Evaluation of food waste treatment techniques using the complex q-rung orthopair fuzzy generalized TODIM method with weighted power geometric operator.

Food waste has received wide attention due to its hazardous environmental effects, such as soil, water, and air pollution. Evaluating food waste treatment techniques is imperative to realize environmental sustainability. This study proposes an integrated framework, the complex q-rung orthopair fuzzy-generalized TODIM (an acronym in Portuguese for interactive and multi-criteria decision-making) method with weighted power geometric operator, to assess the appropriate technique for food waste. The assessment of food waste treatment techniques can be divided into three phases: information processing, information fusion, and ranking alternatives. Firstly, the complex q-rung orthopair fuzzy set flexibly describes the information with periodic characteristics in the processing process with various parameters q. Then, the weighted power geometric operator is employed to calculate the weight of the expert and form the group evaluation matrix, in which the weight of each input rating depends upon the other input ratings. It can simulate the mutual support, multiplicative preferences, and interrelationship of experts. Next, the generalized TODIM method is employed to rank the food waste treatment techniques, considering experts' psychological characteristics and bounded behavior. Subsequently, a real-world application case examines the practicability of the proposed framework. Furthermore, the sensitivity analysis verifies the validity and stability of the presented framework. The comparative study highlights the effectiveness of this framework using the existing frameworks. According to the result, Anaerobic digestion (0.0043) has the highest priority among the considered alternatives, while Incineration (-0.0009) has the lowest.

Unsteady ternary hybrid-nanofluid flow over an expanding/shrinking cylinder with multiple slips: a Yamada-Ota model implementation.

The primary objective of this investigation is to examine the thermal state of an unsteady ternary hybrid-nanofluid flow over an expanding/shrinking cylinder. The influence of radiation along with a non-uniform thermal source/sink is taken into account to expedite heat distribution. Multiple slips are considered at the cylinder interface. The mathematical model is simplified by incorporating appropriate transformations. A numerical solution is obtained using the bvp4c algorithm. The flow characteristics and behavior of the trihybrid nanoliquid exhibit significant changes when the cylinder expands or contracts. The effects of various emerging parameters are analyzed using graphical representations. The velocity field shows an opposite trend when the unsteadiness and mass transfer parameters are increased. The thermal field improves with higher values of the non-uniform source/sink parameter but deteriorates with an increase in the thermal slip parameter. The drag force increases with higher values of the unsteadiness parameter, while it decreases with amplified values of the mass suction and velocity slip parameters. A strong correlation is observed with previous studies which validates and strengthens the credibility of the present analysis.

Combined impacts of low oscillating magnetic field and Shliomis theory on mono and hybrid nanofluid flows with nonlinear thermal radiation.

Hybrid nanofluids have become a popular choice for various engineering and industrial applications due to their advanced properties. This study focuses on investigating the consequences of a low oscillating magnetic field on the flow of unsteady mono and hybrid nanofluids over a vertically moving permeable disk. Initially, iron oxide nanoparticles are mixed with water to create a mono nanofluid, which is later transformed into a hybrid nanofluid by adding cobalt nanoparticles. The shape of nanoparticles used is brick-shaped, and an external magnetic field is applied to regulate the flow and heat transfer mechanism using ferromagnetic nanoparticles. Additionally, the nonlinear thermal radiative heat flux is considered for the heat transfer phenomenon. The momentum and rotational motion of the magnetic fluid caused by the rotating disk are formulated using the Shliomis fundamental concept. The numerical analysis of the ordinary differential equations (ODEs) is carried out using the bvp4c technique, and the results are presented in tabular form for the surface drag coefficient and heat transmission at the walls. Moreover, the temperature and velocity distributions are illustrated using graphical representations against relevant parameters. The findings highlight that for a constant negative value for the magnetization parameterϒ<0,the heat transfer rate for hybrid nanofluid is witnessed stronger at a volume fractionϕhnf=0.120,whereas a minimal heat transfer rate is observed for positive values of magnetization parameterϒ>0at the same value of volume fraction.

Identification of novel inhibitor against human phosphoethanolamine cytidylyltransferase from phytochemicals of Citrus sinensis peel extract by in vitro and in silico approach.

Kidney stone is a major global menace that demands research on nonsurgical treatment involving biological compounds for the benefit of the patients. Among the biological extracts, citric acid is traditionally used to dissolve kidney stones. The current research focuses on evaluating the in vitro anti-urolithiatic activity and in silico study of ethanolic extract of Citrus sinensis (ECS) peel against c: phosphoethanolamine cytidylyltransferase (PCYT). The diuretic activity was evaluated using in vitro model against the synthesized calcium oxalate crystals and cytotoxicity study in Madin-Darby canine kidney cell lines. The phytochemicals were identified using gas chromatography-mass spectroscopy. The interaction mechanism was studied using computational docking studies to confirm their involvement in the dissolution of calcium oxalate kidney stones. Further molecular properties, drug-likeness, ADME (absorption, distribution, metabolism, and excretion), and toxicity analysis were followed for the ligands using software tools. 5-Hydroxymethylfurfural, 2,4-di-tert-butylphenol, 2-methoxy-4-vinylphenol, 6-octen-1-ol, 3,7-dimethyl-, acetate (citronellyl acetate), 3',5'-dimethoxyacetophenone, and ethyl alpha-d-glucopyranoside showed good binding affinities against PCYT. Moreover, the docking studies showed the ligand 3',5'-dimethoxyacetophenone has the highest binding energy (-6.68 kcal/mol) for human CTP. The present investigation concludes that these compounds of C. sinensis peel extract compounds are responsible as novel inhibitors against human CTP and extend their use in the pharmaceutical drug development process.

Time series forecasting of COVID-19 transmission in Asia Pacific countries using deep neural networks.

The novel human coronavirus disease COVID-19 has become the fifth documented pandemic since the 1918 flu pandemic. COVID-19 was first reported in Wuhan, China, and subsequently spread worldwide. Almost all of the countries of the world are facing this natural challenge. We present forecasting models to estimate and predict COVID-19 outbreak in Asia Pacific countries, particularly Pakistan, Afghanistan, India, and Bangladesh. We have utilized the latest deep learning techniques such as Long Short Term Memory networks (LSTM), Recurrent Neural Network (RNN), and Gated Recurrent Units (GRU) to quantify the intensity of pandemic for the near future. We consider the time variable and data non-linearity when employing neural networks. Each model's salient features have been evaluated to foresee the number of COVID-19 cases in the next 10 days. The forecasting performance of employed deep learning models shown up to July 01, 2020, is more than 90% accurate, which shows the reliability of the proposed study. We hope that the present comparative analysis will provide an accurate picture of pandemic spread to the government officials so that they can take appropriate mitigation measures.

Framework to Detect Schizophrenia in Brain MRI Slices with Mayfly Algorithm-Selected Deep and Handcrafted Features.

Brain abnormality causes severe human problems, and thorough screening is necessary to identify the disease. In clinics, bio-image-supported brain abnormality screening is employed mainly because of its investigative accuracy compared with bio-signal (EEG)-based practice. This research aims to develop a reliable disease screening framework for the automatic identification of schizophrenia (SCZ) conditions from brain MRI slices. This scheme consists following phases: (i) MRI slices collection and pre-processing, (ii) implementation of VGG16 to extract deep features (DF), (iii) collection of handcrafted features (HF), (iv) mayfly algorithm-supported optimal feature selection, (v) serial feature concatenation, and (vi) binary classifier execution and validation. The performance of the proposed scheme was independently tested with DF, HF, and concatenated features (DF+HF), and the achieved outcome of this study verifies that the schizophrenia screening accuracy with DF+HF is superior compared with other methods. During this work, 40 patients' brain MRI images (20 controlled and 20 SCZ class) were considered for the investigation, and the following accuracies were achieved: DF provided >91%, HF obtained >85%, and DF+HF achieved >95%. Therefore, this framework is clinically significant, and in the future, it can be used to inspect actual patients' brain MRI slices.

χ2-BidLSTM: A Feature Driven Intrusion Detection System Based on χ2 Statistical Model and Bidirectional LSTM.

In a network architecture, an intrusion detection system (IDS) is one of the most commonly used approaches to secure the integrity and availability of critical assets in protected systems. Many existing network intrusion detection systems (NIDS) utilize stand-alone classifier models to classify network traffic as an attack or as normal. Due to the vast data volume, these stand-alone models struggle to reach higher intrusion detection rates with low false alarm rates( FAR). Additionally, irrelevant features in datasets can also increase the running time required to develop a model. However, data can be reduced effectively to an optimal feature set without information loss by employing a dimensionality reduction method, which a classification model then uses for accurate predictions of the various network intrusions. In this study, we propose a novel feature-driven intrusion detection system, namely χ2-BidLSTM, that integrates a χ2 statistical model and bidirectional long short-term memory (BidLSTM). The NSL-KDD dataset is used to train and evaluate the proposed approach. In the first phase, the χ2-BidLSTM system uses a χ2 model to rank all the features, then searches an optimal subset using a forward best search algorithm. In next phase, the optimal set is fed to the BidLSTM model for classification purposes. The experimental results indicate that our proposed χ2-BidLSTM approach achieves a detection accuracy of 95.62% and an F-score of 95.65%, with a low FAR of 2.11% on NSL-KDDTest+. Furthermore, our model obtains an accuracy of 89.55%, an F-score of 89.77%, and an FAR of 2.71% on NSL-KDDTest-21, indicating the superiority of the proposed approach over the standard LSTM method and other existing feature-selection-based NIDS methods.

A Long Short-Term Memory Biomarker-Based Prediction Framework for Alzheimer's Disease.

The early prediction of Alzheimer's disease (AD) can be vital for the endurance of patients and establishes as an accommodating and facilitative factor for specialists. The proposed work presents a robotized predictive structure, dependent on machine learning (ML) methods for the forecast of AD. Neuropsychological measures (NM) and magnetic resonance imaging (MRI) biomarkers are deduced and passed on to a recurrent neural network (RNN). In the RNN, we have used long short-term memory (LSTM), and the proposed model will predict the biomarkers (feature vectors) of patients after 6, 12, 21 18, 24, and 36 months. These predicted biomarkers will go through fully connected neural network layers. The NN layers will then predict whether these RNN-predicted biomarkers belong to an AD patient or a patient with a mild cognitive impairment (MCI). The developed methodology has been tried on an openly available informational dataset (ADNI) and accomplished an accuracy of 88.24%, which is superior to the next-best available algorithms.

EEG Channel Selection Based User Identification via Improved Flower Pollination Algorithm.

The electroencephalogram (EEG) introduced a massive potential for user identification. Several studies have shown that EEG provides unique features in addition to typical strength for spoofing attacks. EEG provides a graphic recording of the brain's electrical activity that electrodes can capture on the scalp at different places. However, selecting which electrodes should be used is a challenging task. Such a subject is formulated as an electrode selection task that is tackled by optimization methods. In this work, a new approach to select the most representative electrodes is introduced. The proposed algorithm is a hybrid version of the Flower Pollination Algorithm and ß-Hill Climbing optimizer called FPAß-hc. The performance of the FPAß-hc algorithm is evaluated using a standard EEG motor imagery dataset. The experimental results show that the FPAß-hc can utilize less than half of the electrode numbers, achieving more accurate results than seven other methods.

Novel framework of GIS based automated monitoring process on environmental biodegradability and risk analysis using Internet of Things.

A proper method on real-time monitoring of organic biomass degradation and its evaluation for safeguarding the ecosystem is the need of the hour. The work process designed in this study is to demarcate the anaerobic digestion potential using kinetic modelling and web GIS application methods. Wastewater source that causes pollution are identified through satellite maps such as solid earth, drain system, surface of earth structure, land filling and land use. The grabbed data are utilized for identifying the concentration of sludge availability. Based on literature resource multi influencing factor techniques are introduced along with overlay method to differentiate digestion potential of sludge source. This study optimizes the biodegradation potential of domestic sewage at different sludge concentrations in a pilot model operated with the samples identified through topographical drainage survey. The materialization of devices is using the Internet of Things (IoTs), that is pragmatic to be the promising tendency. Kinetic study, methanogenic assay test are performed with three different cation binding agents to find its solubilization potential and methane evolution, which is further subjected to digestion potential in anaerobic conditions for possible application in the field of environmental science. Risk analysis reveals that land filling method will have highest impact on maintaining sustainable environment. The results outcome on natural biodegradation may be used for individual house hold wastewater management for the locality.

Early Detection and Classification of Tomato Leaf Disease Using High-Performance Deep Neural Network.

Tomato is one of the most essential and consumable crops in the world. Tomatoes differ in quantity depending on how they are fertilized. Leaf disease is the primary factor impacting the amount and quality of crop yield. As a result, it is critical to diagnose and classify these disorders appropriately. Different kinds of diseases influence the production of tomatoes. Earlier identification of these diseases would reduce the disease's effect on tomato plants and enhance good crop yield. Different innovative ways of identifying and classifying certain diseases have been used extensively. The motive of work is to support farmers in identifying early-stage diseases accurately and informing them about these diseases. The Convolutional Neural Network (CNN) is used to effectively define and classify tomato diseases. Google Colab is used to conduct the complete experiment with a dataset containing 3000 images of tomato leaves affected by nine different diseases and a healthy leaf. The complete process is described: Firstly, the input images are preprocessed, and the targeted area of images are segmented from the original images. Secondly, the images are further processed with varying hyper-parameters of the CNN model. Finally, CNN extracts other characteristics from pictures like colors, texture, and edges, etc. The findings demonstrate that the proposed model predictions are 98.49% accurate.

Human Gait Recognition: A Single Stream Optimal Deep Learning Features Fusion.

Human Gait Recognition (HGR) is a biometric technique that has been utilized for security purposes for the last decade. The performance of gait recognition can be influenced by various factors such as wearing clothes, carrying a bag, and the walking surfaces. Furthermore, identification from differing views is a significant difficulty in HGR. Many techniques have been introduced in the literature for HGR using conventional and deep learning techniques. However, the traditional methods are not suitable for large datasets. Therefore, a new framework is proposed for human gait recognition using deep learning and best feature selection. The proposed framework includes data augmentation, feature extraction, feature selection, feature fusion, and classification. In the augmentation step, three flip operations were used. In the feature extraction step, two pre-trained models were employed, Inception-ResNet-V2 and NASNet Mobile. Both models were fine-tuned and trained using transfer learning on the CASIA B gait dataset. The features of the selected deep models were optimized using a modified three-step whale optimization algorithm and the best features were chosen. The selected best features were fused using the modified mean absolute deviation extended serial fusion (MDeSF) approach. Then, the final classification was performed using several classification algorithms. The experimental process was conducted on the entire CASIA B dataset and achieved an average accuracy of 89.0. Comparison with existing techniques showed an improvement in accuracy, recall rate, and computational time.

Smart-Contract Aware Ethereum and Client-Fog-Cloud Healthcare System.

The Internet of Medical Things (IoMT) is increasingly being used for healthcare purposes. IoMT enables many sensors to collect patient data from various locations and send it to a distributed hospital for further study. IoMT provides patients with a variety of paid programmes to help them keep track of their health problems. However, the current system services are expensive, and offloaded data in the healthcare network are insecure. The research develops a new, cost-effective and stable IoMT framework based on a blockchain-enabled fog cloud. The study aims to reduce the cost of healthcare application services as they are processing in the system. The study devises an IoMT system based on different algorithm techniques, such as Blockchain-Enable Smart-Contract Cost-Efficient Scheduling Algorithm Framework (BECSAF) schemes. Smart-Contract Blockchain schemes ensure data consistency and validation with symmetric cryptography. However, due to the different workflow tasks scheduled on other nodes, the heterogeneous, earliest finish, time-based scheduling deals with execution under their deadlines. Simulation results show that the proposed algorithm schemes outperform all existing baseline approaches in terms of the implementation of applications.

An Efficient DenseNet-Based Deep Learning Model for Malware Detection.

Recently, there has been a huge rise in malware growth, which creates a significant security threat to organizations and individuals. Despite the incessant efforts of cybersecurity research to defend against malware threats, malware developers discover new ways to evade these defense techniques. Traditional static and dynamic analysis methods are ineffective in identifying new malware and pose high overhead in terms of memory and time. Typical machine learning approaches that train a classifier based on handcrafted features are also not sufficiently potent against these evasive techniques and require more efforts due to feature-engineering. Recent malware detectors indicate performance degradation due to class imbalance in malware datasets. To resolve these challenges, this work adopts a visualization-based method, where malware binaries are depicted as two-dimensional images and classified by a deep learning model. We propose an efficient malware detection system based on deep learning. The system uses a reweighted class-balanced loss function in the final classification layer of the DenseNet model to achieve significant performance improvements in classifying malware by handling imbalanced data issues. Comprehensive experiments performed on four benchmark malware datasets show that the proposed approach can detect new malware samples with higher accuracy (98.23% for the Malimg dataset, 98.46% for the BIG 2015 dataset, 98.21% for the MaleVis dataset, and 89.48% for the unseen Malicia dataset) and reduced false-positive rates when compared with conventional malware mitigation techniques while maintaining low computational time. The proposed malware detection solution is also reliable and effective against obfuscation attacks.

Prediction of COVID-19 - Pneumonia based on Selected Deep Features and One Class Kernel Extreme Learning Machine.

In this work, we propose a deep learning framework for the classification of COVID-19 pneumonia infection from normal chest CT scans. In this regard, a 15-layered convolutional neural network architecture is developed which extracts deep features from the selected image samples - collected from the Radiopeadia. Deep features are collected from two different layers, global average pool and fully connected layers, which are later combined using the max-layer detail (MLD) approach. Subsequently, a Correntropy technique is embedded in the main design to select the most discriminant features from the pool of features. One-class kernel extreme learning machine classifier is utilized for the final classification to achieving an average accuracy of 95.1%, and the sensitivity, specificity & precision rate of 95.1%, 95%, & 94% respectively. To further verify our claims, detailed statistical analyses based on standard error mean (SEM) is also provided, which proves the effectiveness of our proposed prediction design.

Radiative MHD Nanofluid Flow over a Moving Thin Needle with Entropy Generation in a Porous Medium with Dust Particles and Hall Current.

This paper investigated the behavior of the two-dimensional magnetohydrodynamics (MHD) nanofluid flow of water-based suspended carbon nanotubes (CNTs) with entropy generation and nonlinear thermal radiation in a Darcy-Forchheimer porous medium over a moving horizontal thin needle. The study also incorporated the effects of Hall current, magnetohydrodynamics, and viscous dissipation on dust particles. The said flow model was described using high order partial differential equations. An appropriate set of transformations was used to reduce the order of these equations. The reduced system was then solved by using a MATLAB tool bvp4c. The results obtained were compared with the existing literature, and excellent harmony was achieved in this regard. The results were presented using graphs and tables with coherent discussion. It was comprehended that Hall current parameter intensified the velocity profiles for both CNTs. Furthermore, it was perceived that the Bejan number boosted for higher values of Darcy-Forchheimer number.

Effects of Chemical Species and Nonlinear Thermal Radiation with 3D Maxwell Nanofluid Flow with Double Stratification-An Analytical Solution.

This article elucidates the magnetohydrodynamic 3D Maxwell nanofluid flow with heat absorption/generation effects. The impact of the nonlinear thermal radiation with a chemical reaction is also an added feature of the presented model. The phenomenon of flow is supported by thermal and concentration stratified boundary conditions. The boundary layer set of non-linear PDEs (partial differential equation) are converted into ODEs (ordinary differential equation) with high nonlinearity via suitable transformations. The homotopy analysis technique is engaged to regulate the mathematical analysis. The obtained results for concentration, temperature and velocity profiles are analyzed graphically for various admissible parameters. A comparative statement with an already published article in limiting case is also added to corroborate our presented model. An excellent harmony in this regard is obtained. The impact of the Nusselt number for distinct parameters is also explored and discussed. It is found that the impacts of Brownian motion on the concentration and temperature distributions are opposite. It is also comprehended that the thermally stratified parameter decreases the fluid temperature.

An Image Encryption Scheme Based on Block Scrambling, Modified Zigzag Transformation and Key Generation Using Enhanced Logistic-Tent Map.

Nowadays, the images are transferred through open channels that are subject to potential attacks, so the exchange of image data requires additional security in many fields, such as medical, military, banking, etc. The security factors are essential in preventing the system from brute force and differential attacks. We propose an Enhanced Logistic Map (ELM) while using chaotic maps and simple encryption techniques, such as block scrambling, modified zigzag transformation for encryption phases, including permutation, diffusion, and key stream generation to withstand the attacks. The results of encryption are evaluated while using the histogram, correlation analysis, Number of Pixel Change Rate (NPCR), Unified Average Change Intensity (UACI), Peak-Signal-to-Noise Ratio (PSNR), and entropy. Our results demonstrate the security, reliability, efficiency, and flexibility of the proposed method.

Clinically acquired new challenging dataset for brain SOL segmentation: AJBDS-2023.

Space-occupying lesions (SOL) brain detected on brain MRI are benign and malignant tumors. Several brain tumor segmentation algorithms have been developed but there is a need for a clinically acquired dataset that is used for real-time images. This research is done to facilitate reporting of MRI done for brain tumor detection by incorporating computer-aided detection. Another objective was to make reporting unbiased by decreasing inter-observer errors and expediting daily reporting sessions to decrease radiologists' workload. This is an experimental study. The proposed dataset contains clinically acquired multiplanar, multi-sequential MRI slices (MPMSI) which are used as input to the segmentation model without any preprocessing. The proposed AJBDS-2023 consists of 10667 images of real patients imaging data with a size of 320*320*3. Acquired images have T1W, TW2, Flair, T1W contrast, ADC, and DWI sequences. Pixel-based ground-truth annotated images of the tumor core and edema of 6334 slices are made manually under the supervision of a radiologist. Quantitative assessment of AJBDS-2023 images is done by a novel U-network on 4333 MRI slices. The diagnostic accuracy of our algorithm U-Net trained on AJBDS-2023 was 77.4 precision, 82.3 DSC, 87.4 specificity, 93.8 sensitivity, and 90.4 confidence interval. An experimental analysis of AJBDS-2023 done by the U-Net segmentation model proves that the proposed AJBDS-2023 dataset has images without preprocessing, which is more challenging and provides a more realistic platform for evaluation and analysis of newly developed algorithms in this domain and helps radiologists in MRI brain reporting more realistically.

Fuzzy ensemble of fined tuned BERT models for domain-specific sentiment analysis of software engineering dataset.

Software engineers post their opinions about various topics on social media that can be collectively mined using Sentiment Analysis. Analyzing this opinion is useful because it can provide insight into developers' feedback about various tools and topics. General-purpose sentiment analysis tools do not work well in the software domain because most of these tools are trained on movies and review datasets. Therefore, efforts are underway to develop domain-specific sentiment analysis tools for the Software Engineering (SE) domain. However, existing domain-specific tools for SE struggle to compute negative and neutral sentiments and can not be used on all SE datasets. This work uses a hybrid technique based on deep learning and a fine-tuned BERT model, i.e., Bert-Base, Bert-Large, Bert-LSTM, Bert-GRU, and Bert-CNN presented that is adapted as a domain-specific sentiment analysis tool for Community Question Answering datasets (named as Fuzzy Ensemble). Five different variants of fine-tuned BERT on the SE dataset are developed, and an ensemble of these fine-tuned models is taken using fuzzy logic. The trained model is evaluated on four publicly available benchmark datasets, i.e., Stack Overflow, JavaLib, Jira, and Code Review, using various evaluation metrics. The fuzzy Ensemble model is also compared with the state-of-the-art sentiment analysis tools for the software engineering domain, i.e., SentiStrength-SE, Senti4SD, SentiCR, and Generative Pre-Training Transformer (GPT). GPT mode is fine-tuned by the authors for domain-specific sentiment analysis. The Fuzzy Ensemble model covers the limitation of existing tools and improve accuracy to predict neutral sentiments even on diverse dataset. The fuzzy Ensemble model performs superior to state-of-the-art tools by achieving a maximum F1-score of 0.883.