Third-generation sequencing-selected Scardovia wiggsiae promotes periodontitis progression in mice.

BACKGROUNDS: Periodontitis is an oral-bacteria-directed disease that occurs worldwide. Currently, periodontal pathogens are mostly determined using traditional culture techniques, next-generation sequencing, and microbiological screening system. In addition to the well-known and cultivatable periodontal bacteria, we aimed to discover a novel periodontal pathogen by using DNA sequencing and investigate its role in the progression of periodontitis. OBJECTIVE: This study identified pathogens from subgingival dental plaque in patients with periodontitis by using the Oxford Nanopore Technology (ONT) third-generation sequencing system and validated the impact of selected pathogen in periodontitis progression by ligature-implanted mice. METHODS: Twenty-five patients with periodontitis and 25 healthy controls were recruited in this study. Subgingival plaque samples were collected for metagenomic analysis. The ONT third-generation sequencing system was used to confirm the dominant bacteria. A mouse model with ligature implantation and bacterial injection verified the pathogenesis of periodontitis. Neutrophil infiltration and osteoclast activity were evaluated using immunohistochemistry and tartrate-resistant acid phosphatase assays in periodontal tissue. Gingival inflammation was evaluated using pro-inflammatory cytokines in gingival crevicular fluids. Alveolar bone destruction in the mice was evaluated using micro-computed tomography and hematoxylin and eosin staining. RESULTS: Scardovia wiggsiae (S. wiggsiae) was dominant in the subgingival plaque of the patients with periodontitis. S. wiggsiae significantly deteriorated ligature-induced neutrophil infiltration, osteoclast activation, alveolar bone destruction, and the secretion of interleukin-6, monocyte chemoattractant protein-1, and tumor necrosis factor-α in the mouse model. CONCLUSION: Our metagenome results suggested that S. wiggsiae is a dominant flora in patients with periodontitis. In mice, the induction of neutrophil infiltration, proinflammatory cytokine secretion, osteoclast activation, and alveolar bone destruction further verified the pathogenic role of S. wiggsiae in the progress of periodontitis. Future studies investigating the metabolic interactions between S. wiggsiae and other periodontopathic bacteria are warranted.

Vapor-Induced Pore-Forming Atmospheric-Plasma-Sprayed Zinc-, Strontium-, and Magnesium-Doped Hydroxyapatite Coatings on Titanium Implants Enhance New Bone Formation-An In Vivo and In Vitro Investigation.

OBJECTIVES: Titanium implants are regarded as a promising treatment modality for replacing missing teeth. Osteointegration and antibacterial properties are both desirable characteristics for titanium dental implants. The aim of this study was to create zinc (Zn)-, strontium (Sr)-, and magnesium (Mg)-multidoped hydroxyapatite (HAp) porous coatings, including HAp, Zn-doped HAp, and Zn-Sr-Mg-doped HAp, on titanium discs and implants using the vapor-induced pore-forming atmospheric plasma spraying (VIPF-APS) technique. METHODS: The mRNA and protein levels of osteogenesis-associated genes such as collagen type I alpha 1 chain (COL1A1), decorin (DCN), osteoprotegerin (TNFRSF11B), and osteopontin (SPP1) were examined in human embryonic palatal mesenchymal cells. The antibacterial effects against periodontal bacteria, including Porphyromonas gingivalis and Prevotella nigrescens, were investigated. In addition, a rat animal model was used to evaluate new bone formation via histologic examination and micro-computed tomography (CT). RESULTS: The ZnSrMg-HAp group was the most effective at inducing mRNA and protein expression of TNFRSF11B and SPP1 after 7 days of incubation, and TNFRSF11B and DCN after 11 days of incubation. In addition, both the ZnSrMg-HAp and Zn-HAp groups were effective against P. gingivalis and P. nigrescens. Furthermore, according to both in vitro studies and histologic findings, the ZnSrMg-HAp group exhibited the most prominent osteogenesis and concentrated bone growth along implant threads. SIGNIFICANCE: A porous ZnSrMg-HAp coating using VIPF-APS could serve as a novel technique for coating titanium implant surfaces and preventing further bacterial infection.

Suppressing Antibacterial Resistance: Chemical Binding of Monolayer Quaternary Ammonium Salts to Polymethyl Methacrylate in an Aqueous Solution and its Clinical Efficacy.

Antibacterial resistance (ABR) poses an enormous threat to human health. ABR mainly develops due to bacteria being constantly exposed to diluted levels of disinfectants. Here, we propose a method for suppressing ABR through the chemical binding of disinfectants to polymethyl methacrylate (PMMA) device surfaces in solutions of 5%, 10%, and 20% disinfectant concentrations. PMMA discs were fabricated from a commercial orthodontic acrylic resin system (Ortho-Jet) and quaternary ammonium salts (QAS), 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (42% in methanol), were used as the disinfectant. The PMMA surfaces were activated in 3 M sulfuric acid at 80 °C for 5 h for the esterification of hydrolyzed QAS to PMMA. Fourier transform infrared difference spectra confirmed that the carboxy-terminated PMMA was chemically bound to the QAS. In vitro cell viability tests using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assays revealed that 5%QAS-c-PMMA was more biocompatible than 10%QAS-c-PMMA and 20%QAS-c-PMMA. The results of antibacterial tests and clinical trials demonstrated the excellent antibacterial power of 5%QAS-c-PMMA. This method is the first solution-based approach to successfully avoid disinfectant leakage and subsequent ABR, as revealed by mass spectrometry studies of the solution obtained by agitating the disinfectant-bound PMMA for 28 days.

Comparison of Antibacterial Adhesion When Salivary Pellicle Is Coated on Both Poly(2-hydroxyethyl-methacrylate)- and Polyethylene-glycol-methacrylate-grafted Poly(methyl methacrylate).

Although poly(2-hydroxyethyl methacrylate) (pHEMA) and polyethylene glycol methacrylate (PEGMA) have been demonstrated to inhibit bacterial adhesion, no study has compared antibacterial adhesion when salivary pellicle is coated on polymethyl methacrylate (PMMA) grafted with pHEMA and on PMMA grafted with PEGMA. In this study, PMMA discs were fabricated from a commercial orthodontic acrylic resin system (Ortho-Jet). Attenuated total reflection-Fourier transform infrared spectra taken before and after grafting confirmed that pHEMA and PEGMA were successfully grafted on PMMA. Contact angle measurements revealed PMMA-pHEMA to be the most hydrophilic, followed by PMMA-PEGMA, and then by PMMA. Zeta potential analysis revealed the most negative surface charges on PMMA-PEGMA, followed by PMMA-pHEMA, and then by PMMA. Confocal laser scanning microscopy showed green fluorescence in the background, indicating images that influenced the accuracy of the quantification of live bacteria. Both the optical density value measured at 600 nm and single plate-serial dilution spotting showed that pHEMA was more effective than PEGMA against Escherichia coli and Streptococcus mutans, although the difference was not significant. Therefore, the grafting of pHEMA and PEGMA separately on PMMA is effective against bacterial adhesion, even after the grafted PMMA were coated with salivary pellicle. Surface hydrophilicity, bactericidality, and Coulomb repulsion between the negatively charged bacteria and the grafted surface contributed to the effectiveness.

Effect of dentin bonding agent diffusing through dentin slices on the reactive oxygen species production and apoptosis of pulpal cells.

BACKGROUND/PURPOSE: Dentin bonding agents (DBAs) are cytotoxic to dental pulp cells. This study aimed to evaluate the effects of three DBAs (Optibond Solo Plus, Op; Clearfil SE Bond, SE; and Xeno III, Xe) after diffusion through 0.2-mm or 0.5-mm dentin slices on reactive oxygen species (ROS) production and apoptosis in dental pulp cells. METHODS: The amounts of DBAs diffusing through 0.2-mm or 0.5-mm dentin slices were quantified using a UV-Vis spectrophotometer. The effects of diffused DBAs on ROS production and viability of dental pulp cells were investigated using terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) assay on Days 1 and 2. Flow cytometric analysis and double staining of treated dental pulp cells with Annexin V-fluorescein isothiocyanate (V-FITC) and propidium iodide (PI) were performed on Day 2. RESULTS: Xe showed greatest diffusion through dentin slices after 8-hour period, followed by SE and Op. Dental pulp cells produced a lesser amount of ROS, when treated with DBAs diffusing through a 0.5-mm dentin slice than through a 0.2-mm dentin slice for the same period of time. A small proportion of cells were TUNEL-positive after treatment with any of the three diffused DBAs. Annexin V-FITC/PI staining identified apoptotic cells; cell survival was higher in those cells treated with DBAs diffusing through a 0.5-mm dentin slice than through a 0.2-mm dentin slice. CONCLUSION: The three DBAs after diffusion through 0.2- or 0.5-mm dentin slice still exhibit cytotoxicity to dental pulp cells. However, the 0.5-mm dentin slice is found to be a better barrier than the 0.2-mm dentin slice to protect dental pulp cells from DBA-induced cytotoxicity.

Influence of calcium hydroxide dressing and acid etching on the push-out bond strengths of three luting resins to root canal dentin.

OBJECTIVES: This study aims to investigate the effects of calcium hydroxide (Ca(OH)2) dressing in root canals and the effects of subsequent acid etching on the adhesion of luting resins to root canals. MATERIALS AND METHODS: Root specimens were prepared from extracted human permanent molars. Specimen canals were (1) filled with etch-and-rinse (Nexus® third generation (NX3)) and two self-adhesive (RelyX Unicem, Maxcem Elite) luting resins, respectively; (2) dressed with Ca(OH)2 before Ca(OH)2 removal and luting resin filling; (3) dressed with Ca(OH)2 before Ca(OH)2 removal and post-cementation; or (4) treated as described in item (2) except that the canals were further etched with phosphoric acid before luting resin filling. Push-out bond strengths were measured and analyzed using one-way analysis of variance, and Fisher's multiple comparison tests provided a follow-up comparison among these four canal treatments. Attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were used to analyze the specimen surfaces. RESULTS: Ca(OH)2 dressing adversely affected the bond strengths to canal dentin of the three luting resins tested. Acid etching did not increase the bond strengths. Infrared analysis revealed that Ca(OH)2 dressing caused no structural changes on the dentin surface. XPS and SEM analyses revealed Ca(OH)2 remnants as the ultimate chemical cause leading to the decrease in bond strength. CONCLUSIONS: The bond strength of luting resin to dentin was affected by Ca(OH)2 dressing. Acid etching treatment could not increase the bond strength. CLINICAL RELEVANCE: Adhesion of the fiber post to the root canal wall may be compromised after Ca(OH)2 dressing. An effective method for complete removal of Ca(OH)2 dressing or increase of bond strength for luting resin needs to be developed.

Conjugation of diisocyanate side chains to dimethacrylate reduces polymerization shrinkage and increases the hardness of composite resins.

BACKGROUND/PURPOSE: Polymerization shrinkage is one of the main causes of dental restoration failure. This study tried to conjugate two diisocyanate side chains to dimethacrylate resins in order to reduce polymerization shrinkage and increase the hardness of composite resins. METHODS: Diisocyanate, 2-hydroxyethyl methacrylate, and bisphenol A dimethacrylate were reacted in different ratios to form urethane-modified new resin matrices, and then mixed with 50 wt.% silica fillers. The viscosities of matrices, polymerization shrinkage, surface hardness, and degrees of conversion of experimental composite resins were then evaluated and compared with a non-modified control group. RESULTS: The viscosities of resin matrices increased with increasing diisocyanate side chain density. Polymerization shrinkage and degree of conversion, however, decreased with increasing diisocyanate side chain density. The surface hardness of all diisocyanate-modified groups was equal to or significantly higher than that of the control group. CONCLUSION: Conjugation of diisocyanate side chains to dimethacrylate represents an effective means of reducing polymerization shrinkage and increasing the surface hardness of dental composite resins.

Biocompatibility and cytotoxicity of two novel low-shrinkage dental resin matrices.

BACKGROUND/PURPOSE: To reduce the polymerization shrinkage of dental composite resin, we used two different ratios of toluene 2,4-diisocyanate (TDI) or 1,6-hexamethylene diisocyanate (HDI) as functional side chains of bisphenol A-glycidyl methacrylate (bis-GMA) to synthesize two series of new dental resin matrices. This study evaluated the biocompatibility and cytotoxicity of these two series of new resin matrices. METHODS: Two series of new dental resin matrices with the ratios of TDI or HDI functional side chain to bis-GMA (defined as B group) being 1:4, 1:2, 1:1 and 3:2 (defined as T1/4, T1/2, T1, T3/2, and H1/4, H1/2, H1, H3/2 groups, respectively) were synthesized. Each resin sample was light cured and immersed in the culture medium for 24 hours to make the extract solution. Then, human gingival fibroblasts were cultured in different extract solutions for 72 hours. The cytotoxicities of different resins were evaluated by microtitertetrazolium (MTT) assay, the levels of cell-produced reactive oxygen species (ROS) induced by different extract solutions was measured. RESULTS: Resins of the T1/4 and B groups revealed significantly higher cytotoxicity than resins of other groups. However, resins of the T1 and T3/2 groups exhibited less cytotoxicity. In general, resins of the TDI-modified groups showed equal or less cytotoxicity and induced equal or lower levels of ROS than the corresponding resins of the HDI-modified and B groups. CONCLUSION: Our results showed that the TDI-modified resin matrices containing more functional side chains were less cytotoxic than the corresponding HDI-modified resin matrices. When the ratio of functional side chain to bis-GMA is increased, the stereo hindrance of resin structure is increased, more toxic resin monomers are trapped in the complicated resin structure, and thus the resin matrix reveals less cytotoxicity. The TDI-modified resin matrices exhibit higher stereo hindrance of resin structure and thus show less cytotoxicity than the corresponding HDI-modified resin matrices.

Covalent bonding of quaternary ammonium compounds and zwitterionic polymer functional layers on polydimethylsiloxane against Escherichia Coli adhesion.

Quaternary ammonium compounds (QACs) are recognized by the World Health Organization as a useful disinfectant against microbes. The synergistic effect of zwitterionic polymers with QACs as antimicrobial agents rather than QACs alone is yet to be investigated. A potential strategy is the use of covalent bonding to halt the release of minute antibacterials and a hierarchy of functional layers to detain and annihilate microbes. The strategy was tested on a polydimethylsiloxane (PDMS) surface on which quaternized poly(2-dimethylaminoethyl methacrylate) (qDMA+) and sulfobetaine (SBMA) were hierarchically functionalized. Attenuated total reflectance Fourier transform infrared analysis confirmed the quaternization of DMA to qDMA+, grafting of qDMA + on PDMS (PDMS-qDMA+), and grafting of the SBMA overlayer on PDMS-qDMA+ (PDMS-qDMA+-SB). Contact angle measurement showed that PDMS-qDMA + exhibited the lowest contact angle (26.2 ± 2.9°) compared with the hydrophobic PDMS (115.2 ± 1.6°), but that of PDMSqDMA+-SB increased to 56.3 ± 1.3°. The Escherichia coli survival count revealed that PDMS-qDMA+ and PDMS-qDMA+-SB exhibited significantly greater bactericidal ability than PDMS. Confocal laser scanning microscopy revealed fewer dead bacteria on PDMS-qDMA+-SB than on PDMS-qDMA+. Scanning electron microscopy demonstrated that E. coli was disintegrated on the functionalized surface via dual-end cell lysis. To the best of our knowledge, this is the first observation of this type of process. The results confirmed the potent antibacterial and cell disruption activities of the qDMA+ and SBMA modified PDMS surface.

Epigallocatechin-3-gallate diminishes cytokine-stimulated Cyr61 expression in human osteoblastic cells: a therapeutic potential for arthritis.

OBJECTIVE: To assess the effects of epigallocatechin-3-gallate (EGCG) on cytokine-induced Cyr61 synthesis in human osteoblastic cells and the associated signalling pathways. The therapeutic effect of EGCG on CIA in rats was also studied. METHODS: The expression of Cyr61 and NF-κB pathway molecules was examined by western blotting. CCL2 expression was assessed by northern blotting and ELISA. Interaction between NF-κB and Cyr61 promoter was evaluated by electrophoretic mobility shift assay. In rat CIA, osteoblastic expression of Cyr61 was examined by immunohistochemistry and disease progression was assessed by clinical, radiographic and histological examinations. RESULTS: EGCG inhibited Cyr61 expression stimulated by cytokines in primary human osteoblasts and human osteoblastic cell line U2OS. In U2OS, oncostatin M (OSM) induced IκB-α degradation through the mTOR/rictor/Akt pathway, and EGCG attenuated the action. Electrophoretic mobility shift assay revealed that the OSM-enhanced NF-κB/DNA binding was reduced by EGCG, possibly through abrogating nucleus localization of p65 and p50. Cyr61 enhanced OSM-induced expression of CCL2. Moreover, EGCG diminished OSM-stimulated CCL2 expression at least partially via suppressing Cyr61 induction. Co-distribution of CD68(+) macrophages and Cyr61(+) osteoblasts in osteolytic areas was obvious in the CIA model. Clinical, radiographic and immunohistochemical analyses revealed that administration of EGCG markedly diminished the severity of CIA, macrophage infiltration, and the number of Cyr61-synthesizing osteoblasts. CONCLUSION: By modulating the mTOR/rictor/Akt/NF-κB pathway, EGCG attenuated Cyr61 production in osteoblastic cells and in turn diminished macrophage chemotaxis. Our data support the therapeutic potential of EGCG on arthritis.

Development of a novel resin for provisional prostheses using hyperbranched polyurethane acrylate and triethylene glycol dimethacrylate - An in vitro study.

PURPOSE: To develop a novel resin for provisional prostheses using hyperbranched polyurethane acrylate (HBPUA) and triethylene glycol dimethacrylate (TEGDMA) with promising mechanical properties and low volumetric shrinkage. METHODS: Four groups including TIH3-0 (100 wt% TEGDMA), TIH3-30 (30 wt% HBPUA + 70 wt% TEGDMA), TIH3-60 (60 wt% HBPUA + 40 wt% TEGDMA), and TB-60 (60 wt% bisphenol A-glycidyl dimethacrylate + 40 wt% TEGDMA) were prepared and commercial Luxatemp (DMG) was used for comparison. Fourier transform infrared spectroscopy and gel permeation chromatography were used for material characterization. Mechanical properties including microhardness, flexural strength, flexural modulus, and load energy were measured before and after water immersion. Physical properties measurement included weight changes, solubility, water absorption, surface hydrophobicity, and volumetric shrinkage. Finally, biocompatibility was evaluated using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. RESULTS: The number- and weight-average molecular weights of the HBPUA were approximately 870 and 1480, respectively. The addition of HBPUA to TEGDMA increased the mechanical strength considerably. Although the weight changes and water absorption of TIH3-60 were higher than those of Luxatemp, the microhardness, flexural strength, flexural modulus, load energy, solubility, shrinkage, and biocompatibility of TIH3-60 were either comparable or superior to those of Luxatemp. CONCLUSION: Based on the findings of the present study, TIH3-60 has potential for development as a new provisional material.

The neutrophil elastase-upregulated placenta growth factor promotes the pathogenesis and progression of periodontal disease.

BACKGROUND: Periodontal disease is a chronic inflammatory disease. Given its high prevalence, especially in aging population, the detailed mechanisms about pathogenesis of periodontal disease are important issues for study. Neutrophil firstly infiltrates to periodontal disease-associated pathogen loci and amplifies the inflammatory response for host defense. However, excessive neutrophil-secreted neutrophil elastase (NE) damages the affected gingival. In lung and esophageal epithelium, NE had been proved to upregulate several growth factors including placenta growth factor (PGF). PGF is an angiogenic factor with proinflammatory properties, which mediates the progression of inflammatory disease. Therefore, we hypothesize excessive NE upregulates PGF and participates in the pathogenesis and progression of periodontal disease. METHODS: In gingival epithelial cells (GEC), growth factors array demonstrated NE-increased growth factors and further be corroborated by Western blot assay and ELISA. The GEC inflammation was evaluated by ELISA. In mice, the immunohistochemistry results demonstrated ligature implantation-induced neutrophil infiltration and growth factor upregulation. By multiplex assay, the ligature-induced proinflammatory cytokines level in gingival crevicular fluid (GCF) were evaluated. Finally, alveolar bone absorption was analyzed by micro-CT images and H & E staining. RESULTS: NE upregulated PGF expression and secretion in GEC. PGF promoted GEC to secret IL-1ß, IL-6, and TNF-α in GCF In periodontal disease animal model, ligature implantation triggered NE infiltration and PGF expression. Blockade of PGF attenuated the ligature implantation-induced IL-1ß, IL-6, TNF-α and MIP-2 secretion and ameliorated the alveolar bone loss in mice. CONCLUSION: In conclusion, the NE-induced PGF triggers gingival epithelium inflammation and promotes the pathogenesis and progression of periodontal disease.

In Vitro Bioactivity and Antibacterial Activity of Strontium-, Magnesium-, and Zinc-Multidoped Hydroxyapatite Porous Coatings Applied via Atmospheric Plasma Spraying.

The beneficial effects of Sr- and Mg-doped hydroxyapatite (HAp) on osteoblast proliferation and bone regeneration have been investigated in the past, and the antibacterial ability of Zn ions is well known. However, HAp coatings doped with these three elements via thermal spraying have not yet been investigated. In this study, HAp powder was synthesized at different pH values (4, 6, 8, and 10) and calcined at different temperatures (200, 400, 600, 800, and 1000 °C) to obtain HAp with the highest purity. Subsequently, strontium-, magnesium-, and zinc-doped HAp powders were synthesized at the optimal pH value and calcination temperature. The HAp powder was then coated onto Ti disks using atmospheric plasma spraying (APS) or vapor-induced pore-forming atmospheric plasma spraying (VIPF-APS) techniques at different working currents (350, 400, and 450 A) and spraying distances (10 and 15 cm). X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy equipped with energy-dispersive spectroscopy were used for material characterization to determine the optimal parameters. With these optimal coating parameters, HAp, Zn-HAp, SrMg-HAp, and ZnSrMg-HAp powders were deposited onto the Ti disks using VIPF-APS and named HAp-Ti, Zn-HAp-Ti, SrMg-HAp-Ti, and ZnSrMg-HAp-Ti, respectively. The in vitro bioactivity of these four groups was evaluated using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and alkaline phosphatase (ALPase) activity assay. Besides, the antibacterial activities against Prevotella nigrescens, Porphyromonas gingivalis, and Fusobacterium nucleatum were assessed. The results showed that the purity of HAp synthesized at pH 10 and 800 °C was 98.40%. A porous coating without cracks was obtained at a 10 cm spraying distance and 400 A working current using VIPF-APS. SrMg-HAp-Ti and ZnSrMg-HAp-Ti resulted in higher osteoblast proliferation and ALPase activity than the control. Moreover, both Zn-HAp-Ti and ZnSrMg-HAp-Ti exhibited antibacterial activity against the three bacteria. Therefore, ZnSrMg-HAp has potential as a coating for biomedical materials due to its ability to reduce bacterial infection and enhance osseointegration.

Atmospheric pressure plasma jet treatment enhances the effect of Alloy Primer on the bond strength between polymethyl methacrylate and stainless steels: application for retention of magnetic attachment to resin denture base.

Magnetic attachment system is used to embed in polymethyl methacrylate (PMMA) resin denture base to improve denture stability. However, dislodgement of magnetic attachments from denture base is a major clinical problem. This study is to evaluate the bond strength between PMMA and stainless steel using metal primer and atmospheric pressure plasma jet (APPJ) treatment. Stainless steel discs were treated with Single Bond Universal Adhesive; Palfique Universal Bond; Alloy Primer; heat treatment with Alloy Primer; and 10-s, 20-s, and 30-s APPJ treatment with Alloy Primer. The shear bond strength between PMMA and surface-treated stainless steel was measured using universal testing machine. The effects of N2 flow rate (60, 50, 40, 30 SLM), thermal cycling, and air quenching on shear bond strength were also investigated. The surface of each disc was examined using X-ray photoelectron spectroscopy and a goniometer. Finally, the temperature of plasma with various N2 flow rates was measured and the optical emission spectra of the plasma were measured using spectrometer. Alloy Primer produced the highest bond strength. APPJ treatment was effective at enhancing bond strength by cleaning the surface of contaminants. Moreover, APPJ treatment with air quenching increased surface O2-/OH- and Fe2O3/FeOOH ratios, reducing the negative influence of thermal cycling on bond strength. Alloy Primer with 20 s of APPJ treatment with a 50-SLM N2 flow rate and air quenching was the most effective at increasing bond strength.

Er:YAG laser irradiation enhances bacterial and lipopolysaccharide clearance and human gingival fibroblast adhesion on titanium discs.

To investigate the effect of Er:YAG laser treatment on lipopolysaccharide (LPS) clearance and fibroblast adhesion on titanium disks. Grade IV titanium discs (n = 216) were used and allocated to 6 groups. Group 1 was the negative control without Porphyromonas gingivalis inoculation. Discs in Groups 2-6 were incubated with P. gingivalis to form a biofilm. Group 3 received 0.12% chlorhexidine irrigation and Group 4 received titanium curettage to remove the biofilm. Group 5 was treated with Er:YAG laser irradiation and Group 6 was treated with titanium curettage plus Er:YAG laser irradiation. The contact angle and surface roughness were measured after the various treatments. The surface microstructure and residual bacteria were examined using scanning electron microscopy and confocal laser scanning microscopy, respectively. Residual LPS was examined using a limulus amoebocyte lysate assay and human gingival fibroblast adhesion was quantified using fluorescent microscopy. Curettage plus Er:YAG laser irradiation was the most effective method for removing bacteria and LPS. No significant difference in the amount of fibroblast adhesion was found between the control and Group 6. Combined use of Er:YAG laser irradiation and curettage optimizes LPS clearance and fibroblast adhesion on titanium discs.

Evaluation of root and canal systems of mandibular first molars in Taiwanese individuals using cone-beam computed tomography.

BACKGROUND/PURPOSE: Cone-beam computed tomography (CBCT) can provide valuable data for root canal systems of human teeth. This study used CBCT to evaluate the number of roots and canals in mandibular first molars in Taiwanese individuals. METHODS: We screened 151 patients (76 male and 75 female) scheduled for CBCT scan prior to implantation, or orthodontic, endodontic, or periodontic treatment between June 2006 and March 2009 at the Department of Dentistry, Cardinal Tien Hospital, Taipei, Taiwan. A total of 237 image samples of mandibular first molars were obtained and analyzed for their number of roots and canals. RESULTS: We found that 177 (74.7%) mandibular first molars had two roots and 60 (25.3%) had three roots. Of the 237 teeth, 133 (56.1%) had three canals, 96 (40.5%) had four, and eight (3.4%) had two canals. Of the 86 patients (43 male and 43 female) with bilateral mandibular first molars, 22 (25.6%, 15 male and 7 female) had bilateral three-rooted mandibular first molars, and six (7.0%, 4 male and 2 female) had unilateral three-rooted mandibular first molars. The chi(2) test showed a significantly higher incidence of three-rooted mandibular first molars in male (44.2%, 19/43) than in female (20.9%, 9/43, p = 0.038) subjects. CONCLUSION: Our results showed a high overall incidence (32.6%) of three-rooted mandibular first molars in Taiwanese individuals. CBCT could be a valuable tool for identifying an extra distolingual root in mandibular first molars.

Engineering Antifouling and Antibacterial Stainless Steel for Orthodontic Appliances through Layer-by-Layer Deposition of Nanocomposite Coatings.

In this study, a nanocomposite coating composed of polydopamine, functionalized poly(3,4-ethylenedioxythiophene) (PEDOT), and silver nanoparticles (AgNPs) was synthesized through layer-by-layer deposition. Biomimitic polydopamine and hydroxyl-functionalized PEDOT were used to enhance the adhesion strength. The deposition of PEDOT functionalized with zwitterionic phosphorylcholine can contribute to the antifouling property. After immersion in the AgNO3 solution, Ag+ ions were adsorbed on PEDOT films and further reduced to form AgNPs spontaneously, which conferred antibacterial properties on these nanocomposite films. Escherichia coli and Streptococcus mutans were chosen to represent two common Gram-negative and Gram-positive oral pathogens. We further conducted inductively coupled plasma mass spectrometry to confirm that the Ag+ ions released from these nanocomposite films did not exert adverse effects on the human body. These results suggested that, when applied to stainless steel orthodontic appliances, these durable antifouling and antibacterial coatings may be useful for avoiding bacterial infection.

Core-Shell poly-(D,l-Lactide-co-Glycolide)-chitosan Nanospheres with simvastatin-doxycycline for periodontal and osseous repair.

This study aimed to evaluated the potential of core-shell poly(D,l-lactide-co-glycolide)-chitosan (PLGA-chitosan) nanospheres encapsulating simvastatin (SIM) and doxycycline (DOX) for promoting periodontal and large-sized osseous defects. SIM, and/or DOX were encapsulated in PLGA-chitosan nanospheres using double emulsion technique and were delivered to sites of experimental periodontitis and large-sized mandibular osseous defects of rats for 1-4 weeks. The resultant nanospheres were ~ 200 nm diameter with distinct core-shell structure and released SIM and DOX sustainably for 28 days. DOX and SIM-DOX nanospheres significantly inhibited P. gingivalis and S. sanguinis. In experimental periodontitis sites, SIM-DOX nanospheres significantly down-regulated IL-1b and MMP-8 and significantly reduced bone loss. In mandibular osseous defects, VEGF was up-regulated, and osteogenesis was significantly augmented with SIM nanospheres treatment. In conclusion, core-shell PLGA-chitosan nanospheres released SIM and DOX sustainably. SIM-DOX and SIM nanospheres could be considered to promote the repair of infected periodontal sites and non-infected osseous defects respectively.

A novel polyurethane-based root canal-obturation material and urethane acrylate-based root canal sealer--part I: synthesis and evaluation of mechanical and thermal properties.

Resilon (RealSeal; SybronEndo, Orange, CA) has been developed as an alternative to gutta percha, but its advantages over gutta percha remain controversial. In this study, we developed a novel zinc oxide/thermoplastic polyurethane (ZnO/TPU) composite root canal-filling material and a visible-light curable urethane-acrylate/tripropylene glycol diacrylate (UA/TPGDA) root canal sealer. The mechanical and thermal properties of the ZnO/TPU composite were compared with those of gutta percha and Resilon. Results showed that the tensile strength and elastic modulus of the ZnO/TPU composite were markedly higher than those of gutta percha and Resilon. The melting points of all three materials were similar; however, the enthalpy change and specific heat of ZnO/TPU (9.4 J/g, 0.7 J/g degrees C) were close to those of gutta percha (10.9 J/g, 0.7 J/g degrees C) but lower than those of Resilon (28.9 J/g, 1.3 J/g degrees C). The results indicate that ZnO/TPU composite exhibits better mechanical strength than Resilon, and its combination with UA/TPGDA sealer has excellent potential to be used as a root canal-filling material.

Development of in vitro tooth staining model and usage of catalysts to elevate the effectiveness of tooth bleaching.

OBJECTIVES: Whole blood or tea was frequently used to stain the teeth for measuring the effectiveness of different bleaching materials. However, the components of blood or tea cannot be quantitatively determined and variability might exist among different brands of tea. The purpose of this study was to develop a reproducible in vitro tooth-staining model to simulate the intrinsic discoloration of teeth and evaluate the ability of two catalysts to enhance the bleaching activity of H(2)O(2). METHODS: Rhodamine B, Orange II, Fe(III) phthalocyanine, and tea were used to stain the tooth specimens for 4-72 h and subsequently bleached by H(2)O(2) for 4-72 h. The process was photographed using a digital stereoscopic microscope and a digital camera. The image was transformed to get L*, a*, b* values of CIE Lab system with image processing software. The catalytic ability of light irradiation plus addition of Fe/Sodium-Y or Mn/Sodium-Y for specimens stained by Orange II was evaluated in test tubes and in extracted tooth model. RESULTS: The color of specimens stained by Rhodamine B could not be sufficiently recovered after bleaching by H(2)O(2). In addition, the reaction of Fe(III) phthalocyanine with H(2)O(2) in test tubes was too fast to be monitored. Light activation plus use of Fe/Sodium-Y or Mn/Sodium-Y could significantly accelerate the bleaching efficiency of H(2)O(2). SIGNIFICANCE: Orange II was the most appropriate dye for tooth staining among the dyes used in this study. Addition of Fe/Sodium-Y or Mn/Sodium-Y plus light irradiation could elevate the bleaching efficacy of H(2)O(2) for those specimens stained by Orange II.