Time series canopy phenotyping enables the identification of genetic variants controlling dynamic phenotypes in soybean.

Advances in plant phenotyping technologies are dramatically reducing the marginal costs of collecting multiple phenotypic measurements across several time points. Yet, most current approaches and best statistical practices implemented to link genetic and phenotypic variation in plants have been developed in an era of single-time-point data. Here, we used time-series phenotypic data collected with an unmanned aircraft system for a large panel of soybean (Glycine max (L.) Merr.) varieties to identify previously uncharacterized loci. Specifically, we focused on the dissection of canopy coverage (CC) variation from this rich data set. We also inferred the speed of canopy closure, an additional dimension of CC, from the time-series data, as it may represent an important trait for weed control. Genome-wide association studies (GWASs) identified 35 loci exhibiting dynamic associations with CC across developmental stages. The time-series data enabled the identification of 10 known flowering time and plant height quantitative trait loci (QTLs) detected in previous studies of adult plants and the identification of novel QTLs influencing CC. These novel QTLs were disproportionately likely to act earlier in development, which may explain why they were missed in previous single-time-point studies. Moreover, this time-series data set contributed to the high accuracy of the GWASs, which we evaluated by permutation tests, as evidenced by the repeated identification of loci across multiple time points. Two novel loci showed evidence of adaptive selection during domestication, with different genotypes/haplotypes favored in different geographic regions. In summary, the time-series data, with soybean CC as an example, improved the accuracy and statistical power to dissect the genetic basis of traits and offered a promising opportunity for crop breeding with quantitative growth curves.

Estimating leaf area index using unmanned aerial vehicle data: shallow vs. deep machine learning algorithms.

Measuring leaf area index (LAI) is essential for evaluating crop growth and estimating yield, thereby facilitating high-throughput phenotyping of maize (Zea mays). LAI estimation models use multi-source data from unmanned aerial vehicles (UAVs), but using multimodal data to estimate maize LAI, and the effect of tassels and soil background, remain understudied. Our research aims to (1) determine how multimodal data contribute to LAI and propose a framework for estimating LAI based on remote-sensing data, (2) evaluate the robustness and adaptability of an LAI estimation model that uses multimodal data fusion and deep neural networks (DNNs) in single- and whole growth stages, and (3) explore how soil background and maize tasseling affect LAI estimation. To construct multimodal datasets, our UAV collected red-green-blue, multispectral, and thermal infrared images. We then developed partial least square regression (PLSR), support vector regression, and random forest regression models to estimate LAI. We also developed a deep learning model with three hidden layers. This multimodal data structure accurately estimated maize LAI. The DNN model provided the best estimate (coefficient of determination [R2] = 0.89, relative root mean square error [rRMSE] = 12.92%) for a single growth period, and the PLSR model provided the best estimate (R2 = 0.70, rRMSE = 12.78%) for a whole growth period. Tassels reduced the accuracy of LAI estimation, but the soil background provided additional image feature information, improving accuracy. These results indicate that multimodal data fusion using low-cost UAVs and DNNs can accurately and reliably estimate LAI for crops, which is valuable for high-throughput phenotyping and high-spatial precision farmland management.

Classification of field wheat varieties based on a lightweight G-PPW-VGG11 model.

Introduction: In agriculture, especially wheat cultivation, farmers often use multi-variety planting strategies to reduce monoculture-related harvest risks. However, the subtle morphological differences among wheat varieties make accurate discrimination technically challenging. Traditional variety classification methods, reliant on expert knowledge, are inefficient for modern intelligent agricultural management. Numerous existing classification models are computationally complex, memory-intensive, and difficult to deploy on mobile devices effectively. This study introduces G-PPW-VGG11, an innovative lightweight convolutional neural network model, to address these issues. Methods: G-PPW-VGG11 ingeniously combines partial convolution (PConv) and partially mixed depthwise separable convolution (PMConv), reducing computational complexity and feature redundancy. Simultaneously, incorporating ECANet, an efficient channel attention mechanism, enables precise leaf information capture and effective background noise suppression. Additionally, G-PPW-VGG11 replaces traditional VGG11's fully connected layers with two pointwise convolutional layers and a global average pooling layer, significantly reducing memory footprint and enhancing nonlinear expressiveness and training efficiency. Results: Rigorous testing showed G-PPW-VGG11's superior performance, with an impressive 93.52% classification accuracy and only 1.79MB memory usage. Compared to VGG11, G-PPW-VGG11 showed a 5.89% increase in accuracy, 35.44% faster inference, and a 99.64% reduction in memory usage. G-PPW-VGG11 also surpasses traditional lightweight networks in classification accuracy and inference speed. Notably, G-PPW-VGG11 was successfully deployed on Android and its performance evaluated in real-world settings. The results showed an 84.67% classification accuracy with an average time of 291.04ms per image. Discussion: This validates the model's feasibility for practical agricultural wheat variety classification, establishing a foundation for intelligent management. For future research, the trained model and complete dataset are made publicly available.

[New vegetation index fusing visible-infrared and shortwave infrared spectral feature for winter wheat LAI retrieval].

Considering the great relationships between shortwave infrared (SWIR) and leaf area index (LAI), innovative indices based on water vegetation indices and visible-infrared vegetation indices were presented. In the present work, PROSAIL model was used to study the saturation sensitivity of new vegetation indices to LAI. The estimate models about LAI of winter wheat were built on the basis of the experiment data in 2009 acting as train sample and their precisions were evaluated and tested on the basis of the experiment data in 2008. Ten visible-infrared vegetation indices and five water vegetation indices were used to construct new indices. The result showed that newly developed indices have significant relationships with LAI by numerical simulations and in-situ measurements. In particular, by implementing modified standardized LAI Determining Index (sLAIDI *), all new indices were neither sensitive to water variations nor affected by saturation at high LAI levels. The evaluation models could improve prediction accuracy and have well reliability for LAI retrieval. The result indicated that visible-infrared vegetation indices combined with water index have greater advantage for LAI estimation.

A novel method for maize leaf disease classification using the RGB-D post-segmentation image data.

Maize (Zea mays L.) is one of the most important crops, influencing food production and even the whole industry. In recent years, global crop production has been facing great challenges from diseases. However, most of the traditional methods make it difficult to efficiently identify disease-related phenotypes in germplasm resources, especially in actual field environments. To overcome this limitation, our study aims to evaluate the potential of the multi-sensor synchronized RGB-D camera with depth information for maize leaf disease classification. We distinguished maize leaves from the background based on the RGB-D depth information to eliminate interference from complex field environments. Four deep learning models (i.e., Resnet50, MobilenetV2, Vgg16, and Efficientnet-B3) were used to classify three main types of maize diseases, i.e., the curvularia leaf spot [Curvularia lunata (Wakker) Boedijn], the small spot [Bipolaris maydis (Nishik.) Shoemaker], and the mixed spot diseases. We finally compared the pre-segmentation and post-segmentation results to test the robustness of the above models. Our main findings are: 1) The maize disease classification models based on the pre-segmentation image data performed slightly better than the ones based on the post-segmentation image data. 2) The pre-segmentation models overestimated the accuracy of disease classification due to the complexity of the background, but post-segmentation models focusing on leaf disease features provided more practical results with shorter prediction times. 3) Among the post-segmentation models, the Resnet50 and MobilenetV2 models showed similar accuracy and were better than the Vgg16 and Efficientnet-B3 models, and the MobilenetV2 model performed better than the other three models in terms of the size and the single image prediction time. Overall, this study provides a novel method for maize leaf disease classification using the post-segmentation image data from a multi-sensor synchronized RGB-D camera and offers the possibility of developing relevant portable devices.

[Hyperspectral estimation of leaf water content for winter wheat based on grey relational analysis (GRA)].

The objective of the present study was to compare two methods for the precision of estimating leaf water content (LWC) in winter wheat by combining stepwise regression method and partial least squares (SRM-PLS) or PLS based on the relational degree of grey relational analysis (GRA) between water vegetation indexes (WVIs) and LWC. Firstly, data utilized to analyze the grey relationships between LWC and the selected typical WVIs were used to determine the sensitivity of different WVIs to LWC. Secondly, the two methods of estimating LWC in winter wheat were compared, one was to directly use PLS and the other was to combine SRM and PLS, and then the method with the highest determination coefficient (R2) and lowest root mean square error (RMSE) was selected to estimate LWC in winter wheat. The results showed that the relationships between the first five WVI and LWC were stable by using GRA, and then LWC was estimated by using PLS and SRM-PLS at the whole stages with the R2 and RMSEs being 0.605 and 0.575, 4.75% and 7.35%, respectively. The results indicated that the estimation accuracy of LWC could be improved by using GRA firstly and then by using PLS and SRM-PLS.

[Monitoring the chlorophyll fluorescence parameter Fv/Fm in compact corn based on different hyperspectral vegetation indices].

In order to further assess the feasibility of monitoring the chlorophyll fluorescence parameter Fv/Fm in compact corn by hyperspectral remote sensing data, in the present study, hyperspectral vegetation indices from in-situ remote sensing measurements were utilized to monitor the chlorophyll fluorescence parameter Fv/Fm measured in the compact corn experiment. The relationships were analyzed between hyperspectral vegetation indices and Fv/Fm, and the monitoring models were established for Fv/Fm in the whole growth stages of compact corn. The results indicated that Fv/Fm was significantly correlated to the hyperspectral vegetation indices. Among them, structure-sensitive pigment index (SIPI) was the most sensitive remote sensing variable for monitoring Fv/Fm with correlation coefficient (r) of 0.88. The monitoring model of Fv/Fm was established on the base of SIPI, and the determination coefficients (r2) and the root mean square errors (RMSE) were 0.8126 and 0.082 respectively. The overall results suggest that hyperspectral vegetation indices can be potential indicators to monitor Fv/Fm during growth stages of compact corn.

[Estimated nitrogen nutrition index based on the hyperspectral for wheat of drip irrigation under mulch].

The accurate wheat management needs a reasonable nitrogen application, and it is one of the key measures for real-time and quantitatively monitoring of nitrogen status to gain the higher yield of wheat. In the present study, two field experiments were conducted with different nitrogen stress and wheat cultivars, the relationship was analyzed between spectral parameters and the partial factor productivity from applied N (PFPn), and the estimating model was established for PFP, in the growth stages of wheat. The result indicated that there was a highly significant correlation between the PFP, and GreenNDVI at jointing, the correlation coefficient (r) was 0.6404, the estimating model of PFPn was established, and the root mean square errors (RMSE) was 0.4597. The result indicated that the PFPn can be effectively estimated by using spectral parameters.

Changes in Vertical Phenotypic Traits of Rice (Oryza sativa L.) Response to Water Stress.

Drought-rehydration irrigation has an enhancing impact on rice yield, but the current research on its yield-increasing effect is mainly experimental and empirical, lacking mechanism theoretical support. Image-based machine vision is rapidly developing and can estimate crop physical and chemical properties. A novel image processing method has been purposefully carried out to detect the real-time response shape of rice drought-rehydration. By application of this method, two new types of morphological descriptors were proposed to characterize and quantify the vertical phenotypic heterogeneity of rice, in which the relative height of the plant centroid (RHC) locates the growth focus, while the leaf angle distribution model describes the vertical characteristics of the leaf phenotypic traits. We verified the response of the vertical traits to different water treatments through designed experiments. The results showed that the RHC and leaf angle distribution parameters followed divergent trends under water stress, reflecting the drought characteristics of rice at different growth stages. The newly developed indicators were sensitive to drought response at specific growth stages and also efficient for evaluating rice growth, including determination of radiation interception capacity and assessment of nutrient accumulation. Furthermore, through the measurement and analysis of vertical structural traits, we found that a short-term water deficit and reasonable rehydration during the rice heading period could help to extend the spike-growing time and improve photosynthetic efficiency, thus benefiting yield formation.

Estimation of potato above-ground biomass based on unmanned aerial vehicle red-green-blue images with different texture features and crop height.

Obtaining crop above-ground biomass (AGB) information quickly and accurately is beneficial to farmland production management and the optimization of planting patterns. Many studies have confirmed that, due to canopy spectral saturation, AGB is underestimated in the multi-growth period of crops when using only optical vegetation indices. To solve this problem, this study obtains textures and crop height directly from ultrahigh-ground-resolution (GDS) red-green-blue (RGB) images to estimate the potato AGB in three key growth periods. Textures include a grayscale co-occurrence matrix texture (GLCM) and a Gabor wavelet texture. GLCM-based textures were extracted from seven-GDS (1, 5, 10, 30, 40, 50, and 60 cm) RGB images. Gabor-based textures were obtained from magnitude images on five scales (scales 1-5, labeled S1-S5, respectively). Potato crop height was extracted based on the generated crop height model. Finally, to estimate potato AGB, we used (i) GLCM-based textures from different GDS and their combinations, (ii) Gabor-based textures from different scales and their combinations, (iii) all GLCM-based textures combined with crop height, (iv) all Gabor-based textures combined with crop height, and (v) two types of textures combined with crop height by least-squares support vector machine (LSSVM), extreme learning machine, and partial least squares regression techniques. The results show that (i) potato crop height and AGB first increase and then decrease over the growth period; (ii) GDS and scales mainly affect the correlation between GLCM- and Gabor-based textures and AGB; (iii) to estimate AGB, GLCM-based textures of GDS1 and GDS30 work best when the GDS is between 1 and 5 cm and 10 and 60 cm, respectively (however, estimating potato AGB based on Gabor-based textures gradually deteriorates as the Gabor convolution kernel scale increases); (iv) the AGB estimation based on a single-type texture is not as good as estimates based on multi-resolution GLCM-based and multiscale Gabor-based textures (with the latter being the best); (v) different forms of textures combined with crop height using the LSSVM technique improved by 22.97, 14.63, 9.74, and 8.18% (normalized root mean square error) compared with using only all GLCM-based textures, all Gabor-based textures, the former combined with crop height, and the latter combined with crop height, respectively. Therefore, different forms of texture features obtained from RGB images acquired from unmanned aerial vehicles and combined with crop height improve the accuracy of potato AGB estimates under high coverage.

Estimation of the nitrogen content of potato plants based on morphological parameters and visible light vegetation indices.

Plant nitrogen content (PNC) is an important indicator to characterize the nitrogen nutrition status of crops, and quickly and efficiently obtaining the PNC information aids in fertilization management and decision-making in modern precision agriculture. This study aimed to explore the potential to improve the accuracy of estimating PNC during critical growth periods of potato by combining the visible light vegetation indices (VIs) and morphological parameters (MPs) obtained from an inexpensive UAV digital camera. First, the visible light VIs and three types of MPs, including the plant height (H), canopy coverage (CC) and canopy volume (CV), were extracted from digital images of the potato tuber formation stage (S1), tuber growth stage (S2), and starch accumulation stage (S3). Then, the correlations of VIs and MPs with the PNC were analyzed for each growth stage, and the performance of VIs and MPs in estimating PNC was explored. Finally, three methods, multiple linear regression (MLR), k-nearest neighbors, and random forest, were used to explore the effect of MPs on the estimation of potato PNC using VIs. The results showed that (i) the values of potato H and CC extracted based on UAV digital images were accurate, and the accuracy of the pre-growth stages was higher than that of the late growth stage. (ii) The estimation of potato PNC by visible light VIs was feasible, but the accuracy required further improvement. (iii) As the growing season progressed, the correlation between MPs and PNC gradually decreased, and it became more difficult to estimate the PNC. (iv) Compared with individual MP, multi-MPs can more accurately reflect the morphological structure of the crop and can further improve the accuracy of estimating PNC. (v) Visible light VIs combined with MPs improved the accuracy of estimating PNC, with the highest accuracy of the models constructed using the MLR method (S1: R 2 = 0.79, RMSE=0.27, NRMSE=8.19%; S2:R 2 = 0.80, RMSE=0.27, NRMSE=8.11%; S3: R 2 = 0.76, RMSE=0.26, NRMSE=8.63%). The results showed that the combination of visible light VIs and morphological information obtained by a UAV digital camera could provide a feasible method for monitoring crop growth and plant nitrogen status.

High-resolution crop yield and water productivity dataset generated using random forest and remote sensing.

Accurate and high-resolution crop yield and crop water productivity (CWP) datasets are required to understand and predict spatiotemporal variation in agricultural production capacity; however, datasets for maize and wheat, two key staple dryland crops in China, are currently lacking. In this study, we generated and evaluated a long-term data series, at 1-km resolution of crop yield and CWP for maize and wheat across China, based on the multiple remotely sensed indicators and random forest algorithm. Results showed that MOD16 products are an accurate alternative to eddy covariance flux tower data to describe crop evapotranspiration (maize and wheat RMSE: 4.42 and 3.81 mm/8d, respectively) and the proposed yield estimation model showed accuracy at local (maize and wheat rRMSE: 26.81 and 21.80%, respectively) and regional (maize and wheat rRMSE: 15.36 and 17.17%, respectively) scales. Our analyses, which showed spatiotemporal patterns of maize and wheat yields and CWP across China, can be used to optimize agricultural production strategies in the context of maintaining food security.

Estimation of plant height and yield based on UAV imagery in faba bean (Vicia faba L.).

BACKGROUND: Faba bean is an important legume crop in the world. Plant height and yield are important traits for crop improvement. The traditional plant height and yield measurement are labor intensive and time consuming. Therefore, it is essential to estimate these two parameters rapidly and efficiently. The purpose of this study was to provide an alternative way to accurately identify and evaluate faba bean germplasm and breeding materials. RESULTS: The results showed that 80% of the maximum plant height extracted from two-dimensional red-green-blue (2D-RGB) images had the best fitting degree with the ground measured values, with the coefficient of determination (R2), root-mean-square error (RMSE), and normalized root-mean-square error (NRMSE) were 0.9915, 1.4411 cm and 5.02%, respectively. In terms of yield estimation, support vector machines (SVM) showed the best performance (R2 = 0.7238, RMSE = 823.54 kg ha-1, NRMSE = 18.38%), followed by random forests (RF) and decision trees (DT). CONCLUSION: The results of this study indicated that it is feasible to monitor the plant height of faba bean during the whole growth period based on UAV imagery. Furthermore, the machine learning algorithms can estimate the yield of faba bean reasonably with the multiple time points data of plant height.

Evaluating how lodging affects maize yield estimation based on UAV observations.

Timely and accurate pre-harvest estimates of maize yield are vital for agricultural management. Although many remote sensing approaches have been developed to estimate maize yields, few have been tested under lodging conditions. Thus, the feasibility of existing approaches under lodging conditions and the influence of lodging on maize yield estimates both remain unclear. To address this situation, this study develops a lodging index to quantify the degree of lodging. The index is based on RGB and multispectral images obtained from a low-altitude unmanned aerial vehicle and proves to be an important predictor variable in a random forest regression (RFR) model for accurately estimating maize yield after lodging. The results show that (1) the lodging index accurately describes the degree of lodging of each maize plot, (2) the yield-estimation model that incorporates the lodging index provides slightly more accurate yield estimates than without the lodging index at three important growth stages of maize (tasseling, milking, denting), and (3) the RFR model with lodging index applied at the denting (R5) stage yields the best performance of the three growth stages, with R2 = 0.859, a root mean square error (RMSE) of 1086.412 kg/ha, and a relative RMSE of 13.1%. This study thus provides valuable insight into the precise estimation of crop yield and demonstra\tes that incorporating a lodging stress-related variable into the model leads to accurate and robust estimates of crop grain yield.

Estimation of soybean yield parameters under lodging conditions using RGB information from unmanned aerial vehicles.

The estimation of yield parameters based on early data is helpful for agricultural policymakers and food security. Developments in unmanned aerial vehicle (UAV) platforms and sensor technology help to estimate yields efficiency. Previous studies have been based on less cultivars (<10) and ideal experimental environments, it is not available in practical production. Therefore, the objective of this study was to estimate the yield parameters of soybean (Glycine max (L.) Merr.) under lodging conditions using RGB information. In this study, 17 time point data throughout the soybean growing season in Nanchang, Jiangxi Province, China, were collected, and the vegetation index, texture information, canopy cover, and crop height were obtained by UAV-image processing. After that, partial least squares regression (PLSR), logistic regression (Logistic), random forest regression (RFR), support vector machine regression (SVM), and deep learning neural network (DNN) were used to estimate the yield parameters. The results can be summarized as follows: (1) The most suitable time point to estimate the yield was flowering stage (48 days), which was when most of the soybean cultivars flowered. (2) The multiple data fusion improved the accuracy of estimating the yield parameters, and the texture information has a high potential to contribute to the estimation of yields, and (3) The DNN model showed the best accuracy of training (R2=0.66 rRMSE=32.62%) and validation (R2=0.50, rRMSE=43.71%) datasets. In conclusion, these results provide insights into both best estimate period selection and early yield estimation under lodging condition when using remote sensing.

Universal detection of curved rice panicles in complex environments using aerial images and improved YOLOv4 model.

Accurate and rapid identification of the effective number of panicles per unit area is crucial for the assessment of rice yield. As part of agricultural development, manual observation of effective panicles in the paddy field is being replaced by unmanned aerial vehicle (UAV) imaging combined with target detection modeling. However, UAV images of panicles of curved hybrid Indica rice in complex field environments are characterized by overlapping, blocking, and dense distribution, imposing challenges on rice panicle detection models. This paper proposes a universal curved panicle detection method by combining UAV images of different types of hybrid Indica rice panicles (leaf-above-spike, spike-above-leaf, and middle type) from four ecological sites using an improved You Only Look Once version 4 (YOLOv4) model. MobileNetv2 is used as the backbone feature extraction network based on a lightweight model in addition to a focal loss and convolutional block attention module for improved detection of curved rice panicles of different varieties. Moreover, soft non-maximum suppression is used to address rice panicle occlusion in the dataset. This model yields a single image detection rate of 44.46 FPS, and mean average precision, recall, and F1 values of 90.32%, 82.36%, and 0.89%, respectively. This represents an increase of 6.2%, 0.12%, and 16.24% from those of the original YOLOv4 model, respectively. The model exhibits superior performance in identifying different strain types in mixed and independent datasets, indicating its feasibility as a general model for detection of different types of rice panicles in the heading stage.

Assessment of Water and Nitrogen Use Efficiencies Through UAV-Based Multispectral Phenotyping in Winter Wheat.

Unmanned aerial vehicle (UAV) based remote sensing is a promising approach for non-destructive and high-throughput assessment of crop water and nitrogen (N) efficiencies. In this study, UAV was used to evaluate two field trials using four water (T0 = 0 mm, T1 = 80 mm, T2 = 120 mm, and T3 = 160 mm), and four N (T0 = 0, T1 = 120 kg ha-1, T2 = 180 kg ha-1, and T3 = 240 kg ha-1) treatments, respectively, conducted on three wheat genotypes at two locations. Ground-based destructive data of water and N indictors such as biomass and N contents were also measured to validate the aerial surveillance results. Multispectral traits including red normalized difference vegetation index (RNDVI), green normalized difference vegetation index (GNDVI), normalized difference red-edge index (NDRE), red-edge chlorophyll index (RECI) and normalized green red difference index (NGRDI) were recorded using UAV as reliable replacement of destructive measurements by showing high r values up to 0.90. NGRDI was identified as the most efficient non-destructive indicator through strong prediction values ranged from R 2 = 0.69 to 0.89 for water use efficiencies (WUE) calculated from biomass (WUE.BM), and R 2 = 0.80 to 0.86 from grain yield (WUE.GY). RNDVI was better in predicting the phenotypic variations for N use efficiency calculated from nitrogen contents of plant samples (NUE.NC) with high R 2 values ranging from 0.72 to 0.94, while NDRE was consistent in predicting both NUE.NC and NUE.GY by 0.73 to 0.84 with low root mean square errors. UAV-based remote sensing demonstrates that treatment T2 in both water 120 mm and N 180 kg ha-1 supply trials was most appropriate dosages for optimum uptake of water and N with high GY. Among three cultivars, Zhongmai 895 was highly efficient in WUE and NUE across the water and N treatments. Conclusively, UAV can be used to predict time-series WUE and NUE across the season for selection of elite genotypes, and to monitor crop efficiency under varying N and water dosages.

High-Throughput Measurements of Stem Characteristics to Estimate Ear Density and Above-Ground Biomass.

Total above-ground biomass at harvest and ear density are two important traits that characterize wheat genotypes. Two experiments were carried out in two different sites where several genotypes were grown under contrasted irrigation and nitrogen treatments. A high spatial resolution RGB camera was used to capture the residual stems standing straight after the cutting by the combine machine during harvest. It provided a ground spatial resolution better than 0.2 mm. A Faster Regional Convolutional Neural Network (Faster-RCNN) deep-learning model was first trained to identify the stems cross section. Results showed that the identification provided precision and recall close to 95%. Further, the balance between precision and recall allowed getting accurate estimates of the stem density with a relative RMSE close to 7% and robustness across the two experimental sites. The estimated stem density was also compared with the ear density measured in the field with traditional methods. A very high correlation was found with almost no bias, indicating that the stem density could be a good proxy of the ear density. The heritability/repeatability evaluated over 16 genotypes in one of the two experiments was slightly higher (80%) than that of the ear density (78%). The diameter of each stem was computed from the profile of gray values in the extracts of the stem cross section. Results show that the stem diameters follow a gamma distribution over each microplot with an average diameter close to 2.0 mm. Finally, the biovolume computed as the product of the average stem diameter, the stem density, and plant height is closely related to the above-ground biomass at harvest with a relative RMSE of 6%. Possible limitations of the findings and future applications are finally discussed.

Structural parameters for X-ray micro-computed tomography (µCT) and their relationship with the breakage rate of maize varieties.

BACKGROUND: High grain breakage rate is the main limiting factor encountered in the mechanical harvest of maize grain. X-ray micro-computed tomography (µCT) scanning technology could be used to obtain the three-dimensional structure of maize grain. Currently, the effect of maize grain structure on the grain breakage rate, determined using X-ray µCT scanning technology, has not been reported. Therefore, the objectives of this study are: (i) to obtain the shape, geometry, and structural parameters related to the breakage rate using X-ray µCT scanning technology; (ii) to explore relationships between these parameters and grain breakage rate. RESULT: In this study, 28 parameters were determined using X-ray µCT scanning technology. The maize breakage rate was mainly influenced by the grain specific surface area, subcutaneous cavity volume, sphericity, and density. In particular, the breakage rate was directly affected by the subcutaneous cavity volume and density. The maize variety with high density and low subcutaneous cavity volume had a low breakage rate. The specific surface area (r = 0.758*), embryo specific surface area (r = 0.927**), subcutaneous cavity volume ratio (0.581*), and subcutaneous cavity volume (0.589*) of maize grain significantly and positively correlated with breakage rate. The cavity specific surface area (- 0.628*) and grain density (- 0.934**) of maize grain significantly and negatively correlated with grain breakage rates. Grain shape (length, width, thickness, and aspect ratio) positively correlated with grain breakage rate but the correlation did not reach statistical significance. The susceptibility of grain breakage increased when kernel weight decreased (- 0.371), but the effect was not significant. CONCLUSIONS: The results indicate that X-ray µCT scanning technology could be effectively used to evaluate maize grain breakage rate. X-ray µCT scanning technology provided a more precise and comprehensive acquisition method to evaluate the shape, geometry, and structure of maize grain. Thus, data gained by X-ray µCT can be used as a guideline for breeding resistant breakage maize varieties. Grain density and subcutaneous cavity volume are two of the most important factors affecting grain breakage rate. Grain density, in particular, plays a vital role in grain breakage and this parameter can be used to predict the breakage rate of maize varieties.