Three-dimensional skeletal and dentoalveolar sagittal and vertical changes associated with cantilever Herbst appliance in prepubertal patients with Class II malocclusion.

INTRODUCTION: This study aimed to assess sagittal and vertical skeletal and dentoalveolar changes through the use of 3-dimensional imaging in prepubertal Class II malocclusion patients treated with a cantilever Herbst appliance (HA). Condyle-glenoid fossa positional changes were also quantified. METHODS: This retrospective cohort study assessed 22 children (11.2 years ± 1.2) consecutively treated with a cantilever HA for 12 months and 11 untreated children (aged 9.3 ± 0.30 years) that served as controls. Cone-beam computed tomography was performed at baseline (T1) and at the end of the observation period (T2). Movements in the regions of interest were measured as linear displacements from cone-beam computed tomography images through algebraic calculations. A Student t test for independent samples was used for group equivalence testing at T1, and the treatment differences between T2 and T1 were evaluated by 2 analyses of covariance, one considering the expected growth unit as a covariate and the other with an annualized factor. RESULTS: The largest dental movement was a mesial movement of mandibular molars (3.70 mm), whereas the largest skeletal changes consisted of a larger relative length of the mandible (difference of 1.2 mm) in the HA group than in the control group. CONCLUSIONS: Within the study limitations (retrospective cohort, historical control group, and sample size), 3-dimensional imaging suggests that HA corrected Class II malocclusion in a predominantly prepubertal sample through more dental than skeletal changes. The changes were more significant in the sagittal than in the vertical direction. In addition, relative stability in the condyle-fossa relationship was noted.

Effect of photobiomodulation on the stability and displacement of orthodontic mini-implants submitted to immediate and delayed loading: a clinical study.

The aim of this study was to evaluate the effect of photobiomodulation (PBM) on the stability and displacement of orthodontic mini-implants (MIs) submitted to loading. Forty-eight and 35 mini-implants (1.5 × 8 × 1 mm) were assessed for stability and displacement, respectively (19 patients). MIs were allocated according to the intervention in 1-PBM + immediate loading (IL), 2-PBM + delayed loading (DL) (four weeks after implantation), 3-IL only, and 4-DL only. PBM (Therapy XT, DCM) was implemented using a red emission (660 nm, 4 J/cm2, 0.1 W, 20 s) immediately after implantation (day 0) and infrared emissions (808 nm; 8 J/cm2, 0.1 W, 40 s) in the following appointments every 48-72 h during two weeks (days 2, 4, 7, 9, 11, and 14). Loading of 150 gF was applied during three months for all MIs. The stability was assessed by resonance frequency analysis (Osstell ISQ), and images from Cone beam computed tomography were evaluated to determine the amount of the displacement of the MI's head. MIs from the PBM groups presented lower loss of stability (P = 0.0372). When the analysis considered the loading protocol as an additional variable, group two showed the lowest loss of stability, being significantly different from groups that did not receive PBM (P = 0.0161). There was no difference between groups two and four during the period without loading (P > 0.05). DL groups presented lower loss when the effective period of loading was assessed, independently of the application of PBM (P < 0.0001). All groups showed displacement of the MIs head without significant differences (P > 0.05). DL potentiated the effect of PBM, decreasing the loss of stability.

Presurgical Preparation of Infants With Unilateral Cleft Lip and Palate: The SAC-PP-MR Innovative Technique.

In this article, we demonstrate an effective, cheap, and fast way to shape the nasal alar cartilage in patients with unilateral cleft lip and palate. This technique straightens the vomer and brings the philtrum, columella, premaxilla, and the maxillary frenum to the midsagittal plane, while the alveolar ridges are shaped and positioned. This reduces the lip and palatal cleft to zero even in a 4-week period.

Buccal bone plate thickness after rapid maxillary expansion in mixed and permanent dentitions.

INTRODUCTION: Rapid maxillary expansion (RME) might cause buccal displacement of anchor teeth. Dislocation of teeth outside their alveolar process can damage the periodontium; for this reason, maxillary expansion using deciduous teeth as anchorage in the mixed dentition might be suggested. The aim of this study was to compare changes of buccal bone plate thickness on the maxillary permanent first molars after RME in the mixed and permanent dentitions with different types of anchorage. METHODS: Two groups of patients were evaluated with cone-beam computed tomography before and after RME. Group E (21 patients) underwent RME using deciduous teeth as anchorage; group 6 (16 patients) underwent RME using permanent teeth as anchorage. The Wilcoxon test was used to compare changes between the time points in the same groups, and the Mann-Whitney U test was used to compare differences between the groups. RESULTS: In group E, generally, no statistically significant reduction was found in buccal bone plate thickness between the time points. In group 6, most measurements showed significant reductions in buccal bone plate thickness (P <0.05) between the time points, with a maximum decrease of 1.25 mm. CONCLUSIONS: RME in the mixed dentition with the appliance anchored to deciduous teeth did not reduce the buccal bone plate thickness of the maxillary permanent first molars, except for the mesial roots on both sides. RME in the permanent dentition caused a reduction of the buccal bone plate thickness of the maxillary permanent first molars when they were used as anchorage in the permanent dentition.

Metabolic effects of treatment in patients with obstructive sleep apnea: a systematic review.

INTRODUCTION: Growth retardation was frequently observed in obstructive sleep apnea (OSA) patients but the complex mechanisms causing this condition are still unclear. Several findings suggested growth catch-up after surgical treatment but other studies did not confirm the results, showing no improvement in OSA patients after tonsillectomy and adenoidectomy (T&A). The aim of the present study was to systematically review scientific literature of the relationships between OSA and metabolic changes involving growth hormone (GH) axis before and after treatment in patients. EVIDENCE ACQUISITION: Different databases were searched without limitations up to August 2017. Additionally, the bibliographies of the finally selected articles were hand searched to identify any relevant publications that were not previously identified. EVIDENCE SYNTHESIS: From the 37 studies collected from all the databases based on their title and abstract, only 12 studies actually fulfilled the selection criteria. From the twelve finally selected articles, eight focused on growth mediators, two evaluated endothelial mediators, one focused on neurocognitive function and mediators and one focused on local inflammation. CONCLUSIONS: OSA children present lower levels of growth mediators (IGF-I and IGFBP-3) thus indicating growth retardation, significantly higher cardiovascular disease risk and decreased cognitive functions when compared to controls. T&A seems to improve all the above mentioned functions with great impact on general health.

Cephalometric landmark identification consistency between undergraduate dental students and orthodontic residents in 3-dimensional rendered cone-beam computed tomography images: A preliminary study.

INTRODUCTION: The aim of this study was to compare 3-dimensional landmark consistency and precision in skeletal structures in groups with different levels of experience with 2-dimensional cephalometrics. METHODS: Sixteen observers, all undergraduate or graduate students, were divided into 4 groups with different levels of experience in 2-dimensional landmarking and no previous experience in 3 dimensions. Group 1 consisted of 4 third-year dental students with no experience in cephalometric landmarking. Groups 2, 3, and 4 consisted of first-, second-, and third-year graduate students, with increasing levels of experience. The participants located 18 landmarks in 12 surface models of cone-beam computed tomography scans of patients on 3 separate occasions. The average of all examiners locating each landmark was defined as the centroid. The mean of the distances of each located point to the centroid of that landmark was used as the mean consistency (MC), and the standard deviation (SD) was used as the precision. Analysis of variance and post hoc Tukey comparisons between groups were done. RESULTS: The MC and SD values across landmarks, patients, and examiners were 1.03 ± 1.14 mm. The MC and SD were 0.89 ± 0.83 mm for group 1 with no experience, 1.02 ± 0.95 mm for group 2, 1.17 ± 1.60 mm for group 3, and 1.05 ± 1.00 mm for group 4. Significant differences were found among the groups. CONCLUSIONS: Comparing the observer groups studied, the undergraduate dental school students without previous experience in bidimensional cephalometrics obtained the best values in volumetric landmark location. Graduate students with increasing amounts of experience did not perform as well. These results and conclusions should be interpreted with caution because the number of subjects in each group was small.

Digital evaluation of nasal changes induced by rapid maxillary expansion with different anchorage and appliance design.

BACKGROUND: Scientific evidence showed that rapid maxillary expansion (RME) affects naso-maxillary complex, increasing nasal width and volume. This study aimed to evaluate nasal changes induced by rapid maxillary expansion with different anchorage and appliance design by using low dose and cone beam computed tomography. METHODS: A total of 44 patients (20 males, mean age 8y 8 m ± 1y 2 m; 24 females mean age 8y 2 m ± 1y 4 m) were included in the investigation and divided into three groups according to the appliance: Hyrax-type expander anchored to permanent teeth, modified Hyrax-type expander anchored to deciduous teeth, modified Haas-type expander anchored to deciduous teeth. Maxillary expansion was performed until overcorrection and the expander was passively kept in situ for 7 months at least. All patients had three-dimensional imaging before expansion (T0) and after the retention period (T1). Nasal floor width, nasal wall width, maxillary inter-molar width were measured by means of Mimics software. The paired sample t-test was employed to assess the significance of the differences between the time points; the analysis of variance test (ANOVA) was used to compare differences between groups. RESULTS: The statistical analysis revealed significant differences between T0 and T1 for each recorded measurement in each group; no significant differences were found by comparing groups. CONCLUSIONS: Rapid maxillary expansion produces a significant skeletal transverse expansion of nasal region in growing patients. No significant differences in nasal effects are expected when the appliance is anchored onto deciduous teeth, with or without the palatal acrylic coverage.

Precision and accuracy of suggested maxillary and mandibular landmarks with cone-beam computed tomography for regional superimpositions: An in vitro study.

INTRODUCTION: Our objective was to identify and evaluate the accuracy and precision (intrarater and interrater reliabilities) of various anatomic landmarks for use in 3-dimensional maxillary and mandibular regional superimpositions. METHODS: We used cone-beam computed tomography reconstructions of 10 human dried skulls to locate 10 landmarks in the maxilla and the mandible. Precision and accuracy were assessed with intrarater and interrater readings. Three examiners located these landmarks in the cone-beam computed tomography images 3 times with readings scheduled at 1-week intervals. Three-dimensional coordinates were determined (x, y, and z coordinates), and the intraclass correlation coefficient was computed to determine intrarater and interrater reliabilities, as well as the mean error difference and confidence intervals for each measurement. RESULTS: Bilateral mental foramina, bilateral infraorbital foramina, anterior nasal spine, incisive canal, and nasion showed the highest precision and accuracy in both intrarater and interrater reliabilities. Subspinale and bilateral lingulae had the lowest precision and accuracy in both intrarater and interrater reliabilities. CONCLUSIONS: When choosing the most accurate and precise landmarks for 3-dimensional cephalometric analysis or plane-derived maxillary and mandibular superimpositions, bilateral mental and infraorbital foramina, landmarks in the anterior region of the maxilla, and nasion appeared to be the best options of the analyzed landmarks. Caution is needed when using subspinale and bilateral lingulae because of their higher mean errors in location.

New algorithm for semiautomatic segmentation of nasal cavity and pharyngeal airway in comparison with manual segmentation using cone-beam computed tomography.

INTRODUCTION: Our objectives were to assess reliability, validity, and time efficiency of semiautomatic segmentation using Segura software of the nasal and pharyngeal airways, against manual segmentation with point-based analysis with color mapping. METHODS: Pharyngeal and nasal airways from 10 cone-beam computed tomography image sets were segmented manually and semiautomatically using Segura (University of Alberta, Edmonton, Alberta, Canada). To test intraexaminer and interexaminer reliabilities, semiautomatic segmentation was repeated 3 times by 1 examiner and then by 3 examiners. In addition to volume and surface area, point-based analysis was completed to assess the reconstructed 3-dimensional models from Segura against manual segmentation. The times of both methods of segmentation were also recorded to assess time efficiency. RESULTS: The reliability and validity of Segura were excellent (intraclass correlation coefficient, >0.9 for volume and surface area). Part analysis showed small differences between the Segura and manually segmented 3-dimensional models (greatest difference did not exceed 4.3 mm). Time of segmentation using Segura was significantly shorter than that for manual segmentation, 49 ± 11.0 vs 109 ± 9.4 minutes (P <0.001). CONCLUSIONS: Semiautomatic segmentation of the pharyngeal and nasal airways using Segura was found to be reliable, valid, and time efficient. Part analysis with color mapping was the key to explaining differences in upper airway volume and provides meaningful and clinically relevant analysis of 3-dimensional changes.

Short-term treatment effects produced by the Twin-block appliance: a systematic review and meta-analysis.

OBJECTIVE: To evaluate dental, skeletal, and soft tissue effects during Twin-block treatment. METHODS: A systematic search of several electronic databases (Medline, PubMed, Embase, all EBM reviews, and Web of Science) was conducted until July 2013, as well as a limited grey-literature search (Google Scholar). Human cephalometric studies that used a Twin-block appliance in a non-extraction and non-surgical approach were selected. A comparable control group of untreated subjects was required. Two authors independently reviewed and extracted data from the selected studies. Risk of bias was assessed. The type of meta-analysis was selected based on heterogeneity. RESULTS: Ultimately 10 articles were included. Proclination of lower incisors, retroclination of upper incisors, distal movement of upper molars and/or mesial movement of lower molars, increase in mandibular length, and/or forward movement of the mandible were consistently reported. Clinically significant restraint of maxillary growth was not found. Although the mandibular body length is increased, the facial impact of it is reduced by the simultaneous increment of the face height. Changes of lower face height and occlusal plane inclination varied, suggesting that vertical dimension can be manipulated in patients who would benefit from lower molar extrusion. As for lip position, there is not enough evidence to suggest clear lip position changes. CONCLUSIONS: Changes associated with a Class II correction were identified. Most of the changes individually were of limited clinical significance, but when combined reached clinical importance. No long-term changes were available.

Short-Term and Long-Term Changes of Nasal Soft Tissue after Rapid Maxillary Expansion (RME) with Tooth-Borne and Bone-Borne Devices. A CBCT Retrospective Study.

The objective of the study was to assess the changes in nasal soft tissues after RME was performed with tooth-borne (TB) and bone-borne (BB) appliances. Methods. This study included 40 subjects with a diagnosis of posterior cross-bite who received tooth-borne RME (TB, average age: 11.75 ± 1.13 years) or bone-borne RME (BB, average age: 12.68 ± 1.31 years). Cone-beam computed tomography (CBCT) was taken before treatment (T0), after a 6-month retention period (T1), and one year after retention (T2). Specific linear measurements of the skeletal components and of the soft-tissue region of the nose were performed. All data were statistically analyzed. Results. Concerning skeletal measurements, the BB group showed a greater skeletal expansion of the anterior and posterior region of the nose compared to the TB group (p < 0.05) immediately after RME. Both TB and BB RME induce a small increment (>1 mm) of the alar base and alar width, without significant differences between the two expansion methods (p > 0.05). A high correlation was found between skeletal and soft-tissue expansion in the TB group; instead, a weaker correlation was found in the BB group. Conclusion. A similar slight increment of the alar width and alar base width was found in both TB and BB groups. However, the clinical relevance of these differences, in terms of facial appearance, remains questionable.

Relationship between non-ulcerative functional dyspepsia, occlusal pairs and masticatory performance in partially edentulous elderly persons.

OBJECTIVE: To relate occlusal state, masticatory performance and non-ulcerative functional dyspepsia. BACKGROUND: In spite of the relationship between gastric disturbances and number of present teeth being recognised, the influence of the number of occlusal pairs and masticatory performance, expressed as median particle size, has not been considered. MATERIALS AND METHODS: Thirty-eight subjects (mean age = 71.8 ± 7.7 years) diagnosed with non-ulcerative functional dyspepsia were selected. A further 38 healthy subjects (mean age = 71.9 ± 7.0 years) acted as controls. Subjects were subdivided according to their number of occlusal pairs: (1) 0-4, (2) 5-9 and (3) 10-14. Masticatory performance was evaluated by using the sieving method. Data were analysed using 2-way anova and Bonferroni post-hoc, Chi-square and Odd ratio tests. RESULTS: Subjects presenting with non-ulcerative functional dyspepsia and 0-4 occlusal pairs showed the lowest masticatory performance (p < 0.01). No association between the dyspepsia and the number of occlusal pairs (χ(2) = 0.48, p = 0.785) was observed, however results showed association between functional dyspepsia and masticatory performance (χ(2) = 4.07, p = 0.0437) presenting an odds ratio = 3.46 (Confidence Interval = 0.99-12.10). CONCLUSION: Changes in masticatory performance were associated with the presence of non-ulcerative functional dyspepsia.

Cranial base foramen location accuracy and reliability in cone-beam computerized tomography.

INTRODUCTION: The purpose of this study was to evaluate the reliability and accuracy in locating several different foramina in the cranial base by using cone-beam computerized tomography (CBCT) images for future use in establishing reference coordinate systems. METHODS: CBCT images from 10 dry skulls were taken with and without the foramina ovale, spinosum, and rotundum, and the hypoglossal canals filled with radiopaque gutta-percha (gold standard). Three evaluators identified the foramen landmarks in the CBCT images without gutta-percha. Mean differences and main researcher intraexaminer and interexaminer reliability were measured by using intraclass correlation coefficients for all landmark coordinates. Descriptive statistics were calculated with respect to the landmark coordinates and distances to the reference points. RESULTS: Intraexaminer and interexaminer reliability values for the x-, y-, and z-coordinates for all landmarks were greater than 0.9 with the exception of 4 (of 72) points that still had acceptable interexaminer reliability (>0.75). Mean measurement error differences obtained in the principal investigator's trials were primarily less than 0.5 mm. When comparing the mean distance differences of the same examiner and between the 3 examiners with the gold standard, the highest difference obtained was 1.3 mm. CONCLUSIONS: Foramina spinosum, ovale, and rotundum, and the hypoglossal canal all provided high intraexaminer reliability and accuracy, and can be considered acceptable landmarks to use in establishing reference coordinate systems for future 3-dimensional superimposition analysis.

Reliability and accuracy of a method for measuring temporomandibular joint condylar volume.

OBJECTIVE: The aim of this study was to develop and validate a technique for mandibular condyle segmentation and volume determination by using cone beam computed tomography (CBCT). STUDY DESIGN: A dry skull was used to generate 3 dimensional (3-D)-printed mandible models that were then imaged by using CBCT. Semiautomatic segmentation of condyles was completed. The Frankfurt plane was established and translated to the most inferior point of the sigmoid notch, and the condylar volume superior to the plane was determined. This procedure was repeated on 3-D-printed mandibles by using physical landmarks and the water displacement method to obtain the physical volume. This was repeated 3 times to evaluate reliability. Sensitivity analysis was performed to demonstrate the effect of discrepancies in locating landmarks in the Frankfurt plane. Condylar volume measurements obtained from CBCT were compared with physical measurements through repeated-measures analysis of variance (ANOVA) to determine accuracy. RESULTS: Condylar volume obtained from CBCT and physical measurements resulted in an intraclass correlation coefficient of 0.988 (0.918, 0.998) (P < .01) with both modalities, demonstrating excellent intrarater reliability. The mean difference of volume measurements between the modalities was not statistically significant (P = .365). Potential discrepancies in porion coordinates had minimal impact on condylar volume change. CONCLUSIONS: The condylar segmentation technique proved to be a reliable and accurate method for evaluating condylar volume.

Three-dimensional assessment of the spheno-occipital synchondrosis and clivus after tooth-borne and bone-borne rapid maxillary expansion.

OBJECTIVES: To assess changes in spheno-occipital synchondrosis after rapid maxillary expansion (RME) performed with conventional tooth-borne (TB) and bone-borne (BB) appliances. MATERIALS AND METHODS: This study included 40 subjects with transverse maxillary deficiency who received TB RME or BB RME. Cone-beam computed tomography images (CBCT) were taken before treatment (T0), and after a 6-month retention period (T1). Three-dimensional surface models of the spheno-occipital synchondrosis and basilar part of the occipital bone were generated. The CBCTs taken at T0 and T1 were registered at the anterior cranial fossa via voxel-based superimposition. Quantitative evaluation of Basion displacement was performed with linear measurements and Euclidean distances. The volume of the synchndrosis was also calculated for each time point as well as the Nasion-Sella-Basion angle (N-S-Ba°). All data were statistically analyzed to perform inter-timing and intergroup comparisons. RESULTS: In both groups, there was a small increment of the volume of the synchondrosis and of N-S-Ba° (P < .05). Basion showed a posterosuperior pattern of displacement. However, no significant differences (P > .05) were found between the two groups. CONCLUSIONS: Although TB and BB RME seemed to have some effects on the spheno-occipital synchondrosis, differences were very small and clinically negligible.

Periodontal effects of maxillary expansion in adults using non-surgical expanders with skeletal anchorage vs. surgically assisted maxillary expansion: a systematic review.

OBJECTIVES: Describe and compare harmful periodontal effects as a consequence of maxillary expansion in adult patients with different types of anchorage devices in non-surgical expanders with skeletal anchorage and surgically assisted maxillary expansion. MATERIALS AND METHODS: An exhaustive search was carried out on the electronic databases PubMed (MEDLINE), Embase, Cochrane and LILACS. Additionally, journal references and grey literature were searched without any restrictions. After the selection and extraction process; risk of bias was assessed by the ROB-1 Cochrane tool and Newcastle-Ottawa Scale (NOS) for randomized trials and cohort studies, respectively. RESULTS: Of 621 studies retrieved from the searches, six were finally included in this review. One of them presented a low risk bias, while five were excellent respective to selection, comparability and outcomes. Results showed that maxillary expansion in adults using non-surgical expanders (bone-borne or tooth-bone-borne with bicortical skeletal anchorage) produce less harmful periodontal effects, such as: alveolar bending with an average range from 0.92° to 2.32°, compared to surgically assisted maxillary expansion (tooth-borne) of 6.4°; dental inclination with an average range from 0.07° to 2.4°, compared to surgically assisted maxillary expansion (tooth-borne) with a range from 2.01° to 5.56°. CONCLUSIONS: Although limited, the current evidence seems to show that the bone-borne or tooth-bone-borne with bicortical skeletal anchorage produces fewer undesirable periodontal effects.

Nutritional effects of implant therapy in edentulous patients--a systematic review.

PURPOSE: The aim of this study was to present all the relevant studies that have evaluated, with valid scientific methodology, the possible physical and nutrient intake improvement of edentulous subjects rehabilitated with removable and supported or retained implant denture, without restriction of suprastructure modalities, compared with those wearing conventional removable dentures. METHODS AND MATERIALS: Several electronic databases (Pubmed, Medline-Medline In-Process, Cochrane Library Database, Embase, and Lilacs) were searched, without language limitation. References from the selected articles were also hand searched. Abstracts which appeared to fulfill the initial selection criteria (comparison of nutritional state between conventional removable and supported or retained implant denture wearers) were selected by consensus and their original articles were then retrieved. Clinical trials that included anthropometric measurements or nutrient intake in removable and supported or retained implant denture wearers without syndrome and systemic influences, nor presenting surgical or other simultaneous treatment, which could affect the integrity during the evaluation period were finally selected. RESULTS: Only 5 articles met the selection criteria. Two studies (randomized clinical trials and prospective) found inadequate nutrient intake after treatment. One randomized clinical trial presented an improvement in nutritional state after treatment. One cross-sectional study showed an adequate nutritional state before and after treatment. These 4 studies found no significant difference between implant and conventional treatments. Finally, 1 cross-sectional study presented a difference between treatments, showing that the risk of malnutrition was higher for removable complete denture wearers. CONCLUSION: Considering the available evidence, the effect on the nutritional state in edentulous subjects treated with implant therapy is similar to the 1 obtained with conventional removable dentures. This effect does not necessarily mean an optimum nutritional state, which also depends on other factors not related to prosthodontic treatment.

Transverse, vertical, and anteroposterior changes from bone-anchored maxillary expansion vs traditional rapid maxillary expansion: a randomized clinical trial.

INTRODUCTION: The purpose of this study was to compare the transverse, vertical, and anteroposterior skeletal and dental changes in adolescents receiving expansion treatment with tooth-borne and bone-anchored expanders. Immediate and long-term changes were measured on cone-beam computed tomography (CBCT) images. METHODS: Sixty-two patients needing maxillary expansion were randomly allocated to 1 of 3 groups: traditional hyrax tooth-borne expander, bone-anchored expander, and control. CBCT images were taken at baseline, immediately after expansion, after removal of the appliance (6 months), and just before fixed bonding (12 months). Repeated measures multivariate analysis of variance (MANOVA) was applied to the distances and angles measured to determine the statistical significance in the immediate and long time periods. Bonferroni post-hoc tests were used to identify significant differences between the treatment groups. RESULTS: Immediately after expansion, the subjects in the tooth-borne expander group had significantly more expansion at the crown level of the maxillary first premolars (P = 0.003). Dental crown expansion was greater than apical expansion and skeletal expansion with both appliances. The control group showed little change (growth) over the 6-month interval. At 12 months, no group had a statistically significant difference in angle changes, suggesting symmetric expansion. Both treatment groups had significant long-term expansion at the level of the maxillary first molar crown and root apex, first premolar crown and root, alveolus in the first molar and premolar regions, and central incisor root. Tooth-borne expansion resulted in significantly more long-term expansion at the maxillary premolar crown and root than did bone-borne expansion. CONCLUSIONS: Both expanders showed similar results. The greatest changes were seen in the transverse dimension; changes in the vertical and anteroposterior dimensions were negligible. Dental expansion was also greater than skeletal expansion.

Intraexaminer and interexaminer reliabilities of landmark identification on digitized lateral cephalograms and formatted 3-dimensional cone-beam computerized tomography images.

INTRODUCTION: The purposes of this study were to determine and compare the intraexaminer and interexaminer reliabilities of commonly used cephalometric landmarks identified on digitized lateral cephalograms and formatted cone-beam computerized tomography (CBCT) images. METHODS: CBCT images from 10 randomly selected adolescent patients were obtained from the orthodontic records of a private practice. Measurement errors, and intraexaminer, and interexaminer reliability correlation coefficients (ICC) were obtained for all landmark coordinates. RESULTS: Intraexaminer and interexaminer reliabilities for all coordinates for most landmarks on the digital lateral cephalograms and CBCT images were greater than 0.9 (ICC value). The means of landmark locations differed by approximately 1 mm in most coordinates from the lateral cephalograms and were predominantly higher than 1 mm for all coordinates from the CBCT images. CONCLUSIONS: Intraexaminer and interexaminer reliabilities were high for most landmarks. Coordinates with greater measurement errors in the lateral cephalograms (condylion, gonion, porion, mandibular incisor apex, and posterior nasal spine) were in structures without clearly defined borders. In the CBCT images, gonion, condylion, and porion were located on surfaces that were flat or curved, making it difficult to recognize a specific reference point. Other less reliable landmarks (anterior nasal spine, posterior nasal spine, mandibular incisor apex) were located in structures with lower densities and could not be visualized with 3-dimensional reconstruction; thus, they had high measurement errors.

Long term skeletal and dental changes between tooth-anchored versus Dresden bone-anchored rapid maxillary expansion using CBCT images in adolescents: Randomized clinical trial.

OBJECTIVE: The aim of this study was to determine long-term skeletal and dental changes in tooth-anchored versus Dresden bone-anchored rapid maxillary expansion using CBCT images in adolescents. MATERIALS AND METHODS: In all, 29 adolescent patients (11-17 years of age) needing skeletal expansion were randomly allocated to two different groups treated by either a Dresden bone-anchored expander or a conventional hyrax expander. Patients included did not have previous orthodontic treatment, were non-syndromic and had all teeth present in mouth. CBCT images were taken before expansion and two or more years after expansion. An independent T-test was used to determine the statistical significance between treatment groups and paired T-test was used to compare the results before and after expansion in each group. RESULTS: Neither treatment group showed overall long-term different skeletal and dental changes in the transverse, anterior-posterior and vertical planes (P<0.05). Both treatment groups showed mild asymmetric skeletal expansion, but these were clinically insignificant. CONCLUSIONS: Both expanders had similar skeletal and dental results. The greatest changes were in the transverse plane. Changes in vertical and anterior-posterior were negligible.