Recommendations for successful virtual patient-assisted esthetic implant rehabilitation: A guide for optimal function and clinical efficiency.

OBJECTIVE: Complete arch implant rehabilitation necessitates meticulous treatment planning and high-level collaboration between surgical and prosthetic dental teams. Emerging virtual technologies hold considerable promise in streamlining this process. The aim of this article is to extend recommendations to clinicians venturing into the virtual patient-assisted esthetic implant rehabilitation workflow. OVERVIEW: This article summarizes recommendations for virtual patient-assisted esthetic implant rehabilitation in the following five aspects: three-dimensional data handling and superimposition, occlusion and virtual articulator integration in creating virtual patients, streamlined face- and prosthetic-driven surgical planning, reuse of presurgical data ("Copy & Paste"), and final impression for passive fitting of final restoration. To illustrate these principles, a case with complete-mouth implant rehabilitation completed within six visits using this virtual patient workflow is presented. CONCLUSION: The virtual patient workflow serves as an invaluable tool to perform treatment planning, enhance efficiency, and ensure predictable outcomes in esthetic complete arch implant rehabilitation. CLINICAL SIGNIFICANCE: Virtual workflows are increasingly prevalent in esthetic implant rehabilitation. Nevertheless, these workflows necessitate a distinct set of knowledge and tools divergent from conventional dentistry practices. This article offers guidelines and recommendations for dental clinicians who are new to this field.

Use of optical see-through head-mounted devices in dentistry - a scoping review.

AIM: The aim of this scoping review was to identify the scientific evidence related to the utilization of Optical See- Through Head-Mounted Display (OST-HMD) in dentistry, and to determine future research needs. METHODS: The research question was formulated using the "Population" (P), "Concept" (Cpt), and "Context" (Cxt) framework for scoping reviews. Existing literature was designated as P, OST-HMD as Cpt, and Dentistry as Cxt. An electronic search was conducted in PubMed, Embase, Web of Science, and CENTRAL. Two authors independently screened titles and abstracts and performed the full-text analysis. RESULTS: The search identified 286 titles after removing duplicates. Nine studies, involving 138 participants and 1760 performed tests were included in this scoping review. Seven of the articles were preclinical studies, one was a survey, and one was a clinical trial. The included manuscripts covered various dental fields: three studies in orthodontics, two in oral surgery, two in conservative dentistry, one in general dentistry, and the remaining one in prosthodontics. Five articles focused on educational purposes. Two brands of OST-HMD were used: in eight studies HoloLens Microsoft was used, while Google Glass was utilized in one article. CONCLUSIONS: The overall number of included studies was low; therefore, the available data from this review cannot yet support an evidence-based recommendation for the clinical use of OST-HMDs. However, the existing preclinical data indicate a significant capacity for clinical and educational implementation. Further adoption of these devices will facilitate more reliable and objective quality and performance assessments, as well as more direct comparisons with conventional workflows. More clinical studies must be conducted to substantiate the potential benefits and reliability for patients and clinicians.

Clinical use of digital applications for diagnostic and treatment planning in prosthodontics: A scoping review.

AIM: This scoping review aimed to compile and evaluate clinical trials investigating digital applications in prosthetic diagnostics and treatment planning by assessing their clinical relevance and future potential. METHODS: Following the PCC-framework for scoping reviews and combining the source of analysis (Population/P: "prosthodontics"), the technique of interest (Concept/C: "digital application") and the field of interest (Context/C: "diagnostics"), a three-pronged search strategy was applied in the database PubMed and Web of Science. Clinical trials (≥10 study participants, English/German) were considered until 2023-03-09. Reporting adhered to the PRISMA-ScR statement. RESULTS: The search identified 520 titles, of which 18 full-texts met the inclusion criteria for data extraction. The trials involved a total of 14,457 study participants and were mapped for prosthetic subdisciplines: fixed (n = 9; 50%) and removable (n = 4; 22%) prosthodontics, reconstructive dentistry in general (n = 3; 17%), and temporo-mandibular joint disorders (n = 2; 11%). Data merging of medical format files, as DICOM+STL, was the dominant digital application (n = 7; 39%); and virtual treatment simulation using digital smile design or digital wax-up represented the most frequent prosthetic diagnostics (n = 6; 33%). CONCLUSION: This scoping review identified a relatively low number of clinical trials. The future potential of digital diagnostics appears to be mostly related to the subdiscipline of fixed prosthodontics, especially regarding virtual treatment simulation for communication with the patient and among dental professionals. Artificial intelligence emerged as a key technology in many of the identified studies. Further research in this area is needed to explore the capabilities of digital technologies in prosthetic diagnostics and treatment planning.

Additively and subtractively manufactured implant-supported fixed dental prostheses: A systematic review.

AIM: To compare and report on the performance of implant-supported fixed dental prostheses (iFDPs) fabricated using additive (AM) or subtractive (SM) manufacturing. METHODS: An electronic search was conducted (Medline, Embase, Cochrane Central, Epistemonikos, clinical trials registries) with a focused PICO question: In partially edentulous patients with missing single (or multiple) teeth undergoing dental implant therapy (P), do AM iFDPs (I) compared to SM iFDPs (C) result in improved clinical performance (O)? Included were studies comparing AM to SM iFDPs (randomized clinical trials, prospective/retrospective clinical studies, case series, in vitro studies). RESULTS: Of 2'184 citations, no clinical study met the inclusion criteria, whereas six in vitro studies proved to be eligible. Due to the lack of clinical studies and considerable heterogeneity across the studies, no meta-analysis could be performed. AM iFDPs were made of zirconia and polymers. For SM iFDPs, zirconia, lithium disilicate, resin-modified ceramics and different types of polymer-based materials were used. Performance was evaluated by assessing marginal and internal discrepancies and mechanical properties (fracture loads, bending moments). Three of the included studies examined the marginal and internal discrepancies of interim or definitive iFDPs, while four examined mechanical properties. Based on marginal and internal discrepancies as well as the mechanical properties of AM and SM iFDPs, the studies revealed inconclusive results. CONCLUSION: Despite the development of AM and the comprehensive search, there is very limited data available on the performance of AM iFDPs and their comparison to SM techniques. Therefore, the clinical performance of iFDPs by AM remains to be elucidated.

Prosthetic articulator-based implant rehabilitation virtual patient: A technique bridging implant surgery and reconstructive dentistry.

This technique report describes a fully digital workflow to create a prosthetic articulator-based implant rehabilitation (PAIR) virtual patient for complete-arch or complete-mouth implant rehabilitation. This workflow uses a custom gothic arch tracer during the cone beam computed tomography (CBCT) scan and a 3-dimensional virtual facebow when superimposing data. The PAIR virtual patient possesses reliable centric relation and vertical dimension of occlusion and is compatible with virtual articulators. Computer-aided implant planning and a digital prosthetic design can be seamlessly integrated by using this virtual patient.

Impact of high-speed sintering and choice of preshaded monochrome or multilayered blanks on fatigue behavior of 4 mol% yttria-stabilized tetragonal zirconia polycrystal.

STATEMENT OF PROBLEM: High-speed sintering allows the rapid fabrication of esthetic restorations with adequate flexural strength. However, data on the fatigue behavior of high-speed sintered 4 mol% yttria-stabilized tetragonal zirconia polycrystal (4Y-TZP) are lacking. PURPOSE: The purpose of this in vitro study was to examine the effect of high-speed sintering and the preshading of blanks (monochrome versus multilayer) on the fatigue behavior of 4Y-TZP ceramics. MATERIAL AND METHODS: Four-point flexural strength specimens (N=405) were fabricated from high-speed sintered multilayer 4Y-TZP (Zolid DRS) processed at 1580 °C for about 20 minutes and conventionally sintered at 1450 °C for about 10 hours, multilayer 4Y-TZP (Zolid Gen-x), and monochrome 4Y-TZP (Ceramill Zolid HT+PS), the control group. The specimens were loaded under 5 different dynamic test conditions for fatigue testing (P1-P5). Three were step-stress protocols (P1: 50 N for 5000 cycles; P2: 10 N for 1000 cycles, P3: 5% for 5000 cycles), 1 was tested with a constant force of 720 N (P4), and 1 was tested for different constant load levels (P5). For analysis of P1-P3, the Kaplan-Meier test and Mantel Cox test were performed (α=.05). P4 was analyzed with the Kolmogorov-Smirnov, Kruskal-Wallis, and Mann-Whitney U tests, and P5 by creating a load-cycle diagram. A fracture analysis was performed. RESULTS: ZMLC showed better fatigue behavior than ZMLH (P≤.006) and ZMOC (P≤.002) in all 3 step-stress protocols (P1-P3). ZMLH showed results comparable with those for ZMOC (P≥.285). In P4 and P5, all materials showed comparable values (P=.163 for P4). CONCLUSIONS: The multilayer technique showed a positive effect on the fatigue behavior of 4Y-TZP. In contrast, high-speed sintering negatively influenced the fatigue behavior of multilayer 4Y-TZP. The high-speed sintered material showed no deterioration compared with the conventional sintered monochrome material.

Patient-reported outcome measures compared to professional dental assessments of monolithic ZrO2 implant fixed dental prostheses in complete digital workflows: A double-blind crossover randomized controlled trial.

PURPOSE: This double-blind randomized controlled trial analyzed patient-reported outcome measures in terms of subjective patient satisfaction compared to objective dental evaluation of prosthetic treatment with 3-unit monolithic zirconium dioxide implant fixed dental prostheses (iFDPs) in 3 digital workflows. MATERIAL AND METHODS: Twenty patients were restored with 3 iFDPs each on Straumann TL-implants with 2 completely digital workflows using different intraoral optical scanning systems with model-free fabrication of the restoration (Trios 3/3Shape [Test-1]; Virtuo Vivo/Straumann [Test-2]), and mixed analog-digital workflow with conventional impressions and digitized gypsum casts (Impregum/3M Espe [Control]). The order of impression-taking and the prosthetic try-in were randomly allocated. Sixty iFDPs were compared for patient satisfaction and dental evaluation using ANOVA. RESULTS: For iFDP evaluation, patients generally provided more favorable ratings than dental experts, regardless of the workflow. ANOVA revealed no significant difference for overall satisfaction when comparing Test-1, Test-2, or Control, either for patients (f-ratio: 0.13; p = 0.876) or dentist (f-ratio: 1.55: p = 0.221). Secondary, patients clearly favored the digital impression workflows over the conventional approach (f-ratio: 14.57; p < 0.001). Overall, the 3Shape workflow (Test-1) received the highest scores for all analyses. CONCLUSIONS: The different digital workflows demonstrated minor influence on the subjective and objective evaluation of the monolithic zirconium dioxide iFDPs in nonesthetic regions; however, the dentist may significantly increase patient satisfaction by choosing intraoral scanning instead of conventional impressions. The dentist has to consider individual patients' needs to fulfill their expectations for a personalized solution.

Comparison of functional and esthetic outcomes in digital versus analog rehabilitation of one-piece screw-retained implant crowns placed at second stage surgery.

PURPOSE: Analog and digital impressions are established procedures for restoration of single-tooth implants. In this study, single-tooth implants were restored with definitive restorations during second-stage surgery. Analog and digital workflows were compared. MATERIAL AND METHODS: Eighty single-tooth implants were examined in total. In 40 implants, an index was taken immediately after implant placement using composite resin to fabricate the final crowns (analog workflow). For the other 40 single-tooth implants, intraoral intraoperative scans were performed (digital workflow) during primary surgery. The custom-fabricated screw-retained crowns were placed during second-stage surgery. Photographs and examinations for the scores were taken at the time of the follow-up visit, 1-4 years after placement of the crowns. The number of treatment appointments required was recorded and the modified pink esthetic score (PES) was determined. Additionally, the functional implant prosthetic score (FIPS) was measured. RESULTS: The mean PES was 12.15/14 for the digital workflow and 11.95/14 for the analog workflow. The most common deficit was incomplete papillae for both workflows. Three treatment appointments were required for both workflows: (1) Scan and/or impressions making and patient consent, (2) implant placement, and (3) second-stage surgery with crown insertion. The FIPS was 9.1/10 for the digital workflow group and 9.2/10 for the analog workflow group. Common deficits presented as missing papillae as well as open approximal contacts. The FIPS was not significantly different between workflows (p = 0.679). The PES also did not show a statistically significant difference for both workflows (p = 0.654), however, the analog workflow showed better values for the papillae (p < 0.05). A significant difference was also found in the other PES values, with the digital workflow showing better results here (p < 0.05). A chronological analysis of the results of the digital technique showed that the cases treated last had significantly better values than the cases treated first. CONCLUSIONS: According to the results of this study, both workflows allowed placement of the definitive crowns on single-tooth implants during second-stage surgery. Both workflows were found to be equivalent in terms of esthetic results in this study, although the digital workflow demonstrated a learning curve.

Patient-reported outcome measures comparing static computer-aided implant surgery and conventional implant surgery for single-tooth replacement: A randomized controlled trial.

OBJECTIVE: To compare static computer-aided implant surgery (s-CAIS) and conventional implant surgery (CIS) for single-tooth replacement in posterior sites in terms of patient-reported outcome measures (PROMs). METHODS: Forty patients were divided into two groups for treatment with s-CAIS (Test) and CIS (Control). Patients' anxiety level was measured using the modified dental anxiety score before implant surgery. After surgery, patients completed two questionnaires for 7 days. The first questionnaire assessed pain level using a visual analog scale (VAS) and the incident rate of pain using a 5-point Likert scale; analgesic intake was also recorded. The second questionnaire investigated patients' oral health-related quality of life (OHRQoL) including postoperative symptoms, oral function, and daily activity. The difference between data was compared at significance level (α = 0.05). RESULTS: There was no statistically significant difference in pretreatment dental anxiety level, postoperative pain scores, and OHRQoL between treatment groups. Overall, mild or moderate dental anxiety was reported by 70% and 20% of patients, respectively. Pain score was significantly reduced by postoperative Day 3 in the test group and Day 4 in the control group, compared with baseline. Both groups significant reduced analgesic intake by postoperative Day 5. Most OHRQoL-related complaints subsided approximately 3 days after surgery. CONCLUSIONS: Overall, PROMs between s-CAIS and CIS were not significantly different for the single-tooth implant surgery in the posterior area. Postoperative symptoms after implant surgery still inevitably occurred, reflecting the normal process of oral wound healing.

Personalized workflows in reconstructive dentistry-current possibilities and future opportunities.

OBJECTIVES: The increasing collection of health data coupled with continuous IT advances have enabled precision medicine with personalized workflows. Traditionally, dentistry has lagged behind general medicine in the integration of new technologies: So what is the status quo of precision dentistry? The primary focus of this review is to provide a current overview of personalized workflows in the discipline of reconstructive dentistry (prosthodontics) and to highlight the disruptive potential of novel technologies for dentistry; the possible impact on society is also critically discussed. MATERIAL AND METHODS: Narrative literature review. RESULTS: Narrative literature review. CONCLUSIONS: In the near future, artificial intelligence (AI) will increase diagnostic accuracy, simplify treatment planning, and thus contribute to the development of personalized reconstructive workflows by analyzing e-health data to promote decision-making on an individual patient basis. Dental education will also benefit from AI systems for personalized curricula considering the individual students' skills. Augmented reality (AR) will facilitate communication with patients and improve clinical workflows through the use of visually guided protocols. Tele-dentistry will enable opportunities for remote contact among dental professionals and facilitate remote patient consultations and post-treatment follow-up using digital devices. Finally, a personalized digital dental passport encoded using blockchain technology could enable prosthetic rehabilitation using 3D-printed dental biomaterials. CLINICAL SIGNIFICANCE: Overall, AI can be seen as the door-opener and driving force for the evolution from evidence-based prosthodontics to personalized reconstructive dentistry encompassing a synoptic approach with prosthetic and implant workflows. Nevertheless, ethical concerns need to be solved and international guidelines for data management and computing power must be established prior to a widespread routine implementation.

Mechanical stability of dental CAD-CAM restoration materials made of monolithic zirconia, lithium disilicate, and lithium disilicate-strengthened aluminosilicate glass-ceramic with and without fatigue conditions.

STATEMENT OF PROBLEM: Studies investigating the mechanical stability of lithium disilicate-strengthened aluminosilicate glass-ceramic that do not require sintering after milling compared with other computer-aided design and computer-aided manufacturing (CAD-CAM) materials are lacking. PURPOSE: The purpose of this in vitro study was to investigate the flexural strength of CAD-CAM zirconia, lithium disilicate, and lithium disilicate-strengthened aluminosilicate glass-ceramics with and without fatigue conditions. MATERIAL AND METHODS: Specimens (N=90, n=15) (12×4×3 mm) from the following CAD-CAM materials were prepared and polished: lithium disilicate glass-ceramic (IPS e.max CAD); lithium disilicate-strengthened aluminosilicate glass-ceramic (N!ce); and zirconium dioxide ceramic (IPS e.max ZirCAD). All specimens were divided into 2 subgroups: immediate testing without aging and simulation of aging by using a mastication simulator for 1 200 000 cycles (5 °C-55 °C). Thereafter, flexural strength testing was performed by using a universal testing machine (1 mm/min) on nonaged and aged specimens. The data were evaluated by using nonparametric 2-way ANOVA and Wilcoxon rank post hoc tests (α=.05). RESULTS: Both the material type and aging significantly affected the results (P<.001). The interaction was not significant (P>.05). Under nonaged conditions, zirconium dioxide ceramic (1136 ±162 MPa) showed significantly higher mean ±standard deviation flexural strength (P<.001) than lithium disilicate (304 ±34 MPa) and lithium disilicate-strengthened aluminosilicate glass-ceramic (202 ±17 MPa). The glass-ceramic groups were also significantly different from each other (P<.001). After aging, zirconium dioxide (1087.9 ±185.3 MPa) also presented significantly higher mean ±standard deviation flexural strength (P<.001) than lithium disilicate (259 ±62 MPa) and lithium disilicate-strengthened aluminosilicate glass-ceramic (172 ±11 MPa) (P<.001). Aging significantly decreased the flexural strength of lithium disilicate (14.6%) (P=.03) and lithium disilicate-strengthened aluminosilicate glass-ceramic (14.5%) (P=.01) but had minimal effect on the zirconium dioxide ceramic (4.3%) (P=.29). CONCLUSIONS: Among the tested CAD-CAM materials, the mechanical performance of lithium disilicate-strengthened aluminosilicate glass-ceramic was comparable with that of lithium disilicate and considerably lower than that of zirconia. Aging decreased the flexural strength of both lithium disilicate and lithium disilicate-strengthened aluminosilicate glass-ceramic.

Digital fixed complete-arch rehabilitation: From virtual articulator mounting to clinical delivery.

The virtual articulator is a tool that reproduces the relationship between the jaws in a virtual environment. The purpose of this clinical report was to describe a completely digital protocol starting from the virtual articulator mounting to developing static and dynamic occlusion in a complex prosthetic rehabilitation.

Potential of intraoral optical scanning to evaluate motor skills' improvement for tooth preparation: A prospective cohort study.

INTRODUCTION: This prospective cohort study investigated the potential of digital assessment using intraoral scanning (IOS) combined with software analysis (prepCheck) to evaluate the outcome of repetitive tooth preparation and its influence on the acquisition of motor skills in dental students. MATERIALS AND METHODS: Twenty-six students completed 177 full-crown preparations of the same tooth in six practice sessions followed by a final examination. Preparations were assessed digitally using prepCheck and conventionally by calibrated faculty instructors. In addition, students assessed their own performance and this was compared with the instructors' assessments. RESULTS: Conventional assessment showed that students preparations improved over time, with 43.5% of students receiving score 2 (highest grade) at the fifth practice session. With the prepCheck assessment, statistically significant improvements indicated by an enlarged area within the tolerance range set at 0.2 mm were found between the first and the second practice session (7.5% improvement; 95% CI: 2.2%, 12.7%, p = 0.006), and between the first run and the final exam preparation (6.7%; 95% CI: 1.7%, 12.5%, p = 0.011). Agreement between instructor/student assessments was best immediately after students received visual feedback using prepCheck (76% agreement; Spearman's rho 0.78). CONCLUSION: These data indicate that IOS technology was useful for student's self-evaluation by visual feedback.

Trueness and Precision of Economical Smartphone-Based Virtual Facebow Records.

PURPOSE: To investigate the trueness and precision of virtual facebow records using a smartphone as a three-dimensional (3D) face scanner. MATERIAL AND METHODS: Twenty repeated virtual facebow records were performed on two subjects using a smartphone as a 3D face scanner. For each subject, a virtual facebow was attached to his/her maxillary arch, and face scans were performed using a smartphone with a 3D scan application. The subject's maxillary arch intraoral scan was aligned to the face scan by the virtual facebow fork. This procedure was repeated 10 times for each subject. To investigate if the maxillary scan is located at the right position to the face, these virtual facebow records were superimposed to a cone-beam computed tomography (CBCT) head scan from the same subject by matching the face scan to the 3D face reconstruction from CBCT images. The location of maxillary arch in virtual facebow records was compared with its position in CBCT. The "trueness" of the proposed procedure is defined as the deviation between maxilla arch position in virtual facebow records and the CBCT images. The "precision" is defined as the deviation between each virtual facebow record. The linear deviation at left central incisor (#9), left first molar (#14), and right first molar (#3), as well as angular deviation of occlusal plane were analyzed with descriptive statistics. Differences between two objects were also explored with Mann Whitney U test. RESULTS: The 20 virtual facebow records using the smartphone 3D scanner deviated from the CBCT measurements (trueness) by 1.14 ± 0.40 mm at #9, 1.20 ± 0.50 mm at #14, 1.12 ± 0.51 mm at the #3, and 1.48 ± 0.56° in the occlusal plane. The VFTs deviated from each other by 1.06 ± 0.50 mm at #9, 1.09 ± 0.49 mm at #14, 1.11 ± 0.58 mm at #3, and 0.81 ± 0.58° in the occlusal plane. When all sites combined, the trueness was 1.14 ± 0.40 mm, and the precision was 1.08 ± 0.52 mm. Out of eight measurements, three measurements were significantly different between subjects. Nevertheless, the mean difference was small. CONCLUSIONS: Virtual facebow records made using smartphone-based face scan can capture the maxilla position with high trueness and precision. The deviation can be anticipated as around 1 mm in linear distance and 1° in angulation.

Retrospective analysis of the long-term effect of subgingival air polishing in supportive periodontal therapy.

AIM: Glycine powder air polishing (GPAP) procedure has become popular. Aim of the analysis was to compare the clinical outcomes during supportive periodontal therapy (SPT) of subgingival application of GPAP with those using sole conventional mechanical debridement (SC). MATERIAL AND METHODS: Over a median SPT period of 5.3 years (re-evaluation through last observation), the GPAP cohort (n = 263) received supra- and subgingival biofilm removal with GPAP. Supragingival calculus was removed using curets and sonic scalers here. Patients in the SC cohort (n = 264) were treated with sonic scalers, curets and rubber cup polishing only. Changes in, that is pocket probing depth (PPD) and furcation involvement were assessed retrospectively. A bootstrapping equivalence testing method in line with the principle of the two one-sided tests (TOST) procedure was used to compare clinical outcomes. RESULTS: The GPAP procedure was statistically equivalent to SC regarding the number of sites with stable PPDs (83.3%; IQR 68.8%, 91.0% vs. 84.0%; IQR 77.8%, 90.0%). However, in the GPAP cohort, a trend towards deterioration in furcation status (no equivalence) was noted. CONCLUSIONS: In periodontal maintenance, the use of GPAP instead of mechanical plaque removal does not improve the clinical outcome. It seems to be contraindicated to treat furcation defects with GPAP only.

The Use and Performance of Artificial Intelligence in Prosthodontics: A Systematic Review.

(1) Background: The rapid pace of digital development in everyday life is also reflected in dentistry, including the emergence of the first systems based on artificial intelligence (AI). This systematic review focused on the recent scientific literature and provides an overview of the application of AI in the dental discipline of prosthodontics. (2) Method: According to a modified PICO-strategy, an electronic (MEDLINE, EMBASE, CENTRAL) and manual search up to 30 June 2021 was carried out for the literature published in the last five years reporting the use of AI in the field of prosthodontics. (3) Results: 560 titles were screened, of which 30 abstracts and 16 full texts were selected for further review. Seven studies met the inclusion criteria and were analyzed. Most of the identified studies reported the training and application of an AI system (n = 6) or explored the function of an intrinsic AI system in a CAD software (n = 1). (4) Conclusions: While the number of included studies reporting the use of AI was relatively low, the summary of the obtained findings by the included studies represents the latest AI developments in prosthodontics demonstrating its application for automated diagnostics, as a predictive measure, and as a classification or identification tool. In the future, AI technologies will likely be used for collecting, processing, and organizing patient-related datasets to provide patient-centered, individualized dental treatment.

Creating a virtual patient for completely edentulous computer-aided implant surgery: A dental technique.

A fully digital workflow for generating a virtual patient for completely edentulous computer-aided implant surgery is described. Existing dentures are temporarily relined with a radiopaque dental silicone material, and a cone beam computed tomography scan is made with the relined denture inserted. Then, scans of the relined denture are made with an intraoral scanner. The radiopaque silicone material increases the stability of the dentures and allows the a cone beam computed tomography images and the scans of the dentures to be superimposed to create a virtual patient. This technique may reduce laboratory work steps, clinical chairside time, and treatment costs.

Mandibular implant-supported fixed complete dental prostheses on implants with ultrashort and standard length: A pilot treatment.

Edentulous patients may be restored with complete-arch implant-supported fixed complete dental prostheses (IFCDPs) on angled distal implants or on parallel implants distributed equally across the mandible to increase the area of support. A treatment is presented to introduce the clinical concept of providing edentulous patients with an implant-supported fixed complete dental prosthesison parallel tissue-level implants in the mandible with standard length implants interforaminally and ultrashort implants distally. A structured prosthetic approach was used for the tooth arrangement with a modified workflow as per the Biofunctional Prosthetic System adapted for static computer-aided implant surgery (s-CAIS) and computer-aided design and computer-aided manufacturing (CAD-CAM) of the screw-retained implant-supported fixed complete dental prosthesis. The concept offered advantages in challenging anatomic, surgical, and prosthetic conditions; providing distal nonangled abutments and implant platforms, which were straightforward to clean. If necessary, the prosthesis could have been easily converted into a removable overdenture using the existing digital prosthetic arrangement. Should implant removal be required, the extrashort implants can be removed with minimal surgical risk or morbidity.

Sources of error in maximum intercuspation from complete dentate full-arch intraoral scans in vitro.

AIM: Recording maximum intercuspal position (ICP) is critical for many dental procedures. Digital ICP from intraoral scanners (IOSs) produces variable results. This study investigated the sources of error in recording ICP using an IOS and a recently reported method. MATERIALS AND METHODS: A set of dentate models was scanned three times in a Rexcan DS2 scanner. The models were then scanned six times with a Cerec Omnicam IOS. For each scan, 10 bilateral 'bite' scans were performed (n = 6 x 10 bite registrations). Three key points were identified on the first intraoral scan and automatically transplanted onto all subsequent scans. The key point method was validated by using a 'secondary' key point transplantation from each scan back to the three laboratory scans, where the location of each point was compared using one-way analysis of variance. Full-arch errors on the intraoral scans were identified by comparing the intermolar key point distances on all intraoral scans against the 'gold standard' model scans. Precision of the virtual occlusion was identified by comparing the distance between all upper-lower key point pairs for all intraoral scans using intraclass correlation. RESULTS: Automatic key points were transplanted to model scans with standard deviations (SDs) in location of ≤ 0.003 mm (upper [maxillary]) and ≤ 0.004 mm (lower [mandibular]) arch. The intermolar width of the intraoral scans had a mean error of 0.183 (± 0.061) mm (upper) and 0.017 (± 0.092) mm (lower) arch. Interocclusal key point separation showed poor reliability across groups, but good precision (SD < 0.022 mm) within groups. CONCLUSION: Automatic key points allowed valid linear distance comparisons across repeated scans. Poor trueness and precision in the full-arch intraoral scans adversely affected interocclusal registrations. Bite scan precision had a less detrimental effect on interocclusal registration.

Indirect Digital Workflow for Virtual Cross-Mounting of Fixed Implant-Supported Prostheses to Create a 3D Virtual Patient.

Mounting dental casts in an articulator is an important prerequisite for prosthodontic rehabilitation cases where the design of an accurate static and dynamic occlusion is needed. Virtual mounting can be achieved through the superimposition of various 3D images acquired from the hard and soft tissues of the patient. The purpose of this technical report is to describe a digital cross-mounting technique for patients undergoing implant-supported fixed prosthetic treatment. Through the use of face scanning, intraoral scanning, and cone beam computed tomography, this technique enables creation of a 3D virtual patient with occlusal registration in centric relation. Ultimately, the described methodology allows for the fabrication of definitive full-mouth implant-supported fixed prostheses.