Unveiling Electron Optics in Two-Dimensional Materials by Nonlocal Resistance Mapping.

We propose a technique based on nonlocal resistance measurements for mapping transport in electron optics experiments. Utilizing tight-binding transport methods, we show how to use a four-terminal measurement to isolate the ballistic transport from a single lead of interest and reconstruct its contribution to the local density of states. This enables us to propose an experimentally tractable four-terminal device with via contacts for measuring Veselago lensing in a graphene p-n junction. Furthermore, we demonstrate how to extend this method as a scanning probe technique, implementing mapping of complex electron optics experiments including angled junctions, collimation optics, and beam steering. Our results highlight the fundamental importance of electron dephasing in ballistic transport and provide guidelines for isolating electron optics signals of interest. These findings unveil a fresh approach to performing electron optics experiments, with a plethora of two-dimensional material platforms to explore.

Hexagonal Boron Nitride Slab Waveguides for Enhanced Spectroscopy of Encapsulated 2D Materials.

The layered insulator hexagonal boron nitride (hBN) is a critical substrate that brings out the exceptional intrinsic properties of two-dimensional (2D) materials such as graphene and transition metal dichalcogenides (TMDs). In this work, the authors demonstrate how hBN slabs tuned to the correct thickness act as optical waveguides, enabling direct optical coupling of light emission from encapsulated layers into waveguide modes. Molybdenum selenide (MoSe2 ) and tungsten selenide (WSe2 ) are integrated within hBN-based waveguides and demonstrate direct coupling of photoluminescence emitted by in-plane and out-of-plane transition dipoles (bright and dark excitons) to slab waveguide modes. Fourier plane imaging of waveguided photoluminescence from MoSe2 demonstrates that dry etched hBN edges are an effective out-coupler of waveguided light without the need for oil-immersion optics. Gated photoluminescence of WSe2 demonstrates the ability of hBN waveguides to collect light emitted by out-of-plane dark excitons.Numerical simulations explore the parameters of dipole placement and slab thickness, elucidating the critical design parameters and serving as a guide for novel devices implementing hBN slab waveguides. The results provide a direct route for waveguide-based interrogation of layered materials, as well as a way to integrate layered materials into future photonic devices at arbitrary positions whilst maintaining their intrinsic properties.

High-speed metamagnetic switching of FeRh through Joule heating.

Due to its proximity to room temperature and demonstrated high degree of temperature tunability, FeRh's metamagnetic ordering transition is attractive for novel high-performance computing devices seeking to use magnetism as the state variable. We demonstrate electrical control of the antiferromagnetic-to-ferromagnetic transition via Joule heating in FeRh wires. The magnetic transition of FeRh is accompanied by a change in resistivity, which can be probed electrically and allows for integration into switching devices. Finite element simulations based on abrupt state transition within each domain result in a globally smooth transition that agrees with the experimental findings and provides insight into the thermodynamics involved. We measure a 150 K decrease in transition temperature with currents up to 60 mA, limited only by the dimensions of the device. The sizeable shift in transition temperature scales with current density and wire length, suggesting the absolute resistance and heat dissipation of the substrate are also important. The FeRh phase change is evaluated by pulsed I-V using a variety of bias conditions. We demonstrate high speed (~ ns) memristor-like behavior and report device performance parameters such as switching speed and power consumption that compare favorably with state-of-the-art phase change memristive technologies.

Acoustic cavities in 2D heterostructures.

Two-dimensional (2D) materials offer unique opportunities in engineering the ultrafast spatiotemporal response of composite nanomechanical structures. In this work, we report on high frequency, high quality factor (Q) 2D acoustic cavities operating in the 50-600 GHz frequency (f) range with f × Q up to 1 × 1014. Monolayer steps and material interfaces expand cavity functionality, as demonstrated by building adjacent cavities that are isolated or strongly-coupled, as well as a frequency comb generator in MoS2/h-BN systems. Energy dissipation measurements in 2D cavities are compared with attenuation derived from phonon-phonon scattering rates calculated using a fully microscopic ab initio approach. Phonon lifetime calculations extended to low frequencies (<1 THz) and combined with sound propagation analysis in ultrathin plates provide a framework for designing acoustic cavities that approach their fundamental performance limit. These results provide a pathway for developing platforms employing phonon-based signal processing and for exploring the quantum nature of phonons.

Direct-Write of Nanoscale Domains with Tunable Metamagnetic Order in FeRh Thin Films.

We have directly written nanoscale patterns of magnetic ordering in FeRh films using focused helium-ion beam irradiation. By varying the dose, we pattern arrays with metamagnetic transition temperatures that range from the as-grown film temperature to below room temperature. We employ transmission electron microscopy, X-ray diffraction, and temperature-dependent transport measurements to characterize the as-grown film, and magneto-optic Kerr effect imaging to quantify the He+ irradiation-induced changes to the magnetic order. Moreover, we demonstrate temperature-dependent optical microscopy and conductive atomic force microscopy as indirect probes of the metamagnetic transition that are sensitive to the differences in dielectric properties and electrical conductivity, respectively, of FeRh in the antiferromagnetic (AF) and ferromagnetic (FM) states. Using density functional theory, we quantify strain- and defect-induced changes in spin-flip energy to understand their influence on the metamagnetic transition temperature. This work holds promise for in-plane AF-FM spintronic devices, by reducing the need for multiple patterning steps or different materials, and potentially eliminating interfacial polarization losses due to cross material interfacial spin scattering.

Gate-Tunable Graphene-WSe2 Heterojunctions at the Schottky-Mott Limit.

Metal-semiconductor interfaces, known as Schottky junctions, have long been hindered by defects and impurities. Such imperfections dominate the electrical characteristics of the junction by pinning the metal Fermi energy. Here, a graphene-WSe2 p-type Schottky junction, which exhibits a lack of Fermi level pinning, is studied. The Schottky junction displays near-ideal diode characteristics with large gate tunability and small leakage currents. Using a gate electrostatically coupled to the WSe2 channel to tune the Schottky barrier height, the Schottky-Mott limit is probed in a single device. As a special manifestation of the tunable Schottky barrier, a diode with a dynamically controlled ideality factor is demonstrated.