RESUMEN
Because hydroxypropyl cellulose (HpC) is a popular polymeric material that forms a liquid crystalline phase in solutions with various kinds of solvents, including water, it is commonly thought that HpC has a typical rod-like structure in solution. In this study, the structures of commercial HpC samples in aqueous solution with average molar substitution numbers (MS) ranging from 3.6 to 3.9 and weight-average molar masses (Mw) ranging from 36 to 740 kg mol-1 were investigated in detail. We first used multiple techniques, including standard static and dynamic light scattering (SLS and DLS), neutron and X-ray scattering experiments, and viscometric measurements, to obtain clear evidence of rod-like structures quantitatively. The dependence of excess scattering intensities for HpC samples under dilute conditions on the magnitude of the scattering vector over a wide range from 8.9 × 10-3 to 3.0 × 10 nm-1 was reasonably described by the form factor of rod particles with length (L) and diameter (d). Although the determined L value was close to the contour length (lc) calculated from the Mw values in the lower Mw range, L became obviously less than lc with increasing Mw. The radius of gyration (Rg) determined via SLS measurements was proportional to L by a factor of approximately 3.5 â¼ â12 over the Mw range examined. These observations revealed that the conformation of HpC molecules changes from an elongated single chain to a certain folded structure, maintaining the shape of the rod-shaped particles. Moreover, the Mw dependencies of the intrinsic viscosities and translational diffusion coefficients of the HpC samples resulting from DLS measurements were reasonably described with a theoretical rod-like particle model, assuming that L and d are identical to those resulting from the scattering behaviors.
Asunto(s)
Celulosa , Agua , Celulosa/química , Celulosa/análogos & derivados , Agua/química , Soluciones , Dispersión Dinámica de Luz , Difracción de Rayos XRESUMEN
In aqueous binary solvents with fluorinated alcohols, 2,2,2-trifluoroethanol (TFE) and 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), and aliphatic alcohols, ethanol (EtOH) and 2-propanol (2-PrOH), the denaturation of hen egg white lysozyme (HEWL) with increasing alcohol mole fraction xA has been investigated in a wide view from the molecular vibration to the secondary and ternary structures. Circular dichroism (CD) measurement showed that the secondary structure of α-helix content of HEWL increases on adding a small amount of the fluorinated alcohol to the aqueous solution, while the ß-sheet content decreases. On the contrary, the secondary structure does not significantly change by the addition of the aliphatic alcohols. Correspondingly, the infrared (IR) spectroscopic measurements revealed that the amide I band red-shifts on the addition of the fluorinated alcohol. However, the band remains unchanged in the aliphatic alcohol systems with increasing alcohol content. To observe the ternary structure of HEWL, small-angle neutron scattering (SANS) experiments with H/D substitution technique have been applied to the HEWL solutions. The SANS experiments were successful in revealing the details of how the geometry of the HEWL changes as a function of xA. The SANS profiles indicated the spherical structure of HEWL in all of the alcohol systems in the xA range examined. The mean radius of HEWL in the two fluorinated alcohol systems increases from â¼16 to â¼18 Å during the change in the secondary structure against the increase in the fluorinated alcohol content. On contrast, the radius does not significantly change in both aliphatic alcohol systems below xA = 0.3 but expands to â¼19 Å as the alcohol content is close to the limitation of the HEWL solubility. According to the present results, together with our knowledge of the alcohol cluster formation and the interaction of the trifluoromethyl (CF3) groups with the hydrophobic moieties of biomolecules, the effects of alcohols on the denaturation of the protein have been discussed on a molecular scale.
Asunto(s)
Dicroismo Circular , Muramidasa , Desnaturalización Proteica , Dispersión del Ángulo Pequeño , Muramidasa/química , Muramidasa/metabolismo , Animales , Difracción de Neutrones , Espectrofotometría Infrarroja , Pollos , Alcoholes/químicaRESUMEN
Polyglycerol fatty acid esters (PGFEs) are common food additives. PGFE-based formulations exhibit high structural stability, however, the stability mechanism of the micellar structures has not been yet elucidated. In this study, nanostructural analysis was performed using small-angle neutron and X-ray scattering (SANS and SAXS) measurements to reveal the mechanism of the structural stability of PGFE-coenzyme Q10 (CoQ10) mixtures as a CoQ10 formulation. Pure PGFE formed multilamellar vesicles, whereas PGFE-CoQ10 formed spherical micelles. Furthermore, when the amount of added water increased, the PGFE-CoQ10 micellar size and the amount of water in the micelles remained unchanged. A model-fitting analysis of the SANS results suggested that the CoQ10 molecules were introduced between the surfactants, forming a palisade-type structure. The high structural stability of the PGFE-CoQ10 micelles was attributed to two factors: proper spreading of the hydrophilic head chains and inhibition of the change of the amount of water inside the micelles by the PGFE heads and quinone ring of CoQ10. This indicates that PGFE-CoQ10 can function in water while maintaining the micellar structure formed in the storage solution. The findings of this study are important for the safety and nano-hazard aspects of PGFE-CoQ10 formulations.
Asunto(s)
Ácidos Grasos , Micelas , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Ácidos Grasos/química , Ésteres/química , AguaRESUMEN
HYPOTHESIS: Hydroxypropyl methylcellulose phthalate (HPMCP) is an enteric polymer that has been employed in drug delivery systems to delay the release of the encapsulated active pharmaceutical ingredients through its pH-responsive solubility change. This has been recently demonstrated as an effective means for delaying the drug release from gelatin/HPMCP hydrogels at gastric pH values. However, structural characteristics of HPMCP agglomeration in gelatin/HPMCP hydrogels is not well understood thus limiting further tailoring of their material properties. EXPERIMENTS: We investigated the multiscale structure of a gelatin/HPMCP hydrogel (1:1 by weight) between pH 2 and 6 at 37 °C, i.e. above the upper critical solution transition temperature of gelatin, using small-angle X-ray scattering and contrast-variation small-angle neutron scattering to understand the pH-responsive structure of HPMCP and the cross-correlation between gelatin and HPMCP. FINDINGS: Agglomeration of HPMCP between pH 2 and 4 was evidenced by the formation of mass fractal structures, with a fractal dimension ranging from 1.5 to 2.7, comprising primary particles with a radius of gyration ranging from 70 to 140 Å. Blending with gelatin influenced the fractal structure of HPMCP and the primary particle size. Gelatin and HPMCP exhibited negative cross-correlation in all probed length scales and pH values, which was attributed to volume-exclusion interaction in a double-network-like solution architecture.
Asunto(s)
Gelatina , Metilcelulosa , Tamaño de la Partícula , Dispersión del Ángulo Pequeño , Gelatina/química , Concentración de Iones de Hidrógeno , Metilcelulosa/química , Metilcelulosa/análogos & derivados , Hidrogeles/química , Estructura MolecularRESUMEN
The co-assembly of polyelectrolytes (PE) with proteins offers a promising approach for designing complex structures with customizable morphologies, charge distribution, and stability for targeted cargo delivery. However, the complexity of protein structure limits our ability to predict the properties of the formed nanoparticles, and our goal is to identify the key triggers of the morphological transition in protein/PE complexes and evaluate their ability to encapsulate multivalent ionic drugs. A positively charged PE can assemble with a protein at pH above isoelectric point due to the electrostatic attraction and disassemble at pH below isoelectric point due to the repulsion. The additional hydrophilic block of the polymer should stabilize the particles in solution and enable them to encapsulate a negatively charged drug in the presence of PE excess. We demonstrated that diblock copolymers, poly(ethylene oxide)-block-poly(N,N-dimethylaminoethyl methacrylate) and poly(ethylene oxide)-block-poly(N,N,N-trimethylammonioethyl methacrylate), consisting of a polycation block and a neutral hydrophilic block, reversibly co-assemble with insulin in pH range between 5 and 8. Using small-angle neutron and X-ray scattering (SANS, SAXS), we showed that insulin arrangement within formed particles is controlled by intermolecular electrostatic forces between protein molecules, and can be tuned by varying ionic strength. For the first time, we observed by fluorescence that formed protein/PE complexes with excess of positive charges exhibited potential for encapsulating and controlled release of negatively charged bivalent drugs, protoporphyrin-IX and zinc(II) protoporphyrin-IX, enabling the development of nanocarriers for combination therapies with adjustable charge, stability, internal structure, and size.