Augmentation of keratinized tissue using autogenous soft-tissue grafts and collagen-based soft-tissue substitutes at teeth and dental implants: Histological findings in a pilot pre-clinical study.

AIM: To histomorphometrically assess three treatment modalities for gaining keratinized tissue (KT) at teeth and at dental implants. MATERIALS AND METHODS: In five dogs, the distal roots of the mandibular second, third and fourth premolars were extracted. Dental implants were placed at the distal root areas 2 months later. After another 2 months, KT augmentation was performed at both distal (implants) and at mesial root (teeth) areas in the presence (wKT groups) or absence (w/oKT groups) of a KT band at the mucosal/gingival level. Three treatment modalities were applied randomly: apically positioned flap only (APF), free gingival grafts (FGGs) and xenogeneic collagen matrices (XCMs). A combination of the above produced six groups. Two months later, tissue sections were harvested and analysed histomorphometrically. RESULTS: The median KT height and length were greatest at implants with FGG in both wKT (3.7 and 5.1 mm, respectively) and w/oKT groups (3.7 and 4.6 mm), and at teeth with FGG in wKT groups (3.7 and 6.1 mm) and with APF in the w/oKT groups (3.9 and 4.4 mm). The XCM and APF produced more favourable results at teeth than at implants. CONCLUSIONS: FGG was advantageous in gaining KT, especially at implants.

Effects of implant placement timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical canine model.

AIM: To determine the effects of implant timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical model. MATERIALS AND METHODS: Four implant placement protocols were randomly applied at the mesial root sites of the third and fourth mandibular premolars in 10 mongrel dogs: immediate placement (group IP), early placement (group EP), delayed placement with/without alveolar ridge preservation (groups ARP and DP, respectively). A connective-tissue graft (CTG) or porcine-derived volume-stable collagen matrix (VCMX) was applied to enhance the ridge profile (simultaneously with implant placement in group IP and staged for others), resulting in five sites for each combination. All dogs were sacrificed 3 months after soft-tissue grafting. Histological and histomorphometric analyses were performed, and the data were analysed descriptively. RESULTS: CTG and VCMX were difficult to differentiate from the augmented area. The median total tissue thickness on the buccal aspect of the implant was largest in group IP/CTG (between 2.78 and 3.87 mm). The soft-tissue thickness was generally favourable with CTG at all implant placement timings. Within the DP groups, CTG yielded statistically significantly larger total and soft-tissue thickness than VCMX (p < .05). Among the groups with VCMX, group EP/VCMX showed the largest soft-tissue thickness at apical levels to the implant shoulder. CONCLUSIONS: CTG generally led to greater tissue thickness than VCMX.

Is transmucosal healing of an implant as effective as submerged healing when simultaneous guided bone regeneration is performed? A preclinical study.

AIM: To investigate whether transmucosal healing is as effective as submerged healing in terms of buccal bone regeneration when guided bone regeneration (GBR) is performed simultaneously with implant placement. MATERIALS AND METHODS: In six dogs, buccal dehiscence defects were created in the edentulous mandibular ridge, sized 5 × 5 × 3 mm (length × height × depth). In each defect, a bone-level implant was placed, and four experimental groups were randomly assigned as follows: (i) transmucosal healing with GBR (T-GBR), (ii) transmucosal healing without GBR (T-control), (iii) submerged healing with GBR (S-GBR) and (iv) submerged healing without GBR (S-control). Data analyses were based on histological slides 5 months after implant placement. RESULTS: The T-GBR group showed significant differences compared to the control groups regarding defect height resolution, buccal bone thickness and mineralized tissue area (p < .05), but showed no significant differences when compared with the S-GBR group (p > .05). CONCLUSIONS: The mode of healing (transmucosal vs. submerged) does not influence bone regeneration at implant sites. The clinician may therefore choose the approach based on further clinical and patient-specific parameters.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study.

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Does an untreated peri-implant dehiscence defect affect the progression of peri-implantitis?: A preclinical in vivo experimental study.

OBJECTIVE: To investigate the early impact of plaque accumulation in a buccal dehiscence defect on peri-implant marginal bone resorption. MATERIALS AND METHODS: In six male Mongrel dogs, four dental implants were placed in the posterior maxilla on both sides (two implants per side). Based on the group allocation, each implant was randomly assigned to one of the following four groups to decide whether buccal dehiscence defect was prepared and whether silk ligation was applied at 8 weeks post-implant placement for peri-implantitis induction: UC (no defect without ligation); UD (defect without ligation); LC (no defect with ligation); and LD (defect with ligation) groups. Eight weeks after disease induction, the outcomes from radiographic and histologic analyses were statistically analyzed (p < .05). RESULTS: Based on radiographs, the exposed area of implant threads was smallest in group UC (p < .0083). Based on histology, both the distances from the implant platform to the first bone-to-implant contact point and to the bone crest were significantly longer in the LD group (p < .0083). In the UD group, some spontaneous bone fill occurred from the base of the defect at 8 weeks after implant placement. The apical extension of inflammatory cell infiltrate was significantly more prominent in the LD and LC groups compared to the UC group (p < .0083). CONCLUSION: Plaque accumulated on the exposed implant surface had a negative impact on maintaining the peri-implant marginal bone level, especially when there was a dehiscence defect around the implant.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study.

OBJECTIVE: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model. MATERIALS AND METHODS: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed. RESULTS: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.). CONCLUSIONS: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Immediate loading on two adjacent single dental implants with definitive nonsplinted restorations: A proof of concept in the posterior zone.

OBJECTIVES: To evaluate clinical, clinician- and patient-reported outcomes (PROs) of two adjacent single posterior implants immediately loaded with definitive single crowns up to 1 year. Ten patients in need of two adjacent posterior single implants were included. All implants were placed applying a fully digital workflow. Definitive screw-retained single zirconia crowns were delivered within 72 h after implant placement. Clinical parameters, patient- and clinician-reported outcomes were assessed up to 1 year of follow-up. CLINICAL CONSIDERATIONS: Clinical outcomes remained stable, with no implant failures or technical and biological complications throughout the observation period. Patient satisfaction was very high at baseline (crown delivery) and remained consistently high at 6 and 12 months of follow-up. Crown insertion 3 days after implant placement was rated as an easy procedure by clinicians. CONCLUSIONS: Two adjacent single implants with immediate definitive restorations (<72 h) in the posterior region appear to be a viable and easy treatment option to shorten the overall treatment time and potentially enhancing patient satisfaction. However, randomized controlled trials are needed to confirm the advantages of this treatment protocol over a delayed loading approach. CLINICAL SIGNIFICANCE: In selected cases, immediate implant loading with definitive restorations in the posterior region appears a valuable and straightforward option to shorten the overall treatment time.

Soft-tissue dimensional change following guided bone regeneration on peri-implant defects using soft-type block or particulate bone substitutes: 1-year outcomes of a randomized controlled clinical trial.

AIM: To compare the peri-implant soft-tissue dimensional changes following guided bone regeneration between particulate (particle group) and collagenated soft-block-type (block group) biphasic calcium phosphate (BCP). MATERIALS AND METHODS: This study investigated 35 subjects: 18 in the particle group and 17 in the block group. Cone-beam computed tomography obtained at 6 months post surgery and optical impressions taken periodically (before surgery, 6 months post surgery, and 1 year post surgery) were superimposed. The ridge contour changes over time and the peri-implant mucosal thicknesses were measured diagonally and horizontally, and analysed statistically. RESULTS: The increases in diagonal (1.12 ± 0.78 mm) and horizontal (2.79 ± 1.90 mm) ridge contour of the block group were significantly higher than those in the particle group during the first 6 months (p < .05); however, the contour hardly changed thereafter (diagonal: 0.07 ± 0.75 mm; horizontal: -0.34 ± 1.26 mm), resulting in the 1-year contour changes similar between the two groups. Regardless of the type of BCP, the ridge contour increased significantly over 1 year when the dehiscence defect had a contained configuration (p < .05). CONCLUSIONS: The increase in soft-tissue dimensions for 1 year was similar between the two groups. The mucosal contour increase was larger when the surgery was conducted in a more contained defect, and this was not influenced by the type of BCP.

Dimensional ridge changes in conjunction with four implant timing protocols and two types of soft tissue grafts: A pilot pre-clinical study.

AIM: To determine the effect of (1) implant placement timing and (2) the type of soft tissue graft in terms of ridge profile changes. MATERIALS AND METHODS: Four implant treatment modalities were applied in the mesial root areas of the third and fourth mandibular premolars of 10 mongrel dogs alongside connective-tissue graft (CTG) and volume-stable cross-linked collagen matrix (VCMX): immediate, early, and delayed placement (DP), and DP following alveolar ridge preservation (ARP). All dogs were sacrificed 3 months after soft tissue augmentation. Standard Tessellation Language files from designated time points were analysed. RESULTS: Compared with the pre-extraction situation, the median width of the ridge demontstrated a linear increase only in group ARP/CTG (0.07 mm at the 2-mm level), whereas all other groups showed a reduction (between -1.87 and -0.09 mm, p > .05). Groups ARP/CTG (0.17 mm) and DP/CTG (0.05 mm) exhibited a profilometric tissue gain in a set region of interest (p > .05). The net effect of CTG and VCMX ranged from 0.14 to 0.79 mm. CONCLUSIONS: Dimensional ridge changes varied between treatment protocols. ARP with CTG led to the smallest difference in ridge profile between the pre-extraction and the study end time point. Both CTG and VCMX enhanced the ridge contour.

Randomized controlled clinical trial comparing guided bone regeneration of peri-implant defects with soft-type block versus particulate bone substitutes: Six-month results of hard-tissue changes.

AIM: To test whether soft-type block bone substitute used for guided bone regeneration (GBR) of peri-implant defects leads to a different dimension of the augmented hard tissue than particulate bone substitute. MATERIALS AND METHODS: In 40 patients, 40 two-piece dental implants were placed >2 months after tooth extraction. Following random allocation, 20 peri-implant bone dehiscences were grafted with a soft-type block made of synthetic biphasic calcium phosphate (BCP) + collagen and 20 bone dehiscences with particulate BCP. All the sites were covered with a collagen membrane stabilized with titanium pins. Immediately after wound closure and after 6 months, the horizontal dimension (HD) of the augmented hard tissue was measured at the level of implant shoulder using cone beam computed tomography. During re-entry at 6 months, the defect fill was clinically assessed. RESULTS: At 6 months, the median HD measured 1.15 mm (mean: 1.31 mm) in the soft-block group and 0.93 mm (mean: 1.05 mm) in the particulate group (p = .6). At 6 months, 7.1% of contained defects and 61.9% of non-contained defects showed an incomplete vertical defect fill. CONCLUSIONS: Soft-type block of BCP + collagen used for GBR of peri-implant defects did not differ from particulate BCP regarding the dimension of the augmented hard tissue after 6 months of healing.

Effect of Schneiderian membrane integrity on bone formation in sinus augmentation: An experimental study in rabbits.

AIM: To assess the effect of Schneiderian membrane (SM) perforation on bone formation by applying a particulate deproteinized bovine bone mineral (PBBM). MATERIALS AND METHODS: Bilateral sinus augmentation was performed in eight rabbits. The same amount of PBBM was placed at a sinus where the SM was intentionally perforated for the perforation group (standardized to 3 mm diameter) and the other sinus with an intact SM that served as the intact group. At 12 weeks, all animals were euthanized for radiographic and histomorphometric analyses. RESULTS: The area of the newly formed bone in the perforation group was significantly less than that in the intact group (18.7% and 25.5%, respectively, p = .028). The newly formed bone in the area close to the perforated SM was significantly less than that in the intact group (18.7% and 26.1%, respectively, p < .05). However, there was no significant difference in the total augmented area (p = .234) and the total augmented volume (p = .382) between the two groups. CONCLUSION: SM perforation had an adverse effect on new bone formation, predominantly close to the area of membrane perforation. However, no significant difference was found in the total augmented volume between the SM perforation and the intact groups.

Effect of collagen membrane and of bone substitute on lateral bone augmentation with titanium mesh: An experimental in vivo study.

AIM: The aim of this study was to identify the additional effects of collagen membrane (CM) and of synthetic bone substitute (BS) on lateral bone augmentation of chronic peri-implant defect with titanium mesh (TM). MATERIALS AND METHODS: Atrophic alveolar ridge was induced in six canine mandibles, and 5 peri-implant defects were achieved in each hemi-mandible. Bone augmentation was attempted using the following randomly allocated modalities: (1) Control: no treatment, (2) TM only group: blood clot covered by TM, (3) TM+BS group: BS covered by TM, (4) TM+CM group: blood clot covered by TM and CM, and (5) TM+BS+CM group: BS covered by TM and CM. After 16 weeks of submerged healing, micro-CT and histomorphometric analyses were performed. RESULTS: TM exposure occurred in one case in the TM only group, one case in the TM+CM group, and two cases in the TM+BS+CM group. Histologically, pseudo-periosteum was observed along the inner and outer surfaces of TM, and the directions of the collagen fiber within the pseudo-periosteum differed according to the additional use of CM. In general, the TM only group rendered higher values in vertical defect fill and dimension of the augmented hard tissue in comparison with the other treatment groups. CONCLUSIONS: Due to the small sample size, this pilot study remains inconclusive. Within the limitations of the study, the use of CM and/or BS did not appear to have an additional benefit on lateral bone augmentation of peri-implant defect with TM.

Effectiveness of xenogeneic and synthetic bone-block substitute materials with/without recombinant human bone morphogenetic protein-2: A preclinical study using a rabbit calvarium model.

AIM: To investigate new bone (NB) formation by using bone-block substitute materials with/without recombinant human bone morphogenetic protein-2 (rhBMP-2). MATERIALS AND METHODS: Three synthetic bone-block substitute materials [biphasic calcium phosphate (BCP); nanostructured hydroxyapatite (NH); 3D-printed tricalcium phosphate/hydroxyapatite (3DP)] and one xenogeneic deproteinized bovine bone mineral (DBBM) block substitute were affixed to rabbit calvarium using osteosynthesis screws, either with rhBMP-2 (n = 12) or without rhBMP-2 (n = 16). At 2 or 12 weeks (n = 6 with rhBMP-2 and n = 8 without rhBMP-2 for each week), histologic, histomorphometric and microcomputed tomography analyses were performed. RESULTS: The application of rhBMP-2 increased NB formation in all experimental groups at both weeks. DBBM resulted in a greater area of NB compared with synthetic blocks either with or without rhBMP-2 at 2 weeks (2.8 ± 0.9 vs. 1.4 ± 0.5-1.9 ± 1.4 mm2 ; 1.4 ± 1.0 vs. 0.6 ± 0.3-0.9 ± 0.5 mm2 ) and without rhBMP-2 at 12 weeks (3.0 ± 0.8 vs. 1.7 ± 0.7-2.6 ± 1.5 mm2 ) (p > 0.05). NB formation did not differ significantly for DBBM and the three types of synthetic block with rhBMP-2 at 12 weeks (4.5 ± 2.0 vs. 3.8 ± 0.7-5.1 ± 1.1 mm2 ; p > 0.05). CONCLUSIONS: rhBMP-2 enhanced NB in all blocks. DBBM blocks yielded more NB than synthetic blocks without rhBMP-2. The application of rhBMP-2 appears to compensate for differences in late healing.

Immunohistochemical characteristics of lateral bone augmentation using different biomaterials around chronic peri-implant dehiscence defects: An experimental in vivo study.

AIM: To investigate the immunohistochemical characteristics of a highly porous synthetic bone substitute and a cross-linked collagen membrane for guided bone regeneration. METHODS: Three experimental groups were randomly allocated at chronic peri-implant dehiscence defect in 8 beagle dogs: (i) biphasic calcium phosphate covered by a cross-linked collagen membrane (test group), (ii) deproteinized bovine bone mineral covered by a natural collagen membrane (positive control) and (iii) no treatment (negative control). After 8 and 16 weeks of submerged healing, dissected tissue blocks were processed for immunohistochemical analysis. Seven antibodies were used to detect the remaining osteogenic and angiogenic potential, and quantitative immunohistochemical analysis was done by software. RESULTS: The antigen reactivity of alkaline phosphatase was significantly higher in the test group compared to the positive and negative controls, and it maintained till 16 weeks. The intensity of osteocalcin was significantly higher in the positive control at 8 weeks than the other groups, but significantly decreased at 16 weeks and no difference was found between the groups. A significant large number of TRAP-positive cells were observed in the test group mainly around the remaining particles at 16 weeks. The angiogenic potential was comparable between the groups showing no difference in the expression of transglutaminase II and vascular endothelial growth factor. CONCLUSION: Guided bone regeneration combining a highly porous biphasic calcium phosphate synthetic biomaterial with a crosslinked collagen membrane, resulted in extended osteogenic potential when compared to the combination of deproteinized bovine bone mineral and a native collagen membrane.

Addition of autogenous bone chips to deproteinized bovine bone mineral does not have additional benefit in lateral ridge augmentation-A preclinical in vivo experimental study.

OBJECTIVE: To compare the outcome after extensive lateral guided bone regeneration using deproteinized bovine bone mineral (DBBM) with or without autogenous bone chips in a canine model of chronic horizontal alveolar ridge defect. MATERIALS AND METHODS: The second, third and fourth lower premolars of both sides were extracted, and the buccal bone walls were completely removed in five beagle dogs. After 4 weeks, DBBM particles mixed with autogenous bone chips at a ratio of 1:1 were grafted at one side (DBBM/Auto group), while DBBM particles alone were grafted at the contralateral side (DBBM group). The graft materials on both sides were covered by a resorbable collagen membrane and fixation pins. Microcomputed tomographic volume and histomorphometric analyses were performed at 16 weeks post-surgery. RESULTS: The ridges of both groups were recovered horizontally, but new bone formation beyond the original ridge contour at the defect site was not found. The DBBM group exhibited a larger total radiographic augmented volume and new bone volume compared with the DBBM/Auto group, but the differences were minimal (p > .05). Histologically, the regenerated area and new bone area were also slightly larger without any statistical significance in the DBBM group than in the DBBM/Auto group (p > .05). CONCLUSION: The addition of autogenous bone chips to DBBM for lateral ridge augmentation may confer no advantage over grafting DBBM alone with respect to both space maintenance and de novo bone formation in dogs.

Secondary stability achieved in dental implants with a calcium-coated sandblasted, large-grit, acid-etched (SLA) surface and a chemically modified SLA surface placed without mechanical engagement: A preclinical study.

OBJECTIVES: To assess the osseointegration of calcium-coated (CS) and chemically modified, sandblasted, large-grit, acid-etched (MS) dental implants with a lack of primary mechanical stability. MATERIALS AND METHODS: Eighteen implants in CS and MS groups each were loosely placed in the mandible of six mongrel dogs and allowed to heal for 2, 4 and 8 weeks. Implant stability quotient (ISQ) and implant stability test (IST) values recorded periodically and bone-to-implant contact (BIC) and the number of Haversian canals per 1 mm2 measured histologically were statistically analysed (p < .05). RESULTS: All CS and MS implants placed survived. Compared with immediately after installation, ISQ and IST values in both groups increased significantly to over 76 at 2 weeks (p < .0083) and remained stable thereafter. BIC was significantly greater at 8 weeks (61.3 ± 13.6% in CS group; 57.6 ± 5.9% in MS group) compared to 2 and 4 weeks in both groups (p < .017). There were no significant intergroup differences in ISQ, IST or BIC at different time points. Significantly more Haversian canals were observed in group CS (6.2 ± 1.0/mm2 ) compared with group MS at 4 weeks (3.7 ± 1.8 /mm2 ; p < .05), while intergroup difference was not significant at 8 weeks. CONCLUSION: Both CS and MS implants inserted without primary stability obtained osseointegration within 2 weeks, and lamellar bone adjacent to the implants was first observed at 8 weeks. The formation of primary osteons was more active at 4 weeks in group CS than in group MS.

Significance of implant design on the efficacy of different peri-implantitis decontamination protocols.

OBJECTIVE: To assess the efficacy of three mechanical decontamination methods in four types of commercially available implants. MATERIAL AND METHODS: Ninety-six implants of four commercial brands with different designs (regarding thread depth and thread pitch) were soaked in a surrogate biofilm (ink) and air-dried. Circumferential standardized peri-implant defects with 6 mm in depth and 1.55 mm in width were custom-made with a 3D printer. Stained implants were inserted in the defects and instrumented with three different methods: a titanium brush (TNB), a metallic ultrasonic tip (IST) and an air abrasive (PF). Standardized photographs were taken vertically to the implant axis (flat view), and with angulations of 60° (upper view) and 120° (lower view) to the implant long axis. The percentage of residual stain (PRS) was calculated with the image analysis software. Scanning electron microscope evaluations were performed on the buccal aspect of the implants at the central level of the defect. RESULTS: The efficacy of PF was significantly inferior to the TNB and IST in all implant designs, while there were no significant differences between TNB and IST. IST showed significantly higher PRS in the implant with the highest thread pitch, while the TNB had the highest PRS in the implant with a marked reverse buttress-thread design. The micro-thread design had the lowest values of PRS for all decontamination methods. The apically facing threads represented the areas with highest PRS for all implant designs and decontamination methods. CONCLUSION: Thread geometry influenced the access of the decontamination devices and in turn its efficacy. Implants with lower thread pitch and thread depth values appeared to have less residual staining. CLINICAL RELEVANCE: Clinicians must be aware of the importance of thread geometry in the decontamination efficacy.

Immediate versus delayed application of bone morphogenetic protein-2 solution in damaged extraction sockets: a preclinical in vivo investigation.

OBJECTIVE: To compare the clinical, radiographic, and histological healing patterns between the immediate and delayed applications of bone morphogenetic protein-2 (BMP-2) in damaged extraction sockets in dogs. MATERIALS AND METHODS: The distal roots of the fourth premolars of the mandible were extracted bilaterally in five beagle dogs, and buccal bone defects (4 mm wide and 9 mm high) were surgically created. Collagenated biphasic calcium phosphate (CBCP) soaked for 10 min in 100 µL of BMP-2 solution was applied immediately to the defect site in the control group. In the test group, the BMP-2 solution of same dose was injected into the grafted site 2 weeks after grafting with a saline-soaked CBCP. The dogs were sacrificed 2 weeks later. Clinical, histological, and radiographic analyses were followed. RESULTS: Swelling and inflammatory reactions were predominantly observed in the control group at 2 weeks. The area of new bone formation was significantly larger in the control group compared with the test group (10.8 ± 7.0 mm2 [mean ± SD] and 6.3 ± 3.1 mm2, respectively; p = 0.043). No significant difference was found in ridge width at 2 mm, 4 mm and 6 mm below the lingual bone crest between the control (2.6 ± 1.0 mm, 3.2 ± 0.9 mm and 4.5 ± 0.5 mm, respectively) and test group (3.3 ± 1.0 mm, 3.7 ± 1.3 mm and 4.2 ± 1.0 mm; all p > 0.05). CONCLUSIONS: Delayed application of BMP-2 2 weeks after surgery did not show any advantage over immediate application of BMP-2 in terms of new bone formation. CLINICAL RELEVANCE: This study suggests that it might be better to apply BMP-2 immediately in alveolar ridge preservation, instead of delayed application, in order to enhance new bone formation.

Intranuclear Delivery of Nuclear Factor-Kappa B p65 in a Rat Model of Tooth Replantation.

After avulsion and replantation, teeth are at risk of bone and root resorption. The present study aimed to demonstrate that the intra-nuclear transducible form of transcription modulation domain of p65 (nt-p65-TMD) can suppress osteoclast differentiation in vitro, and reduce bone resorption in a rat model of tooth replantation. Cell viability and nitric oxide release were evaluated in RAW264.7 cells using CCK-8 assay and Griess reaction kit. Osteoclast differentiation was evaluated using quantitative reverse transcriptase-polymerase chain reaction (RT-PCR) and tartrate-resistant acid phosphatase (TRAP) staining. Thirty-two maxillary rat molars were extracted and stored in saline (n = 10) or 10 µM nt-p65-TMD solution (n = 22) before replantation. After 4 weeks, specimens were scored according to the inflammatory pattern using micro-computed tomography (CT) imaging and histological analyses. nt-p65-TMD treatment resulted in significant reduction of nitric oxide release and osteoclast differentiation as studied using PCR and TRAP staining. Further, micro-CT analysis revealed a significant decrease in bone resorption in the nt-p65-TMD treatment group (p < 0.05). Histological analysis of nt-p65-TMD treatment group showed that not only bone and root resorption, but also inflammation of the periodontal ligament and epithelial insertion was significantly reduced. These findings suggest that nt-p65-TMD has the unique capabilities of regulating bone remodeling after tooth replantation.

Volume stability of the augmented sinus using a collagenated bovine bone mineral grafted in case of a perforated Schneiderian membrane: An experimental study in rabbits.

OBJECTIVES: To determine the volume stability of a sinus augmented with a collagenated bovine bone mineral (CBBM) in case of an intact or perforated Schneiderian membrane (SM). MATERIALS AND METHODS: A bilateral sinus augmentation procedure was performed in eight rabbits. The SM was intentionally perforated in one side (SMP group), while it remained intact in contra-lateral side (control group) and the same amount of CBBM was then grafted. At 12 weeks, the animals were euthanized for radiographic and histomorphometric analyses. RESULTS: The augmented volume did not differ significantly between the two groups: 262.2 ± 32.1 mm3 in SMP group and 261.9 ± 48.5 mm3 in the control group (p = .959). There was no significant difference in the total augmented area: 24.7 ± 5.2 mm2 in SMP group and 23.2 ± 2.9 mm2 in the control group (p = .773). The areas of newly formed bone also did not differ significantly between the two groups, but was significantly lower at the centre of the augmented region than in the region of the surgical window in both groups (p < .05). CONCLUSION: A perforation of the SM in a rabbit model does neither impact the augmented volume nor new bone formation following grafting of the sinus with a CBBM.