RESUMEN
The dynamics of societal material stocks such as buildings and infrastructures and their spatial patterns drive surging resource use and emissions. Two main types of data are currently used to map stocks, night-time lights (NTL) from Earth-observing (EO) satellites and cadastral information. We present an alternative approach for broad-scale material stock mapping based on freely available high-resolution EO imagery and OpenStreetMap data. Maps of built-up surface area, building height, and building types were derived from optical Sentinel-2 and radar Sentinel-1 satellite data to map patterns of material stocks for Austria and Germany. Using material intensity factors, we calculated the mass of different types of buildings and infrastructures, distinguishing eight types of materials, at 10 m spatial resolution. The total mass of buildings and infrastructures in 2018 amounted to â¼5 Gt in Austria and â¼38 Gt in Germany (AT: â¼540 t/cap, DE: â¼450 t/cap). Cross-checks with independent data sources at various scales suggested that the method may yield more complete results than other data sources but could not rule out possible overestimations. The method yields thematic differentiations not possible with NTL, avoids the use of costly cadastral data, and is suitable for mapping larger areas and tracing trends over time.
Asunto(s)
Austria , AlemaniaRESUMEN
The low recycling rate of post-consumer plastic packaging waste (PPW), which is partly due to insufficient separate collection, heterogeneous composition and high levels of contamination, poses a challenge in Austria, where the recycling rate must double in order to meet the target of 55 %. This study analyzes key packaging characteristics of non-beverage plastic bottles influencing recyclability, using Vienna as a case study. Additionally, a net quantity indicator and separate collection rates were calculated. 738 bottles from mixed MSW and 1,159 bottles from separate PPW collection were analyzed. The main polymer's proportion described by the net quantity indicator was higher for bottles from separate collection (69-72 %) than from mixed MSW (58 %), showing that a large share of the foreign materials are residues and dirt, with significantly higher contents in mixed MSW (20 %) than in separate collection (11 %). With a separate collection rate of 19.2 %, the great potential for recycling currently lies in mixed MSW at 4,112 t/yr. Thereof, 46 % is uncolored, 54 % is colored/white and, in terms of material grade, 30 % is food grade. The most common filling volume for PET, PP and HDPE was 0.5 < x ≤ 1.5 L (23-59 %) and the most common decoration technology was label (60-85 %). PET and PP had the highest shares of food-grade bottles (37-46 %), while PP had the highest share of colored bottles (22-31 %). The mechanical recycling potential of bottles depends largely on packaging characteristics, influencing separate collection and also automatic sorting. Harmonized design specifications are therefore crucial for this heterogeneous PPW fraction.
Asunto(s)
Plásticos , Embalaje de Productos , Reciclaje , Reciclaje/métodos , Austria , Eliminación de Residuos/métodos , Administración de Residuos/métodos , Residuos Sólidos/análisis , Embalaje de AlimentosRESUMEN
Austria must recycle more packaging materials. Especially for plastic packaging waste, significant increases are necessary to reach the EU recycling targets for 2025 and 2030. In addition to improving separate collection and introducing a deposit system for specific fractions, the share of plastic packaging in mixed municipal solid waste (MSW) could be utilized. In Austria, about 1.8milliontonnes of mixed MSW are generated. This includes about 110,000 t/a of plastic packaging waste. Most of the mixed MSW (94 %) is sent directly or via residues from pre-treatment, such as mechanical-biological treatment or waste sorting, to waste incineration. While materials such as glass and metals can also be recovered from the bottom ash, combustible materials such as plastics must be recovered before incineration. This work aims to evaluate the recovery potential of plastic packaging waste in mixed MSW with automated waste sorting. For this purpose, two of the largest Austrian waste sorting plants, with a total annual throughput of about 280,000 t/a, were investigated. The investigation included regular sampling of selected output streams and sorting analysis. The results show that the theoretical recovery potential of plastic packaging from these two plants is 6,500 t/a on average. An extrapolation to Austria results in a potential of about 83,000 t/a. If losses due to further treatment, such as sorting and recycling, are considered, about 30,000 t/a of recyclate could be returned to plastic production. This would correspond to an increase in plastic packaging recycling rate from 25 % to 35 %.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Residuos Sólidos , Eliminación de Residuos/métodos , Austria , Plásticos , Reciclaje/métodos , Embalaje de ProductosRESUMEN
According to the EU Circular Economy Package, recycling of plastic packaging waste (PPW) has to be enhanced significantly by 2025 and 2030. Although a set of measures will be required along the whole value chain of plastic packaging, the process of separate collection remains the backbone. Hence, a detailed understanding of the performance of current separate collection systems is crucial. As a case study, the separate collection of PPW was analyzed within a single country, Austria, where a variety of collection procedures are implemented. By using the method of material flow analysis, separate collection rates in terms of quantities and qualities were analyzed for separate collection systems of different settlement patterns, target fractions, and service levels provided. Results show that the highest performance was achieved in systems that cover mainly rural areas and where all plastic packaging wastes are collected through curbside collection, with separate collection rates of 74-77%. With additional collection via collection centers, these values increased to 78%-83%. In comparison, the results for urban areas showed the lowest separate collection rate of 56%. In the case that separate collection targeted plastic bottles only, maximum collection rates of around 50 % were observed, with the tendency towards higher collection rates if co-mingled with metals. To enhance separate collection, a general shift to the target fraction "all plastic packaging" instead of "plastic bottles only" is crucial. Modelling of optimized collection systems in all Austrian regions would lead to a theoretical total separation collection rate of 74%.
Asunto(s)
Plásticos , Urbanización , Austria , Embalaje de Productos , Análisis de SistemasRESUMEN
Bottom ash is the primary solid residue arising from municipal solid waste incineration. It consists of valuable materials such as minerals, metals and glass. Recovering these materials from bottom ash becomes evident when integrating Waste-to-Energy within the circular economy strategy. To assess the recycling potential from bottom ash, detailed knowledge of its characteristics and composition is required. The study at hand aims to compare the quantity and quality of recyclable materials present in bottom ash from a fluidized bed combustion plant and a grate incinerator, both located in the same city in Austria and receiving mainly municipal solid waste. The investigated properties of the bottom ash are grain-size distribution, contents of recyclable metals, glass, and minerals in different grain size fractions, and the total and leaching contents of substances in minerals. The study results reveal that most recyclables present are of better quality for the bottom ash arising at the fluidized bed combustion plant. Metals are less corroded, glass contains fewer impurities, minerals contain fewer heavy metals, and their leaching behavior is also favorable. Furthermore, recoverable materials, such as metals and glass are more isolated and not incorporated into agglomerates as observed in grate incineration bottom ash. Based on the input to the incinerators more aluminum and significantly more glass can potentially be recovered from bottom ash from fluidized bed combustion. On the downside, fluidized bed combustion produces about five times more fly ash per unit of waste incinerated, which is currently disposed of in landfills.
Asunto(s)
Incineración , Metales Pesados , Incineración/métodos , Ceniza del Carbón , Residuos Sólidos/análisis , Metales Pesados/análisis , MineralesRESUMEN
Enhanced treatment of incineration bottom ashes (IBA) from municipal solid waste incineration can contribute to a circular economy since not only metals can be recovered but also glass for recycling. Moreover, the remaining mineral fraction can be utilized in concrete as manufactured aggregate. To evaluate the effects of an enhanced treatment, three IBAs from fluidized bed combustion (FB-IBAs) and three grate incineration bottom ashes (G-IBAs) were standardly treated in a jig and further processed on a pilot scale, including improved metal recovery and sensor-based glass separation. The removed glass fractions were weighed and their composition was assessed by means of manual sorting. The manufactured aggregate was also sorted manually and its total and leachate contents were determined before and after aging. Results showed general differences between FB-IBAs and G-IBAs. For G-IBAs, higher contents of heavy metals and residual metal pieces were determined, while the share of glass removed was low compared to FB-IBA. The treated mineral fractions from G-IBA contained more mineral agglomerates, whereas FB-IBAs contained more glass. However, the glass-fractions removed from FB-IBAs need further treatment to be accepted in glass recycling. Austrian limit values for utilization in concrete were met by all manufactured aggregates produced from FB-IBA, but only by one from G-IBA. Overall, the enhanced treatment in the study performed well compared to the literature. Nevertheless, further investigations are necessary to improve the recyclability of the recovered glass fractions and to determine the technical suitability of manufactured aggregates produced from IBAs.
Asunto(s)
Incineración , Metales Pesados , Ceniza del Carbón , Metales Pesados/análisis , Residuos Sólidos/análisis , ReciclajeRESUMEN
The paper is related to the suggestion of metrics for measuring and fostering circular economy. Besides a recycling rate based evaluation, the author recommend to include also a subsitution factor describing the share of primary resources subsituted by the establishment of a circular economy.
Asunto(s)
ReciclajeRESUMEN
Almost 500 municipal solid waste incineration plants in the EU, Norway and Switzerland generate about 17.6 Mt/a of incinerator bottom ash (IBA). IBA contains minerals and metals. Metals are mostly separated and sold to the scrap market and minerals are either disposed of in landfills or utilised in the construction sector. Since there is no uniform regulation for IBA utilisation at EU level, countries developed own rules with varying requirements for utilisation. As a result from a cooperation network between European experts an up-to-date overview of documents regulating IBA utilisation is presented. Furthermore, this work highlights the different requirements that have to be considered. Overall, 51 different parameters for the total content and 36 different parameters for the emission by leaching are defined. An analysis of the defined parameter reveals that leaching parameters are significantly more to be considered compared to total content parameters. In order to assess the leaching behaviour nine different leaching tests, including batch tests, up-flow percolation tests and one diffusion test (monolithic materials) are in place. A further discussion of leaching parameters showed that certain countries took over limit values initially defined for landfills for inert waste and adopted them for IBA utilisation. The overall utilisation rate of IBA in construction works is approximately 54 wt%. It is revealed that the rate of utilisation does not necessarily depend on how well regulated IBA utilisation is, but rather seems to be a result of political commitment for IBA recycling and economically interesting circumstances.
Asunto(s)
Ceniza del Carbón , Incineración , Europa (Continente) , Noruega , Residuos Sólidos , SuizaRESUMEN
Environmental policies in the European Union focus on the prevention of hazardous waste and aim to mitigate its impact on human health and ecosystems. However, progress is promoting a shift in perspective from environmental impacts to resource recovery. Municipal solid waste incineration (MSWI) has been increasing in developed countries, thus the amount of air pollution control residues (APCr) and fly ashes (FA) have followed the same upward trend. APCr from MSWI is classified as hazardous waste in the List of Waste (LoW) and as an absolute entry (19 01 07*), but FA may be classified as a mirror entry (19 0 13*/19 01 14). These properties arise mainly from their content in soluble salts, potentially toxic metals, trace organic pollutants and high pH in contact with water. Since these residues have been mostly disposed of in underground and landfills, other possibilities must be investigated to recover secondary raw materials and products. According to the literature, four additional routes of recovery have been found: detoxification (e.g. washing), product manufacturing (e.g. ceramic products and cement), practical applications (e.g. CO2 sequestration) and recovery of materials (e.g. Zn and salts). This work aims to identify the best available technologies for material recovery in order to avoid landfill solutions. Within this scope, six case studies are presented and discussed: recycling in lightweight aggregates, glass-ceramics, cement, recovery of zinc, rare metals and salts. Finally, future perspectives are provided to advance understanding of this anthropogenic waste as a source of resources, yet tied to safeguards for the environment.
RESUMEN
A number of studies present the utilization of fly ashes from municipal solid waste incineration (MSWI) in cement production as a recycling alternative to landfilling. While there is a lot of research on the impact of MSWI fly ashes utilization in cement production on the quality of concrete or the leaching of heavy metals, only a few studies have determined the resulting heavy metal content in cements caused by this MSWI fly ashes utilization. Making use of the case of Austria, this study (1) determines the total content of selected heavy metals in cements currently produced in the country, (2) designs a scenario and calculates the resulting heavy metal contents in cements assuming that all MSWI fly ashes from Austrian grate incinerators were used as secondary raw materials for Portland cement clinker production and (3) evaluates the legal recyclability of demolished concretes produced from MSWI fly ash amended cements based on their total heavy metal contents. To do so, data from literature and statistics are combined in a material flow analysis model to calculate the average total contents of heavy metals in cements and in the resulting concretes according to the above scenario. The resulting heavy metal contents are then compared (i) to their respective limit values for cements as defined in a new technical guideline in Austria (BMLFUW, 2016), and (ii) to their respective limit values for recycling materials from demolished concrete. Results show that MSWI fly ashes utilization increases the raw material input in cement production by only +0.9%, but the total contents of Cd by +310%, and Hg, Pb, and Zn by +70% to +170%. However these and other heavy metal contents are still below their respective limit values for Austrian cements. The same legal conformity counts for recycling material derived from concretes produced from the MSWI fly ash cements. However, if the MSWI fly ash ratio in all raw materials used for cement production were increased from 0.9% to 22%, which is suggested by some studies, the limit values for cements as defined by the BMLFUW (2016) will be exceeded. Furthermore, the concrete produced from this cement will not be recyclable anymore due to its high total heavy metal contents. This and the comparatively high contribution of MSWI fly ashes to total heavy metal contents in cements indicate their relatively low resource potential if compared to other secondary raw materials in the cement industry.
Asunto(s)
Ceniza del Carbón/análisis , Materiales de Construcción/análisis , Metales Pesados/análisis , Administración de Residuos/métodos , Austria , Incineración , Eliminación de Residuos , Residuos Sólidos/análisisRESUMEN
As current disposal practices for municipal solid waste incineration (MSWI) fly ash are either associated with significant costs or negative environmental impacts, an alternative treatment was investigated in a field scale experiment. Thereto, two rotary kilns were fed with hazardous waste, and moistened MSWI fly ash (water content of 23%) was added to the fuel of one kiln with a ratio of 169kg/Mg hazardous waste for 54h and 300kg/Mg hazardous waste for 48h while the other kiln was used as a reference. It was shown that the vast majority (>90%) of the inserted MSWI fly ash was transferred to the bottom ash of the rotary kiln. This bottom ash complied with the legal limits for non-hazardous waste landfills, thereby demonstrating the potential of the investigated method to transfer hazardous waste (MSWI fly ash) into non-hazardous waste (bottom ash). The results of a simple mixing test (MSWI fly ash and rotary kiln bottom ash have been mixed accordingly without thermal treatment) revealed that the observed transformation of hazardous MSWI fly ash into non-hazardous bottom ash during thermal co-treatment cannot be referred to dilution, as the mixture did not comply with legal limits for non-hazardous waste landfills. For the newly generated fly ash of the kiln, an increase in the concentration of Cd, K and Pb by 54%, 57% and 22%, respectively, was observed. In general, the operation of the rotary kiln was not impaired by the MSWI fly ash addition.
Asunto(s)
Residuos Peligrosos , Administración de Residuos/métodos , Austria , Ceniza del Carbón , Incineración , Metales Pesados/química , Administración de Residuos/instrumentaciónRESUMEN
Phosphorous (P) is a limited and non-substitutable resource. Sewage sludge contains significant amounts of P and is therefore a widely applied fertilizer. Due to its organic and inorganic contaminants, sewage sludge is also combusted in industrial facilities as well as in waste incinerators. This study compares five common methods and one novel alternative based on a thermo-chemical process to treat and dispose of sewage sludge with regard to environmental impact, resource recovery, and materials dissipation. The comparison is based on material flow analysis, energy balances, selected LCA impact analysis, and statistical entropy analysis. This work shows that the novel technology combines both advantages of the established practices: organic and inorganic pollutants are either destroyed or removed from the P containing material, and the P returned to the soil exhibits high plant-availability. The novel method also has low emissions. The additional energy requirements should be reduced. However, with regards to sewage sludge P recovery is more important than energy recovery.