RESUMEN
Influenza (flu) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) exhibit similar clinical symptoms, complicating the diagnosis and clinical management of these critical respiratory infections. Thus, there is an urgent need for rapid on-site detection technologies that can simultaneously detect SARS-CoV-2 and influenza A viruses. Here, we have developed the first platform that combines in situ sampling with immune swabs and multichannel surface-enhanced Raman spectroscopy (SERS) for simultaneous screening of these two respiratory viruses in a single assay. A seed-mediated growth method was used to assemble a number of silver spheres on the surface of Fe3O4@SiO2 spheres, which not only creates extensive Raman hotspots but also provides numerous sites for Raman signaling molecules, enhancing the sensing sensitivity. Integrating two specific Raman signaling molecules into the nanospheres allows for the parallel detection of both viruses, improving the efficiency of SERS signal read-out. Rapid quantitative screening of both SARS-CoV-2 and H1N1 is achievable within 15 min, with detection limits of 7.76, and 8.13 pg·mL-1 for their respective target proteins. The platform demonstrated excellent performance in testing and analyzing 98 clinical samples (SARS-CoV-2:50; influenza A:48), achieving sensitivities of 88.00, and 95.83% for SARS-CoV-2 and influenza A, respectively. Pearson's correlation analysis revealed a significant correlation with the clinical CT values (P < 0.0001), underscoring the great potential of this platform for the early, rapid, and simultaneous diagnostic discrimination of multiple pathogens.
Asunto(s)
COVID-19 , Virus de la Influenza A , SARS-CoV-2 , Plata , Espectrometría Raman , Espectrometría Raman/métodos , SARS-CoV-2/aislamiento & purificación , Humanos , COVID-19/diagnóstico , COVID-19/virología , Plata/química , Virus de la Influenza A/aislamiento & purificación , Dióxido de Silicio/química , Gripe Humana/diagnóstico , Gripe Humana/virología , Nanopartículas del Metal/químicaRESUMEN
The conventional lateral flow immunoassay (LFIA) method using colloidal gold nanoparticles (Au NPs) as labeling agents faces two inherent limitations, including restricted sensitivity and poor quantitative capability, which impede early viral infection detection. Herein, we designed and synthesized CsPbBr3 perovskite quantum dot-based composite nanoparticles, CsPbBr3@SiO2@Fe3O4 (CSF), which integrated fluorescence detection and magnetic enrichment properties into LFIA technology and achieved rapid, sensitive, and convenient quantitative detection of the SARS-CoV-2 virus N protein. In this study, CsPbBr3 served as a high-quantum-yield fluorescent signaling probe, while SiO2 significantly enhanced the stability and biomodifiability of CsPbBr3. Importantly, the SiO2 shell shows relatively low absorption or scattering toward fluorescence, maintaining a quantum yield of up to 74.4% in CsPbBr3@SiO2. Assembly of Fe3O4 nanoparticles mediated by PEI further enhanced the method's sensitivity and reduced matrix interference through magnetic enrichment. Consequently, the method achieved a fluorescent detection range of 1 × 102 to 5 × 106 pg·mL-1 after magnetic enrichment, with a limit of detection (LOD) of 58.8 pg·mL-1, representing a 13.3-fold improvement compared to nonenriched samples (7.58 × 102 pg·mL-1) and a 2-orders-of-magnitude improvement over commercial colloidal gold kits. Furthermore, the method exhibited 80% positive and 100% negative detection rates in clinical samples. This approach holds promise for on-site diagnosis, home-based quantitative tests, and disease procession evaluation.
Asunto(s)
Nanopartículas del Metal , Dióxido de Silicio , Oro , Colorantes Fluorescentes , Inmunoensayo/métodos , Oro ColoideRESUMEN
A platform was designed based on Fe3O4 and CsPbBr3@SiO2 for integrated magnetic enrichment-fluorescence detection of Salmonella typhimurium, which significantly simplifies the detection process and enhances the working efficiency. Fe3O4 served as a magnetic enrichment unit for the capture of S. typhimurium. CsPbBr3@SiO2 was employed as a fluorescence-sensing unit for quantitative signal output, where SiO2 was introduced to strengthen the stability of CsPbBr3, improve its biomodificability, and prevent lead leakage. More importantly, the SiO2 shell shows neglectable absorption or scattering towards fluorescence, making the CsPbBr3@SiO2 exhibit a high quantum yield of 74.4%. After magnetic enrichment, the decreasing rate of the fluorescence emission intensity of the CsPbBr3@SiO2 supernatant at 527 nm under excitation light at UV 365 nm showed a strong linear correlation with S. typhimurium concentration of 1 × 102~1 × 108 CFUâmL-1, and the limit of detection (LOD) reached 12.72 CFUâmL-1. This platform has demonstrated outstanding stability, reproducibility, and resistance to interference, which provides an alternative for convenient and quantitative detection of S. typhimurium.
Asunto(s)
Colorantes Fluorescentes , Límite de Detección , Salmonella typhimurium , Dióxido de Silicio , Salmonella typhimurium/aislamiento & purificación , Dióxido de Silicio/química , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia/métodos , Plomo/química , Sistemas de Atención de Punto , Sulfuros/química , Nanopartículas de Magnetita/química , HumanosRESUMEN
Although the traditional enzyme-linked immunosorbent assay (ELISA) has been widely applied in pathogen detection and clinical diagnostics, it always suffers from complex procedures, a long incubation time, unsatisfying sensitivity, and a single signal readout. Here, we developed a simple, rapid, and ultrasensitive platform for dual-mode pathogen detection based on a multifunctional nanoprobe integrated with a capillary ELISA (CLISA) platform. The novel capture antibodies-modified capillaries can act as a swab to combine in situ trace sampling and detection procedures, eliminating the dissociation between sampling and detection in traditional ELISA assays. With excellent photothermal and peroxidase-like activity, the Fe3O4@MoS2 nanoprobe with a unique p-n heterojunction was chosen as an enzyme substitute and amplified signal tag to label the detection antibody for further sandwich immune sensing. As the analyte concentration increased, the Fe3O4@MoS2 probe could generate dual-mode signals, including remarkable color changes from the chromogenic substrate oxidation as well as photothermal enhancement. Moreover, to avoid false negative results, the excellent magnetic capability of the Fe3O4@MoS2 probe can be used to pre-enrich the trace analytes, amplifying the detection signal and enhancing the immunoassay's sensitivity. Under optimal conditions, specific and rapid detection of SARS-CoV-2 has been realized successfully based on this integrated nanoprobe-enhanced CLISA platform. The detection limits were 5.41 pg·mL-1 for the photothermal assay and 150 pg·mL-1 for the visual colorimetric assay. More importantly, the simple, affordable, and portable platform can also be expanded to rapidly detect other targets such as Staphylococcus aureus and Salmonella typhimurium in practical samples, making it a universal and attractive tool for multiple pathogen analysis and clinical testing in the post COVID-19 era.
Asunto(s)
COVID-19 , Capilares , Humanos , Molibdeno , COVID-19/diagnóstico , SARS-CoV-2 , Ensayo de Inmunoadsorción Enzimática/métodos , AnticuerposRESUMEN
The sensitivity of chemiresistive gas sensors based on metal oxide semiconductors (MOSs) has been inherently affected by ambient humidity because their reactive oxygen species are easily hydroxylated by water molecules, which significantly reduces the accuracy of the gas sensors in food quality assessment. Although conventional metal organic frameworks (MOFs) can serve as coatings for MOSs for humidity-independent gas detection, they have to operate at high working temperatures due to their low or nonconductivity, resulting in high power consumption, significant manufacturing inconvenience, and short-term stability due to the oxidation of MOFs. Here, the conductive and thickness-controlled CuHHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene)-coated Cu2O are developed by combining in situ etching and layer-by-layer liquid-phase growth method, which achieves humidity-independent detection of H2S at room temperature. The response to H2S only decreases by 2.6% below 75% relative humidity (RH), showing a 9.6-fold improvement than the bare Cu2O sensor, which is ascribed to the fact that the CuHHTP layer hinders the adsorption of water molecules. Finally, a portable alarm system is developed to monitor food quality by tracking released H2S. Compared with gas chromatography method, their relative error is within 9.4%, indicating a great potential for food quality assessment.
Asunto(s)
Sulfuro de Hidrógeno , Estructuras Metalorgánicas , Humedad , Calidad de los Alimentos , Óxidos , AguaRESUMEN
Hydrogen peroxide (H2O2), as an important signaling molecule during biological metabolism, is a key member of the reactive oxygen species (ROS) family. The excess of H2O2 will lead to oxidative stress, which is a crucial factor in the production of various ROS-related diseases. In order to study the diverse biological roles of H2O2 in cells and animal tissues, many methods have been developed to detect H2O2. Recently, fluorescence imaging has attracted more and more attention because of its high sensitivity, simple operation, experimental feasibility, and real-time online monitoring. Based on the response group, this study will review the research progress on hydrogen peroxide and summarizes the mechanisms, actualities and prospects of fluorescent probes for H2O2.
RESUMEN
Hypochlorous acid (HOCl), one of the most reactive and deleterious reactive oxygen species (ROS), plays a vital role in many pathological and physiological processes. However, as a result of the highly reactive and diffusible nature of HOCl, its uncontrolled production may lead to an adverse effect on host physiology. Because of its biological importance, many efforts have been focused on developing selective fluorescent probes to image HOCl. However, it is still challenging to design a fluorescent probe with exclusive selectivity towards HOCl. In this study, a novel fluorescent probe for HOCl, Probe 1 was rationally designed based on 1,8-naphthalimide. As the concentration of HOCl increased, the fluorescence intensity of the probe gradually decreased, and the solution color changed from yellow-green to colorless, indicating this is a "naked-eye sensor". Probe 1 has a large Stokes shift (120 nm), which can effectively avoid fluorescence self-absorption. In addition, Probe 1 shows excellent selectivity to HOCl among different ions including common ROS, high sensitivity, fast response (<2 min), high fluorescence quantum yield (Φ = 0.93) and low detection limit (0.237 µM). Finally, the imaging results in HeLa cells showed that the probe could be used for the detection of exogenous and endogenous HOCl, and proved the potential of the probe as a biosensor for the detection of HOCl.
RESUMEN
A simple pH fluorescent probe, N-(6-morpholino-1, 3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl) isonicotinamide (NDI), based on naphthalimide as the fluorophore and isonicotinic acid hydrazide as the reaction site was synthesized and characterized. It is useful for monitoring acidic and alkaline pH. The results of pH titration indicated that NDI exhibits obvious emission enhancement with a pK a of 4.50 and linear response to small pH fluctuations within the acidic range of 3.00-6.50. Interestingly, NDI also displayed strong pH-dependent characteristics with pK a 9.34 and linearly responded to an alkaline range of 8.30-10.50. The sensing response mechanism was confirmed by 1H NMR and ESI-MS spectroscopy. The mechanism of the optical responses of NDI toward pH was also determined by density functional theory (DFT) calculations. In addition, NDI displayed a highly selective and sensitive response to hydrogen ions and hydroxyl ions. The probe was successfully applied to image acidic and alkaline pH value fluctuations in HeLa cells and has lysosomal targeting ability.