RESUMEN
Mid-infrared hyperspectral imaging has in the past decade emerged as a promising tool for medical diagnostics. In this work, nonlinear frequency upconversion based hyperspectral imaging in the 6 to 8 µm spectral range is presented for the first time, using both broadband globar and narrowband quantum cascade laser illumination. AgGaS2 is used as the nonlinear medium for sum frequency generation using a 1064 nm mixing laser. Angular scanning of the nonlinear crystal provides broad spectral coverage at every spatial position in the image. This study demonstrates the retrieval of series of monochromatic images acquired by a silicon based CCD camera, using both broadband and narrowband illumination and a comparison is made between the two illumination sources for hyperspectral imaging.
RESUMEN
A gas sensor integrating a pulsed external-cavity quantum-cascade laser and a photoacoustic (PA) cell placed inside the laser cavity is described. The laser design allows a continuously tunable and mode-hop-free operation with an estimated instrument-limited linewidth of 0.063 cm-1 in Littrow or Littman-Metcalf cavity configurations. Due to higher intracavity power levels, the PA signal for the cell located within the laser cavity is 80-320 times stronger than the signal for the same cell placed outside the cavity. The sensor shows a good capability to identify individual absorption lines of isotopic H2O16, H2O8, and H2O17 species within a narrow spectral interval from 1814 to 1821 cm-1 at natural isotope abundances.
RESUMEN
A passively alignment-stabilized external cavity quantum cascade laser (EC-QCL) employing a "cat's eye"-type retroreflector and an ultra-narrowband transmissive interference filter for wavelength selection is demonstrated and experimentally investigated. Compared with conventional grating-tuned ECQCLs, the setup is nearly two orders of magnitude more stable against misalignment of the components, and spectral fluctuation is reduced by one order of magnitude, allowing for a simultaneously lightweight and fail-safe construction, suitable for applications outdoors and in space. It also allows for a substantially greater level of miniaturization and cost reduction. These advantages fit in well with the general properties of modern QCLs in the promise to deliver useful and affordable mid-infrared-light sources for a variety of spectroscopic and imaging applications.
RESUMEN
The complex refractive index components, n and k, have been studied for thin films of several common dielectric materials with a low to medium refractive index as functions of wavelength and stoichiometry for mid-infrared (MIR) wavelengths within the range 1.54-14.29 µm (700-6500 cm(-1)). The materials silicon oxide, silicon nitride, aluminum oxide, aluminum nitride, and titanium oxide are prepared using room temperature reactive sputter deposition and are characterized using MIR variable angle spectroscopic ellipsometry. The investigation shows how sensitive the refractive index functions are to the O2 and N2 flow rates, and for which growth conditions the materials deposit homogeneously. It also allows conclusions to be drawn on the degree of amorphousness and roughness. To facilitate comparison of the materials deposited in this work with others, the index of refraction was also determined and provided for the near-IR and visible ranges of the spectrum. The results presented here should serve as a useful information base for designing optical coatings for the MIR part of the electromagnetic spectrum. The results are parameterized to allow them to be easily used for coating design.