Heat-Assisted Magnetization Switching in Flexible Spin-Orbit Torque Devices.

Heat-assisted magnetic anisotropy engineering has been successfully used in selective magnetic writing and microwave amplification due to a large interfacial thermal resistance between the MgO barrier and the adjacent ferromagnetic layers. However, in spin-orbit torque devices, the writing current does not flow through the tunnel barrier, resulting in a negligible heating effect due to efficient heat dissipation. Here, we report a dramatically reduced switching current density of ∼2.59 MA/cm2 in flexible spin-orbit torque heterostructures, indicating a 98% decrease in writing energy consumption compared with that on a silicon substrate. The reduced driving current density is enabled by the dramatically decreased magnetic anisotropy due to Joule dissipation and the lower thermal conductivity of the flexible substrate. The large magnetic anisotropy could be fully recovered after the impulse, indicating retained high stability. These results pave the way for flexible spintronics with the otherwise incompatible advantages of low power consumption and high stability.

Surface Oxygen Deficiency Enabled Spontaneous Antiprotein Fouling in WO3 Nanosheets for Biosensing in Biological Fluids.

Biofouling deteriorates the performance of sensors operated in biofluids. Protein adsorption is believed to be the first step of biofouling, which also reduces biocompatibility by further inducing cell adhesion, platelet activation, and even inflammation. Current studies of antifouling coatings are focused on polymers and hydrogels, which have succeeded in remaining resistant to protein adsorption, but their application on sensor electrodes is limited due to low conductivity and biocompatibility. Here, we report a spontaneous antibiofouling strategy for sensor electrodes by controlling oxygen vacancies in WO3 nanosheets. Irreversible adsorption of proteins was reduced by 76% in unprocessed human plasma when electrodes were coated with WO3 rich in surface oxygen vacancy. These electrodes maintained 91% of the initial current density after 1 month of incubation in human plasma.

Highly Stretchable, Knittable, Wearable Fiberform Hydrovoltaic Generators Driven by Water Transpiration for Portable Self-Power Supply and Self-Powered Strain Sensor.

The development of excellently stretchable, highly mobile, and sustainable power supplies is of great importance for self-power wearable electronics. Transpiration-driven hydrovoltaic power generator (HPG) has been demonstrated to be a promising energy harvesting strategy with the advantages of negative heat and zero-carbon emissions. Herein, this work demonstrates a fiber-based stretchable HPG with the advantages of high output, portability, knittability, and sustainable power generation. Based on the functionalized micro-nano water diffusion channels constructed by the discarded mask straps (MSs) and oxidation-treated carbon nanomaterials, the applied water can continuously produce electricity during the spontaneous flow and diffusion. Experimentally, when a tiny 0.1 mL of water encounters one end of the proposed HPG, the centimeter-length device can yield a peak voltage of 0.43 V, peak current of 29.5 µA, and energy density of 5.833 mW h cm-3. By efficiently integrating multiple power generation units, sufficient output power can be provided to drive commercial electronic devices even in the stretched state. Furthermore, due to the reversibility of the electrical output during dynamic stretching-releasing, it can passively convert physiological activities and motion behaviors into quantifiable and processable current signals, opening up HPG's application in the field of self-powered wearable sensing.

Split ring hole metamaterial-enhanced pyroelectric detector for efficient multi-narrowband terahertz detection.

Derived from infrared pyroelectric detection, typical terahertz (THz) pyroelectric detectors have low sensitivity at low-frequency THz bands. Based on the high-efficiency absorption of the metamaterial perfect absorber (MPA), a novel split ring hole metamaterial-enhanced pyroelectric detector is proposed to achieve efficient multi-narrowband THz detection. Using high frequency simulation software (HFSS), the dimensional parameters including ring radius, ring width, connection beam width, array period, and thickness, are optimized to enhance efficient multi-narrowband absorption. The as-optimized metamaterial-enhanced detectors are fabricated via micro-nano manufacturing technology. The voltage responsiveness and noise equivalent power of the metamaterial-enhanced detector are tested by THz focused optical path and compared with those of the typical pyroelectric detector and the simulated MPA absorptivity. The results indicate that the metamaterial-enhanced detector has a multi-narrowband detection capability at 0.245 THz, 0.295 THz, and 0.38 THz, which is close to the simulated MPA absorptivity. Compared to the typical pyroelectric detector, the split ring hole metamaterial-enhanced detector can simultaneously achieve thermal absorption, thermal conduction, and pyroelectricity in the same MPA structure, providing faster response speed above 100 Hz chopper frequency and two times higher detection sensitivity at multi-narrowband THz frequencies. This research can be used for THz sensing, absorption filtering, biological macromolecule detection, and other applications.

Nano-cutting mechanism of ion implantation-modified SiC: reducing subsurface damage expansion and abrasive wear.

This study utilized ion implantation to modify the material properties of silicon carbide (SiC) to mitigate subsurface damage during SiC machining. The paper analyzed the mechanism of hydrogen ion implantation on the machining performance of SiC at the atomic scale. A molecular dynamics model of nanoscale cutting of an ion-implanted SiC workpiece using a non-rigid regular tetrakaidecahedral diamond abrasive grain was established. The study investigated the effects of ion implantation on crystal structure phase transformation, dislocation nucleation, and defect structure evolution. Results showed ion implantation modification decreased the extension depth of amorphous structures in the subsurface layer, thereby enhancing the surface and subsurface integrity of the SiC workpiece. Additionally, dislocation extension length and volume within the lattice structure were lower in the ion-implanted workpiece compared to non-implanted ones. Phase transformation, compressive pressure, and cutting stress of the lattice in the shear region per unit volume were lower in the ion-implanted workpiece than the non-implanted one. Taking the diamond abrasive grain as the research subject, the mechanism of grain wear under ion implantation was explored. Grain expansion, compression, and atomic volumetric strain wear rate were higher in the non-implanted workpiece versus implanted ones. Under shear extrusion of the SiC workpiece, dangling bonds of atoms in the diamond grain were unstable, resulting in graphitization of the diamond structure at elevated temperatures. This study established a solid theoretical and practical foundation for realizing non-destructive machining at the atomic scale, encompassing both theoretical principles and practical applications.

Evolution of Thermoelectric Generators: From Application to Hybridization.

Considerable thermal energy is emitted into the environment from human activities and equipment operation in the course of daily production. Accordingly, the use of thermoelectric generators (TEGs) can attract wide interest, and it shows high potential in reducing energy waste and increasing energy recovery rates. Notably, TEGs have aroused rising attention and been significantly boosted over the past few years, as the energy crisis has worsened. The reason for their progress is that thermoelectric generators can be easily attached to the surface of a heat source, converting heat energy directly into electricity in a stable and continuous manner. In this review, applications in wearable devices, and everyday life are reviewed according to the type of structure of TEGs. Meanwhile, the latest progress of TEGs' hybridization with triboelectric nanogenerator (TENG), piezoelectric nanogenerator (PENG), and photovoltaic effect is introduced. Moreover, prospects and suggestions for subsequent research work are proposed. This review suggests that hybridization of energy harvesting, and flexible high-temperature thermoelectric generators are the future trends.

Deterministic Magnetization Reversal in Synthetic Antiferromagnets using Natural Light.

Traditional current-driven spintronics is limited by localized heating issues and large energy consumption, restricting their data storage density and operation speed. Meanwhile, voltage-driven spintronics with much lower energy dissipation also suffers from charge-induced interfacial corrosion. Thereby finding a novel way of tuning ferromagnetism is crucial for spintronics with energy-saving and good reliability. Here, a visible light tuning of interfacial exchange interaction via photoelectron doping into synthetic antiferromagnetic heterostructure of CoFeB/Cu/CoFeB/PN Si substrate is demonstrated. Then, a complete, reversible magnetism switching between antiferromagnetic (AFM) and ferromagnetic (FM) states with visible light on and off is realized. Moreover, a visible light control of 180° deterministic magnetization switching with a tiny magnetic bias field is achieved. The magnetic optical Kerr effect results further reveal the magnetic domain switching pathway between AFM and FM domains. The first-principle calculations conclude that the photoelectrons fill in the unoccupied band and raise the Fermi energy, which increases the exchange interaction. Lastly, a prototype device with visible light control of two states switching with a 0.35% giant magnetoresistance ratio change (maximal 0.4%), paving the way toward fast, compact, and energy-efficient solar-driven memories is fabricated.

Deterministic Magnetic Switching in Perpendicular Magnetic Trilayers Through Sunlight-Induced Photoelectron Injection.

Finding an energy-efficient way of switching magnetization is crucial in spintronic devices, such as memories. Usually, spins are manipulated by spin-polarized currents or voltages in various ferromagnetic heterostructures; however, their energy consumption is relatively large. Here, a sunlight control of perpendicular magnetic anisotropy (PMA) in Pt (0.8 nm)/Co (0.65 nm)/Pt (2.5 nm)/PN Si heterojunction in an energy-efficient manner is proposed. The coercive field (HC ) is altered from 261 to 95 Oe (64% variation) under sunlight illumination, enabling a nearly 180° deterministic magnetization switching reversibly with a 140 Oe magnetic bias assistant. The element-resolved X-ray circular dichroism measurement reveals different L3 and L2 edge signals of the Co layer with or without sunlight, suggesting a photoelectron-induced redistribution of the orbital and spin moment in Co magnetization. The first-principle calculations also reveal that the photo-induced electrons shift the Fermi level of electrons and enhance the in-plane Rashba field around the Co/Pt interfaces, leading to a weakened PMA and corresponding HC decreasing and magnetization switching accordingly. The sunlight control of PMA may provide an alternative way for magnetic recording, which is energy efficient and would reduce the Joule heat from the high switching current.

In-situ determination of spin polarization in a single-beam fiber-coupled spin-exchange-relaxation-free atomic magnetometer with differential detection.

The electronic spin polarization of alkali-metal-vapor atoms is a pivotal parameter for atomic magnetometers. Herein, a novel method is presented for determining the spin polarization with a miniaturized single-beam spin-exchange-relaxation-free (SERF) magnetometer on the basis of zero-field cross-over resonance. Two separate laser beams are utilized to heat the cell and interrogate the vapor atoms, respectively. Spin polarization can be extracted by measuring the resonance response signal of the magnetometer to the transverse magnetic field under different irradiances. Results of these experiments are consistent well with the theoretical predictions with the maximum deviation less than 4%. The proposed method has the integrated advantages of possessing a simple configuration and in-situ measurement. Furthermore, combined with a homemade optical differential detection system with a factor of approximately three of the power noise suppression, the developed single-beam SERF atomic magnetometer with a measuring sensitivity of 32 fT/Hz1/2 has been achieved. This demonstrated approach can help guide the development of chip-scale atomic magnetometers for bio-magnetic field imaging applications.

Efficient fluorescence coupling microlens integrated fiber magnetometer probe based on nitrogen vacancy centers.

The nitrogen vacancy (NV) centers in diamonds have gathered increasing interest as an emerging quantum sensing platform with high sensitivity and spatial resolution. Integration of micro-sized diamond and fiber is an essential method to build an NV center endoscope probe and enable NV center sensors for practical application. However, the low fluorescence collection efficiency of fibers due to their small numerical aperture (NA) has limited the sensitivity of the sensors. In this paper, a cone-shape microlens was fabricated using the photopolymerization process at the end of a multimode fiber to boost the laser excitation and fluorescence collection efficiency of NV centers. Experiments demonstrated that over 21 times fluorescence intensity enhancement and 12 times sensitivity improvement were achieved. This fiber-microlens magnetometer probe exhibited a 2.1-nT/Hz1/2 sensitivity over a bandwidth of 100 Hz with ∼80-µm diameter diamond. This research presented a robust and large NA diamond integrated fiber-microlens magnetometer probe, which can also be expanded to magnetic field scan and real-time monitoring.

Study of deterministic surface micro-texture generation in ultra-precision grinding considering wheel oscillation.

Ultra-precision grinding is crucial for manufacturing high-end optics and molds, while the unbalanced wheel vibration is inevitable and becomes even more critical in surface generation, which resulted in undesired waviness and micro-texture on the ground surface. In this paper, to understand and control the micro-texture generation, a theoretical model has been developed to predict the deterministic surface micro-texture generation resulted from unbalanced tool vibration in ultra-precision grinding, in which the overlap trajectories of grinding wheel with an arc cutting edge were analyzed and calculated. The simulation work was performed and a double phase mechanism involved in deterministic textural pattern and structure has been revealed. Both theoretical and experimental results proved that phase shift is an important factor to determine micro-texture evolution in the ultra-precision grinding process. On this basis, a novel tool path strategy has been proposed to fabricate deterministic micro-structure by coordinating oscillation motion of the grinding wheel and phase shift control, in which a rhombus-shaped micro-structure array can be generated. A small adjustment for the phase shift was conducted and it was found that the more complex micro-texture with different textural patterns and micro-structure can be machined. The results indicated that the phase control for the tool path planning is an effective method to fabricate flexible and tunable micro-texture surfaces in ultra-precision grinding.

Fabrication of the high-precision micro-structure array using a phase shift modulation of superimposed oscillation in ultra-precision grinding.

Various micro-structure surface texturing methods have been used to produce optical functional surface in the grinding, such as the textured grinding wheel, wheel path control and off-spindle-axis grinding. However, those grinding technologies are inherently challenged to employ in large-scale surface grinding due to the extremely high requirement for wheel cutting profile dressing. In this study, a novel phase shift modulation based on wheel oscillation motion was proposed to generate the micro-structure array in ultra-precision grinding. The phase shift effect involved in the surface micro-structure generation is investigated, in which the role of the second phase shift on superimposed mode and micro-waviness forms is discussed. A theoretical model based on the tool superimposed oscillation is established to study the micro-structure texture generation mechanism by considering the second phase shift. The influence of modulation frequency in the case of phase shift and out of phase shift on the surface texture generation both for the striation pattern and micro-structure is compared to clarify the transition between the continuous grooves and the discrete micro-structure array. The study indicates that the phase shift modulation represents a novel paradigm for fabricating micro-structure array with considerable capability and high efficiency in ultra-precision grinding.

Compact Tri-FFPI sensor for measurement of ultrahigh temperature, vibration acceleration, and strain.

As a high-precision fiber optic sensor, a single optical fiber Fabry Pérot interferometer (FFPI) sensor is often used to measure parameters such as temperature or strain. However, the use of combined FFPIs to measure multiple parameters simultaneously has rarely been reported. In this paper, a compact Tri-FFPI sensor consisting of three series-connected FFPIs is proposed to measure high temperature, high acceleration, and large strain. The total length and diameter of the sensing part are only 2558.9 µm and 250 µm, respectively. One of the FFPIs, FFPI-1, contains a cantilever beam structure to measure vibration acceleration. FFPI-2 is used to measure temperature and the temperature compensation of the strain measurement. FFPI-3 is used to measure strain. To ensure that the sensor has high measurement sensitivity, two demodulation methods are used: the light intensity demodulation method for vibration acceleration and the wavelength demodulation method for temperature and strain. The sensor is capable of withstanding ultrahigh temperatures up to 1000°C.

Single beam Cs-Ne SERF atomic magnetometer with the laser power differential method.

We describe a single beam compact spin exchange relaxation free (SERF) magnetometer whose configuration is simple and compatible with the silicon-glass bonding micro-machining method. Due to the small size of the vapor cell utilized in a miniature atomic magnetometer, the wall relaxation could not be neglected. In this study we show that Ne buffer gas is more efficient than that of the other typically utilized gas species such as nitrogen and helium for wall relaxation reduction theoretically and experimentally. 3 Amagats (1 Amagat=2.69×1019/cm3) Ne gas is filled in the vapor cell and this is the first demonstration of a Cs-Ne SERF magnetometer. In order to reduce the laser amplitude noise and the large background detection offset, which is reported to be the main noise source of a single beam absorption SERF magnetometer, we developed a laser power differential method and a factor of approximately two improvement of the power noise suppression has been demonstrated. In order to reduce the power consumption of the magnetometer, the Cs based atomic magnetometer is studied. We did an optimization of the magnetometer and a sensitivity of 23fT/Hz1/2@100Hz has been achieved. This is the first demonstration of a single beam Cs based SERF magnetometer.

Point-of-care COPD diagnostics: biomarkers, sampling, paper-based analytical devices, and perspectives.

Chronic obstructive pulmonary disease (COPD) has become the third leading cause of global death. Insufficiency in early diagnosis and treatment of COPD, especially COPD exacerbations, leads to a tremendous economic burden and medical costs. A cost-effective and timely prevention requires decentralized point-of-care diagnostics at patients' residences at affordable prices. Advances in point-of-care (POC) diagnostics may offer new solutions to reduce medical expenditures by measuring salivary and blood biomarkers. Among them, paper-based analytical devices have been the most promising candidates due to their advantages of being affordable, biocompatible, disposable, scalable, and easy to modify. In this review, we present salivary and blood biomarkers related to COPD endotypes and exacerbations, summarize current technologies to collect human whole saliva and whole blood samples, evaluate state-of-the-art paper-based analytical devices that detect COPD biomarkers in saliva and blood, and discuss existing challenges with outlooks on future paper-based POC systems for COPD diagnosis and management.

All electrospun fabrics based piezoelectric tactile sensor.

Tactile sensors have been widely used in the areas of health monitoring and intelligent human-machine interface. Flexible tactile sensors based on nanofiber mats made by electrospinning can meet the requirements of comfortability and breathability for wearing the body very well. Here, we developed a flexible and self-powered tactile sensor that was sandwich assembled by electrospun organic electrodes and a piezoelectric layer. The metal-free organic electrodes of thermal plastic polyurethane (PU) nanofibers decorated with multi-walled carbon nanotubes were fabricated by electrospinning followed by ultrasonication treatment. The electrospun polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) mat was utilized as the piezoelectric layer, and it was found that the piezoelectric performance of PVDF-TrFE nanofiber mat added with barium titanate (BaTiO3) nanoparticles was enhanced about 187% than that of the pure PVDF-TrFE nanofiber mat. For practical application, the as-prepared piezoelectric tactile sensor exhibited an approximative linear relationship between the external force and the electrical output. Then the array of fabricated sensors was attached to the fingertips of a glove to grab a cup of water for tactile sensing, and the mass of water can be directly estimated according to the outputs of the sensor array. Attributed to the integrated merits of good flexibility, enhanced piezoelectric performance, light weight, and efficient gas permeability, the developed tactile sensor could be widely used as wearable devices for robot execution end or prosthesis for tactile feedback.

Joint-peaks demodulation method based on multireflection peaks of a few-mode fiber Bragg grating for reducing sensing error.

A few-mode fiber Bragg grating (FM-FBG) inscribed in a few-mode fiber (FMF) can maintain multiple reflection peaks due to the stable multiple modes in FMF. This paper studies the sensing characteristics of multiple reflection peaks for a four-mode FBG (4M-FBG) and innovatively proposes a joint-peak demodulation method based on one FM-FBG to reduce measurement error in temperature or strain sensing. This joint-peak demodulation method, theoretically explained and experimentally verified, provides the possibility of generating miniature sensors with high measurement accuracy and stable measurement performance. The potential of 4M-FBG for simultaneous measurement of strain and temperature is studied in this paper. By measuring the changes of wavelength and intensity of the reflection peaks, temperature and strain can be measured effectively.

Curvature effect on surface topography and uniform scallop height control in normal grinding of optical curved surface considering wheel vibration.

High-precision optical components with complex shapes or microstructures have been extensively used in numerous fields such as biomedicine, energy and aerospace. In order to accurately achieve the specific functions of the components, the form accuracy and uniform surface quality need to reach an ever-high level. To achieve this, ultra-precision normal grinding is used for machining various types of complex optical surfaces. However, the intricate variation of the workpiece curvature and grinding wheel vibration gives rise to great challenges to obtain higher precision and uniform surface conditions. In this study, the influence of curvature on surface topography generation has been investigated and a novel model of scallop height has been developed for surface topography generation in the normal grinding of the curved surface. In addition, the relative influence of the curvature is analyzed experimentally, in which the micro-waviness generation as a consequence of the unbalanced vibration of the grinding wheel is modeled and validated by experiments. Finally, the micro sinusoidal array with the setting value for scallop height is achieved by controlling the feed speed, which is determined by the local curvature of surface profile. The results indicated that the curvature variation posed a significant effect on surface uniformity and the model is valid to achieve surface scallop height control in the normal grinding effectively.

Adaptive high-precision demodulation method based on vector matching and cluster-competitive particle swarm optimization for multiplexed FPIs.

Multiplexed fiber optic Fabry-Perot interferometer (FPI) sensors are well known for their precision, simple construction, simpler wiring, and high sensing qualities. However, the limitations on existing demodulation methods degrade the measurement accuracy of multiplexed FPI sensors and necessitate large cavity length differences. In this paper, we propose an adaptive high-precision demodulation method based on vector matching and cluster-competitive particle swarm optimization (CCPSO), which transforms cavity length demodulation into searching for the global extreme. The proposed CCPSO, which uses agglomeration within clusters and competition between clusters simultaneously, enables the improvement of the global extreme search capabilities. The theoretical analysis and experimental results show that the proposed demodulation method decreases the lower limit of the needed cavity length differences to 22 µm, which is reduced by 76.9% compared with the fast Fourier transform-based method. An accuracy of 1.05 nm is achieved with a cavity length difference of 27.5 µm and a signal-to-noise ratio of 36.0 dB for the noise.

Regulation of the Volume Flow Rate of Aqueous Methyl Blue Solution and the Wettability of CuO/ZnO Nanorods to Improve the Photodegradation Performance of Related Microfluidic Reactors.

Six CuO/ZnO nanorod (CuO/ZnONR)-based microfluidic reactors were constructed for different UV irradiation durations, with which an aqueous methylene blue (MB) solution was photodegraded at varied volume flow rate Q. Via numerical and experimental routes, the effects of the Q on the kinetic adsorption rate constant Ka and the initial rate constant KA of the CuO/ZnONR-based microfluidic reactors were discussed. Moreover, a reverse contacting angle (CA) trend of CuO/ZnONRs to the reaction constant K curve of corresponding CuO/ZnONR-based microfluidic reactor suggested that the CA of CuO/ZnONRs was another key influencing factor that affected greatly the photodegradation performance of the microfluidic reactors. The Q of the aqueous MB solution and the UV irradiation duration for the photodeposition of CuO/ZnONRs were optimized to be 125 µL/min and 1.0 h, the K of the CuO/ZnONR-based microfluidic reactors reached 4.84 min-1, and the related ΔKA/K was less than 6%. Similarly, these methods and results can be employed not only to enhance the mass transport and adsorption of specific species within other nanostructured matrix material-coated microchannels but also to enlarge the actual contacting surface areas between these microchannels and the related solution, which further improve the performance of other nanostructured catalyst-based microfluidic reactors, rGO microfluidic voltage generation, and a GOx/AuNW enzymatic glucose microfluidic sensor.