Automated multi-attribute method sample preparation using high-throughput buffer exchange tips.

RATIONALE: The multi-attribute method (MAM) has become a valuable mass spectrometry (MS)-based tool that can identify and quantify the site-specific product attributes and purity information for biotherapeutics such as monoclonal antibodies (mAbs) and fusion molecules in recent years. As we expand the use of the MAM at various stages of drug development, it is critical to enhance the sample preparation throughput without additional chemical modifications and variability. METHODS: In this study, a fully automated MAM sample preparation protocol is presented, where rapid desalting in less than 15 minutes is achieved using miniaturized size-exclusion chromatography columns in pipette tips on an automated liquid handler. The peptide samples were analyzed using an electrospray ionization (ESI) orbitrap mass spectrometer coupled to an ultra-high-performance liquid chromatography (UHPLC) system with a dual column switching system. RESULTS: No significant change was observed in product attributes and their quantities compared with manual, low-artifact sample preparation. The sample recovery using the buffer exchange tips was greatly enhanced over the manual spin cartridges while still demonstrating excellent reproducibility for a wide variety of starting sample concentrations. Unlike a plate desalting system, the individual columns provide flexibility in the number of samples prepared at a time and sample locations within plates. CONCLUSIONS: This automated protocol enables the preparation of up to 96 samples with less "at-bench" time than the manual preparation of a smaller batch of samples, thereby greatly facilitating support of process development and the use of the MAM in quality control.

Purification, Characterization, and Structural Studies of a Sulfatase from Pedobacter yulinensis.

Sulfatases are ubiquitous enzymes that hydrolyze sulfate from sulfated organic substrates such as carbohydrates, steroids, and flavones. These enzymes can be exploited in the field of biotechnology to analyze sulfated metabolites in humans, such as steroids and drugs of abuse. Because genomic data far outstrip biochemical characterization, the analysis of sulfatases from published sequences can lead to the discovery of new and unique activities advantageous for biotechnological applications. We expressed and characterized a putative sulfatase (PyuS) from the bacterium Pedobacter yulinensis. PyuS contains the (C/S)XPXR sulfatase motif, where the Cys or Ser is post-translationally converted into a formylglycine residue (FGly). His-tagged PyuS was co-expressed in Escherichia coli with a formylglycine-generating enzyme (FGE) from Mycobacterium tuberculosis and purified. We obtained several crystal structures of PyuS, and the FGly modification was detected at the active site. The enzyme has sulfatase activity on aromatic sulfated substrates as well as phosphatase activity on some aromatic phosphates; however, PyuS did not have detectable activity on 17α-estradiol sulfate, cortisol 21-sulfate, or boldenone sulfate.

In vivo virus-based macrofluorogenic probes target azide-labeled surface glycans in MCF-7 breast cancer cells.

Chemical addressability of viral particles has played a pivotal role in adapting these biogenic macromolecules for various applications ranging from medicine to inorganic catalysis. Cowpea mosaic virus possesses multiple features that are advantageous for the next generation of virus-based nanotechnology: consistent multimeric assemblies dictated by its genetic code, facile large scale production, and lack of observable toxicity in humans. Herein, the chemistry of the viral particles is extended with the use of Cu-free strain-promoted azide-alkyne cycloaddition reaction, or SPAAC reaction. The elimination of Cu, its cocatalyst and reducing agent, simplifies the reaction scheme to a more straightforward approach, which can be directly applied to living systems. As a proof of concept, the viral particles modified with the azadibenzylcyclooctyne functional groups are utilized to trigger and amplify a weak fluorescent signal (azidocoumarin) in live cell cultures to visualize the non-natural sugars. Future adaptations of this platform may be developed to enhance biosensing applications.

Incorporation of automated buffer exchange empowers high-throughput protein and plasmid purification for downstream uses.

The continued acceleration of time-to-market product development and rising demand for biotherapeutics have hastened the need for higher throughput within the biopharmaceutical industry. Automated liquid handlers (ALH) are increasingly popular due to flexible programming that enables processing of multiple samples with an array of functions. This flexibility is useful in streamlining research that requires chromatographic procedures to achieve product purity for downstream analysis. However, purification of biologics often requires additional off-deck buffer exchange steps due to undesirable elution conditions such as high acid or high salt content. Expanding the capability of ALHs to perform purification in sequence with buffer exchange would, therefore, increase workflow efficiency by eliminating the need for manual intervention, thus expediting sample preparation. Here we demonstrate two different automated purifications using pipet-based dispersive solid-phase extraction (dSPE). The first is an affinity purification of His-tagged proteins from bacterial lysate. The second is an anion-exchange purification of plasmid DNA. Both methods are followed by buffer exchange performed by an ALH. Percent recoveries for the three purified recombinant proteins ranged from 51 ± 1.2 to 86 ± 10%. The yields were inversely correlated to starting sample load and protein molecular weight. Yields for plasmid purification ranged between 11.4 ± 0.8 and 13.7 ± 0.9 µg, with the largest plasmid providing the highest yield. Both programs were rapid, with protein purification taking <80 min and plasmid purification <60 min. Our results demonstrate that high-quality, ready-to-use biologics can be obtained rapidly from a crude sample after two separate chromatographic processes without manual intervention.

Multivalent ligand displayed on plant virus induces rapid onset of bone differentiation.

Viruses are monodispersed biomacromolecules with well-defined 3-D structures at the nanometer level. The relative ease to manipulate viral coat protein gene to display numerous functional groups affords an attractive feature for these nanomaterials, and the inability of plant viruses to infect mammalian hosts poses little or no cytotoxic concerns. As such, these nanosized molecular tools serve as powerful templates for many pharmacological applications ranging as multifunctional theranostic agents with tissue targeting motifs and imaging agents, potent vaccine scaffolds to induce cellular immunity and for probing cellular functions as synthetic biomaterials. The results herein show that combination of serum-free, chemically defined media with genetically modified plant virus induces rapid onset of key bone differentiation markers for bone marrow derived mesenchymal stem cells within two days. The xeno-free culture is often a key step toward development of ex vivo implants, and the early onset of osteocalcin, BMP-2 and calcium sequestration are some of the key molecular markers in the progression toward bone formation. The results herein will provide some key insights to engineering functional materials for rapid bone repair.

Porous alginate hydrogel functionalized with virus as three-dimensional scaffolds for bone differentiation.

In regenerative medicine, a synthetic extracellular matrix is crucial for supporting stem cells during its differentiation process to integrate into surrounding tissues. Hydrogels are used extensively in biomaterials as synthetic matrices to support the cells. However, to mimic the biological niche of a functional tissue, various chemical functionalities are necessary. We present here, a method of functionalizing a highly porous hydrogel with functional groups by mixing the hydrogel with a plant virus, tobacco mosaic virus (TMV), and its mutant. The implication of this process resides with the three important features of TMV: its well-defined genetic/chemical modularity, its multivalency (TMV capsid is composed of 2130 copies of identical subunits), and its well-defined structural features. Previous studies utilizing the native TMV on two-dimensional supports accelerated mesenchymal stem cell differentiation, and surfaces modified with genetically modified viral particles further enhanced cell attachment and differentiation. Herein we demonstrate that functionalization of a porous alginate scaffold can be achieved by the addition of viral particles with minimal processing and downstream purifications, and the cell attachment and differentiation within the macroporous scaffold can be effectively manipulated by altering the peptide or small molecule displayed on the viral particles.

Mutant plant viruses with cell binding motifs provide differential adhesion strengths and morphologies.

The ability of Tobacco mosaic virus (TMV) to tolerate various amino acid insertions near its carboxy terminus is well-known. Typically these inserts are based on antigenic sequences for vaccine development with plant viruses as carriers. However, we determined that the structural symmetries and the size range of the viruses could also be modeled to mimic the extracellular matrix proteins by inserting cell-binding sequences to the virus coat protein. The extracellular matrix proteins play important roles in guiding cell adhesion, migration, proliferation, and stem cell differentiation. Previous studies with TMV demonstrated that the native and phosphate-modified virus particles enhanced stem cell differentiation toward bone-like tissues. Based on these studies, we sought to design and screen multiple genetically modified TMV mutants with reported cell adhesion sequences to expand the virus-based tools for cell studies. Here, we report the design of these mutants with cell binding amino acid motifs derived from several proteins, the stabilities of the mutants against proteases during purification and storage, and a simple and rapid functional assay to quantitatively determine adhesion strengths by centrifugal adhesion assay. Among the mutants, we found that cells on TMV expressing RGD motifs formed filopodial extensions with weaker attachment profiles, whereas the cells on TMV expressing collagen I mimetic sequence displayed little spreading but higher attachment strengths.

Thermally controlled release of anticancer drug from self-assembled γ-substituted amphiphilic poly(ε-caprolactone) micellar nanoparticles.

A thermo-responsive poly{γ-2-[2-(2-methoxyethoxy)ethoxy]ethoxy-ε-caprolactone}-b-poly(γ-octyloxy-ε-caprolactone) (PMEEECL-b-POCTCL) diblock copolymer was synthesized by ring-opening polymerization using tin octanoate (Sn(Oct)(2)) catalyst and a fluorescent dansyl initiator. The PMEEECL-b-POCTCL had a lower critical solution temperature (LCST) of 38 °C, and it was employed to prepare thermally responsive micelles. Nile Red and Doxorubicin (DOX) were loaded into the micelles, and the micellar stability and drug carrying ability were investigated. The size and the morphology of the cargo-loaded micelles were determined by DLS, AFM, and TEM. The Nile-Red-loaded polymeric micelles were found to be stable in the presence of both fetal bovine serum and bovine serum albumin over a 72 h period and displayed thermo-responsive in vitro drug release. The blank micelles showed a low cytotoxicity. As comparison, the micelles loaded with DOX showed a much higher in vitro cytotoxicity against MCF-7 human breast cancer cell line when the incubation temperature was elevated above the LCST. Confocal laser scanning microscopy was used to study the cellular uptake and showed that the DOX-loaded micelles were internalized into the cells via an endocytosis pathway.

Factors Compromising Glucuronidase Performance in Urine Drug Testing Potentially Resulting in False Negatives.

Next generation ß-glucuronidases can effectively cleave glucuronides in urine at room temperature. However, during the discovery studies, additional challenges were identified for urine drug testing across biologically relevant pH extremes and patient urine specimens. Different enzymes were evaluated across clinical urine specimens and commercially available urine control matrices. Each enzyme shows distinct substrate preferences, pH optima, and variability across clinical specimens. These results demonstrate how reliance on a single glucuronidated substrate as the internal hydrolysis control cannot ensure performance across a broader panel of analytes. Moreover, sample specific urine properties compromise ß-glucuronidases to varying levels, more pronounced for some enzymes, and thereby lower the recovery of some drug analytes in an enzyme-specific manner. A minimum of 3-fold dilution of urine with buffer yields measurable improvements in achieving target pH and reducing the impact of endogenous compounds on enzyme performance. After subjecting the enzymes to pH extremes and compromising chemicals, one particular ß-glucuronidase was identified that addressed many of these challenges and greatly lower the risk of failed hydrolyses. In summary, we present strategies to evaluate glucuronidases that aid in higher accuracy urine drug tests with lower potential for false negatives.

Chemoselective modification of turnip yellow mosaic virus by Cu(I) catalyzed azide-alkyne 1,3-dipolar cycloaddition reaction and its application in cell binding.

Turnip yellow mosaic virus (TYMV) is an icosahedral plant virus with a diameter of 28-30 nm that can be isolated in gram quantities from turnip or Chinese cabbage inexpensively. In this study, TYMV combined with spatially addressable surface chemistries was selected as a prototype bionanoparticle for modulating patterns of cell adhesion, morphology, and proliferation. We exploited the chemical reactivity of TYMV using the mild conditions of Cu(I) catalyzed azide-alkyne cycloaddition (CuAAC) reaction, the best example of "click" chemistry. Oligo-ethylene glycol (OEG) short chain, coumarintriazole, and RGD-containing peptide were grafted on the surface of TYMV via carbodiimide activation and CuAAC reaction. The bioconjugation to intact viral particles was confirmed by MS, TEM, FPLC, and SDS-PAGE with fluorescence visualization analysis. Therefore, this method is a generally useful means of incorporating various types of functionalities onto the TYMV surface. Further studies were done to learn the behavior of NIH-3T3 fibroblast cells on the modified or unmodified TYMV surfaces. OEG-modified TYMV surfaces retarded cell attachment and growth, while cell adhesion, spreading, and proliferation were dramatically enhanced on RGD-modified TYMV surfaces. Compared with RGD immobilized 3-aminopropyltriethoxysilane-coated glass surface, the cells are more ready to spread fully and proliferate on TYMV-RGD coated surface, which thus provides a more cell-friendly environment with nanometer-scale surface features. This illustrates the potential application of plant virus based materials in tissue engineering, drug delivery, and biosensing.

Visualizing cell extracellular matrix (ECM) deposited by cells cultured on aligned bacteriophage M13 thin films.

Topographical features ranging from micro- to nanometers can affect cell orientation and migratory pathways, which are important factors in tissue engineering and tumor migration. In our previous study, a convective assembly of bacteriophage M13 resulted in thin films which could be used to control the alignment of cells. However, several questions regarding its underlying reasons to dictate cell alignment remained unanswered. Here, we further study the nanometer topographical features generated by the bacteriophage M13 crystalline film, which results in the alignment of the cells and extracellular matrix (ECM) proteins. Sequential imaging analyses at micro- and nanoscale levels of aligned cells and fibrillar matrix proteins were documented using scanning electron microscopy and immunofluorescence microscopy. As a result, we observed baby hamster kidney cells with higher degree of alignment on the ordered M13 substrates than NIH-3T3 fibroblasts, a difference which could be attributed to the intrinsic nature of the cells' production of ECM proteins. The results from this study provide a crucial insight into the topographical features of a biological thin film, which can be utilized to control the orientation of cells and surrounding ECM proteins.

Altering the landscape of viruses and bionanoparticles.

In recent years, protein-based nanoparticles or bionanoparticles (BNPs), have been used as primary building blocks to generate ornate nanomaterials for a wide-range of applications. Over the past fifty years, numerous BNPs have been chemically modified or genetically engineered to function as smart drug/gene delivery vehicles, advanced vaccine vehicles, and isolated reaction vessels for inorganic, metallic, and semi-conductive depositions. These studies have contributed invaluable insights to the expansive capabilities of these simple, yet highly robust, nanosized building materials. Here we highlight some of the recent progress in the chemical modifications of BNPs and hopefully inspire the development of many new materials in the near future.

Enhancing the multi-attribute method through an automated and high-throughput sample preparation.

The multi-attribute method (MAM), a recent advance in the application of liquid chromatography-mass spectrometry within the pharmaceutical industry, enables the simultaneous monitoring of multiple product quality attributes in a single analytical method. While MAM is coupled with automated data processing and reporting, the sample preparation, based on proteolytic peptide mapping, remains cumbersome and low throughput. The standard sample preparation for MAM relies on protein denaturation, reduction, and alkylation prior to proteolytic digestion, but often a desalting step is required to maintain enzymatic activity. While most of the sample preparation can be automated on a standard robotic liquid handling system, a streamlined approach for protein desalting and temperature modulation is required for a viable, fully automated digestion. In this work, for the first time, a complete tip-based MAM sample preparation is automated on a single robotic liquid handling system, leveraging a deck layout that integrates both heating and cooling functionalities. The fully automated method documented herein achieves a high-throughput sample preparation for MAM, while maintaining superior method performance.Abbreviations: MAM: multi-attribute method; PQAs: product quality attributes; CE: capillary electrophoresis; IEX: ion-exchange chromatography; HILIC-FLR: hydrophilic interaction liquid chromatography coupled to a fluorescence detector; RP-LC/UV: reversed-phase liquid chromatography coupled to a UV detector; MS: mass spectrometry; NPD: new peak detection; GdnHCl: guanidine hydrochloride; TIC: total ion current; pAb: polyclonal antibody; IgG: immunoglobulin G; DTT: dithiothreitol; IAA: iodoacetic acid; TFA: trifluoroacetic acid; A280: absorbance at 280 nm wavelength; 96MPH: 96-channel multi-probe head; CPAC: Cold Plate Air Cooled; HHS: Hamilton Heater Shaker; DWP: Deep-Well Plate; PCR: Polymerase Chain Reaction; NTR: Nested Tip Rack; Met: methionine; Trp: tryptophan; N-term pQ: N-terminal glutamine cyclization; Lys: lysine; PAM: peptidylglycine α-amidating monooxygenase; G0F: asialo-, agalacto-, bi-antennary, core substituted with fucose; G1F: asialo-, mono-galactosylated bi-antennary, core substituted with fucose; G2F: asialo-, bi-galactosylated bi-antennary, core substituted with fucose; G0: asialo-, agalacto-, bi-antennary; Man5: oligomannose 5; Man8: oligomannose 8; TriF: asialo-, tri-galactosylated tri-antennary, core substituted with fucose.

Variants of glycosyl hydrolase family 2 ß-glucuronidases have increased activity on recalcitrant substrates.

Glucuronidated drug metabolites can be quantified from urine samples by first hydrolyzing conjugates with ß-glucuronidase (ß-GUS) and then separating free drug molecules by liquid chromatography and mass spectrometry detection (LC-MS). To improve the activity and specificity of various ß-GUS, we designed enzyme chimeras and generated site-saturation variants based on structural analyses, then screened them for improved activity on drug metabolites important to clinical and forensic drug-testing laboratories. Often, an increase of activity on one substrate of interest was countered by loss of activity against another, and there was no strong correlation of activity on standard ß-glucuronidase substrates to activity on recalcitrant drug glucuronides. However, we discovered a chimera of two enzymes from different species of Aspergillus that displays a 27 % increase in activity on morphine-3-glucuronide than the parent proteins. Furthermore, mutations in the M-loop, which is a loop near the active site, resulted in numerous variants with dramatically increased rates of hydrolysis on drug glucuronides. Specifically, the M-loop variant Q451D/A452E of a ß-GUS from Brachyspira pilosicoli has a 50-fold and 25-fold increase in activity on the recalcitrant substrates codeine-6-glucuronide and dihydrocodeine-6-glucuronide, respectively, compared to the parent enzyme.

Parallel sample processing using dispersive INtip micro-purification on programmable multichannel pipettes.

Automation gives researchers the ability to process and screen orders of magnitude higher numbers of samples than manual experimentation. Current biomacromolecule separation methodologies suffer from necessary manual intervention, making their translation to high-throughput automation difficult. Herein, we present the first characterization of biomacromolecule affinity purification via dispersive solid-phase extraction in a pipette tip (INtip). We use commercially available resin and compare efficiency with batch and spin column methodologies. Moreover, we measure the kinetics of binding and evaluate resin binding capacities. INtip technology is effective on, and scalable for, an automated platform (INTEGRA ASSIST). The results suggest that high-throughput biomolecular workflows will benefit from the integration of INtip separations.

Automating Complex, Multistep Processes on a Single Robotic Platform to Generate Reproducible Phosphoproteomic Data.

Mass spectrometry-based phosphoproteomics holds promise for advancing drug treatment and disease diagnosis; however, its clinical translation has thus far been limited. This is in part due to an unstandardized and segmented sample preparation process that involves cell lysis, protein digestion, peptide desalting, and phosphopeptide enrichment. Automating this entire sample preparation process will be key in facilitating standardization and clinical translation of phosphoproteomics. While peptide desalting and phosphopeptide enrichment steps have been individually automated, integrating these two extractions and, further, the entire process requires more advanced robotic platforms as well as automation-friendly extraction tools. Here we describe a fully automated peptide desalting and phosphopeptide enrichment method using IMCStips on a Hamilton STAR. Using our established automated method, we identified more than 10,000 phosphopeptides from 200 µg of HCT116 cell lysate without fractionation with >85% phosphopeptide specificities. Compared with titania-based Spin Tip products, the automated IMCStips-based method gave 50% higher phosphopeptide identifications. The method reproducibility was further assessed using multiple reaction monitoring (MRM) to show >50% phosphopeptide recoveries after the automated phosphopeptide extraction with coefficients of variation (CVs) of <20% over a 3-week period. The established automated method is a step toward standardization of the sample preparation of phosphopeptide samples and could be further expanded upon to create a fully automated "cells to phosphopeptides" method.

Comparison of Purified ß-glucuronidases in Patient Urine Samples Indicates a Lack of Correlation Between Enzyme Activity and Drugs of Abuse Metabolite Hydrolysis Efficiencies Leading to Potential False Negatives.

Pain management laboratories analyze biological fluids (urine, saliva or blood) from patients treated for chronic pain to ensure compliance and to detect undisclosed drug use. The quantitation of multi-panel drugs in urine and tissues utilizes ß-glucuronidase to cleave the glucuronic acid and liberate the parent drug for mass spectrometry analysis. This work focuses on the comparison of three different, purified and commercially available ß-glucuronidases across 83 patient urine samples. One enzyme is genetically modified, expressed in bacteria and the other two enzymes are purified from abalone. The results indicate that the source of ß-glucuronidase plays an important role in substrate specificity which in turn dictates hydrolysis efficiency. Contaminants in the enzyme solutions also interfere with analyte detection. Altogether, these factors impact precision and accuracy of data interpretation, leading up to 13% positive/negative disagreement.

Oriented cell growth on self-assembled bacteriophage M13 thin films.

Fibrillar M13 bacteriophages were used as basic building blocks to generate thin films with aligned nanogrooves, which, upon chemical grafting with RGD peptides, guide cell alignment and orient the cell outgrowth along defined directions.

Increased activity of ß-glucuronidase variants produced by site-directed mutagenesis.

ß-glucuronidase (BGus) is an essential glycosyl hydrolase which has been widely used in biological and biomedical applications. In this paper, we report the construction and screening of nineteen Escherichia coli BGus (EBGus) mutants using site-directed mutagenesis. The mutants G559N, G559S and G559T showed a 3-5 fold increase in enzyme activity in comparison to wild type EBGus. In particular, G559S, with the highest activity, showed 2-6 fold enhanced activity compared to abalone and snail BGus extracts. Moreover, the glycine to serine mutagenesis for the same site in Staphylococcus sp. RLH1 BGus (StBGus) exhibited significantly enhanced activity, which indicated the importance of the G559→S mutation on BGus function. Based on this structural analysis, we postulate that the mutation at G559 plays an important role in the stabilization of the enzyme conformation, and thereby facilitates the effective binding of substrate.