Mitochondria-derived peptide is an effective target for treating streptozotocin induced painful diabetic neuropathy through induction of activated protein kinase/peroxisome proliferator-activated receptor gamma coactivator 1alpha -mediated mitochondrial biogenesis.

Painful Diabetic Neuropathy (PDN) is a common diabetes complication that frequently causes severe hyperalgesia and allodynia and presents treatment challenges. Mitochondrial-derived peptide (MOTS-c), a novel mitochondrial-derived peptide, has been shown to regulate glucose metabolism, insulin sensitivity, and inflammatory responses. This study aimed to evaluate the effects of MOTS-c in streptozocin (STZ)-induced PDN model and investigate the putative underlying mechanisms. We found that endogenous MOTS-c levels in plasma and spinal dorsal horn were significantly lower in STZ-treated mice than in control animals. Accordingly, MOTS-c treatment significantly improves STZ-induced weight loss, elevation of blood glucose, mechanical allodynia, and thermal hyperalgesia; however, these effects were blocked by dorsomorphin, an adenosine monophosphate-activated protein kinase (AMPK) inhibitor. In addition, MOTS-c treatment significantly enhanced AMPKα1/2 phosphorylation and PGC-1α expression in the lumbar spinal cord of PDN mice. Mechanistic studies indicated that MOTS-c significantly restored mitochondrial biogenesis, inhibited microglia activation, and decreased the production of pro-inflammatory factors, which contributed to the alleviation of pain. Moreover, MOTS-c decreased STZ-induced pain hypersensitivity in PDN mice by activating AMPK/PGC-1α signaling pathway. This provides the pharmacological and biological evidence for developing mitochondrial peptide-based therapeutic agents for PDN.

Study on Dynamic Liquid-Carrying Process of Foaming Agent and Establishment of Mathematical Model.

The efficiency of foam drainage gas recovery is predominantly dictated by the performance of the foaming agent. To better understand their behavior, a novel testing apparatus was developed to simulate the foam drainage gas recovery process within the wellbore. Through the dynamic liquid-carrying performance tests of four foaming agents under uniform conditions, it was discerned that there existed significant disparities in the liquid-carrying performance and action duration. Further interface performance analysis disclosed that the liquid-carrying capacity and the duration were correlated with their adsorption capacity and interface activity at the gas-liquid interface. Notably, foaming agents with lower adsorption capacity and higher interfacial activity demonstrated superior liquid-carrying performance and longer action duration. By analyzing the consumption of foaming agents during the liquid-carrying process, five dynamic liquid-carrying equations were derived based on first-order reaction kinetics, the Malthusian population model, and the logistic function. The outcomes demonstrated that all these five equations could precisely delineate the dynamic liquid-carrying process of the foaming agent. During the research, we found that the consumption of the foaming agent in the foam drainage gas recovery process is related to its adsorption behavior at the gas-liquid interface, and revealed that the dynamic liquid-carrying process of foaming agent is the increasing process of liquid-carrying capacity under the continuous consumption of limited foaming agent resources. This laid a foundation for the further exploration of the functional mechanism of the foaming agent in the foam drainage gas recovery process.

MOTS-c is an effective target for treating cancer-induced bone pain through the induction of AMPK-mediated mitochondrial biogenesis.

Bone cancer pain (BCP), due to cancer bone metastasis and bone destruction, is a common symptom of tumors, including breast, prostate, and lung tumors. Patients often experience severe pain without effective treatment. Here, using a mouse model of bone cancer, we report that MOTS-c, a novel mitochondrial-derived peptide, confers remarkable protection against cancer pain and bone destruction. Briefly, we find that the plasma level of endogenous MOTS-c is significantly lower in the BCP group than in the sham group. Accordingly, intraperitoneal administration of MOTS-c robustly attenuates bone cancer-induced pain. These effects are blocked by compound C, an AMPK inhibitor. Furthermore, MOTS-c treatment significantly enhances AMPKα 1/2 phosphorylation. Interestingly, mechanical studies indicate that at the spinal cord level, MOTS-c relieves pain by restoring mitochondrial biogenesis, suppressing microglial activation, and decreasing the production of inflammatory factors, which directly contribute to neuronal modulation. However, in the periphery, MOTS-c protects against local bone destruction by modulating osteoclast and immune cell function in the tumor microenvironment, providing long-term relief from cancer pain. Additionally, we find that chronic administration of MOTS-c has little effect on liver, renal, lipid or cardiac function in mice. In conclusion, MOTS-c improves BCP through peripheral and central synergistic effects on nociceptors, immune cells, and osteoclasts, providing a pharmacological and biological rationale for the development of mitochondrial peptide-based therapeutic agents for cancer-induced pain.

Engineered Design of a Mesoporous Silica Nanoparticle-Based Nanocarrier for Efficient mRNA Delivery in Vivo.

We have developed tailor-designed mesoporous silica nanoparticles (MSNPs) specifically for delivering mRNA. Our unique assembly protocol involves premixing mRNA with a cationic polymer and then electrostatically binding it to the MSNP surface. Since the key physicochemical parameters of MSNPs could influence the biological outcome, we also investigated the roles of size, porosity, surface topology, and aspect ratio on the mRNA delivery. These efforts allow us to identify the best-performing carrier, which was able to achieve efficient cellular uptake and intracellular escape while delivering a luciferase mRNA in mice. The optimized carrier remained stable and active for at least 7 days after being stored at 4 °C and was able to enable tissue-specific mRNA expression, particularly in the pancreas and mesentery after intraperitoneal injection. The optimized carrier was further manufactured in a larger batch size and found to be equally efficient in delivering mRNA in mice and rats, without any obvious toxicity.

Nanoparticles systemically biodistribute to regenerating skeletal muscle in DMD.

Skeletal muscle disease severity can often progress asymmetrically across muscle groups and heterogeneously within tissues. An example is Duchenne Muscular Dystrophy (DMD) in which lack of dystrophin results in devastating skeletal muscle wasting in some muscles whereas others are spared or undergo hypertrophy. An efficient, non-invasive approach to identify sites of asymmetry and degenerative lesions could enable better patient monitoring and therapeutic targeting of disease. In this study, we utilized a versatile intravenously injectable mesoporous silica nanoparticle (MSNP) based nanocarrier system to explore mechanisms of biodistribution in skeletal muscle of mdx mouse models of DMD including wildtype, dystrophic, and severely dystrophic mice. Moreover, MSNPs could be imaged in live mice and whole muscle tissues enabling investigation of how biodistribution is altered by different types of muscle pathology such as inflammation or fibrosis. We found MSNPs were tenfold more likely to aggregate within select mdx muscles relative to wild type, such as gastrocnemius and quadriceps. This was accompanied by decreased biodistribution in off-target organs. We found the greatest factor affecting preferential delivery was the regenerative state of the dystrophic skeletal muscle with the highest MSNP abundance coinciding with the regions showing the highest level of embryonic myosin staining and intramuscular macrophage uptake. To demonstrate, muscle regeneration regulated MSNP distribution, we experimentally induced regeneration using barium chloride which resulted in a threefold increase of intravenously injected MSNPs to sites of regeneration 7 days after injury. These discoveries provide the first evidence that nanoparticles have selective biodistribution to skeletal muscle in DMD to areas of active regeneration and that nanoparticles could enable diagnostic and selective drug delivery in DMD skeletal muscle.

Activated microglia promote invasion and barrier dysfunction of brain endothelial cells via regulating the CXCL13/CXCR5 axis.

The blood brain barrier (BBB) is a protective border that prevents noxious substances from gaining access to the central nervous system (CNS). CXCL13 is a chemokine from the CXC chemokine family, which has been shown to destroy the barrier function of umbilical vein endothelial cells with its receptor CXCR5. Here, we aimed to investigate the role of CXCL13/CXCR5 signaling axis in BBB. The invasive ability of bEnd.3 cells was determined by the Transwell invasion assay. The barrier integrity of bEnd.3 cells was assessed by detecting trans-endothelial electrical resistance, the permeability to fluorescein isothiocyanate-dextran, and the expression levels of the tight junction protein E-cadherin. Lipopolysaccharide (LPS)-activated microglia promoted invasion and barrier dysfunction, and upregulated CXCR5 and p-p38 expression levels in cocultured bEnd.3 cells. However, the effects of activated microglia were alleviated by knocking down CXCR5 in cocultured bEnd.3 cells. Furthermore, recombinant CXCL13 promoted invasion and barrier dysfunction, and upregulated the expression levels of p-p38 in bEnd.3 cells; however, its effects were abolished by treating bEnd.3 cells with the p38 inhibitor SB203580. Our data tentatively demonstrated that LPS-activated microglial cells may promote invasion and barrier dysfunction in bEnd.3 cells by regulating the CXCL13/CXCR5 axis and p38 signaling.

NLRP3 inflammasome activation determines the fibrogenic potential of PM2.5 air pollution particles in the lung.

Airborne fine particulate matter (PM2.5) is known to cause respiratory inflammation such as chronic obstructive pulmonary disease and lung fibrosis. NLRP3 inflammasome activation has been implicated in these diseases; however, due to the complexity in PM2.5 compositions, it is difficult to differentiate the roles of the components in triggering this pathway. We collected eight real-life PM2.5 samples for a comparative analysis of their effects on NLRP3 inflammasome activation and lung fibrosis. In vitro assays showed that although the PM2.5 particles did not induce significant cytotoxicity at the dose range of 12.5 to 100 µg/mL, they induced potent TNF-α and IL-1ß production in PMA differentiated THP-1 human macrophages and TGF-ß1 production in BEAS-2B human bronchial epithelial cells. At the dose of 100 µg/mL, PM2.5 induced NLRP3 inflammasome activation by inducing lysosomal damage and cathepsin B release, leading to IL-1ß production. This was confirmed by using NLRP3- and ASC-deficient cells as well as a cathepsin B inhibitor, ca-074 ME. Administration of PM2.5 via oropharyngeal aspiration at 2 mg/kg induced significant TGF-ß1 production in the bronchoalveolar lavage fluid and collagen deposition in the lung at 21 days post-exposure, suggesting PM2.5 has the potential to induce pulmonary fibrosis. The ranking of in vitro IL-1ß production correlates well with the in vivo total cell count, TGF-ß1 production, and collagen deposition. In summary, we demonstrate that the PM2.5 is capable of inducing NLRP3 inflammasome activation, which triggers a series of cellular responses in the lung to induce fibrosis.

Nanocellulose Length Determines the Differential Cytotoxic Effects and Inflammatory Responses in Macrophages and Hepatocytes.

Nanocellulose including cellulose nanocrystal (CNC) and cellulose nanofiber (CNF) has attracted much attention due to its exceptional mechanical, chemical, and rheological properties. Although considered biocompatible, recent reports have demonstrated nanocellulose can be hazardous, including serving as drug carriers that accumulate in the liver. However, the nanocellulose effects on liver cells, including Kupffer cells (KCs) and hepatocytes are unclear. Here, the toxicity of nanocellulose with different lengths is compared, including the shorter CNCs (CNC-1, CNC-2, and CNC-3) and longer CNF (CNF-1 and CNF-2), to liver cells. While all CNCs triggered significant cytotoxicity in KCs and only CNC-2 induced toxicity to hepatocytes, CNFs failed to induce significant cytotoxicity due to their minimal cellular uptake. The phagocytosis of CNCs by KCs induced mitochondria ROS generation, caspase-3/7 activation, and apoptotic cell death as well as lysosomal damage, cathepsin B release, NLRP3 inflammasome and caspase-1 activation, and IL-1ß production. The cellular uptake of CNC-2 by hepatocytes is through clathrin-mediated endocytosis, and it induced the caspase-3/7-mediated apoptosis. CNC-2 shows the highest levels of uptake and cytotoxicity among CNCs. These results demonstrate the length-dependent mechanisms of toxicity on liver cells in a cell type-dependent fashion, providing information to safely use nanocellulose for biomedical applications.

Development of Facile and Versatile Platinum Drug Delivering Silicasome Nanocarriers for Efficient Pancreatic Cancer Chemo-Immunotherapy.

In this study a mesoporous silica nanoparticle (MSNP) based platform is developed for high-dose loading of a range of activated platinum (Pt) chemo agents that can be attached to the porous interior through the use of electrostatic and coordination chemistry under weak-basic pH conditions. In addition to the design feature for improving drug delivery, the MSNP can also be encapsulated in a coated lipid bilayer (silicasome), to improve the colloidal stability after intravenous (IV) injection. Improved pharmacokinetics and intratumor delivery of encapsulated activated oxaliplatin (1,2-diamminocyclohexane platinum(II) (DACHPt)) over free drug in an orthotopic Kras-derived pancreatic cancer (PDAC) model is demonstrated. Not only does IV injection of the DACHPt silicasome provide more efficacious cytotoxic tumor cell killing, but can also demonstrate that chemotherapy-induced cell death is accompanied by the features of immunogenic cell death (ICD) as well as a dramatic reduction in bone marrow toxicity. The added ICD features are reflected by calreticulin and high-mobility group box 1 expression, along with increased CD8+ /FoxP3+ T-cell ratios and evidence of perforin and granzyme B release at the tumor site. Subsequent performance of a survival experiment, demonstrates that the DACHPt silicasome generates a significant improvement in survival outcome, which can be extended by delayed administration of the anti-PD-1 antibody.

Dissolution of 2D Molybdenum Disulfide Generates Differential Toxicity among Liver Cell Types Compared to Non-Toxic 2D Boron Nitride Effects.

2D boron nitride (BN) and molybdenum disulfide (MoS2 ) materials are increasingly being used for applications due to novel chemical, electronic, and optical properties. Although generally considered biocompatible, recent data have shown that BN and MoS2 could potentially be hazardous under some biological conditions, for example, during, biodistribution of drug carriers or imaging agents to the liver. However, the effects of these 2D materials on liver cells such as Kupffer cells (KCs), liver sinusoidal endothelial cells, and hepatocytes, are unknown. Here, the toxicity of BN and MoS2 , dispersed in Pluronic F87 (designated BN-PF and MoS2 -PF) is compared with aggregated forms of these materials (BN-Agg and MoS2 -Agg) in liver cells. MoS2 induces dose-dependent cytotoxicity in KCs, but not other cell types, while the BN derivatives are non-toxic. The effect of MoS2 could be ascribed to nanosheet dissolution and the release of hexavalent Mo, capable of inducing mitochondrial reactive oxygen species generation and caspases 3/7-mediated apoptosis in KUP5 cells. In addition, the phagocytosis of MoS2 -Agg triggers an independent response pathway involving lysosomal damage, NLRP3 inflammasome activation, caspase-1 activation, IL-1ß, and IL-18 production. These findings demonstrate the importance of Mo release and the state of dispersion of MoS2 in impacting KC viability.

Mechanistic Differences in Cell Death Responses to Metal-Based Engineered Nanomaterials in Kupffer Cells and Hepatocytes.

The mononuclear phagocyte system in the liver is a frequent target for nanoparticles (NPs). A toxicological profiling of metal-based NPs is performed in Kupffer cell (KC) and hepatocyte cell lines. Sixteen NPs are provided by the Nanomaterial Health Implications Research Consortium of the National Institute of Environmental Health Sciences to study the toxicological effects in KUP5 (KC) and Hepa 1-6 cells. Five NPs (Ag, CuO, ZnO, SiO2 , and V2 O5 ) exhibit cytotoxicity in both cell types, while SiO2 and V2 O5 induce IL-1ß production in KC. Ag, CuO, and ZnO induced caspase 3 generated apoptosis in both cell types is accompanied by ion shedding and generation of mitochondrial reactive oxygen species (ROS) in both cell types. However, the cell death response to SiO2 in KC differs by inducing pyroptosis as a result of potassium efflux, caspase 1 activation, NLRP3 inflammasome assembly, IL-1ß release, and cleavage of gasdermin-D. This releases pore-performing peptide fragments responsible for pyroptotic cell swelling. Interestingly, although V2 O5 induces IL-1ß release and delays caspase 1 activation by vanadium ion interference in membrane Na+ /K+ adenosine triphosphate (ATP)ase activity, the major cell death mechanism in KC (and Hepa 1-6) is caspase 3 mediated apoptosis. These findings improve the understanding of the mechanisms of metal-based engineered nanomaterial (ENM) toxicity in liver cells toward comprehensive safety evaluation.

Neural circuits and nicotinic acetylcholine receptors mediate the cholinergic regulation of midbrain dopaminergic neurons and nicotine dependence.

Midbrain dopaminergic (DA) neurons are governed by an endogenous cholinergic system, originated in the mesopontine nuclei. Nicotine hijacks nicotinic acetylcholine receptors (nAChRs) and interferes with physiological function of the cholinergic system. In this review, we describe the anatomical organization of the cholinergic system and the key nAChR subtypes mediating cholinergic regulation of DA transmission and nicotine reward and dependence, in an effort to identify potential targets for smoking intervention. Cholinergic modulation of midbrain DA systems relies on topographic organization of mesopontine cholinergic projections, and activation of nAChRs in midbrain DA neurons. Previous studies have revealed that α4, α6, and ß2 subunit-containing nAChRs expressed in midbrain DA neurons and their terminals in the striatum regulate firings of midbrain DA neurons and activity-dependent dopamine release in the striatum. These nAChRs undergo modification upon chronic nicotine exposure. Clinical investigation has demonstrated that partial agonists of these receptors elevate the success rate of smoking cessation relative to placebo. However, further investigations are required to refine the drug targets to mitigate unpleasant side-effects.

The Crystallinity and Aspect Ratio of Cellulose Nanomaterials Determine Their Pro-Inflammatory and Immune Adjuvant Effects In Vitro and In Vivo.

Nanocellulose is increasingly considered for applications; however, the fibrillar nature, crystalline phase, and surface reactivity of these high aspect ratio nanomaterials need to be considered for safe biomedical use. Here a comprehensive analysis of the impact of cellulose nanofibrils (CNF) and nanocrystals (CNC) is performed using materials provided by the Nanomaterial Health Implications Research Consortium of the National Institute of Environmental Health Sciences. An intermediary length of nanocrystals is also derived by acid hydrolysis. While all CNFs and CNCs are devoid of cytotoxicity, 210 and 280 nm fluorescein isothiocyanate (FITC)-labeled CNCs show higher cellular uptake than longer and shorter CNCs or CNFs. Moreover, CNCs in the 200-300 nm length scale are more likely to induce lysosomal damage, NLRP3 inflammasome activation, and IL-1ß production than CNFs. The pro-inflammatory effects of CNCs are correlated with higher crystallinity index, surface hydroxyl density, and reactive oxygen species generation. In addition, CNFs and CNCs can induce maturation of bone marrow-derived dendritic cells and CNCs (and to a lesser extent CNFs) are found to exert adjuvant effects in ovalbumin (OVA)-injected mice, particularly for 210 and 280 nm CNCs. All considered, the data demonstrate the importance of length scale, crystallinity, and surface reactivity in shaping the innate immune response to nanocellulose.

[Research in Magnesite Grade Classification Based on Near Infrared Spectroscopy and ELM Algorithm].

Due to the needs of industrial development, the different content and uncertain distribution of magnesite mineral lead to great difficulties in o determining its grade, therefore, we propose a combination of near-infrared spectroscopy and the ELM magnesite grade classification model. The model can achieve rapid classification of magnesite grade. Near infrared spectroscopy, considering that different types of H group in magnesite have different absorption degrees to near-infrared spectroscopy, is used to determine the composition and content of magnesite. It is simple, fast, accurate and efficient without destroying the sample. In this paper, we take magnesite 30 group from Yingkou City, Liaoning Province Dashiqiao for the study, collecting their magnesite NIR data samples at 30×973, using principal component analysis (PCA) for data dimensionality reduction process. The main element contribution rate is greater than 99.99% obtained characteristic variables of 10, established quantitative analysis ELM algorithm mathematical model, take 20 groups of samples as the training samples (including 6 super group, 14 groups non), 10 groups of samples for testing samples (including super grade4 groups, 6 groups non), ELM algorithm model hidden layer nodes selection 20. In order to further improve the classification performance, two kinds improved ELM algorithm models are proposed: conduct optimization selection ELM for the traditional ELM input weights and threshold using the circulation patterns and integrate integration-Featured ELM based on Featured ELM. And compare to which use the artificial method, chemical method and BP neural network model approach. The results showed that magnesite grade classification with the near-infrared spectroscopy and ELM model have a distinct advantage regardless of cost or time, and the accuracy rate can reach over 90%, which provides a new way to classify magnesite grade.

Antitumor effector B cells directly kill tumor cells via the Fas/FasL pathway and are regulated by IL-10.

We have previously reported that adoptive transfer of tumor-draining lymph node (TDLN) B cells confers tumor regression in a spontaneous pulmonary metastasis mouse model of breast cancer. In this study, we identified IL-10-producing cells within these B cells, and found that IL-10 removal, either by using IL-10(-/-) TDLN B cells or by systemic neutralization of IL-10, significantly augmented the therapeutic efficacy of adoptively transferred TDLN B cells. Depletion of IL-10 in B-cell adoptive transfers significantly increased CTLs and B-cell activity of PBMCs and splenic cells in the recipient. Activated TDLN B cells express Fas ligand, which was further enhanced by coculture of these TDLN B cells with 4T1 tumor cells. Effector B cells killed tumor cells directly in vitro in an antigen specific and Fas ligand-dependent manner. Trafficking of TDLN B cells in vivo suggested that they were recruited to the tumor and lung as well as secondary lymphoid organs. These findings further define the biological function of antitumor effector B cells, which may offer alternative cellular therapies to cancer.

[Imatinib mesylate for chronic myeloid leukemia: in patients with initial treatment versus those with Recombinant Human IFN-α2b treatment failure].

OBJECTIVE: To evaluate the efficacy of imatinib mesylate (IM) for patients with newly diagnosed chronic myeloid leukemia (CML) and patients after failure of Recombinant Human interferon-α2b (IFN-α2b) therapy. METHODS: A total of 86 patients with CML in chronic-phase, including 61 newly diagnosed cases and 25 cases of IFN-α2b failure, who received IM at 400 mg daily were retrospectively analyzed. Conventional cytogenetic analysis of R-banding was used to detect chromosome abnormalities and real-time PCR was used to detect BCR-ABL fusion gene. RESULTS: 81.9% of newly diagnosed patients and 36.0% of IFN-α2b failure patients achieved partial cytogenetic response (PCyR) by 6 months. In addition, 86.9% of newly diagnosed patients and 68.0% of IFN-α2b failure patients achieved complete cytogenetic response (CCyR) in 24 months. There was significant difference between two groups (P<0.001). The median time achieved CCyR in newly diagnosed group and IFN-α2b failure group were 6 months and 15 months, respectively. Compared with newly diagnosed group, IFN-α2b failure group showed lower rate of complete molecular remission (CMR) (70.4% vs 40.0%, P=0.033). There are 14 patients (22.9%) in newly diagnosed patients with cytogenetic resistance, among whom 4 with primary cytogenetic resistance; while there were 14 patients (56.0%) in IFN-α2b failure group with cytogenetic resistance, all of whom with primary resistance. CONCLUSION: Compared with newly diagnosed patients, CML patients after failure of IFN-α2b therapy have a high rate of primary cytogenetic resistance and low response rate to IM.

ALKBH5 modulates m6A modification to enhance acute myeloid leukemia resistance to adriamycin.

Acute myeloid leukemia (AML) is a fatal malignancy with rising incidence and low cure rates. This study aims to investigate the effect of ALKBH5-mediated m6A modification on adriamycin (ADR) resistance in AML. First, the levels of ALKBH5, TUG1, YTHDF2, EHMT2, and SH3BGRL were measured. IC50 values, cell proliferation, and apoptosis were determined. m6A levels were analyzed, and the binding interactions between TUG1 and YTHDF2, as well as TUG1 and EHMT2, were assessed. The stability of TUG1 and the enrichment of EHMT2 and H3K9me2 on the SH3BGRL promoter were confirmed. In vivo experiments were conducted to further validate the results. The findings revealed that ALKBH5 was overexpressed in both AML and ADR-resistant cells, and silencing ALKBH5 reduced the ADR resistance of AML cells. ALKBH5 removed m6A modifications from TUG1, disrupting the interaction between YTHDF2 and TUG1, thereby stabilizing TUG1 expression. TUG1 bound to EHMT2, promoting H3K9me2 modification on the SH3BGRL promoter and suppressing SH3BGRL expression. Overexpression of TUG1 or knockdown of SH3BGRL reversed the suppressive effect of ALKBH5 knockdown on ADR resistance. In vivo, ALKBH5 knockdown inhibited ADR resistance in AML cells. In conclusion, ALKBH5 removed m6A modification to stabilize TUG1 expression in a YTHDF2-dependent manner, enhancing H3K9me2 levels on the SH3BGRL promoter and suppressing SH3BGRL expression, thus promoting ADR resistance in AML cells.

Central and peripheral mechanism of MOTS-c attenuates pain hypersensitivity in a mice model of inflammatory pain.

BACKGROUND: Inflammatory pain is caused by damaged tissue or noxious stimuli, accompanied by the release of inflammatory mediators that often leads to severe hyperalgesia and allodynia with limited therapy options. Recently, a novel mitochondrial-derived peptide (named MOTS-c) was reported to regulate obesity, metabolic homeostasis and inflammatory response. The aim of this study was to investigate the effects of MOTS-c and its related regulatory mechanisms involved in inflammatory pain. METHODS: Male Kunming mice (8-10 weeks-old) were intraplantar injected with formalin, capsaicin, λ-Carrageenan and complete Freund adjuvant (CFA) to establish acute and chronic inflammatory pain. The effects of MOTS-c on the above inflammatory pain mice and its underlying mechanisms were examined by behavioral tests, quantitative polymerase chain reaction (qPCR), western blotting, enzyme linked immunosorbent assay (ELISA), immunohistochemistry (IHC) and immunofluorescence (IF). RESULTS: Behavioral experiments investigated the potential beneficial effects of MOTS-c on multiple acute and chronic inflammatory pain in mice. The results showed that MOTS-c treatment produced potent anti-allodynic effects in formalin-induced acute inflammatory pain, capsaicin-induced nocifensive behaviors and λ-Carrageenan/CFA-induced chronic inflammatory pain model. Further mechanistic studies revealed that central MOTS-c treatment significantly ameliorated CFA-evoked the release of inflammatory factors and activation of glial cells and neurons in the spinal dorsal horn. Moreover, peripheral MOTS-c treatment reduced CFA-evoked inflammatory responses in the surface structure of hindpaw skin, accompanied by inhibiting excitation of peripheral calcitonin gene-related peptide (CGRP) and P2X3 nociceptive neurons. CONCLUSIONS: The present study indicates that MOTS-c may serve as a promising therapeutic target for inflammatory pain.

Direct 3D printing of freeform anisotropic bioactive structure based on shear-oriented ink system.

Various anisotropic tissue structures exist in organisms, including muscle tissue, skin tissue, and nerve tissue. Replicating anisotropic tissue structuresin vitrohas posed a significant challenge. Three-dimensional (3D) printing technology is often used to fabricate biomimetic structures due to its advantages in manufacturing principle. However, direct 3D printing of freeform anisotropic bioactive structures has not been reported. To tackle this challenge, we developed a ternary F/G/P ink system that integrates the printability of Pluronic F127 (F), the robust bioactivity and photocrosslinking properties of gelatin methacryloyl (G), and the shear-induced alignment functionality of high-molecular-weight polyethylene glycol (P). And through this strategic ternary system combination, freeform anisotropic tissue structures can be 3D printed directly. Moreover, these anisotropic structures exhibit excellent bioactivity, and promote orientational growth of different cells. This advancement holds promise for the repair and replacement of anisotropic tissues within the human body.

Omnidirectional anisotropic embedded 3D bioprinting.

Anisotropic microstructures resulting from a well-ordered arrangement of filamentous extracellular matrix (ECM) components or cells can be found throughout the human body, including skeletal muscle, corneal stroma, and meniscus, which play a crucial role in carrying out specialized physiological functions. At present, due to the isotropic characteristics of conventional hydrogels, the construction of freeform cell-laden anisotropic structures with high-bioactive hydrogels is still a great challenge. Here, we proposed a method for direct embedded 3D cell-printing of freeform anisotropic structure with shear-oriented bioink (GelMA/PEO). This study focuses on the establishment of an anisotropic embedded 3D bioprinting system, which effectively utilizes the shear stress generated during the extrusion process to create cells encapsulating tissues with distinct anisotropy. In conjunction with the water-solubility of PEO and the in-situ encapsulation effect provided by the carrageenan support bath, high-precise cell-laden bioprinting of intricate anisotropic and porous bionic artificial tissues can be effectively implemented in one-step. Additionally, anisotropic permeable blood vessel has been taken as a representation to validate the effectiveness of the shear-oriented bioink system in fabricating intricate structures with distinct directional characteristics. Lastly, the successful preparation of muscle patches with anisotropic properties and their guiding role for cell cytoskeleton extension have provided a significant research foundation for the application of the anisotropic embedded 3D bioprinting system in the ex-vivo production and in-vivo application of anisotropic artificial tissues.