RESUMEN
In this study, an advanced oxidation process with E/Ce(IV) synergistic PMS (E/Ce(IV)/PMS) was established for the efficient removal of Reactive Blue 19 (RB19). The catalytic oxidation performance of different coupling systems was examined and the synergistic effect of E/Ce(IV) with PMS in the system was substantiated. The oxidative removal of RB19 in E/Ce(IV)/PMS was excellent, achieving a removal efficiency of 94.47% and a reasonable power consumption (EE/O value was 3.27 kWh·m-3). The effect of pH, current density, Ce(IV) concentration, PMS concentration, initial RB19 concentration and water matrix on the removal efficiency of RB19 were explored. Additionally, quenching and EPR experiments showed that the solution contains different radicals such as SO4·-, HOâ and 1O2, where 1O2 and SO4·- played key roles, but HOâ just acted a weaker role. Ce ion trapping experiment confirmed that Ce(IV) was involved in the reaction process and played a major role (29.91%). RB19 was subject to three possible degradation pathways, and the intermediate products displayed well biochemical properties. To conclude, the degradation mechanism of RB19 was explored and discussed. In the presence of current, E/Ce(IV)/PMS performed a rapid Ce(IV)/Ce(III) cycle, continuously generating strong catalytic oxidation Ce(IV), The reactive radicals derived from the decomposition of PMS, in conjunction with Ce(IV) and direct electro-oxidation, efficiently destroyed the molecular structure of RB19 and showed an efficient removal rate.
Asunto(s)
Antraquinonas , Peróxidos , Peróxidos/química , Oxidación-Reducción , AguaRESUMEN
In this work, a metal-organic framework/graphene oxide (MOF(ZIF-8)/GO) nanocomposite was utilized for the electroanalysis of trace level of Cd(II) after modification of a cheap graphite rod electrode (GRE). After closed circuit process on the modified electrode, the differential pulse anodic stripping voltammetry (DPASV) technique was used for measuring of Cd(II). In optimal conditions, the sensor showed a linear dependence of current with concentration range 0.1-30 ppb for Cd(II). Moreover, limit of detection 0.03 ppb were obtained. Besides good selectivity, the sensor also indicated good reproducibility (below 5%). Moreover, the sensor showed satisfactory sensing performance in river, dam and wastewater samples with recovery ranging from 97.2% to 102.4%. Additionally, possible interfering cations were examined, but no significant interference was found. For the detection of trace Cd(II) in real matrices, this sensor illustrated other good merits like high stability, rapidity and simplicity.