RESUMEN
A low-voltage and low-power true single-phase flip-flop that minimum the total transistor count by using the pass transistor logic circuit scheme is proposed in this paper. Optimization measures lead to a new flip-flop design with better various performances such as speed, power, energy, and layout area. Based on post-layout simulation results using the TSMC CMOS 180 nm and 90 nm technologies, the proposed design achieves the conventional transmission-gate-based flip-flop design with a 53.6% reduction in power consumption and a 63.2% reduction in energy, with 12.5% input data switching activity. In order to further the performance parameters of the proposed design, a shift-register design has been realized. Experimental measurements at 0.5 V/0.5 MHz show that this proposed design reduces power consumption by 47.3% while achieving a layout area reduction of 30.5% compared to the conventional design.
RESUMEN
An innovative and stable PNN based 10-transistor (10T) static random-access memory (SRAM) architecture has been designed for low-power bit-cell operation and sub-threshold voltage applications. The proposed design belongs to the following features: (a) pulse control based read-assist circuit offers a dynamic read decoupling approach for eliminating the read interference; (b) we have utilized the write data-aware techniques to cut off the pull-down path; and (c) additional write current has enhanced the write capability during the operation. The proposed design not only solves the half-selected problems and increases the read static noise margin (RSNM) but also provides low leakage power performance. The designed architecture of 1-Kb SRAM macros (32 rows × 32 columns) has been implemented based on the TSMC-40 nm GP CMOS process technology. At 300 mV supply voltage and 10 MHz operating frequency, the read and write power consumption is 4.15 µW and 3.82 µW, while the average energy consumption is only 0.39 pJ.