Development of A Micro-CT Scanner with Dual-Energy Option and Endovascular Contrast Agent Administration Protocol for Fetal and Neonatal Virtual Autopsy.

The rate of parental consent for fetal and perinatal autopsy is decreasing, whereas parents are more likely to agree to virtual autopsy by non-invasive imaging methods. Fetal and perinatal virtual autopsy needs high-resolution and good soft-tissue contrast for investigation of the cause of death and underlying trauma or pathology in fetuses and stillborn infants. This is offered by micro-computed tomography (CT), as opposed to the limited resolution provided by clinical CT scanners, and this is one of the most promising tools for non-invasive perinatal postmortem imaging. We developed and optimized a micro-CT scanner with a dual-energy imaging option. It is dedicated to post-mortem CT angiography and virtual autopsy of fetuses and stillborn infants in that the chamber can be cooled down to around 5 °C; this increases tissue rigidity and slows decomposition of the native specimen. This, together with the dedicated gantry-based architecture, attempts to reduce potential motion artifacts. The developed methodology is based on prior endovascular injection of a BaSO4-based contrast agent. We explain the design choices and considerations for this scanner prototype. We give details of the treatment of the optimization of the dual-energy and virtual mono-energetic imaging option that has been based on minimizing noise propagation and maximizing the contrast-to-noise ratio for vascular features. We demonstrate the scanner capabilities with proof-of-concept experiments on phantoms and stillborn piglets.

Quantitative measures of bone shape, cartilage morphometry and joint alignment are associated with disease in an ACLT and MMx rat model of osteoarthritis.

Multi-scale, subject-specific quantitative methods to characterize and monitor osteoarthritis in animal models and therapeutic treatments could help reveal causal relationships in disease development and distinguish treatment strategies. In this work, we demonstrate a reproducible and sensitive quantitative image analysis to characterize bone, cartilage and joint measures describing a rat model of post-traumatic osteoarthritis. Eleven 3-month-old male Wistar rats underwent medial anterior cruciate ligament (ACL) transection and medial meniscectomy on the right knee to destabilise the right tibiofemoral joint. They were sacrificed 6 weeks post-surgery and a silicon-based micro-bead contrast agent was injected in the joint space, before scanning with micro-computed tomography (microCT). Subsequently, 3D quantitative morphometric analysis (QMA), previously developed for rabbit joints, was performed. This included cartilage, subchondral cortical and epiphyseal bone measures, as well as novel tibiofemoral joint metrics. Semi-quantitative evaluation was performed on matching two-dimensional (2D) histology and microCT images. Reproducibility of the QMA was tested on eleven age-matched additional joints. The results indicate the QMA method is accurate and reproducible and that microCT-derived cartilage measurements are valid for the analysis of rat joints. The pathologic changes caused by transection of the ACL and medial meniscectomy were reflected in measurements of bone shape, cartilage morphology, and joint alignment. Furthermore, we were able to identify model-specific predictive parameters based on morphometric parameters measured with the QMA.

Implementation and application of a Monte Carlo model for an in vivo micro computed tomography system.

Micro computed tomography (µCT) scanners are used to create high-resolution images and to quantify properties of the scanned objects. While modern µCT scanners benefit from the cone beam geometry, they are compromised by scatter radiation. This work aims to develop a Monte Carlo (MC) model of a µCT scanner in order to characterize the scatter radiation in the detector plane. The EGS++ framework with the MC code EGSnrc was used to simulate the particle transport through the main components of the XtremeCT (SCANCO Medical AG, Switzerland). The developed MC model was based on specific information of the manufacturer and was validated against measurements. The primary and the scatter radiation were analyzed and by implementing a dedicated tracing method, the scatter radiation was subdivided into different scatter components. The comparisons of measured and simulated transmission values for different absorber and filter combinations result in a mean difference of 0.2% ±â€¯1.4%, with a maximal local difference of 3.4%. The reconstructed image of the phantom based on measurements agrees well with the image reconstructed using the MC model. The local contribution of scattered radiation is up to 10% of the total radiation in the detector plane and most of the scattered particles result from interactions in the scanned object. The MC simulations show that scatter radiation contains information about the structure of the object. In conclusion, a MC model for a µCT scanner was successfully validated and applied to analyze the characteristics of the scatter radiation for a µCT scanner.

Three-Dimensional Quantitative Morphometric Analysis (QMA) for In Situ Joint and Tissue Assessment of Osteoarthritis in a Preclinical Rabbit Disease Model.

This work utilises advances in multi-tissue imaging, and incorporates new metrics which define in situ joint changes and individual tissue changes in osteoarthritis (OA). The aims are to (1) demonstrate a protocol for processing intact animal joints for microCT to visualise relevant joint, bone and cartilage structures for understanding OA in a preclinical rabbit model, and (2) introduce a comprehensive three-dimensional (3D) quantitative morphometric analysis (QMA), including an assessment of reproducibility. Sixteen rabbit joints with and without transection of the anterior cruciate ligament were scanned with microCT and contrast agents, and processed for histology. Semi-quantitative evaluation was performed on matching two-dimensional (2D) histology and microCT images. Subsequently, 3D QMA was performed; including measures of cartilage, subchondral cortical and epiphyseal bone, and novel tibio-femoral joint metrics. Reproducibility of the QMA was tested on seven additional joints. A significant correlation was observed in cartilage thickness from matching histology-microCT pairs. The lateral compartment of operated joints had larger joint space width, thicker femoral cartilage and reduced bone volume, while osteophytes could be detected quantitatively. Measures between the in situ tibia and femur indicated an altered loading scenario. High measurement reproducibility was observed for all new parameters; with ICC ranging from 0.754 to 0.998. In conclusion, this study provides a novel 3D QMA to quantify macro and micro tissue measures in the joint of a rabbit OA model. New metrics were established consisting of: an angle to quantitatively measure osteophytes (σ), an angle to indicate erosion between the lateral and medial femoral condyles (ρ), a vector defining altered angulation (λ, α, ß, γ) and a twist angle (τ) measuring instability and tissue degeneration between the femur and tibia, a length measure of joint space width (JSW), and a slope and intercept (m, Χ) of joint contact to demonstrate altered loading with disease progression, as well as traditional bone and cartilage and histo-morphometry measures. We demonstrate correlation of microCT and histology, sensitive discrimination of OA change and robust reproducibility.

Microcomputed tomographic analysis of the peri-implant bone.

A recently developed technology allows evaluation of bone biopsies with 3-D microcomputed tomography (microCT). The present study evaluated the feasibility of application of microCT to the analysis of peri-implant bone tissues. A human bone biopsy containing a titanium screw was analyzed using a microCT scan. The parameters computed by the microCT were bone volume, bone surface, trabecular thickness, trabecular separation, and bone connectivity. Also, the bone-to-implant apposition was measured, and all results were compared with those obtained with standard histomorphometry of the same biopsy. The results of the present study suggest that microCT enables 3-D nondestructive evaluation of bone biopsies containing endosseous titanium implants, also allowing analysis of the bone-implant interface. Measurements of bone-to-implant apposition obtained by microCT were similar to those obtained with standard undecalcified histology.

High-resolution pQCT analysis at the distal radius and tibia discriminates patients with recent wrist and femoral neck fractures.

We depict a fragility bone state in two primitive osteoporosis populations using 3D high-resolution peripheral in vivo QCT (HR-pQCT). Postmenopausal women (C, controls, n = 54; WF, wrist, n = 50; HF, hip, n = 62 recent fractured patients) were analyzed for lumbar and hip DXA areal BMD (aBMD), cancellous and cortical volumetric BMD (vBMD), and microstructural and geometric parameters on tibia and radius by HR-pQCT. Principal component analysis (PCA) allowed extracting factors that best represent bone variables. Comparison between groups was made by analysis of covariance (ANCOVA). Two factors (>80% of the entire variability) are extracted by PCA: at the radius, the first is a combination of trabecular parameters and the second of cortical parameters. At the tibia, we found the reverse. Femoral neck aBMD is decreased in WF (8.6%) and in HF (18%) groups (no lumbar difference). WF showed a approximately 20% reduction in radius trabecular vBMD and number. Radius cortical vBMD and thickness decrease by 6% and 14%, respectively. At the tibia, only the cortical compartment is affected, with approximately 20% reduction in bone area, thickness, and section modulus and 6% reduction in vBMD. HF showed same radius trabecular alterations than WF, but radius cortical parameters are more severely affected than WF with reduced bone area (25%), thickness (28.5%), and vBMD (11%). At the tibia, trabecular vBMD and number decrease by 26% and 17.5%, respectively. Tibia cortical bone area, thickness, and section modulus showed a >30% decrease, whereas vBMD reduction reached 13%. Geometry parameters at the tibia displayed the greatest differences between healthy and fractured patients and between wrist and hip fractures.

High-dose bisphosphonate therapy in an urgent case of spontaneous multiple vertebral fractures in a 55 year old woman.

An early postmenopausal Caucasian woman aged 55 sustained multiple vertebral fractures after a minor trauma. After exclusion of any kind of secondary osteoporosis, we administered due to clinical severity combined oral and cyclic intravenous bisphosphonate therapy (oral risedronate 35 mg/week, i.v. pamidronate 30 mg quarterly) with adequate calcium and vitamin D supplementation for 28 months. We performed a transiliac bone biopsy at baseline and at month 28. The paired samples were investigated by histomorphometry, by microCT-analysis for 3d structure and by qBEI representing bone mineral density distribution. Mineralisation of the bone matrix was not influenced by supplementation of calcium and vitamin D. Parameters of bone architecture and BMD improved; and a reduction of pain and increased mobility was observed. No further osteoporotic fractures occurred during the time of investigation.

The effect of cementing technique on structural fixation of pegged glenoid components in total shoulder arthroplasty.

Although loosening of cemented glenoid components is one of the major complications of total shoulder arthroplasty, there is little information about factors affecting initial fixation of these components in the scapular neck. This study was performed to assess the characteristics of structural fixation of pegged glenoid components, if inserted with two different recommended cementing techniques. Six fresh-frozen shoulder specimens and two types of glenoid components were used. The glenoids were prepared according to the instructions and with the instrumentation of the manufacturer. In 3 specimens, the bone cement was inserted into the peg receiving holes (n = 12) and applied to the back surface of the glenoid component with a syringe. In the other 3 specimens, the cement was inserted into the holes (n = 15) by use of pure finger pressure: no cement was applied on the backside of the component. Micro-computed tomography scans with a resolution of 36 microm showed an intact cement mantle around all 12 pegs (100%) when a syringe was used. An incomplete cement plug was found in 7 of 15 pegs (47%) when the finger-pressure technique was used. Cement penetration into the cancellous bone was deeper in osteopenic bone. Application of bone cement on the backside of the glenoid prosthesis improved seating by filling out small spaces between bone and polyethylene resulting from irregularities after reaming or local cement extrusion from a drill hole. The fixation of a pegged glenoid component is better if the holes are filled with cement under pressure by use of a syringe and if cement is applied to the back of the glenoid component than if cement is inserted with pure finger pressure and no cement is applied to the back surface of the component.

Noninvasive monitoring of changes in structural cancellous bone parameters with a novel prototype micro-CT.

Characterization of trabecular bone structures requires necropsy of animals followed by a labor-intense histomorphometric or ex vivo micro-CT analysis. We tested the novel vivaCT40 from Scanco Medical AG (Bassersdorf, Switzerland), which allows monitoring such changes repeatedly in anesthetized rats and mice. Postmenopausal osteoporosis: in 8-month-old ovariectomized (OVX) rats, the vivaCT40 was capable of picking up the decrease in trabecular bone volume and trabecular thinning as well as the decrease in the number of trabecular elements as a function of time. The bone anabolic effects of parathyroid hormone [hPTH(1-34)], which resulted in an increase in trabecular thickness but not their number, as well as the bone protective effect of the two antiresorptive agents zoledronic acid (ZA) and 17-alpha ethinylestradiol (aEE), were detected correctly with the vivaCT40. Adjuvans arthritis: the vivaCT40 allowed measuring trabecular bone loss caused by periarticular inflammation in a rat model of adjuvans arthritis and demonstrated the bone protective effect of dexamethasone (DM). In addition, it was possible to image the subtle erosive lesions in subchondral bone caused by the inflammatory processes. Tumor osteolysis: the vivaCT40 allowed monitoring of the progressive osteolytic response following the local administration of 4T1luc2000 tumor cells into the tibia metaphysis of nude mice. The potent protective effect of ZA on tumor osteolysis was demonstrated. In summary, the new vivaCT40 can monitor the effects of known agents and diseases such as osteoporosis, inflammatory arthritis, and tumor invasion on 3-D trabecular microarchitecture accurately, repeatedly, reliably, and quickly in anesthetized rats and mice. The scanner represents a breakthrough for noninvasive imaging and structural measurements in small rodents.

Association of osteopenia of the humeral head with full-thickness rotator cuff tears.

Rotator cuff tendon repair may fail for various reasons. Although the role of repair techniques and of the musculotendinous unit has been studied, there is little information on the quality of the bone to which the tendon is to be repaired. Therefore, 14 cadaveric humeral heads, 7 specimens without and 7 with a full-thickness rotator cuff tendon tear, were quantitatively assessed by use of high-resolution micro-computed tomography. Bone density is higher below the articular surface than in the greater tuberosity (40% vs 10%-20%), and tendon tears are associated with a reduction in cancellous bone density of greater than 50%, leading to a virtually hollow greater tuberosity, with intact cortical bone. The results found suggest that in long-standing rotator cuff tears, creating a deep trough should be avoided to achieve reliable tendon-to-bone contact. For optimal suture fixation to bone, sutures or anchors should be positioned subcortically or medially under the articular surface.