). Interestingly, the antiapoptotic effects of atRA were inhibited by DDAH2 small RNA interference. In contrast, DDAH2 overexpression inhibited the proapoptotic effects of CoCl(2). We also found that treatment of exogenous ADMA (3, 10, or 30 microM) induced the apoptosis of PC12 cells in a concentration- and time-dependent manner, which was inhibited by the antioxidant or the caspase-3 inhibitor. These findings suggest that the modulation of the DDAH/ADMA/ROS pathway plays an important role in CoCl(2)-induced apoptosis and the antiapoptotic effects of atRA in undifferentiated PC12 cells.

Synthesis and fluorescence properties of lanthanide(III) complexes of a novel bis(pyrazolyl-carboxyl)pyridine-based ligand.

A novel bis-pyrazolyl-carboxyl ligand, 2,6-bis(5-methyl-3-carboxypyrazol-1-ylmethyl)pyridine (L), was designed and synthesized and its several lanthanide(III) complexes Eu(III), Tb(III), Sm(III) and Gd(III) were successfully prepared and characterized in detail based on elemental analysis, infrared, mass, proton nuclear magnetic resonance spectroscopy and TG-DTA studies. Analysis of the IR spectra suggested that each of the lanthanide metal ions coordinated to the ligand via the carbonyl oxygen atoms and the nitrogen atom of the pyridine ring and pyrazole rings. The fluorescence spectra exhibits that the Tb(III) complex and the Eu(III) complex display characteristic metal-centered fluorescence in solid state while ligand fluorescence is completely quenched. However, the Tb(III) complex displays more effective fluorescence than the other complexes, which is attributed to especial effectivity in transferring energy from the lowest triplet energy level of the ligand (L) onto the excited state ((5)D(4)) of Tb(III).

Bis[µ-2-(2-naphth-oxy)acetato]bis-{aqua[2-(2-naphth-oxy)acetato]zinc(II)}.

The title binuclear Zn(II) compound, [Zn(2)(C(12)H(9)O(3))(4)(H(2)O)(2)], is centrosymmetric. Each Zn atom is coordinated by two bridging 2-naphthoxyacetate anions, one terminal 2-naphth-oxy-acetate anion and one water mol-ecule in a distorted ZnO(4) tetra-hedral geometry. The naphthalene system of the bridging ligand is nearly perpendicular to the naphthalene of the terminal ligand, with a dihedral angle of 78.26 (6)°. Within the binuclear mol-ecule the Zn⋯Zn separation is 3.815 (5) Å. In the crystal structure, inter-molecular O-H⋯O hydrogen bonding between the water mol-ecule and carboxyl-ate groups helps to stabilize the crystal structure.

Preparation and characterization of Saccharomyces cerevisiae alcohol dehydrogenase immobilized on magnetic nanoparticles.

The covalently immobilized of Saccharomyces cerevisiae alcohol dehydrogenase (SCAD) to magnetic Fe(3)O(4) nanoparticles via glutaraldehyde coupling reaction was studied. The magnetic Fe(3)O(4) nanoparticles were prepared by hydrothermal method using H(2)O(2) as an oxidizer. Functionalization of surface-modified magnetic particles was performed by the covalent binding of chitosan onto the surface. The amino functional group on the magnetic Fe(3)O(4)-chitosan particles surface and the amino group of the dehydrogenase were coupled with glutaraldehyde. The immobilization process did not affect the size and structure of magnetic nanoparticles. For the reduction of phenylglyoxylic acid by immobilized SCAD, the kinetic analysis data indicated that the immobilized SCAD retained 48.77% activity of its original activity. The activation energy within 20-40 degrees C, the maximum specific activity and the Michaelis constants for phenylglyoxylic acid were 7.79 KJ mol(-1), 279.33 nmol min(-1) and 37.77 mmol l(-1), respectively. Furthermore, the immobilized SCAD enhanced thermal stability and good durability in the repeated use after recovered by magnetic separations.

Furanoeremophilanes from Ligularia atroviolacea.

A new furanoeremophilane, 1alpha-chloro-6beta-isobutyroxy-9-oxo-10beta-hydroxy-furanoeremophilane (1) was isolated from the root of Ligularia atroviolacea and identified mainly on the basis of detailed spectral analyses including X-ray. Moreover, five known furanoeremophilanes,1alpha-hydroxy-6beta-isobutyroxy-9-oxo-10beta-H-furanoeremophilane (2), 1alpha-hydroxy-6beta-isobutyroxy-9-oxo-10alpha-H-furanoeremophilane (3), 1alpha,10beta-dihydroxy-6beta-angeloyloxy-9-oxo-furanoeremophilane (4), furanoeremophil-3-en-15,6alpha-olide (5) and furanoeremophil-15beta,6alpha-olide (6) were isolated from the same source.

[Progress in the research of carbon nanotubes as drug carriers].

Research and development of new drug carriers are crucial to the research of drugs. Due to their unique hollow structure and nano-diameter, carbon nanotubes (CNTs) can be used as drug carriers. Functionalization of CNTs with peptides, proteins, nucleic acids or even drug molecules, the so obtained functionalized CNTs can be used as carriers to deliver bioactive molecules into cells without causing any toxicity. The research progress of CNTs as drug carriers in recent years is summarized, and the CNTs' cytotoxicity and their ability to penetrate cells are discussed, and the methods of functionalizing carbon nanotubes are also mentioned in the paper. Along with the advancement of CNTs in drug carriers system, the relationship between the way to functionalize CNTs and the so obtained modified CNTs' ability to penetrate into cells, including the effect of dimension, should be further studied. Preparation of functionalized CNTs with high solubility and low toxicity as drug carriers will be the main research areas in the near future.

A rapid, simple, specific liquid chromatographic-electrospray mass spectrometry method for the determination of finasteride in human plasma and its application to pharmacokinetic study.

A fast, accurate, sensitive, selective and reliable method using reversed-phase high-performance liquid chromatography-mass spectrometry coupling with an electrospray ionization interface was developed and validated for the determination of finasteride in human plasma. After deprotienation with acetonitrile, centrifugation, evaporation to dryness and dissolving in mobile phase, satisfactory separation was achieved on a Hypersil-Keystone C(18) reversed-phase column using a mobile phase consisting of acetonitrile-water (46:54, v/v), 0.1% acetic acid and 0.1% trifluoracetic acid. Carbamazepine (IS) was used as internal standard. This method involved the use of the [M+H](+) ions of finasteride and IS at m/z 373 and 237 with the selective ion monitoring (SIM) mode. The calibration curve was linear in the range of 0.2-120 ng ml(-1). The limit of quantification for finasteride in plasma was 0.2 ng ml(-1) with good accuracy and precision. The intra-assay precision and accuracy were in the range of 2.1-11.2% and -1.3% to 8.5%, respectively. The inter-assay precision and accuracy were in the order of 3.4-12.1% and -1.5% to 11.5%, respectively. The mean sample extract recoveries of the method were higher than 85% and 74% for finasteride and internal standard (IS), respectively. The assay has been successfully used to estimate the pharmacokinetics of finasteride after oral administration of a 5mg tablet of finasteride to 24 healthy volunteers.

Preparation and properties of modified chitosan as potential matrix materials for drug sustained-release beads.

Modified chitosan such as chitosan alpha-ketoglutaric acid (KCTS) and hydroxamated chitosan alpha-ketoglutaric acid (HKCTS) were successfully prepared. The modified chitosan were employed in the formation of drug-loaded, iron(III)-crosslinked polymeric beads. The produced polymers were characterized by IR, NMR, WXRD and DSC measurements. The resulting beads were evaluated in vitro as drug prolonging and potentially orally administered delivery system. Theophylline was used as the loaded model drug. The generated beads proved to be successful in prolonging drug release. The release kinetics was evaluated by fitting the experimental data to standard release equations (zero-, first- and Higuchi equation). The best fit was found with Higuchi model for the polymeric beads.

Preparation and characterization of glutaraldehyde cross-linked O-carboxymethylchitosan microspheres for controlled delivery of pazufloxacin mesilate.

O-carboxymethylchitosan (OCMC) microspheres containing an antibiotic drug pazufloxacin mesilate (PM) have been successfully prepared by emulsion cross-linking using glutaraldehyde (GA). Various manufacturing parameters, including amount of cross-linking agent and OCMC:PM ratios were altered to optimize process variables during the microspheres production. The structure and morphology were characterized by Fourier transform infrared (FT-IR), wide-angle X-ray diffraction (WXRD) and scanning electron microscopy (SEM). The swelling and releasing behaviors of the microspheres at pH 1.2 and 7.4 media were investigated. The results revealed that the microspheres had a spherical, rough morphology and with a narrow size distribution. The degree of swelling of microspheres at pH 7.4 media was higher than that at pH 1.2 media. The microspheres proved to be successful in prolonging drug release. The release of PM was found to depend upon the extent of matrix cross-linking and drug loading. The release profiles of PM from OCMC microspheres were found to be biphasic with a burst release followed by a gradual release phase, and followed the Higuchi matrix model.

Mechanisms and kinetics of chelating reaction between novel chitosan derivatives and Zn(II).

Modified chitosan such as chitosan alpha-ketoglutaric acid (KCTS) and hydroxamated chitosan alpha-ketoglutaric acid (HKCTS) are successfully prepared. The resulting polymers were characterized by 13C NMR and X-ray diffraction (XRD), respectively. A adsorption system was applied to study the adsorption of Zn(II) ion onto chitosan derivatives. The isothermal sorption kinetics of chitosan derivatives for Zn(II) ion has been investigated. The kinetics experimental data correlated well with the second-order kinetic model, indicating that the chemical sorption was the rate-limiting step. The adsorption mechanism of chitosan derivatives with Zn(II) was studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The results indicated that the nitrogen in amino group and the oxygen in carboxyl group of KCTS were coordination atoms. N atom of amino group, O atom of hydroxamic acid and O atom of carbonyl group in HKCTS coordinated with Zn(II).

Kinetics of adsorption of Zn(II) ion on chitosan derivatives.

The adsorption of Zn(II) ions from aqueous solution by chitosan derivatives (KCTS and HKCTS) was studied in a batch adsorption system. The adsorption capacities and rates of Zn(II) ions onto chitosan derivatives were evaluated. The adsorption isothermal data could be well interpreted by the Langmuir and Freundlich models. The kinetic experimental data properly correlated with the second-order kinetic model, which indicates that the chemical adsorption is the rate-limiting step. The apparent adsorption activation energy were 25.47 kJ mol- and 5.473 kJ mol-, respectively, and the second-order adsorption constant for KCTS and HKCTS were 0.00311 g (mg min)(-1) and 0.005 g (mg min)(-1), respectively.

Synthesis and herbicidal activity of 2-(7-fluoro-3-oxo- 3,4-dihydro-2H-benzo[b][1,4]oxazin-6-yl)isoindoline-1,3-diones.

The mode of action of 2-(7-fluoro-3-oxo-3,4-dihydro-2H-benzo[b][1,4]oxazin-6-yl)-4,5,6,7-tetrahydro-2H-isoindoline-1,3-diones, including the commercial herbicide flumioxazin, had been identified as inhibition of protoporphyrinogen oxidase (protox). As part of continuous efforts to search for new herbicides with high efficacy, broad-spectrum activity, and safety to crops, flumioxazin and its iodo analogue (B2055) were used as lead compounds for further optimization. Series of novel compounds were prepared by multistep synthetic procedures starting from 5-fluoro-2-nitrophenol. All of the test compounds were structurally confirmed by 1H NMR, IR, mass spectroscopy, and elemental analysis. Preliminary bioassay data showed that some of them possess commercial levels of herbicidal activity comparable to those of other protox-inhibiting herbicides. One of the best compounds, 5-fluoro-2-(7-fluoro-3-oxo-4-(prop-2-ynyl)-3,4-dihydro-2H-benzo[b][1,4]oxazin-6-yl)isoindoline-1,3-dione (8e), has IC50 values for velvetleaf (Abutilon theophrasti Medic) and crabgrass (Digitaria sanguinalis) comparable to thos of B2055. With respect to crop selectivity, compound 8e is similar to flumioxazin. Compound 8e is safe to cotton and maize at a rate of 150 g of active ingredient (ai)/ha or less when applied at pre-emergent stage, and it has the best safety to wheat among the tested crops, showing no injury after post-emergent application at 7.5-30 g of ai/ha.

Preparation and characterization of 5'-phosphodiesterase from barley malt rootlets.

Two 5'- phosphodiesterases (5'-PDE-a and 5'-PDE-b) were isolated from barley malt rootlets, and further purified by gel filtration on Sephadex G-25 and Sephadex G-75. 5'-PDE-a had a pH optimum of 5.0, temperature optimum of 70 degrees C, and specific activity of 0.0143 mM x mg(-1) x min(-1). 5'-PDE -b had a pH optimum of 6.0, temperature optimum of 65 degrees C and specific activity of 0.0125 mM x mg(-1) x min(-1). Both enzymes can be used to hydrolyze RNA to form 5'-nucleotides. The enzymes were quite stable at 70 degrees C for 420 minutes. The K(m) was 0.24 mM for 5'-PDE-a and 0.16 mM for 5'-PDE-b with t-RNA (yeast) as substrate.

Rapid microwave synthesis of chitosan modified carbon nanotube composites.

Chitosan modified multi-walled carbon nanotube composites were synthesized under microwave irradiation. The resultant chitosan modified multi-walled carbon nanotube composites were purified by twice adjusting of pH value of the solution and centrifugating in succession. The surface functional groups of chitosan modified multi-walled carbon nanotube composites are confirmed by Fourier transform infrared spectroscopy and UV-vis spectroscopy. Transmission electron microscopic images further show the morphologic changes of the carbon nanotubes. Thermal gravimetric analysis shows that the chitosan content in the chitosan modified multi-walled carbon nanotube composites is much higher than conventional methods. The whole reaction procedure can be completed in 1 h under microwave irradiation.

Adsorption characteristics of poly(styrene-co-divinylbenzene) resin functionalized with methoxy and phenoxy groups for phenol.

Two macroporous crosslinked poly(styrene-co-divinylbenzene) resins functionalized with methoxy and phenoxy groups, PVBME and PVBPE were prepared and their adsorption characteristics for phenol were studied in hexane as well as in aqueous solution. It was shown that the equilibrium adsorption capacity of phenol onto PVBPE was a little larger than that onto PVBME at the same temperature and equilibrium concentration. The adsorption onto PVBME in hexane can be correlated to Langmuir isotherm model, whereas the semi-empirical Freundlich isotherm model characterized the adsorption onto PVBPE better. The adsorption thermodynamic parameters were calculated and it was found that the adsorption enthalpy, adsorption free energy, and adsorption entropy were all negative, and the adsorption thermodynamic parameters onto PVBPE were more negative than the corresponding ones onto PVBME. The relationship of the adsorption capacity with the equilibrium concentration was linear in aqueous solution. The adsorption was hypersensitive to the solution pH in aqueous solution, and the optimum pH was determined to be 6.0. The adsorption dynamics of phenol onto PVBPE in aqueous solution was investigated and it was seen that the adsorption can be well fitted by the pseudo-first-order rate equation.

Application of high-speed counter-current chromatography for the isolation of antiviral eremophilenolides from Ligularia atroviolacea.

Ligularia is mainly distributed in the western regions of China. Most of the species have been traditionally used in folk medicine for the treatment of hepatitis B, asthma, hemoptysis and pulmonary tuberculosis. In our continuation of research on antiviral components from traditional Chinese medicine, Ligularia atroviolacea was tested for inhibitory effects on hepatitis B virus (HBV). A bioassay-guided phytochemical examination of L. atroviolacea disclosed that its ethyl acetate extract, which was made up of two eremophilenolides, showed suppressive activity on the expression of HBV surface antigen (HBsAg) in the HepG2.2.15 cell line. Then a simple and effective preparative high-speed counter-current chromatography method was successfully developed for the isolation and purification of two main active metabolites, 8beta-hydroxyeremophil-3,7(11)-dien-12,8alpha;15,6alpha-diolide and 8beta-methoxyeremophil-3,7(11)-dien-12,8alpha;15,6alpha-diolide from the ethyl acetate extract of L. atroviolacea by a one-step separation using a two-phase solvent system composed of light petroleum (60-90 degrees C)-ethyl acetate-methanol-water (9:1:8:2, v/v/v). The chemical structures of the two eremophilenolides were identified by ESI-MS, (1)H-NMR and (13)C-NMR analysis. The anti-HBV activity of the two purified compounds was measured; both of them showed suppressive activity on the expression of HBsAg in the HepG2.2.15 cell line. The results support the continued and expanded exploitation and utilization of L. atroviolacea.

Theoretical studies on novel main group metallocene-like complexes involving planar hexacoordinate carbon eta6-B6C2- ligand.

The geometric structures for a novel series of main group 1 and 2 metal atom complexes with planar hexacoordinate carbon dianion (eta6-B6C)2- ligand, involving metallocene-like, K[(eta6-B6C)Ca]n(eta6-B6C)K (n = 1-3) and [(eta6-B6C)Ca]n(eta6-B6C)2- (n = 1, 2), as well as relative pyramidal [(eta6-B6C)M]i- (M = Na, K, and CaCl, i = 1; M = Ca, i = 0) and bipyramidal (eta6-B6C)(CaCl)2, have been optimized to be the local minima on the corresponding potential hypersurfaces at the B3LYP/6-311+G(d) level of theory. Natural bond orbital analysis indicates that the electrostatic interaction between the metal ions and the planar hexacoordinate carbon B6C2- rings plays a crucial role in stabilizing these highly symmetrical complexes. The pi-d interaction in Ca-containing complexes also plays an important role in the stabilization of these molecules. It is found that the Ca2+ cation could be considered the best candidate for (eta6-B6C)2- to build ionic organometallic compounds. In these predicted multideck metallocene-like complexes there exist similarities in many structural properties, such as geometry parameters, Wiberg bond indices, natural atomic charges, atomic electronic configurations, and frontier orbital energies, as well as increments of the dissociation energy (to -[(eta6-B6C)Ca]- units and metal cations) for adding one -[(eta6-B6C)Ca]- unit and so on, which suggests that the -[(eta6-B6C)Ca]- unit could be used as a building block to construct more K[(eta6-B6C)Ca]n(eta6-B6C)K chain-type metallocene-like complexes along their sixfold molecular axis.