Thymine-Modified Nanocarrier for Doxorubicin Delivery in Glioblastoma Cells.

Brain tumor glioblastoma is one of the worst types of cancer. The blood-brain barrier prevents drugs from reaching brain cells and shields glioblastoma from treatment. The creation of nanocarriers to improve drug delivery and internalization effectiveness may be the solution to this issue. In this paper, we report on a new nanocarrier that was developed to deliver the anticancer drug doxorubicin to glioblastoma cells. The nanocarrier was obtained by nanoemulsion polymerization of diallyl disulfide with 1-allylthymine. Diallyl disulfide is a redox-sensitive molecule involved in redox cell activities, and thymine is a uracil derivative and one of the well-known bioactive compounds that can enhance the pharmacological activity of doxorubicin. Doxorubicin was successfully introduced into the nanocarrier with a load capacity of about 4.6%. Biological studies showed that the doxorubicin nanocarrier composition is far more cytotoxic to glioblastoma cells (T98G) than it is to cancer cells (M-HeLa) and healthy cells (Chang liver). The nanocarrier improves the penetration of doxorubicin into T98G cells and accelerates the cells' demise, as is evident from flow cytometry and fluorescence microscopy data. The obtained nanocarrier, in our opinion, is a promising candidate for further research in glioblastoma therapy.

Cationic Imidazolium Amphiphiles Bearing a Methoxyphenyl Fragment: Synthesis, Self-Assembly Behavior, and Antimicrobial Activity.

Novel cationic amphiphiles of the 3-alkyl-1-(4-methoxyphenyl)-1H-imidazol-3-ium bromide series bearing methoxyphenyl fragments (MPI-n) have been synthesized. Their aggregation properties in aqueous solutions, solubilization capacity, and hemolytic and antimicrobial activities have been investigated by a number of physicochemical methods. Using tensiometry, conductometry, and fluorescence spectroscopy, it was shown that the MPI-n have lower CMCs than their nonfunctionalized counterparts. The unusual alkyl-chain-length-dependent morphology of aggregates is testified for this homological series. Amphiphiles with 12, 14, and 16 alkyl tails are characterized by the formation of micellar aggregates, while a surfactant with a decyl tail is characterized by the formation of larger aggregates with lower surface curvature. The MPI-10 aggregate morphology was rationalized in terms of the packing parameter consideration and was supported by size measurements and the fluorescence probe techniques, which showed that vesicle-like aggregates in close-packing mode probably occur. MPI-n aggregates have exhibited a high solubilization capacity toward hydrophobic azo dye Orange OT. Importantly, amphiphiles studied showed (i) high bacteriostatic activity at the level of ciprofloxacin; (ii) high bactericidal action against all Gram-positive bacteria, including methicillin-resistant strains; (iii) bactericidal properties against Gram-negative bacteria; and (iv) low hemolytic activity.

Complexes of Sodium Pectate with Nickel for Hydrogen Oxidation and Oxygen Reduction in Proton-Exchange Membrane Fuel Cells.

A number of nickel complexes of sodium pectate with varied Ni2+ content have been synthesized and characterized. The presence of the proton conductivity, the possibility of the formation of a dense spatial network of transition metals in these coordination biopolymers, and the immobilization of transition ions in the catalytic sites of this class of compounds make them promising for proton-exchange membrane fuel cells. It has been established that the catalytic system composed of a coordination biopolymer with 20% substitution of sodium ions for divalent nickel ions, Ni (20%)-NaPG, is the leading catalyst in the series of 5, 15, 20, 25, 35% substituted pectates. Among the possible reasons for the improvement in performance the larger specific surface area of this sample compared to the other studied materials and the narrowest distribution of the vertical size of metal arrays were registered. The highest activity during CV and proximity to four-electron transfer during the catalytic cycle have also been observed for this compound.

Oriented Nickel Nanonetworks and Their Submicron Fibres as a Basis for a Transparent Electrically Conductive Coating.

The paper demonstrates a technique for applying an oriented nickel network to a glass surface. The method is based on the chemical reduction of nickel salt. The shaping and orientation of the resulting system are carried out using a micellar template of a surfactant and a magnetic field. Submicron nickel fibres are used to impart unity to the plurality of individual-oriented nickel nanonetworks. The result is a single conductive coating on the surface of the glass, which has a transparency in the optical range. Investigations of the structure, chemical composition, morphology and electrical conductivity of the coating were performed.

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction.

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO2 reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO2 to CH4 in water. Stability and selectivity of conversion of CO2 to CH4 as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO2 reduction reaction (CO2RR) proceeds at -1.5 V vs. Ag/AgCl at ~10 mA/cm2 current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO2). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.

Design of N-Methyl-d-Glucamine-Based Resorcin[4]arene Nanoparticles for Enhanced Apoptosis Effects.

The addition of specific chemical groups in a macrocycle structure influences its functional properties and, consequently, can provide new possibilities, among which are aggregation properties, water solubility, biocompatibility, stimuli response, biological activity, etc. Herein, we report synthesis of new resorcin[4]arene with N-methyl-d-glucamine groups on the upper rim and n-decyl chains on the lower rim, an investigation of its self-assembly behavior in aqueous media, and its use as a building block for the formation of drug nanocontainer. N-methyl-d-glucamine fragments in the resorcin[4]arene structure promote higher stability in solutions, simplification of self-aggregation, and increased biological activity. Antimicrobial and hemolytic activity assessment revealed that this resorcin[4]arene obtained is nontoxic. The study of cell penetration was carried out with both free and encapsulated doxorubicin (DOX). Surprisingly, DOX-loaded macrocycle aggregates are more efficient in causing apoptosis in human cancer cell line. Conceivably, this knowledge will help in the rational design of DOX combination for novel drug-administration strategies in cancer treatment.

Thermally Stable Nitrothiacalixarene Chromophores: Conformational Study and Aggregation Behavior.

Achieving high thermal stability and control of supramolecular organization of functional dyes in sensors and nonlinear optics remains a demanding task. This study was aimed at the evaluation of thermal behavior and Langmuir monolayer characteristics of topologically varied nitrothiacalixarene multichromophores and phenol monomers. A nitration/azo coupling alkylation synthetic route towards partially O-substituted nitrothiacalixarenes and 4-nitrophenylazo-thiacalixarenes was proposed and realized. Nuclear magnetic resonance (NMR) spectroscopy and X-ray diffractometry of disubstituted nitrothiacalix[4]arene revealed a rare 1,2-alternate conformation. A synchronous thermal analysis indicated higher decomposition temperatures of nitrothiacalixarene macrocycles as compared with monomers. Through surface pressure/potential-molecular area measurements, nitrothiacalixarenes were shown to form Langmuir monolayers at the air-water interface and, through atomic force microscopy (AFM) technique, Langmuir-Blodgett (LB) films on solid substrates. Reflection-absorption spectroscopy of monolayers and electronic absorption spectroscopy of LB films of nitrothiacalixarenes recorded a red-shifted band (290 nm) with a transition from chloroform, indicative of solvatochromism. Additionally, shoulder band at 360 nm was attributed to aggregation and supported by gas-phase density functional theory (DFT) calculations and dynamic light scattering (DLS) analysis in chloroform-methanol solvent in the case of monoalkylated calixarene 3. Excellent thermal stability and monolayer formation of nitrothiacalixarenes suggest their potential as functional dyes.

N-Methyl-d-glucamine-Calix[4]resorcinarene Conjugates: Self-Assembly and Biological Properties.

Deep insight of the toxicity of supramolecular systems based on macrocycles is of fundamental interest because of their importance in biomedical applications. What seems to be most interesting in this perspective is the development of the macrocyclic compounds with biocompatible fragments. Here, calix[4]resorcinarene derivatives containing N-methyl- d-glucamine moieties at the upper rim and different chemical groups at the lower rim were synthesized and investigated. These macrocycles showed a tendency to self-aggregate in aqueous solution, and their self-assembly abilities depend on the structure of the lower rim. The in vitro cytotoxic and antimicrobial activity of the calix[4]resorcinarenes revealed the relationship of biological properties with the ability to aggregate. Compared to macrocycles with methyl groups on the lower rim, calix[4]resorcinarenes with sulfonate groups appear to possess very similar antibacterial properties, but over six times less hemolytic activity. In some ways, this is the first example that reveals the dependence of the observed hemolytic and antibacterial activity on the lipophilicity of the calix[4]arene structure.

Tb(III)-doped silica nanoparticles for sensing: effect of interfacial interactions on substrate-induced luminescent response.

The present work introduces the easy modification of the water-in-oil microemulsion procedure aimed at the doping of the Tb(III) complexes within core or shell zones of the silica nanoparticles (SNs), which are designated as "core-shell", "shell", and "core". The dye molecules, chelating ligands, and copper ions were applied as the quenchers of Tb(III)-centered luminescence through dynamic or/and static mechanisms. The binding of the quenchers at the silica/water interface results in the quenching of the Tb(III) complexes within SNs, which, in turn, is greatly dependent on the synthetic procedure. The luminescence of "core" SNs remains unchanged under the binding of the quenchers at the silica/water interface. The quenching through dynamic mechanism is more significant for "core-shell" and "shell" than for "core" SNs. Thus, both "core-shell" and "shell" SNs have enough percentage of the Tb(III) complexes located close to the interface for efficient quenching through the energy transfer. The quenching through the ion or ligand exchange is most efficient for "core-shell" SNs due to the greatest percentage of the Tb(III) complexes at the silica/water interface, which correlates with the used synthetic procedure. The highlighted regularities introduce the applicability of "core-shell" SNs used as silica beads for phosphatidylcholine bilayers in sensing their permeability toward the quenching ions.

New functional cyclic aminomethylphosphine ligands for the construction of catalysts for electrochemical hydrogen transformations.

Eight-membered cyclic functional bisphosphines, namely 1,5-di-aryl-3,7-di(2-pyridyl)-1,5-diaza-3,7-diphosphacyclooctanes (aryl=2-pyridyl, m-tolyl, p-tolyl, diphenylmethyl, benzyl, (R)-(+)-(α-methyl)benzyl), with 2-pyridyl substituents on the phosphorus atoms have been synthesized by condensation of 2-pyridylphosphine, formaldehyde, and the corresponding primary amine. The structures of some of these bisphosphines have been investigated by X-ray crystallography. The bisphosphines readily form neutral P,P-chelate complexes [(κ(2)-P,P-L)MCl2], cationic bis-P,P-chelate complexes [(κ(2)-P,P-L)2 M](2+), or a five-coordinate complex [(κ(2)-P,P-L)2 NiBr]Br. The electrochemical behavior of two of the nickel complexes, and their catalytic activities in electrochemical hydrogen evolution and hydrogen oxidation, including the fuel-cell test, have been studied.

Langmuir monolayers and thin films of amphifilic thiacalix[4]arenes. Properties and matrix for the immobilization of cytochrome c.

Formation and properties of Langmuir films of thiacalix[4]arene (TCA) derivatives containing N-donor groups on the lower rim (Y═O(CH2)3CN; OCH2CN; NH2; OCH2ArCN-p) in 1,3-alternate conformation on aqueous subphase and solid substrates have been studied. Only tetra-cyanopropoxy-p-tert-butylthiacalix[4]arene 1 forms a typical monomolecular layer with perpendicular orientation of the macrocycle relative to the water-air interface that is able to immobilize cytochrome c in the entire range of the surface pressure. Obtained monolayers were transferred by Langmuir-Schaefer technique onto quartz, indium-tin oxide (ITO), and silicon. It was demonstrated that protein activity is retained after immobilization on the substrate.

Doping of Transparent Electrode Based on Oriented Networks of Nickel in Poly(3,4-Ethylenedioxythiophene) Polystyrene Sulfonate Matrix with P-Toluenesulfonic Acid.

This work aimed to obtain an optically transparent electrode based on the oriented nanonetworks of nickel in poly(3,4-ethylenedioxythiophene) polystyrene sulfonate matrix. Optically transparent electrodes are used in many modern devices. Therefore, the search for new inexpensive and environmentally friendly materials for them remains an urgent task. We have previously developed a material for optically transparent electrodes based on oriented platinum nanonetworks. This technique was upgraded to obtain a cheaper option from oriented nickel networks. The study was carried out to find the optimal electrical conductivity and optical transparency values of the developed coating, and the dependence of these values on the amount of nickel used was investigated. The figure of merit (FoM) was used as a criterion for the quality of the material in terms of finding the optimal characteristics. It was shown that doping PEDOT: PSS with p-toluenesulfonic acid in the design of an optically transparent electroconductive composite coating based on oriented nickel networks in a polymer matrix is expedient. It was found that the addition of p-toluenesulfonic acid to an aqueous dispersion of PEDOT: PSS with a concentration of 0.5% led to an eight-fold decrease in the surface resistance of the resulting coating.

Carbonized Nickel Complex of Sodium Pectate as Catalyst for Proton-Exchange Membrane Fuel Cells.

Sodium pectate derivatives with 25% replacement of sodium ions with nickel ions were obtained by carbonization to temperatures of 280, 550, and 800 °C, under special protocols in an inert atmosphere by carbonization to temperatures of 280, 550, and 800 °C. The 25% substitution is the upper limit of substitution of sodium for nickel ions, above which the complexes are no longer soluble in water. It was established that the sample carburized to 550 °C is the most effective active element in the hydrogen-oxidation reaction, while the sample carbonized up to 800 °C was the most effective in the oxygen-reduction reaction. The poor performance of the catalytic system involving the pectin coordination biopolymer carbonized up to 280 °C was due to loss of proton conductivity caused by water removal and mainly by two-electron transfer in one catalytic cycle of the oxygen-reduction reaction. The improved performance of the system with coordination biopolymer carbonized up to 550 °C was due to the better access of gases to the catalytic sites and four-electron transfer in one catalytic cycle. The (Ni-NaPG)800C sample contains metallic nickel nanoparticles and loose carbon, which enhances the electrical conductivity and gas capacity of the catalytic system. In addition, almost four-electron transfer is observed in one catalytic cycle of the oxygen-reduction reaction.

Molecular and Nano-Structural Optimization of Nanoparticulate Mn2+-Hexarhenium Cluster Complexes for Optimal Balance of High T1- and T2-Weighted Contrast Ability with Low Hemoagglutination and Cytotoxicity.

The present work introduces rational design of nanoparticulate Mn(II)-based contrast agents through both variation of the µ3 (inner) ligands within a series of hexarhenium cluster complexes [{Re6(µ3-Q)8}(CN)6]4- (Re6Q8, Q = S2-, Se2- or Te2-) and interfacial decoration of the nanoparticles (NPs) K4-2xMnxRe6Q8 (x = 1.3 - 1.8) by a series of pluronics (F-68, P-123, F-127). The results highlight an impact of the ligand and pluronic for the optimal colloid behavior of the NPs allowing high colloid stability in ambient conditions and efficient phase separation under the centrifugation. It has been revealed that the K4-2xMnxRe6Se8 NPs and those decorated by F-127 are optimal from the viewpoint of magnetic relaxivities r1 and r2 (8.9 and 10.9 mM-1s-1, respectively, at 0.47 T) and low hemoagglutination activity. The insignificant leaching of Mn2+ ions from the NPs correlates with their insignificant effect on the cell viability of both M-HeLa and Chang Liver cell lines. The T1- and T2-weighted contrast ability of F-127-K4-2xMnxRe6Q8 NPs was demonstrated through the measurements of phantoms at whole body 1.5 T scanner.

Self-Assembling Metallocomplexes of the Amphiphilic 1,4-Diazabicyclo[2.2.2]octane Derivative as a Platform for the Development of Nonplatinum Anticancer Drugs.

New 1-cetyl-4-aza-1-azoniabicyclo[2.2.2]octane bromide complexes with copper(II) bromide and lanthanum(III) nitrate were characterized using dynamic light scattering and transmission electron microscopy, with self-assembly and the morphological behavior elucidated. For the lanthanum(III) nitrate complex, the 3D crystal structure was characterized using X-ray diffractometry. These metallosurfactants were tested as antitumor agents, and a high cytotoxic effect comparable with doxorubicin was revealed against the M-HeLa and A-549 cell lines. Both complexes were 2 times more active toward the MCF-7 cell line than the breast cancer drug tamoxifen. The cytotoxic mechanism of complexes is assumed to be related to the induction of apoptosis through the mitochondrial pathway.

Redox trends in terpyridine nickel complexes.

A synthesis has been developed that allows the isolation of four-coordinate [(tpy)Ni-Br] (1, tpy = terpyridine) in high yield. Complex 1 has been structurally characterized, and the X-ray data reveal a square-planar geometry, unlike the known [(tpy')Ni-I] (tpy' = 4,4',4''-tri-tert-butyl-terpyridine) but similar to [(tpy)Ni-CH(3)]. In the solid-state, EPR spectroscopy indicates, however, that unlike [(tpy)Ni-CH(3)], the electronic structure of 1 is a metal-centered, not a ligand-centered radical. Density functional theory (DFT) analyses support this assignment. The preparation of 1 also facilitated the analysis of the redox potentials of a series of terpyridine nickel derivatives. It was found that the overall ligand sphere (one vs two coordinated terpyridine ligands) plays more of a role in determining the redox potentials of these derivatives than do the formal oxidation states of the nickel ions in the solution phase.

Data of characterization of sodium pectate complexes with iron and manganese.

Data for iron and manganese-containing sodium pectate complexes are reported. Such complexes are potentially capable of exhibiting catalytic properties to the electroreduction of small molecules. Also, the complexes are water-soluble due to their ligands. The combination of these factors makes them promising for homogeneous electrocatalysis. However, in many respects, these complexes remain poorly understood. The Fourier-transform infrared spectroscopy data for the sodium pectate complexes with manganese and iron in the range of 500-4000 cm-1 were obtained. The electron spin resonance spectra of the complexes make it possible to characterize oxidation states of the metal centers in the complexes. The cyclic voltammetry data for the complexes both in an aqueous solution saturated with argon and saturated with carbon dioxide were received. For both complexes after deposition of the complexes on graphite managed to get micrographs by the atomic force microscopy method.

Cationic liposomes mediated transdermal delivery of meloxicam and ketoprofen: Optimization of the composition, in vitro and in vivo assessment of efficiency.

New liposomes modified with pyrrolidinium surfactants containing a hydroxyethyl fragment (CnPB, n = 12, 14, 16) were prepared for transdermal delivery of non-steroidal anti-inflammatory drugs. In order to obtain the optimal composition, the surfactant/lipid molar ratio (0.02/1; 0.029/1; 0.04/1) and the amphiphile hydrocarbon tail length were varied. Rhodamine B was loaded in all formulations, while meloxicam and ketoprofen in selected ones. For liposomes studied the hydrodynamic diameter was in the range of 80-130 nm, the zeta potential ranged from +35 to +50 mV, EE was 75-99%. Liposome modification leads to a prolonged release of the rhodamine B (up to 10-12 h) and faster release of non-steroidal drugs (up to 7-8 h) in vitro. The ability to cross the skin barrier using Franz cells was investigated for liposomal meloxicam and ketoprofen. The total amount of meloxicam and ketoprofen passed through the Strat-M® membranes during 51 h was 51-114 µg/cm2 and 87-105 µg/cm2 respectively. The evaluation of transdermal diffusion ex vivo showed that total amount of liposomal ketoprofen passed through the skin during 51 h was 140-162 µg/cm2. Liposomes modified with C16PB were found as the most effective inflammation reducing formulation in the carrageenan edema model of rat paw.

A Glucose-Responsive Polymer Nanocarrier Based on Sulfonated Resorcinarene for Controlled Insulin Delivery.

A nanocarrier (p(6SRA-5B)) for glucose-controlled insulin delivery consists of sulfonated resorcinarenes (SRA) that are assembled into a spherical shell and are attached to each other with phenylboronate linkers. p(6SRA-5B) is stable in water and blood plasma at normal glucose concentrations. At high glucose levels (>5 mM), p(6SRA-5B) dissociates into SRA and phenylboronates through competitive interaction with excess glucose. Insulin was successfully encapsulated into the cavity of p(6SRA-5B) and its release was investigated in water and blood plasma by NMR, UV, CD, and fluorescence spectroscopy. The results show that the dissociation of the nanocarrier and the insulin release occurs with an increase in glucose concentration. At 5 mM glucose, the nanocarrier is stable, and the insulin release does not exceed 10 %. Increasing the glucose concentration to 7.5-10 mM results in a 40-100 % insulin release. p(6SRA-5B) is thus a promising insulin nanocarrier for the treatment of type 1 diabetes.

Novel hybrid liposomal formulations based on imidazolium-containing amphiphiles for drug encapsulation.

Novel liposomes based on 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and imidazolium-containing amphiphiles with various length of hydrophobic tail at various molar ratio of components have been fabricated. Obtained formulations were characterized using dynamic and electrophoretic light scattering as well as transmission electron microscopy techniques. It has been established, that DPPC liposomes modification by these cationic amphiphiles resulted in zeta potential increase from +3 mV to +45-70 mV and improve its stability for a long time (more than 6 months, whereas unmodified liposomes have been destructed after 2 weeks of storage). Hydrodynamic diameter of prepared hybrid liposomes was in the range of 70-100 nm depending on its composition. Fabricated hybrid carriers have been used for drug (metronidazole) encapsulation. It has been shown, that superior encapsulation characteristics (encapsulation efficiency was 75%) exhibited hybrid liposomes composed from octadecyl derivative. Increase of the time of total release of encapsulated drug from hybrid liposomes in comparison with unencapsulated drug by 1.7 times has been demonstrated.