RESUMEN
Maneuver of conducting polymers (CPs) into lightweight hydrogels can improve their functional performances in energy devices, chemical sensing, pollutant removal, drug delivery, etc. Current approaches for the manipulation of CP hydrogels are limited, and they are mostly accompanied by harsh conditions, tedious processing, compositing with other constituents, or using unusual chemicals. Herein, a two-step route is introduced for the controllable fabrication of CP hydrogels in ambient conditions, where gelation of the shape-anisotropic nano-oxidants followed by in-situ oxidative polymerization leads to the formation of polyaniline (PANI) and polypyrrole hydrogels. The method is readily coupled with different approaches for materials processing of PANI hydrogels into varied shapes, including spherical beads, continuous wires, patterned films, and free-standing objects. In comparison with their bulky counterparts, lightweight PANI items exhibit improved properties when those with specific shapes are used as electrodes for supercapacitors, gas sensors, or dye adsorbents. The current study therefore provides a general and controllable approach for the implementation of CP into hydrogels of varied external shapes, which can pave the way for the integration of lightweight CP structures with emerging functional devices.
RESUMEN
Conductive composites based on thermosetting resins have broad applications in various fields. In this paper, a new self-compositing strategy is developed for improving the conductivity of graphene nanoplatelet/thermosetting resin composites by optimizing the transport channels. To implement this strategy, conventional graphene nanoplatelet/thermosetting resin is crushed into micron-sized composite powders, which are mixed with graphene nanoplatelets to form novel complex fillers to prepare the self-composited materials with thermosetting resins. A highly conductive compact graphene layer is formed on the surface of the crushed composite powders, while the addition of the micron-sized powder induces the orientation of graphene nanoplatelets in the resin matrix. Therefore, a highly conductive network is constructed inside the self-composited material, significantly enhancing the electrical conductivity. The composite materials based on epoxy resin, cyanate resin, and unsaturated polyester are prepared with this method, reflecting that the method is universal for preparing composites based on thermosetting resins. The highest electrical conductivity of the self-composited material based on unsaturated polyester is as high as 25.9 S m-1 . This self-compositing strategy is simple, efficient, and compatible with large-scale industrial production, thus it is a promising and general way to enhance the conductivity of thermosetting resin matrix composites.
RESUMEN
Porous materials with multiple hierarchy levels can be useful as lightweight engineering structures, biomedical implants, flexible functional devices, and thermal insulators. Numerous routes have integrated bottom-up and top-down approaches for the generation of engineering materials with lightweight nature, complex structures, and excellent mechanical properties. It nonetheless remains challenging to generate ultralight porous materials with hierarchical architectures and multi-functionality. Here, the combined strategy based on Pickering emulsions and additive manufacturing leads to the development of ultralight conducting polymer foams with hierarchical pores and multifunctional performance. Direct writing of the emulsified inks consisting of the nano-oxidant-hydrated vanadium pentoxide nanowires-generated free-standing scaffolds, which are stabilized by the interfacial organization of the nanowires into network structures. The following in situ oxidative polymerization transforms the nano-oxidant scaffolds into foams consisting of a typical conducting polymer-polyaniline. The lightweight polyaniline foams featured by hierarchical pores and high surface areas show excellent performances in the applications of supercapacitor electrodes, planar micro-supercapacitors, and gas sensors. This emerging technology demonstrates the great potential of a combination of additive manufacturing with complex fluids for the generation of functional solids with lightweight nature and adjustable structure-function relationships.
RESUMEN
Materials exhibiting persistent luminescence (PersL) have great prospect in optoelectronic and biomedical applications such as optical information storage, bio-imaging, and so on. Unfortunately, PersL materials with multimode emission properties have been rarely reported, although they are expected to be very desirable in multilevel anti-counterfeiting and encryption applications. Herein, Cr3+ -doped zinc aluminum germanium (ZAG:Cr) nanoparticles exhibiting triple-mode emissions are designed and demonstrated. Upon exposure to steady 254 nm UV light, the ZAG:Cr nanoparticles yield steady bluish-white emission. After turning off the UV light, the emission disappears quickly and the mode switches to transient near-infrared (NIR) PersL emission at predominantly 690 nm. The transient NIR PersL emission which arises from Cr3+ is induced by non-equivalent substitution of Ge4+ . After persisting for 50 min, it can be retriggered by 980 nm photons due to the continuous trap depth distribution of ZAG:Cr between 0.65 and 1.07 eV. Inspired by the triple-mode emissions from ZAG:Cr, multifunctional luminescent inks composed of ZAG:Cr nanoparticles are prepared, and high-security labeling and encoding encryption properties are demonstrated. The results indicate that ZAG:Cr nanoparticles have great potential in anti-counterfeiting and encryption applications, and the strategy and concept described here provide insights into the design of advanced anti-counterfeiting materials.
RESUMEN
Simultaneously achieving high mass loading and superior rate capability in electrodes is challenging due to their often mutually constrained nature, especially for pseudocapacitors for high-power density applications. Here, we report a robust porous polyaniline hydrogel (PPH) prepared using a facile ice-templated in situ polymerization approach. Owing to the conductive, robust, and porous nanostructures suitable for ultrafast electron and ion transport, the self-supporting pure polyaniline hydrogel electrode exhibits superior areal capacitance without sacrificing rate capability and gravimetric capacitance at an ultrahigh mass loading and notable current density. It achieves a high areal capacitance (15.2 F·cm-2 at 500 mA·cm-2) and excellent rate capability (~92.7% retention from 20 to 500 mA·cm-2) with an ultrahigh mass loading of 43.2 mg cm-2. Our polyaniline hydrogel highlights the potential of designing porous nanostructures to boost the performance of electrode materials and inspires the development of other ultrafast pseudocapacitive electrodes with ultrahigh loadings and fast charge/discharge capabilities.
RESUMEN
3D printing of liquid metal remains a big challenge due to its low viscosity and large surface tension. In this study, we use Carbopol hydrogel and liquid gallium-indium alloy to prepare a liquid metal high internal phase emulsion gel ink, which can be used for direct-ink-writing 3D printing. The high volume fraction (up to 82.5%) of the liquid metal dispersed phase gives the ink excellent elastic properties, while the Carbopol hydrogel, as the continuous phase, provides lubrication for the liquid metal droplets, ensuring smooth flow of the ink during shear extrusion. These enable high-resolution and shape-stable 3D printing of three-dimensional structures. Moreover, the liquid metal droplets exhibit an electrocapillary phenomenon in the Carbopol hydrogel, which allows for demulsification by an electric field and enables electrical connectivity between droplets. We have also achieved the printing of ink on flexible, non-planar structures, and demonstrated the potential for alternating printing with various materials.
RESUMEN
In the present study, surface properties of three types of carbon fibers (CCF300, CCM40J, and CCF800H) on the interface properties of carbon fiber/epoxy resin (CF/EP) were analyzed. The composites are further modified by graphene oxide (GO) to obtain GO/CF/EP hybrid composites. Meanwhile, the effect of the surface properties of CFs and the additive graphene oxide on the interlaminar shear properties and dynamic thermomechanical properties of GO/CF/EP hybrid composites are also analyzed. The results show that the higher surface oxygen-carbon ratio of carbon fiber (CCF300) has a positive effect on improving the glass transition temperature (Tg) of the CF/EP composites. The Tg of CCF300/EP is 184.4 °C, while the Tg of CCM40J/EP and CCF800/EP are only 177.1 °C and 177.4 °C, respectively. Furthermore, deeper and more dense grooves on the fiber surface (CCF800H and CCM40J) are more conducive to improving the interlaminar shear performance of the CF/EP composites. The interlaminar shear strength (ILSS) of CCF300/EP is 59.7 MPa, and that of CCM40J/EP and CCF800H/EP are 80.1 MPa and 83.5 MPa, respectively. For the GO/CF/EP hybrid composites, graphene oxide with abundant oxygen-containing groups is beneficial to improve the interfacial interaction. Graphene oxide can significantly improve the glass transition temperature and interlamellar shear strength of GO/CCF300/EP composites fabricated by CCF300 with a higher surface oxygen-carbon ratio. For the CCM40J and CCF800H with lower surface oxygen-carbon ratio, graphene oxide has a better modification effect on the glass transition temperature and interlamellar shear strength of GO/CCM40J/EP composites fabricated by CCM40J with deeper and finer surface grooves. Regardless of the type of carbon fiber, the GO/CF/EP hybrid composites with 0.1% graphene oxide have the optimized interlaminar shear strength, and the GO/CF/EP hybrid composites with 0.5% graphene oxide have the maximum glass transition temperature.
RESUMEN
We report a rapid synthesis method for producing CsSnCl3:Mn2+ perovskites, derived from SnF2, and investigate the effects of rapid thermal treatment on their photoluminescence properties. Our study shows that the initial CsSnCl3:Mn2+ samples exhibit a double luminescence peak structure with PL peaks at approximately 450 nm and 640 nm, respectively. These peaks originate from defect-related luminescent centers and the 4T1â6A1 transition of Mn2+. However, as a result of rapid thermal treatment, the blue emission is significantly reduced and the red emission intensity is increased nearly twofold compared to the pristine sample. Furthermore, the Mn2+-doped samples demonstrate excellent thermal stability after the rapid thermal treatment. We suggest that this improvement in photoluminescence results from enhanced excited-state density, energy transfer between defects and the Mn2+ state, as well as the reduction of nonradiative recombination centers. Our findings provide valuable insights into the luminescence dynamics of Mn2+-doped CsSnCl3 and open up new possibilities for controlling and optimizing the emission of rare-earth-doped CsSnCl3.
RESUMEN
The effect of a-SiCxNy:H encapsulation layers, which are prepared using the very-high-frequency plasma-enhanced chemical vapor deposition (VHF-PECVD) technique with SiH4, CH4, and NH3 as the precursors, on the stability and photoluminescence of CsPbBr3 quantum dots (QDs) were investigated in this study. The results show that a-SiCxNy:H encapsulation layers containing a high N content of approximately 50% cause severe PL degradation of CsPbBr3 QDs. However, by reducing the N content in the a-SiCxNy:H layer, the PL degradation of CsPbBr3 QDs can be significantly minimized. As the N content decreases from around 50% to 26%, the dominant phase in the a-SiCxNy:H layer changes from SiNx to SiCxNy. This transition preserves the inherent PL characteristics of CsPbBr3 QDs, while also providing them with long-term stability when exposed to air, high temperatures (205 °C), and UV illumination for over 600 days. This method provided an effective and practical approach to enhance the stability and PL characteristics of CsPbBr3 QD thin films, thus holding potential for future developments in optoelectronic devices.
RESUMEN
Multi-band emission luminescence materials are of great significance owing to their extensive application in diverse fields. In this research, we successfully prepared a series of Pr3+-doped Ca3Al2O6 multi-band emission phosphors via a high-temperature solid-state method. The phase structure, morphology, luminescence spectra and decay curves were investigated in detail. The Ca3Al2O6:Pr3+ phosphors can absorb blue lights and emit lights in the 450-750 nm region, and typical emission bands are located at 488 nm (blue), 525-550 nm (green), 611-614 nm (red), 648 nm (red) and 733 nm (deep red). The influence of the Pr3+ doping concentration was discussed, and the optimal Pr3+ doping concentration was determined. The impacts of charge compensator ions (Li+, Na+, and K+) on the luminescence of Pr3+ were also investigated, and it was found that all the charge compensator ions contributed positively to the emission intensity. More importantly, the emission intensity of the as-prepared phosphors at 423 K can still maintain 65-70% of that at room temperature, and the potential application for pc-LED was investigated. The interesting results indicate that the prepared phosphors may serve multifunctional and advanced applications.
RESUMEN
The enhanced red photoluminescence (PL) from Si-rich amorphous silicon carbide (a-SiCx) films was analyzed in this study using nitrogen doping. The increase in nitrogen doping concentration in films results in the significant enhancement of PL intensity by more than three times. The structure and bonding configuration of films were investigated using Raman and Fourier transform infrared absorption spectroscopies, respectively. The PL and analysis results of bonding configurations of films suggested that the enhancement of red PL is mainly caused by the reduction in nonradiative recombination centers as a result of the weak Si-Si bonds substituted by Si-N bonds.
RESUMEN
3D printing of commercial thermosetting epoxy resin is of great significance for the rapid and low-cost construction of high-strength objects with complex structures. Meanwhile, recycling these commercial epoxy resins is essential for environmental protection and sustainable development. This paper reports direct ink writing 3D printing of a multifunctional composite material based on commercial bisphenol A epoxy resin and a 3D printing compatible technique to recycle the printed composite material. Graphene nanoplatelet is designed as an efficient functional thixotropic additive that turns the liquid epoxy resin prepolymer shear-thinning and suitable for direct ink printing. Composite materials with high resolution and high mechanical strength are printed with epoxy resin/graphene nanoplatelet inks, and they also show high thermal and electrical conductivity and fast thermo-induced shape memory response. The printed objects can be recycled by comminuting them into micropowders, which are then used as a thixotropic agent to prepare recycled DIW ink. The physical properties of the materials printed with recycled inks maintain unchanged for successive four recycling cycles. The graphene nanoplatelets at the surface of recycled comminuted powder are found to modulate the surface energy of the powder, thus making the powder able to serve as a thixotropic agent for the recycled inks. The method here provides a new solution to process commercial epoxy resin and opens a new direction to the more sustainable use of thermosetting plastics.
RESUMEN
The influence of N incorporation on the optical properties of Si-rich a-SiCx films deposited by very high-frequency plasma-enhanced chemical vapor deposition (VHF PECVD) was investigated. The increase in N content in the films was found to cause a remarkable enhancement in photoluminescence (PL). Relative to the sample without N incorporation, the sample incorporated with 33% N showed a 22-fold improvement in PL. As the N content increased, the PL band gradually blueshifted from the near-infrared to the blue region, and the optical bandgap increased from 2.3 eV to 5.0 eV. The enhancement of PL was suggested mainly from the effective passivation of N to the nonradiative recombination centers in the samples. Given the strong PL and wide bandgap of the N incorporated samples, they were used to further design an anti-counterfeiting label.
RESUMEN
Luminescent amorphous silicon nitride-containing dense Si nanodots were prepared by using very-high-frequency plasma-enhanced chemical vapor deposition at 250 °C. The influence of thermal annealing on photoluminescence (PL) was studied. Compared with the pristine film, thermal annealing at 1000 °C gave rise to a significant enhancement by more than twofold in terms of PL intensity. The PL featured a nanosecond recombination dynamic. The PL peak position was independent of the excitation wavelength and measured temperatures. By combining the Raman spectra and infrared absorption spectra analyses, the enhanced PL was suggested to be from the increased density of radiative centers related to the Si dangling bonds (K0) and N4+ or N20 as a result of bonding configuration reconstruction.
RESUMEN
The effect of nitrogen doping on the photoluminescence (PL) of amorphous SiCxOy films was investigated. An increase in the content of nitrogen in the films from 1.07% to 25.6% resulted in red, orange-yellow, white, and blue switching PL. Luminescence decay measurements showed an ultrafast decay dynamic with a lifetime of ~1 ns for all the nitrogen-doped SiCxOy films. Nitrogen doping could also widen the bandgap of SiCxOy films. The microstructure and the elemental compositions of the films were studied by obtaining their Raman spectra and their X-ray photoelectron spectroscopy, respectively. The PL characteristics combined with an analysis of the chemical bonds configurations present in the films suggested that the switching PL was attributed to the change in defect luminescent centers resulting from the chemical bond reconstruction as a function of nitrogen doping. Nitrogen doping provides an alternative route for designing and fabricating tunable and efficient SiCxOy-based luminescent films for the development of Si-based optoelectronic devices.