Vascular smooth muscle cell-specific miRNA-214 deficiency alleviates simulated microgravity-induced vascular remodeling.

The human cardiovascular system has evolved to accommodate the gravity of Earth. Microgravity during spaceflight has been shown to induce vascular remodeling, leading to a decline in vascular function. The underlying mechanisms are not yet fully understood. Our previous study demonstrated that miR-214 plays a critical role in angiotensin II-induced vascular remodeling by reducing the levels of Smad7 and increasing the phosphorylation of Smad3. However, its role in vascular remodeling evoked by microgravity is not yet known. This study aimed to determine the contribution of miR-214 to the regulation of microgravity-induced vascular remodeling. The results of our study revealed that miR-214 expression was increased in the forebody arteries of both mice and monkeys after simulated microgravity treatment. In vitro, rotation-simulated microgravity-induced VSMC migration, hypertrophy, fibrosis, and inflammation were repressed by miR-214 knockout (KO) in VSMCs. Additionally, miR-214 KO increased the level of Smad7 and decreased the phosphorylation of Smad3, leading to a decrease in downstream gene expression. Furthermore, miR-214 cKO protected against simulated microgravity induced the decline in aorta function and the increase in stiffness. Histological analysis showed that miR-214 cKO inhibited the increases in vascular medial thickness that occurred after simulated microgravity treatment. Altogether, these results demonstrate that miR-214 has potential as a therapeutic target for the treatment of vascular remodeling caused by simulated microgravity.

Comparative analysis of brain age prediction using structural and diffusion MRIs in neonates.

Using machine learning techniques to predict brain age from multimodal data has become a crucial biomarker for assessing brain development. Among various types of brain imaging data, structural magnetic resonance imaging (sMRI) and diffusion magnetic resonance imaging (dMRI) are the most commonly used modalities. sMRI focuses on depicting macrostructural features of the brain, while dMRI reveals the orientation of major white matter fibers and changes in tissue microstructure. However, their differential capabilities in reflecting newborn age and clinical implications have not been systematically studied. This study aims to explore the impact of sMRI and dMRI on brain age prediction. Comparing predictions based on T2-weighted(T2w) and fractional anisotropy (FA) images, we found their mean absolute errors (MAE) in predicting infant age to be similar. Exploratory analysis revealed for T2w images, areas such as the cerebral cortex and ventricles contribute most significantly to age prediction, whereas FA images highlight the cerebral cortex and regions of the main white matter tracts. Despite both modalities focusing on the cerebral cortex, they exhibit significant region-wise differences, reflecting developmental disparities in macro- and microstructural aspects of the cortex. Additionally, we examined the effects of prematurity, gender, and hemispherical asymmetry of the brain on age prediction for both modalities. Results showed significant differences (p<0.05) in age prediction biases based on FA images across gender and hemispherical asymmetry, whereas no significant differences were observed with T2w images. This study underscores the differences between T2w and FA images in predicting infant brain age, offering new perspectives for studying infant brain development and aiding more effective assessment and tracking of infant development.

The effect of preterm birth on thalamic development based on shape and structural covariance analysis.

Acting as a central hub in regulating brain functions, the thalamus plays a pivotal role in controlling high-order brain functions. Considering the impact of preterm birth on infant brain development, traditional studies focused on the overall development of thalamus other than its subregions. In this study, we compared the volumetric growth and shape development of the thalamic hemispheres between the infants born preterm and full-term (Left volume: P = 0.027, Left normalized volume: P < 0.0001; Right volume: P = 0.070, Right normalized volume: P < 0.0001). The ventral nucleus region, dorsomedial nucleus region, and posterior nucleus region of the thalamus exhibit higher vulnerability to alterations induced by preterm birth. The structural covariance (SC) between the thickness of thalamus and insula in preterm infants (Left: corrected P = 0.0091, Right: corrected P = 0.0119) showed significant increase as compared to full-term controls. Current findings suggest that preterm birth affects the development of the thalamus and has differential effects on its subregions. The ventral nucleus region, dorsomedial nucleus region, and posterior nucleus region of the thalamus are more susceptible to the impacts of preterm birth.

Atomic Molybdenum Nanomaterials for Electrocatalysis.

As a sustainable energy technology, electrocatalytic energy conversion requires electrocatalysts, which greatly motivates the exploitation of high-performance electrocatalysts based on nonprecious metals. Molybdenum-based nanomaterials have demonstrated promise as electrocatalysts because of their unique physiochemical and electronic properties. Among them, atomic Mo catalysts, also called Mo-based single-atom catalysts (Mo-SACs), have the most accessible active sites and tunable microenvironments and are thrivingly explored in various electrochemical conversion reactions. A timely review of such rapidly developing topics is necessary to provide guidance for further exploration of optimized Mo-SACs toward electrochemical energy technologies. In this review, recent advances in the synthetic strategies for Mo-SACs are highlighted, focusing on the microenvironment engineering of Mo atoms. Then, the representative achievements of their applications in various electrocatalytic reactions involving the N2, H2O, and CO2 cycles are summarized by combining experimental and computational results. Finally, prospects for the future development of Mo-SACs in electrocatalysis are provided and the key challenges that require further investigation and optimization are highlighted.

Carbon Dots with Spatially-Mediated-N/S-Co-Doping Enabling One-Year Stable Lubricant with Oil Leakage Detection Capability.

The dispersion stability of nano-lubricating additives is crucial for the shelf life of lubricant and its practical applications. Nitrogen-sulfur co-doped carbon dots (N,S@CDs) via a one-step hydrothermal method with nitropyrene and thiourea as raw materials are hereby presented. The N and S elements are selectively distributed throughout the entire carbon skeleton with a doping amount of 22.6 at%. The as-synthesized N,S@CDs exhibit excellent dispersion stability in PEG200 and maintain stability for over one year. The experiment results indicate that N,S@CDs significantly improve the anti-wear and friction reduction properties of PEG200, while the friction coefficient is reduced from 0.25 to 0.09 with 1.5 wt% N,S@CDs addition, and the wear volume, depth, and width are reduced by 68%, 52%, and 57%, respectively. The good lubrication performance is attributed to N,S@CDs excellent dispersion stability, enhanced filling and polishing effects, and complex tribochemical reactions caused by heteroatom doping to form a stable protective film on the worn surface. Furthermore, the as-prepared N,S@CDs exhibit intrinsic fluorescence intensity in PEG200 with the photoluminescence quantum yield (PLQY) of 12.5% and remain fluorescent stable during the long-term friction process, therefore the N,S@CDs have a potential application prospect in non-destructive detection of oil leakage via fluorescence labeling method.

Fabrication of Vanadium Oxide-encapsulated Hybrid Carbon Nanospheres for Enhanced Tribological Performance.

A new sulfur-containing carbon nanospheres encapsulated with vanadium oxide (V@SCN) is synthesized through a one-pot oxidation polymerization and then carbonization method. The prepared V@SCNs exhibit good dispersibility as a lubricant additive, which is owing to the inherited lipophilic organic functional groups in the sulfur-containing carbon shell derived from the carbonization of polythiophene. The agglomeration and precipitation of metals in the base oil are also avoided through the encapsulation of lipophilic carbon shells. The stress and thermal simulation results show that the vanadium oxide core bestows upon the carbon nanospheres enhanced load resistance and superior thermal conductivity, which contributes to their excellent tribological properties. Introducing 0.04M-V@SCN to the base oil leads to favorable tribological characteristics, such as a fourfold rise in extreme pressure capacity from 250 to 1050N, a reduction in friction coefficient from 0.2 to ≈0.1, and a substantial decrease in wear by 90.2%. The lubrication mechanism of V@SCNs as lubricant additive involves the formation of a robust protective film on the friction pair, which is formed via complex physical and chemical reactions with the friction pair during friction.

Pulsed Laser Manufactured Heteroatom Doped Carbon Dots via Heterocyclic Aromatic Hydrocarbons for Improved Tribology Performance.

Traditional laser-assisted method (top-down synthesis strategy) is applied in the preparation of carbon dots (CDs) by cutting larger carbon materials, which requires harsh conditions, and the size distribution of the CDs is seldom monodisperse. In this work, heteroatom-doped CDs, represented by N,S co-doped CDs (N,S-CDs), can be prepared successfully by pulsed laser irradiation of heterocyclic aromatic hydrocarbons-based small molecule compound solution. The friction coefficient (COF) of base oil PAO decreases from 0.650 to 0.093, and the wear volume reduces by 92.0% accompanied by 1 wt.% N,S-CDs addition, while the load-bearing capacity is improved from 100 to 950 N. The excellent lubrication performance is mainly attributed to the formation of a robust tribofilm via a tribochemical reaction between N,S-CDs and friction pairs, and the N,S-CDs can play a mending effect and polishing effect for worn surfaces. Furthermore, the lubricant containing heteroatom doped CDs are capable of being prepared in situ via pulsed laser irradiation of heterocyclic aromatic hydrocarbons in base oil, which can avoid the redispersed problem of nano-additive in base oil to maintain long-term dispersion, with COF of 0.103 and low wear volume ≈1.99 × 105 µm3 (76.9% reduction) even after standing for 9 months.

Tailoring the Molecular Planarity of Perylene Diimide-Based Third Component toward Efficient Ternary Organic Solar Cells.

Incorporating a third component into binary organic solar cells (b-OSCs) has provided a potential platform to boost power conversion efficiency (PCEs). However, gaining control over the non-equilibrium blend morphology via the molecular design of the perylene diimide (PDI)-based third component toward efficient ternary organic solar cells (t-OSCs) still remains challenging. Herein, two novel PDI derivatives are developed with tailored molecular planarity, namely ufBTz-2PDI and fBTz-2PDI, as the third component for t-OSCs. Notably, after performing a cyclization reaction, the twisted ufBTz-2PDI with an amorphous character transferred to the highly planar fBTz-2PDI followed by a semi-crystalline character. When incorporating the semi-crystalline fBTz-2PDI into the D18:L8-BO system, the resultant t-OSC achieved an impressive PCE of 18.56%, surpassing the 17.88% attained in b-OSCs. In comparison, the addition of amorphous ufBTz-2PDI into the binary system facilitates additional charge trap sites and results in a deteriorative PCE of 14.37%. Additionally, The third component fBTz-2PDI possesses a good generality in optimizing the PCEs of several b-OSCs systems are demonstrated. The results not only provided a novel A-DA'D-A motif for further designing efficient third component but also demonstrated the crucial role of modulated crystallinity of the PDI-based third component in optimizing PCEs of t-OSCs.

Surgical evidence-based comparison of [68Ga]Ga-FAPI-04 PET and MRI-DWI for assisting debulking surgery in ovarian cancer patients.

PURPOSE: Imaging assessment of abdominopelvic tumor burden is crucial for debulking surgery decision in ovarian cancer patients. This study aims to compare the efficiency of [68Ga]Ga-FAPI-04 FAPI PET and MRI-DWI in the preoperative evaluation and its potential impact to debulking surgery decision. METHODS: Thirty-six patients with suspected/confirmed ovarian cancer were enrolled and underwent integrated [68Ga]Ga-FAPI-04 PET/MRI. Nineteen patients (15 stage III-IV and 4 I-II stage) who underwent debulking surgery were involved in the diagnostic efficiency analysis. The images of [68Ga]Ga-FAPI-04 PET and MRI-DWI were visually analyzed respectively. Immunohistochemistry on FAP was performed in metastatic lesions to investigate the radiological missing of [68Ga]Ga-FAPI-04 PET as well as its different performance in primary debulking surgery (PDS) and interval debulking surgery (IDS) patients. Potential imaging impact on management was also studied in 35 confirmed ovarian cancer patients. RESULTS: [68Ga]Ga-FAPI-04 PET displayed higher sensitivity (76.8% vs.59.9%), higher accuracy (84.9% vs. 80.7%), and lower missing rate (23.2% vs. 40.1%) than MRI-DWI in detecting abdominopelvic metastasis. The diagnostic superiority of [68Ga]Ga-FAPI-04 PET is more obvious in PDS patients but diminished in IDS patients. [68Ga]Ga-FAPI-04 PET outperformed MRI-DWI in 70.8% abdominopelvic regions (17/24), which contained seven key regions that impact the resectability and surgical complexity. MRI-DWI hold advantage in the peritoneal surface of the bladder and the central tendon of the diaphragm. Of the contradictory judgments between the two modalities (14.9%), [68Ga]Ga-FAPI-04 PET correctly identified more lesions, particularly in PDS patients (73.8%). In addition, FAP expression was independent of lesion size and decreased in IDS patients. [68Ga]Ga-FAPI-04 PET changed 42% of surgical planning that was previously based on MRI-DWI. CONCLUSION: [68Ga]Ga-FAPI-04 PET is more efficient in assisting debulking surgery in ovarian cancer patients than MRI-DWI. Integrated [68Ga]Ga-FAPI-04 PET/MR imaging is a potential method for planning debulking surgery in ovarian cancer patients.

Preparation of Hydrophilic Hyper-Cross-Linked Polystyrene Nanospheres with Antibacterial for Improved Water Lubrication Performance.

The present study utilizes styrene as a raw material to prepare hyper-cross-linked polystyrene nanospheres (HPSs) through the Friedel-Crafts reaction, establishing stable covalent bond structures within the polymer chains. The hydrophilic polystyrene nanospheres─TMA@SHPSs were successfully synthesized via sulfonation and ion exchange reactions, demonstrating exceptional properties in reducing friction and wear. Compared with pure water, the addition of 4.0 wt % TMA@SHPSs results in a 62.2% reduction in the friction coefficient, accompanied by a significant decrease to 1.17 × 105 µm3 in wear volume. The results demonstrate that TMA@SHPSs, as water-based lubrication additives, generate composite protective films (tribo-chemical protective films and physical protective films) during the friction process, which effectively prevents direct contact between the friction pairs and achieves remarkable antifriction and antiwear effects. The results of the antimicrobial activity test indicate that TMA@SHPSs demonstrate exceptional antibacterial efficacy due to the bacteriostatic effect induced by hydration and the bactericidal properties of quaternary ammonium cations.

Fabrication of Ag Nanoparticle-Embedded Covalent Organic Frameworks for Oil Gel with Long-Term Stability and High Lubrication Performance.

In previous reports, covalent organic frameworks (COFs) have demonstrated significant potential as lubricant additives. Herein, we embedded Ag nanoparticles in the DT-COF (polycondensation polymer of 2,5-dihydroxyterephthalaldehyde and 4,4',4″-(1,3,5-triazine-2,4,6-triyl) trianiline) matrix via the ball milling method and utilized this composite (Ag@DT-COF) as an additive for supermolecule oil gel. The low molecular weight gelator effectively mitigates the dispersion challenges of COFs in lubricant oil, while the embedded Ag nanoparticles enhance the repairing effect and antipressure performance of the lubricant. The resulting Ag@DT-COF gel exhibits a reduction in the average friction coefficient and wear volume of base oil by 46.0% and 87.5%, respectively, and increases the load-carrying capacity to 750 N. The remarkable tribological properties are attributed to the easy adsorption of DT-COF, antiwear characteristic of Ag nanoparticles, and the gelator that ensures the long-term stability of oil gel.

Mechanochemical Synthesis of Thiadiazole Functionalized COF as Oil-Based Lubricant Additive for Reducing Friction and Wear.

In this work, the functionalized covalent organic framework (COF) was prepared via a convenient ball milling process. The aldehyde group terminated COF-F reacted with amino thiadiazole in the ball milling jar under mechanical forces; hence, the thiadiazole functionalized COF-F was obtained and denoted as Thdz@COF-F. The as-prepared Thdz@COF-F serves as an oil-based lubricant additive and exhibits remarkable tribological properties, which can reduce the average friction coefficient of base oil from 0.169 to 0.102 and decrease the wear volume by 87.0%. The antifriction and antiwear performances are mainly due to the repairing effect of Thdz@COF-F nanoparticles and the protective tribo-film that averts the direct contact of friction pairs. In addition, through the ball milling method, triazole and thiazole functionalized COF-F were also prepared and represented good lubrication performance, demonstrating the feasibility of this mechanochemical synthesis method for functionalized COFs.

Ferulic acid alleviates avermectin induced renal injury in carp by inhibiting inflammation, oxidative stress and apoptosis.

Avamectin (AVM), a macrolide antibiotic, is widely used in fisheries, agriculture, and animal husbandry, however, its irrational use poses a great danger to aquatic organisms. Ferulic acid (FA) is a natural chemical found in the cell walls of plants. It absorbs free radicals from the surrounding environment and acts as an antioxidant. However, the protective effect of FA against kidney injury caused by AVM has not been demonstrated. In this study, 60 carp were divided into the control group, AVM group (2.404 µg/L), FA+AVM group and FA group (400 mg/kg). Pathological examination, quantitative real-time PCR (qPCR), reactive oxygen species (ROS) and western blot were used to evaluate the preventive effect of FA on renal tissue injury after AVM exposure. Histological findings indicated that FA significantly reduced the swelling and infiltration of inflammatory cells in the kidney tissues of carp triggered by AVM. Dihydroethidium (DHE) fluorescent probe assay showed that FA inhibited the accumulation of kidney ROS. Biochemical results showed that FA significantly increased glutathione (GSH) content, total antioxidant capacity (T-AOC) and catalase (CAT) activity, and decreased intracellular malondialdehyde (MDA) content. In addition, western blot results revealed that the protein expression levels of Nrf2 and p-NF-κBp65 in the carp kidney were inhibited by AVM, but reversed by the FA. The qPCR results exhibited that FA significantly increased the mRNA levels of tgf-ß1 and il-10, while significantly down-regulated the gene expression levels of tnf-α, il-6 and il-1ß. These data suggest that FA can reduce oxidative stress and renal tissue inflammation induced by AVM. At the same time, FA inhibited the apoptosis of renal cells induced by AVM by decreasing the transcription level and protein expression level of Bax, and increasing the transcription level and protein expression level of Bcl2, PI3K and AKT. This study provides preliminary evidence for the theory that FA reduces the level of oxidative stress, inflammation response and kidney tissue damage caused by apoptosis in carp, providing a theoretical basis for the prevention and treatment of the AVM.

Sorting Out the Latest Advances in Separators and Pilot-Scale Microbial Electrochemical Systems for Wastewater Treatment: Concomitant Development, Practical Application, and Future Perspective.

To date, dozens of pilot-scale microbial fuel cell (MFC) devices have been successfully developed worldwide for treating various types of wastewater. The availability and configurations of separators are determining factors for the economic feasibility, efficiency, sustainability, and operability of these devices. Thus, the concomitant advances between the separators and pilot-scale MFC configurations deserve further clarification. The analysis of separator configurations has shown that their evolution proceeds as follows: from ion-selective to ion-non-selective, from nonpermeable to permeable, and from abiotic to biotic. Meanwhile, their cost is decreasing and their availability is increasing. Notably, the novel MFCs configured with biotic separators are superior to those configured with abiotic separators in terms of wastewater treatment efficiency and capital cost. Herein, a highly comprehensive review of pilot-scale MFCs (>100 L) has been conducted, and we conclude that the intensive stack of the liquid cathode configuration is more advantageous when wastewater treatment is the highest priority. The use of permeable biotic separators ensures hydrodynamic continuity within the MFCs and simplifies reactor configuration and operation. In addition, a systemic comparison is conducted between pilot-scale MFC devices and conventional decentralized wastewater treatment processes. MFCs showed comparable cost, higher efficiency, long-term stability, and significant superiority in carbon emission reduction. The development of separators has greatly contributed to the availability and usability of MFCs, which will play an important role in various wastewater treatment scenarios in the future.

Analysis of influencing factors and construction of prediction model for postoperative nausea and vomiting in patients undergoing laparoscopic sleeve gastrectomy: a single-center retrospective cohort study.

BACKGROUND: With the increasing number of bariatric surgeries, the high incidence of postoperative nausea and vomiting (PONV) associated with this surgery has also gradually attracted attention. Among the common bariatric surgery methods, patients undergoing sleeve gastrectomy (SG) have the highest incidence of nausea and vomiting. The mechanism of occurrence of PONV is very complex. This study aims to explore the influencing factors of PONV in patients undergoing laparoscopic sleeve gastrectomy (LSG) and construct a nomogram prediction model based on these factors. METHODS: With the approval of the Ethics Committee, the electronic medical records of patients who underwent LSG from July 2022 to May 2023 were collected retrospectively. RESULTS: A total of 114 patients with complete medical records who underwent LSG from July 2022 to May 2023 were included in this study. Among them, 46 patients developed PONV, resulting in a PONV incidence rate of 40.4%. Multivariate logistic regression analysis revealed that female gender, the use of inhalation anesthesia, and operation time ≥ 120 min were risk factors for PONV in LSG. Additionally, the use of more than two kinds of antiemetic drugs was identified as a protective factor. Based on these factors, a nomogram model was constructed. CONCLUSION: PONV in patients undergoing LSG is related to gender, type of anesthesia, duration of surgery, and combination therapy with antiemetic drugs. The nomogram prediction model constructed in this study demonstrates high accuracy and discrimination in predicting the occurrence of PONV in patients undergoing LSG.

Safety evaluation of single-sperm cryopreservation technique applied in intracytoplasmic sperm injection.

Intracytoplasmic sperm injection (ICSI) is a technique that directly injects a single sperm into the cytoplasm of mature oocytes. Here, we explored the safety of single-sperm cryopreservation applied in ICSI. This retrospective study enrolled 186 couples undergoing ICSI-assisted pregnancy. Subjects were allocated to the fresh sperm (group A)/single-sperm cryopreservation (group B) groups based on sperm type, with their clinical baseline/pathological data documented. We used ICSI-compliant sperm for subsequent in vitro fertilization and followed up on all subjects. The recovery rate/cryosurvival rate/sperm motility of both groups, the pregnancy/outcome of women receiving embryo transfer, and the delivery mode/neonatal-related information of women with successful deliveries were recorded. The clinical pregnancy rate, cumulative clinical pregnancy rate, abortion rate, ectopic pregnancy rate, premature delivery rate, live birth delivery rate, neonatal birth defect rate, and average birth weight were analyzed. The two groups showed no significant differences in age, body mass index, ovulation induction regimen, sex hormone [anti-Müllerian hormone (AMH)/follicle-stimulating hormone (FSH)/luteinizing hormone (LH)] levels, or oocyte retrieval cycles. The sperm recovery rate (51.72%-100.00%) and resuscitation rate (62.09% ± 16.67%) in group B were higher; the sperm motility in the two groups demonstrated no significant difference and met the ICSI requirements. Group B exhibited an increased fertilization rate, decreased abortion rate, and increased safety versus group A. Compared with fresh sperm, the application of single-sperm cryopreservation in ICSI sensibly improved the fertilization rate and reduced the abortion rate, showing higher safety.

Uncooled Mid-Infrared Sensing Enabled by Chip-Integrated Low-Temperature-Grown 2D PdTe2 Dirac Semimetal.

Next-generation mid-infrared (MIR) imaging chips demand free-cooling capability and high-level integration. The rising two-dimensional (2D) semimetals with excellent infrared (IR) photoresponses are compliant with these requirements. However, challenges remain in scalable growth and substrate-dependence for on-chip integration. Here, we demonstrate the inch-level 2D palladium ditelluride (PdTe2) Dirac semimetal using a low-temperature self-stitched epitaxy (SSE) approach. The low formation energy between two precursors facilitates low-temperature multiple-point nucleation (∼300 °C), growing up, and merging, resulting in self-stitching of PdTe2 domains into a continuous film, which is highly compatible with back-end-of-line (BEOL) technology. The uncooled on-chip PdTe2/Si Schottky junction-based photodetector exhibits an ultrabroadband photoresponse of up to 10.6 µm with a large specific detectivity. Furthermore, the highly integrated device array demonstrates high-resolution room-temperature imaging capability, and the device can serve as an optical data receiver for IR optical communication. This study paves the way toward low-temperature growth of 2D semimetals for uncooled MIR sensing.

Transcriptome and Metabolome Analyses of Leaves from Cutting Rejuvenation of Ancient Cinnamomum camphora.

Rejuvenation refers to the transition from the state of mature to juvenile. Many ancient Cinnamomum camphora have aged and died due to climatic and anthropic factors. Vegetative propagation can protect valuable germplasm resources. In this study, a 2000-year-old ancient C. camphora and its 2-year-old cutting plantlets were selected as experimental materials. The results indicated that the number of leaves with palisade tissue (Pal) cell layers was different between samples, with two layers in the rejuvenated leaves (RLs) and one layer in the mature leaves (MLs) and young leaves (YLs). Indole-3-acetic acid (IAA), isopentenyladenine (iP) and isopentenyladenosine (iPR) concentrations were significantly higher in RLs than in MLs and YLs, but the abscisic acid (ABA) concentration was lower. Targeted metabolome analysis identified 293 differentially accumulated metabolites (DAMs). Meanwhile, a total of 5241 differentially expressed genes (DEGs) were identified by transcriptome sequencing. According to the KEGG analysis, there were seven important enriched pathways in the MLs, RLs and YLs, including plant hormone signal transduction (57 DEGs), plant-pathogen interaction (56 DEGs) and MAPK signaling pathway-plant (36 DEGs). KEGG enrichment conjoint analyses of DEGs and DAMs identified 16 common pathways. Integrated analyses of cytological, hormone, metabolome and transcriptome elements can provide a research basis in regard to the rejuvenation regulatory mechanism of ancient C. camphora.

A Comprehensive Study to Determine the Residual Elimination Pattern of Major Metabolites of Amoxicillin-Sulbactam Hybrid Molecules in Rats by UPLC-MS/MS.

Amoxicillin and sulbactam are widely used in animal food compounding. Amoxicillin-sulbactam hybrid molecules are bicester compounds made by linking amoxicillin and sulbactam with methylene groups and have good application prospects. However, the residual elimination pattern of these hybrid molecules in animals needs to be explored. In the present study, the amoxicillin-sulbactam hybrid molecule (AS group) and a mixture of amoxicillin and sulbactam (mixture group) were administered to rats by gavage, and the levels of the major metabolites of amoxicillin, amoxicilloic acid, amoxicillin diketopiperazine, and sulbactam were determined by UPLC-MS/MS. The residue elimination patterns of the major metabolites in the liver, kidney, urine, and feces of rats in the AS group and the mixture group were compared. The results showed that the total amount of amoxicillin, amoxicilloic acid, amoxicillin diketopiperazine, and the highest concentration of sulbactam in the liver and kidney samples of the AS group and the mixture group appeared at 1 h after drug withdrawal. Between 1 h and 12 h post discontinuation, the total amount of amoxicillin, amoxicilloic acid, and amoxicillin diketopiperazine in the two tissues decreased rapidly, and the elimination half-life of the AS group was significantly higher than that in the mixture group (p < 0.05); the residual amount of sulbactam also decreased rapidly, and the elimination half-life was not significantly different (p > 0.05). In 72 h urine samples, the total excretion rates were 60.61 ± 2.13% and 62.62 ± 1.73% in the AS group and mixture group, respectively. The total excretion rates of fecal samples (at 72 h) for the AS group and mixture group were 9.54 ± 0.26% and 10.60 ± 0.24%, respectively. These results showed that the total quantity of amoxicillin, amoxicilloic acid, and amoxicillin diketopiperazine was eliminated more slowly in the liver and kidney of the AS group than those of the mixture group and that the excretion rate through urine and feces was essentially the same for both groups. The residual elimination pattern of the hybrid molecule in rats determined in this study provides a theoretical basis for the in-depth development and application of hybrid molecules, as well as guidelines for the development of similar drugs.

The TaGW2-TaSPL14 module regulates the trade-off between tiller number and grain weight in wheat.

IDEAL PLANT ARCHITECTURE1 (IPA1) is a pivotal gene controlling plant architecture and grain yield. However, little is known about the effects of Triticum aestivum SQUAMOSA PROMOTER-BINDING-LIKE 14 (TaSPL14), an IPA1 ortholog in wheat, on balancing yield traits and its regulatory mechanism in wheat (T. aestivum L.). Here, we determined that the T. aestivum GRAIN WIDTH2 (TaGW2)-TaSPL14 module influences the balance between tiller number and grain weight in wheat. Overexpression of TaSPL14 resulted in a reduced tiller number and increased grain weight, whereas its knockout had the opposite effect, indicating that TaSPL14 negatively regulates tillering while positively regulating grain weight. We further identified TaGW2 as a novel interacting protein of TaSPL14 and confirmed its ability to mediate the ubiquitination and degradation of TaSPL14. Based on our genetic evidence, TaGW2 acts as a positive regulator of tiller number, in addition to its known role as a negative regulator of grain weight, which is opposite to TaSPL14. Moreover, combinations of TaSPL14-7A and TaGW2-6A haplotypes exhibit significantly additive effects on tiller number and grain weight in wheat breeding. Our findings provide insight into how the TaGW2-TaSPL14 module regulates the trade-off between tiller number and grain weight and its potential application in improving wheat yield.