Correction to: The effect of magnesium on early osseointegration in osteoporotic bone: a histological and gene expression investigation.

This article was originally published under a CC BY-NC-ND 4.0 license, but has now been made available under a CC BY 4.0 license. The PDF and HTML versions of the paper have been modified accordingly.

The effect of magnesium on early osseointegration in osteoporotic bone: a histological and gene expression investigation.

Magnesium has a key role in osteoporosis and could enhance implant osseointegration in osteoporotic patients. Titanium implants impregnated with Mg ions were installed in the tibia of ovariectomized rats. The release of Mg induced a significant increase of bone formation and the expression of anabolic markers in the peri-implant bone. INTRODUCTION: The success of endosseous implants is highly predictable in patients possessing normal bone status, but it may be impaired in patients with osteoporosis. Thus, the application of strategies that adjuvate implant healing in compromized sites is of great interest. Magnesium has a key role in osteoporosis prevention and it is an interesting candidate for this purpose. In this study, the cellular and molecular effects of magnesium release from implants were investigated at the early healing stages of implant integration. METHODS: Osteoporosis was induced in 24 female rats by means of ovariectomy and low-calcium diet. Titanium mini-screws were coated with mesoporous titania films and were loaded with magnesium (test group) or left as native (control group). The implants were inserted in the tibia and femur of the rats. One, 2 and 7 days after implantation, the implants were retrieved and histologically examined. In addition, expression of genes was evaluated in the peri-implant bone tissue at day 7 by means of quantitative polymerase chain reactions with pathway-oriented arrays. RESULTS: The histological evaluation revealed that new bone formation started already during the first week of healing for both groups. However, around the test implants, new bone was significantly more abundant and spread along a larger surface of the implants. In addition, the release of magnesium induced a significantly higher expression of BMP6. CONCLUSIONS: These results provide evidence that the release of magnesium promoted rapid bone formation and the activation of osteogenic signals in the vicinity of implants placed in osteoporotic bone.

Does crown/implant ratio influence the survival and marginal bone level of short single implants in the mandibular molar? A preliminary investigation consisting of 12 patients.

Crown/implant (C/I) ratio has been proven to not affect the survival of the implants; however, it is also a fact that no evidence exists with regard to the use of single short implants in the mandibular molar. The aim of this study was to determine whether the crown/implant ratios of single implant-supported fixed restorations on implants of 6-8 mm in the mandibular molar have an impact on the implant survival and marginal bone maintenance. Twelve short dental implants (6-8 mm) were installed and restored with single crowns, loaded after 3 months of healing. The restorations were divided according to crown-to-implant ratio into two groups: Group 1: C/I < 2.0 and Group 2: C/I ≧ 2.0. Alveolar bone loss was measured using CBCT scan, taken at the implant placement and after 12 months follow-up from loading. Reduced implant/crown ratio shown no statistic significant differences on implant survival and the alveolar bone level compared with recommended implant/crown ratio. Within the limitation of this study, it can be concluded that reduced C/I ratio could be used as a substitute for recommended C/I ratio in severely mandibular atrophic residual alveolar ridges.

The osseointegration stimulatory effect of macrogeometry-modified implants: a study in the rabbit.

OBJECTIVE: To investigate the bone stimulatory effect of compression forces through histomorphometric analyses of macrothreaded implants with microthreads in between. MATERIAL AND METHODS: Two sets of turned implants with different macrogeometries were prepared. The test group possessed microthreads in between macrothreads, and the control group had macrothreads only. The two-implant groups were placed in both the femur and the tibiae of 10 rabbits. After 4 weeks, the animals were sacrificed and were subjected to histologic processing and histomorphometry. On the prepared stained sections, the total bone area (BA), new BA and bone-to-implant (BIC) were calculated. RESULTS: The mean new BA% (SD) for the test group in the femur presented significantly higher values compared with the control group, being 32.84 (32.5) ± 6.04 and 27.31 (28.19) ± 5.66, respectively (P = 0.04). There were no differences for the new BA in the tibia or the total BA% for both bone types (P = 0.86, P = 0.131, and P = 0.131, respectively). The mean BIC% (SD) in the femur was 13.66 (11.49) ± 6.86 for the test group and 8.48 (7.92) ± 3.31 for the control group and in the tibia, 11.4 (11.88) ± 4.21 for the test group and 13.91 (12.06) ± 6.07 for the control group, respectively. There was no statistical significance among the groups tested. CONCLUSION: The modified implant macrogeometry with microthreads in between promoted effect in the femur. However, no statistical differences could be seen in the tibia, suggesting that the modification may be more effective in bone with poor bone quality, such as in the maxillary bone.

Photocatalytically induced hydrophilicity influences bone remodelling at longer healing periods: a rabbit study.

OBJECTIVES: Previously, we have reported that photocatalytically active hydrophilicity of the anatase titanium dioxide (TiO2) nanoparticles coated onto commercially pure titanium discs presented significantly improved hydrophilicity after ultraviolet irradiation. As hydrophilicity has shown enhancement of osseointegration, the in vivo responses were of great interest. The aim of this study was to evaluate whether or not the photo-activated hydrophilicity generated at the time of implant placement has an effect on the longer healing periods for osseointegration. MATERIALS AND METHODS: Photocatatytically active nanostructured TiO2 powder (Degussa P-25), which consists of approximately 80% anatase and 20% rutile, was spin-coated onto commercially pure titanium discs and was heat-treated thereafter. These P25-coated discs were irradiated with ultraviolet (UV) light for the test (+UV) group, and non-irradiated discs were prepared for the control (-UV) group. Both groups of discs were placed in the rabbits' tibiae. After 12 weeks of healing period, histological analysis and gene expression analysis using real-time RT-PCR were performed. RESULTS: From the histological analyses, there were no specific differences between -UV and +UV groups. However, from the gene expression analysis, ALP, RUNX-2 and IL-10 were significantly upregulated for the +UV group compared with the -UV group. CONCLUSIONS: The biologically enhancing effect to photocatalytically activated surfaces remained even after 12 weeks of healing time in terms of genetic responses.

Characteristics of implant-CAD/CAM abutment connections of two different internal connection systems.

Titanium or zirconium computer-aided design/computer-aided manufacturing abutments are now widely used for aesthetic implant treatments; however, information regarding microscopic structural differences that may influence the biological and mechanical outcomes of different implant systems is limited. Therefore, the characteristics of different connection systems were investigated. Optical microscopic observation and scanning electron microscopy showed different characteristics of two internal systems, namely the Astra Tech and the Replace Select system, and for different materials. The scanning electron microscopic observation showed for the Astra Tech that the implant-abutment interface seemed to be completely sealed for both titanium and zirconium abutments, both horizontally and sagittally; however, the first implant-abutment contact was below the fixture top, creating a microgap, and fixtures connected with titanium abutments showed significantly larger values (23·56µm±5·44 in width, and 168·78µm±30·39 in depth, P<0·001). For Replace Select, scanning electron microscopy in the sagittal direction showed that the sealing of titanium and zirconium abutments differed. The seal between the implant-titanium and implant-zirconium abutments seemed to be complete at the butt-joint interface; however, the displacement of the abutment in relation to the fixture in the lateral direction was evident for both abutments with no statistical differences (P>0·70), creating an inverted microgap. Thus, microscopy evaluation of two commonly used internal systems connected to titanium or zirconium abutments showed that the implant-abutment interface was perfectly sealed under no-loading conditions. However, an inverted microgap was seen in both systems, which may result in bacterial accumulation as well as alteration of stress distribution at the implant-abutment interface.

Impact of surface contamination of implants with saliva during placement in augmented bone defects in sheep calvaria.

Our aim was to try and find out whether contamination with saliva during insertion of dental implants affects osseointegration in bone that has been augmented with different grafts. Six bony defects were created in each of the calvaria of six sheep, and then augmented with three different materials (autogenous bone, bovine bone, and resorbable biphasic ceramic bone substitute) After five weeks of healing, three implants contaminated with saliva (contaminated group) and three not contaminated (uncontaminated group) were placed in the centre of the augmented areas. For histomorphometric analysis, bone implant contact, bone area fraction occupancy, bone and material area, and bony area were measured after a healing period of five weeks. There was a significant difference between the contaminated and uncontaminated groups (p=0.036) for bone implant contact only in the augmented areas, but there were no significant differences in bone area fraction occupancy, bone and material area, and bony area. We conclude that contamination with saliva during placement of dental implants can significantly compromise bone implant contact in augmented areas, but had no significant effect on the formation of bone in areas more distant from the surface of the implant. We suggest that salivary contamination should be avoided during placement of dental implants in augmented areas.

A pediatric occurrence of crescentic glomerulonephritis associated with antineutrophil cytoplasmic antibodies and mesangial IgA deposits.

Antineutrophil cytoplasmic antibody-(ANCA) associated glomerulonephritis usually shows histopathologic features of pauciimmune crescentic glomerulonephritis and occurs late in life. We report a 14-year-old Japanese girl presenting with proteinuria, hematuria and mildly elevated serum creatinine. A renal biopsy specimen demonstrated crescentic glomerulonephritis, immunofluorescence showed mesangial IgA staining. Electron microscopic examination disclosed paramesangial deposits. Serum ANCA against myeloperoxidase (MPO) were detected at high titers. Myeloperoxidase-ANCA-related nephritis accompanied by IgA nephropathy is considered rare in childhood and teen years. Yet, if ANCA assays and detailed electron microscopic examination of renal specimens were performed routinely in patients with rapidly progressive glomerulonephritis, the diagnosis might be more frequent in young patients.

Effect of low speed drilling on osseointegration using simplified drilling procedures.

Our aim was to find out whether simplified drilling protocols would provide biological responses comparable to those of conventional drilling protocols at the low rotational speed of 400rpm. Seventy-eight root form endosseous implants with diameters of 3.75, 4.2, and 5mm were placed into canine tibias and allowed to heal for 3 and 5 weeks. After the dogs had been killed, the samples of implanted bone were retrieved and processed for non-decalcified histological sectioning. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) analyses were made on the histological sections. Implants treated by the simplified protocol resulted in BIC and BAFO values comparable to those obtained with the conventional drilling protocol, and there were no significant differences in the technique or diameter of the drilling. The results suggest that the simplified procedure gives biological outcomes comparable to those of the conventional procedure.

Enhanced bone healing around nanohydroxyapatite-coated polyetheretherketone implants: An experimental study in rabbit bone.

OBJECTIVE: To investigate the bone response to threaded polyetheretherketone (PEEK) implants coated with nanohydroxyapatite. MATERIALS AND METHODS: A total of 39 PEEK implants were coated with nanocrystalline hydroxyapatite and 39 uncoated implants were used as controls. The implant surface was characterized by optical interferometry and scanning electron microscope. The implants were inserted in the tibia and femur of 13 rabbits. After 6 weeks of healing, quantitative and qualitative analyses were performed. RESULTS: The test implants showed significantly higher removal torque test values compared with the control group. Histomorphometric evaluation demonstrated higher bone-to-implant contact for the test implants; however, there were no differences in bone area between the groups. Qualitative histological analyses demonstrated inflammatory cellular reactions in close vicinity of both implant surfaces. A two-cell layer of foreign body giant cells was observed irrespective of sample type. CONCLUSION: Our findings demonstrate that implants with a threaded design render good stability to PEEK in both coated and uncoated implants. Nanohydroxyapatite-coated PEEK implants demonstrated improved bone formation compared with uncoated controls.

The impact of a modified cutting flute implant design on osseointegration.

Information concerning the effects of the implant cutting flute design on initial stability and its influence on osseointegration in vivo is limited. This study evaluated the early effects of implants with a specific cutting flute design placed in the sheep mandible. Forty-eight dental implants with two different macro-geometries (24 with a specific cutting flute design - Blossom group; 24 with a self-tapping design - DT group) were inserted into the mandibular bodies of six sheep; the maximum insertion torque was recorded. Samples were retrieved and processed for histomorphometric analysis after 3 and 6 weeks. The mean insertion torque was lower for Blossom implants (P<0.001). No differences in histomorphometric results were observed between the groups. At 3 weeks, P=0.58 for bone-to-implant contact (BIC) and P=0.52 for bone area fraction occupied (BAFO); at 6 weeks, P=0.55 for BIC and P=0.45 for BAFO. While no histomorphometric differences were observed, ground sections showed different healing patterns between the implants, with better peri-implant bone organization around those with the specific cutting flute design (Blossom group). Implants with the modified cutting flute design had a significantly reduced insertion torque compared to the DT implants with a traditional cutting thread, and resulted in a different healing pattern.

Evaluation of bone response to various anorganic bovine bone xenografts: an experimental calvaria defect study.

This in vivo study investigated the in vivo performance of two newly developed synthetic bone substitutes and compared them to commercially available xenografts (Bio-Oss, Geistlich Pharma AG, Switzerland; OsteoGraf, Dentsply, USA). The materials were tested in a rabbit calvaria model, and the bone forming properties were observed at 4 and 8 weeks after implantation by means of histomorphometry and micro computed tomography (micro-CT). Defects without any graft material were used as negative controls. Micro-CT showed that all materials tested presented new bone formation that filled the defects at both time points, whereas the negative control presented less bone formation, with soft tissue infiltration into the defects. Comparable bone fill percentages were observed for histomorphometric and micro-CT results. Even though no statistically significant difference was found quantitatively between all of the bone graft substitute groups, a higher mean decrease in graft material filling the defects, along with higher remodelling activity, was evident for the experimental materials compared to the commercially available xenografts at 8 weeks. The results indicate that the experimental materials possess high degradability, along with osteoconduction comparable to commercially available xenografts.

The combined effects of undersized drilling and implant macrogeometry on bone healing around dental implants: an experimental study.

This study investigated the effect of undersized preparations with two different implant macrogeometries. There were four experimental groups: group 1, conical implant with an undersized osteotomy of 3.2mm; group 2, conical implant with an undersized osteotomy of 3.5mm; group 3, cylindrical implant with an undersized osteotomy of 3.2mm; group 4, cylindrical implant with an undersized osteotomy of 3.5mm. Implants were placed in one side of the sheep mandible (n=6). After 3 weeks, the same procedure was conducted on the other side; 3 weeks later, euthanasia was performed. All implants were 4mm×10mm. Insertion torque was recorded for all implants during implantation. Retrieved samples were subjected to histological sectioning and histomorphometry. Implants of groups 1 and 2 presented significantly higher insertion torque than those of groups 3 and 4 (P<0.001). No differences in bone-to-implant contact or bone area fraction occupied were observed between the groups at 3 weeks (P>0.24, and P>0.25, respectively), whereas significant differences were observed at 6 weeks between groups 1 and 2, and between groups 3 and 4 (P<0.01). Undersized drilling affected the biological establishment of bone formation around both dental implant macrogeometries.

Bone apposition to laminin-1 coated implants: histologic and 3D evaluation.

Laminin-1 has been reported as one of the factors responsible for the nucleation of calcium phosphates and, in vitro, has been reported to selectively recruit osteoprogenitors. This article focused on its in vivo effects, and evaluated the effect of laminin-1 local application on osseointegration. Polished cylindrical hydroxyapatite implants were coated with laminin-1 (test) and the bone responses in the rabbit tibiae after 2 and 4 weeks were evaluated and compared to the non-coated implants (control). Before the samples were processed for histological sectioning, they were three-dimensionally analysed with micro computed tomography (µCT). Both evaluation methods were analysed with regards to bone area around the implant and bone to implant contact. From the histologic observation, new bone formation around the laminin-1 coated implant at 2 weeks seemed to have increased the amount of supporting bone around the implant, however, at 4 weeks, the two groups presented no notable differences. The two-dimensional and three-dimensional morphometric evaluation revealed that both histologic and three-dimensional analysis showed some tendency in favour of the test group implants, however there was no statistical significance between the test and control group results.

Nano hydroxyapatite-coated implants improve bone nanomechanical properties.

Nanostructure modification of dental implants has long been sought as a means to improve osseointegration through enhanced biomimicry of host structures. Several methods have been proposed and demonstrated for creating nanotopographic features; here we describe a nanoscale hydroxyapatite (HA)-coated implant surface and hypothesize that it will hasten osseointegration and improve its quality relative to that of non-coated implants. Twenty threaded titanium alloy implants, half prepared with a stable HA nanoparticle surface and half grit-blasted, acid-etched, and heat-treated (HT), were inserted into rabbit femurs. Pre-operatively, the implants were morphologically and topographically characterized. After 3 weeks of healing, the samples were retrieved for histomorphometry. The nanomechanical properties of the surrounding bone were evaluated by nanoindentation. While both implants revealed similar bone-to-implant contact, the nanoindentation demonstrated that the tissue quality was significantly enhanced around the HA-coated implants, validating the postulated hypothesis.

Genetic responses to nanostructured calcium-phosphate-coated implants.

Nanostructured calcium phosphate (CaP) has been histologically and biomechanically proven to enhance osseointegration of implants; however, conventional techniques were not sufficiently sensitive to capture its biological effects fully. Here, we compared the conventional removal torque (RTQ) evaluation and gene expression in tissues around nanostructured CaP-coated implants, using real-time RT-PCR, with those of uncoated implants, in a rabbit model. At 2 wks, RTQ values were significantly higher, alkaline phosphatase (ALP) expression was significantly higher, and runt-related transcription factor 2 and tumor necrosis factor-α expressions were significantly lower in the coated than in the uncoated implants. This indicates that inflammatory responses were suppressed and osteoprogenitor activity increased around the CaP-coated surface. At 4 wks, although RTQ values did not significantly differ between the 2 groups, ALP and osteocalcin (OCN) were significantly up-regulated in the coated group, indicating progressive mineralization of the bone around the implant. Moreover, an osteoclast marker, adenosine triphosphatase, which indicates acidification of the resorption lacunae, was significantly higher for the coated implants, suggesting gradual resorption of the CaP coating. This study reveals detailed genetic responses to nanostructured CaP-coated implants and provides evidence that the effect of nanotopography is significant during the osseointegration cascade.

Drilling dimension effects in early stages of osseointegration and implant stability in a canine model

BACKGROUND: This study histologically evaluated two implant designs: a classic thread design versus another specifically designed for healing chamber formation placed with two drilling protocols. MATERIAL AND METHODS: Forty dental implants (4.1 mm diameter) with two different macrogeometries were inserted in the tibia of 10 Beagle dogs, and maximum insertion torque was recorded. Drilling techniques were: until 3.75 mm (regular-group); and until 4.0 mm diameter (overdrilling-group) for both implant designs. At 2 and 4 weeks, samples were retrieved and processed for histomorphometric analysis. For torque and BIC (bone-to-implant contact) and BAFO (bone area fraction occupied), a general-linear model was employed including instrumentation technique and time in vivo as independent. RESULTS: The insertion torque recorded for each implant design and drilling group significantly decreased as a function of increasing drilling diameter for both implant designs (p < 0.001). No significant differences were detected between implant designs for each drilling technique (p > 0.18). A significant increase in BIC was observed from 2 to 4 weeks for both implants placed with the overdrilling technique (p < 0.03) only, but not for those placed in the 3.75 mm drilling sites (p > 0.32). CONCLUSIONS: Despite the differences between implant designs and drilling technique an intramembranous-like healing mode with newly formed woven bone prevailed