Additive Engineering by Bifunctional Guanidine Sulfamate for Highly Efficient and Stable Perovskites Solar Cells.

High efficiency and good stability are the challenges for perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high defect density and internal nonradiative recombination of perovskite (PVK) limit its development. In this work, a facile additive strategy is devised by introducing bifunctional guanidine sulfamate (GuaSM; CH6 N3 + , Gua+ ; H2 N-SO3 - , SM- ) into PVK. The size of Gua+ ion is suitable with Pb(BrI)2 cavity relatively, so it can participate in the formation of low-dimensional PVK when mixed with Pb(BrI)2 . The O and N atoms of SM- can coordinate with Pb2+ . The synergistic effect of the anions and cations effectively reduces the trap density and the recombination in PVK, so that it can improve the efficiency and stability of PSCs. At an optimal concentration of GuaSM (2 mol%), the PSC presents a champion power conversion efficiency of 21.66% and a remarkably improved stability and hysteresis. The results provide a novel strategy for highly efficient and stable PSCs by bifunctional additive.

Counter electrodes in dye-sensitized solar cells.

Dye-sensitized solar cells (DSSCs) are regarded as prospective solar cells for the next generation of photovoltaic technologies and have become research hotspots in the PV field. The counter electrode, as a crucial component of DSSCs, collects electrons from the external circuit and catalyzes the redox reduction in the electrolyte, which has a significant influence on the photovoltaic performance, long-term stability and cost of the devices. Solar cells, dye-sensitized solar cells, as well as the structure, principle, preparation and characterization of counter electrodes are mentioned in the introduction section. The next six sections discuss the counter electrodes based on transparency and flexibility, metals and alloys, carbon materials, conductive polymers, transition metal compounds, and hybrids, respectively. The special features and performance, advantages and disadvantages, preparation, characterization, mechanisms, important events and development histories of various counter electrodes are presented. In the eighth section, the development of counter electrodes is summarized with an outlook. This article panoramically reviews the counter electrodes in DSSCs, which is of great significance for enhancing the development levels of DSSCs and other photoelectrochemical devices.

Carbon-reinforced Ni3S2/Ti3C2Tx MXene composite as an anode for superior-performance lithium-ion capacitors.

Lithium ion capacitors (LICs) are a new generation of energy storage devices that combine the super energy storage capability of lithium ion batteries with the satisfactory power density of supercapacitors. The development of high-performance LICs still faces great challenges due to the unbalanced reaction kinetics at the anode and cathode. Therefore, it is an inevitable need to enhance the electron/ion transfer capability of the anode materials. In this paper, to obtain a superior-rate and high-capacity Ni3S2-based anode, highly conductive Ti3C2Tx MXene sheets were introduced to sever as the carrier of Ni3S2 nanoparticles and simultaneously an amorphous carbon layer which coats onto the surface of Ni3S2 nanoparticles was in-situ generated by the carbonization of dopamine reactant. The as-synthesized Ni3S2/Ti3C2Tx/C composite exhibits a high specific surface area (112.6 m2/g) because of the addition of Ti3C2Tx that can reduce the aggregation of Ni3S2 nanoparticles and the in-situ generated amorphous carbon layer that can suppress the growth of Ni3S2 nanoparticles. The Ni3S2/Ti3C2Tx/C anode possesses a remarkable reversible discharge specific capacity (626.0 mAh/g under 0.2 A/g current density), which increases to 1150.8 mAh/g after 400-cycle charge/discharge measurement at the same measurement condition indicating eminent cyclability, along with superior rate capability. To construct a superior-performance LIC device, a sterculiae lychnophorae derived porous carbon (SLPC) cathode with an average discharge specific capacity of 73.4 mAh/g@0.1A/g was prepared. The Ni3S2/Ti3C2Tx/C//SLPC LIC device with optimal cathode/anode mass ratio has a satisfactory energy density ranging from 32.8 to 119.1 Wh kg-1 at the corresponding power density of 8799.4 to 157.5 W kg-1, together with a prominent capacity retention (95.5 %@1 A/g after 10,000 cycles).

Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells.

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose consequent interfacial energy loss and carrier loss seriously affect the performance and stability of devices. Here, by using spinodal decomposition, a spontaneous solid phase segregation process, in situ introduces a poly(3-hexylthiophene)/perovskite (P3HT/PVK) heterointerface with interpenetrating structure in PSCs. The P3HT/PVK heterointerface tunes the energy alignment, thereby reducing the energy loss at the interface; The P3HT/PVK interpenetrating structure bridges a transport channel, thus decreasing the carrier loss at the interface. The simultaneous mitigation of energy and carrier losses by P3HT/PVK heterointerface enables n-i-p geometry device a power conversion efficiency of 24.53% (certified 23.94%) and excellent stability. These findings demonstrate an ingenious strategy to optimize the performance of PSCs by heterointerface via Spinodal decomposition.

A reversible redox strategy for SWCNT-based supercapacitors using a high-performance electrolyte.

In order to achieve pesudocapacitive performance of single-wall carbon nanotube (SWCNT) electrodes, a high-efficient and reversible redox strategy utilizing a redox-mediated electrolyte for SWCNT-based supercapacitors is reported. In this novel redox-mediated electrolyte, the single-electrode specific capacitance of the supercapacitor is heightened four times, reaching C=162.66 F g(-1) at 1 A g(-1). The quick charge-discharge ability of the supercapacitor is also enhanced, and the relaxation time is as low as 0.58 s. Furthermore, the supercapacitor shows an excellent cycling performance of 96.51 % retention after 4000 cycles. The remarkable results presented here illustrate that the redox strategy is a facile and straightforward approach to improve the performances of SWCNT electrodes.

Synergistic Effect of 2-(Trifluoromethyl) Benzimidazole on the Stability and Performance of Perovskite Solar Cells.

The quality of the perovskite active layer directly impacts the photovoltaic performance of perovskite solar cells (PSCs). Unfortunately, perovskite films produced through solution methods often have a significant number of defects on their surface, which lead to a substantial degradation in the performance of devices. For this reason, a multifunctional additive 2-(trifluoromethyl) benzimidazole (TFMBI) is introduced into perovskite films. Based on the Lewis acid/base coordination principle, the TFMBI double site cooperatively passivates surface defects, inhibiting carrier non-radiative recombination. Simultaneously, the hydrophobic solid group (-CF3) of TFMBI covers the surface, establishing a moisture-oxygen barrier and improving the environmental stability of the devices. In consequence, the power conversion efficiency (PCE) of TFMBI-modified PSCs reached 23.16%, significantly higher than the pristine one with a PCE of 20.62%. Additionally, the unencapsulated target device retained 90.32% of its initial PCE even after being reserved in the air with a relative humidity of 20-30% for 60 days.

Hotspots, Frontiers, and Emerging Trends of Superabsorbent Polymer Research: A Comprehensive Review.

Superabsorbent polymer (SAP) is a kind of functional macromolecule with super-high water absorption and retention properties, which attracts extensive research and has wide application, especially in the areas of hygiene and agriculture. With reference to the Web of Science database, the SAP research literature from 2000 to 2019 is reviewed both quantitatively and qualitatively. By examining research hotspots, top research clusters, the most influential works, the representative frontier literature, and key emerging research trends, a visual panorama of the continuously and significantly increasing SAP research over the past 2 decades was presented, and issues behind the sharp increase in the literature were discovered. The findings are as follows. The top ten keywords/hotspots headed by hydrogel highlight the academic attention on SAP properties and composites. The top ten research themes headed by clay-based composites which boast the longest duration and the strongest impact have revealed the academic preference for application rather than theoretical study. Academically influential scholars and research studies have been acknowledged, and the Wu group was at the forefront of the research; however, more statistically significant works have been less detected in the last 10 years despite the sharper increase in publications. Hydrogel, internal curing, and aerogel are both current advances and future directions.

Surface Reconstruction and In Situ Formation of 2D Layer for Efficient and Stable 2D/3D Perovskite Solar Cells.

The 2D/3D composite structure possesses both the excellent stability of 2D perovskite and the excellent performance of 3D perovskite, which recently have attracted special attention. Different from the popular isopropanol, a novel additive solvent-polypropylene glycol bis (2-aminopropyl ether) (A-PPG) is introduced here to dissolve excess PbI2 and perovskite, and then reconstruct and in situ form the quasi-2D perovskite layer on 3D perovskite bulk. The lone electron pairs of the ether-oxygen and amino in A-PPG can form coordination bonds with Pb2+ . The introduction of A-PPG tunes the energy array of functional layers, passivates defects, and mitigates carrier nonradiative recombination. Consequently, the 2D/3D perovskite device exhibits a championship efficiency of 22.24% with a distinguished open-circuit voltage of 1.21 V (the thermodynamic limit of 1.30 V). Moreover, the 2D/3D device still maintains 90% of the original efficiency in the ambient atmosphere with a relative humidity of 30 ± 10% after 50 days.

Enhancing the photoelectrical performance of dye-sensitized solar cells using TiO2:Eu3+ nanorods.

TiO(2):Eu(3+) nanorods are hydrothermally grown and used to fabricate a bilayer film electrode in a dye-sensitized solar cell. A light-to-electrical energy conversion efficiency of 8.0% and a quantum efficiency of 93.7% (at 575 nm) is achieved in this solar cell. The high efficiency is due to the improvement of ultraviolet light harvesting via a down-conversion luminescence process by the Eu(3+) ion and the increase of light scattering by one-dimensional TiO(2).