RESUMEN
The redox transition between iron and its oxides is of the utmost importance in heterogeneous catalysis, biological metabolism, and geological evolution. The structural characteristics of this reaction may vary based on surrounding environmental conditions, giving rise to diverse physical scenarios. In this study, we explore the atomic-scale transformation of nanosized Fe3O4 under ambient-pressure H2 gas using in-situ environmental transmission electron microscopy. Our results reveal that the internal solid-state reactions dominated by iron diffusion are coupled with the surface reactions involving gaseous O or H species. During reduction, we observe two competitive reduction pathways, namely Fe3O4 â FeO â Fe and Fe3O4 â Fe. An intermediate phase with vacancy ordering is observed during the disproportionation reaction of Fe2+ â Fe0 + Fe3+, which potentially alleviates stress and facilitates ion migration. As the temperature decreases, an oxidation process occurs in the presence of environmental H2O and trace amounts of O2. A direct oxidation of Fe to Fe3O4 occurs in the absence of the FeO phase, likely corresponding to a change in the water vapor content in the atmosphere. This work elucidates a full dynamical scenario of iron redox under realistic conditions, which is critical for unraveling the intricate mechanisms governing the solid-solid and solid-gas reactions.
RESUMEN
The interfacial species-built local environments on Cu surfaces impact the CO2 electroreduction process significantly in producing value-added multicarbon (C2+) products. However, intricate interfacial dynamics leads to a challenge in understanding how these species affect the process. Herein, with ab initio molecular dynamics (AIMD) and finite element method (FEM) simulations, we reveal that the highly concentrated interfacial species, including the *CO, hydroxide, and K+, could synergistically promote the C-C coupling on the one-dimensional (1D) porous hollow structure regulated interfacial environment. The Cu-Ag tandem catalyst was then synthesized with the as-designed structure, exhibiting a high C2+ Faradaic efficiency of 76.0% with a partial current density of 380.0 mA cm-2 in near-neutral electrolytes. Furthermore, in situ Raman spectra validate that the 1D porous structure regulates the concentration of interfacial CO intermediates and ions to increase *CO coverage, local pH value, and ionic field, promoting the CO2-to-C2+ activity. These results provide insights into the design of practical ECR electrocatalysts by regulating interfacial species-induced local environments.
RESUMEN
Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi-1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.
RESUMEN
The alkaline hydrogen oxidation reaction (HOR) involves the coupling of adsorbed hydrogen (Had) and hydroxyl (OHad) species and is thus orders of magnitude slower than that in acid media. According to the Sabatier principle, developing electrocatalysts with appropriate binding energy for both intermediates is vital to accelerating the HOR though it is still challenging. Herein, we propose an unconventional bilateral compressive strained Ni-Ir interface (Ni-Ir(BCS)) as efficient synergistic HOR sites. Density functional theory (DFT) simulations reveal that the bilateral compressive strain effect leads to the appropriate adsorption for both Had and OHad, enabling their coupling thermodynamically spontaneous and kinetically preferential. Such Ni-Ir(BCS) is experimentally achieved by embedding sub-nanometer Ir clusters in graphene-loaded high-density Ni nanocrystals (Ni-Ir(BCS)/G). As predicted, it exhibits a HOR mass activity of 7.95 and 2.88 times those of commercial Ir/C and Pt/C together with much enhanced CO tolerance, respectively, ranking among the most active state-of-the-art HOR catalysts. These results provide new insights into the rational design of advanced electrocatalysts involving coordinated adsorption and activation of multiple reactants.
RESUMEN
H2O2 photosynthesis has attracted great interest in harvesting and converting solar energy to chemical energy. Nevertheless, the high-efficiency process of H2O2 photosynthesis is driven by the low H2O2 productivity due to the recombination of photogenerated electron-hole pairs, especially in the absence of a sacrificial agent. In this work, we demonstrate that ultrathin ZnIn2S4 nanosheets with S vacancies (Sv-ZIS) can serve as highly efficient catalysts for H2O2 photosynthesis via O2/H2O redox. Mechanism studies confirm that Sv in ZIS can extend the lifetimes of photogenerated carriers and suppress their recombination, which triggers the O2 reduction and H2O oxidation to H2O2 through radical initiation. Theoretical calculations suggest that the formation of Sv can strongly change the coordination structure of ZIS, modulating the adsorption abilities to intermediates and avoiding the overoxidation of H2O to O2 during O2/H2O redox, synergistically promoting 2e- O2 reduction and 2e- H2O oxidation for ultrahigh H2O2 productivity. The optimal catalyst displays a H2O2 productivity of 1706.4 µmol g-1 h-1 under visible-light irradiation without a sacrificial agent, which is â¼29 times higher than that of pristine ZIS (59.4 µmol g-1 h-1) and even much higher than those of reported photocatalysts. Impressively, the apparent quantum efficiency is up to 9.9% at 420 nm, and the solar-to-chemical conversion efficiency reaches â¼0.81%, significantly higher than the value for natural synthetic plants (â¼0.10%). This work provides a facile strategy to separate the photogenerated electron-hole pairs of ZIS for H2O2 photosynthesis, which may promote fundamental research on solar energy harvest and conversion.
RESUMEN
An asymmetric wound dressing acts as a skin-like structure serves as a protective barrier between a wound and its surroundings. It allows for the absorption of tissue fluids and the release of active substances at the wound site, thus speeding up the healing process. However, the production of such wound dressings requires the acquisition of specialized tools, expensive polymers, and solvents that contain harmful byproducts. In this study, an asymmetric bacterial cellulose (ABC) wound dressing using starch as a porogen has been developed. By incorporating silver-metal organic frameworks (Ag-MOF) and curcumin into the ABC membrane, the wound dressing gains antioxidant, reactive oxygen species (ROS) scavenging, and anti-bacterial activities. Compared to BC-based wound dressings, this dressing promotes efficient dissolution and controlled release of curcumin and silver ions. In a full-thickness skin defect model, wound dressing not only inhibits the growth of bacteria on infected wounds but also regulates the release of curcumin to reduce inflammation and promote the production of epithelium, blood vessels, and collagen. Consequently, this dressing provides superior wound treatment compared to BC-based dressing.
Asunto(s)
Curcumina , Plata , Plata/química , Curcumina/farmacología , Curcumina/química , Antibacterianos/farmacología , Antibacterianos/química , Cicatrización de Heridas , Celulosa/química , Antiinflamatorios/farmacologíaRESUMEN
BACKGROUND: There is few evidence of right ventricular (RV) function in fetuses with gestational diabetes mellitus (GDM). Therefore, the aim of this study was to assess the RV function of fetuses using routine and two-dimensional speckle-tracking echocardiography (2D STE) to determine the effects of well-controlled GDM in the third trimester. METHODS: We used a Philips Epiq7C ultrasound instrument to obtain RV data sets from 63 subjects from July 2019 to February 2022. We compared the free wall thickness (FWT), fractional area change (FAC), Tei index (TEI), tricuspid annular plane systolic excursion (TAPSE) and free wall longitudinal strain(FWLS)of the RV in mothers with well-controlled GDM and normal gestational age-matched fetuses. RESULTS: 63 third trimester fetuses (32 GDM; 31 healthy controls) met the enrolment criteria. Significant differences in fetal RV were detected between the GDM and control groups for the FAC (36.35 ± 6.19 vs. 41.59 ± 9.11; P = 0.008) and the FWLS (-18.28 ± 4.23 vs. -20.98 ± 5.49; P = 0.021). There was a significant difference among the segmental strains of the base, middle and apex of the RV free wall in the healthy controls (P = 0.003), but in the GDM group, there was no statistical difference (p = 0.076). RV FWLS had a strong correlation with FAC (r = 0.467; P = 0.0002). CONCLUSIONS: In well-controlled GDM, there was measurable fetal RV hypertrophy and significant systolic function decline, indicating the presence of ventricular remodeling and dysfunction. 2D-STE can evaluate the RV free wall contraction in a more comprehensive way.
Asunto(s)
Diabetes Gestacional , Disfunción Ventricular Derecha , Femenino , Humanos , Embarazo , Diabetes Gestacional/diagnóstico por imagen , Ventrículos Cardíacos/diagnóstico por imagen , Ecocardiografía/métodos , Sístole , Función Ventricular DerechaRESUMEN
Developing highly active, selective, and stable electrocatalysts for the carbon dioxide reduction reaction (CO2RR) is crucial to establish a CO2 conversion system for industrial implementation and, therefore, to realize an artificially closed carbon loop. This can only be achieved through the rational material design based upon the knowledge of the operational active site at the molecular scale. Enlightened by theoretical screening, herein, we for the first time manipulate a novel Ni-Cu atomic pair configuration toward improved CO2RR performance. Systematic characterizations and theoretical modeling reveal that the secondary Cu metal incorporation positively shifts the Ni 3d orbital energy to the Fermi level and thus accelerates the rate-determining step, *COOH formation. In addition, the intrinsic inactivity of Cu toward the competing hydrogen evolution reaction causes a considerable reaction barrier for water dissociation on the Ni-Cu moiety. Due to these attributes, the as-developed Ni/Cu-N-C catalyst exhibits excellent catalytic activity and selectivity, with a record-high turnover frequency of 20,695 h-1 at -0.6 V (vs RHE) and a maximum Faradaic efficiency of 97.7% for CO production. Furthermore, the dynamic structure evolution monitored by operando X-ray absorption fine-structure spectroscopy unveils the interaction between the Ni center and CO2 molecules and the synergistic effect of the Ni-Cu atomic pair on CO2RR activity.
RESUMEN
In this paper, a wavelet convolutional neural network (WNN) consisting of a one-dimensional (1D) convolutional neural network and a self-adaptive wavelet neural network has been proposed and demonstrated experimentally for temperature measurement in a Brillouin optical time domain reflectometry (BOTDR) system. Based on the analysis of the system noise, it follows the Gaussian white noise distribution along the time-related sensing distance. The impact of the noise in time-domain on the measured Brillouin gain spectra (BGSs) could be neglected, so that the BGSs in the fiber can be regarded as a series of 1D input data of the proposed WNN. Different self-adaptive wavelet activation functions connected to each output of the full-connection network are adopted to realize the multi-scaled analysis and the scale translation, which can obtain more local characteristics in frequency-domain. The output extracted by the WNN is Brillouin frequency shift (BFS), which presents linearity correlation to the actual temperature. Considering the multi-parameters including different frequency ranges, signal-to-noise-ratios (SNRs), BFSs and spectral widths (SWs), a general model of the proposed WNN is trained to handle more extreme cases, in which it doesn't require retraining for different single-mode (SM) optical fibers in BOTDR sensing system. The performances of the WNN are compared with other two techniques, the Lorentzian curve fitting based on Levenberg-Marquardt (LM) algorithm and the basic neural network (NN) containing input and output layers together with two hidden layers. Both the simulated and measured results show that the WNN has better robustness and flexibility than the LM and the NN. Besides, the computational accuracy of the WNN is improved and the fluctuation of that is slighter, especially when the SNR is less than 11 dB. Moreover, the WNN takes approximately 0.54 s to measure the temperature from the 18,000 collected BGSs transmitted through the 18 km SM optical fiber. The calculating time of the WNN is greatly reduced by three orders of magnitude in comparison with that of the LM, and is comparable to that of the NN. It proves that the proposed WNN may provide a feasible or even better scheme for the robust and fast temperature measurement in BOTDR system.
RESUMEN
Single atom tailored metal nanoparticles represent a new type of catalysts. Herein, we demonstrate a single atom-cavity coupling strategy to regulate performance of single atom tailored nano-catalysts. Selective atomic layer deposition (ALD) was conducted to deposit Ru single atoms on the surface concavities of PtNi nanoparticles (Ru-ca-PtNi). Ru-ca-PtNi exhibits a record-high activity for methanol oxidation reaction (MOR) with 2.01â A mg-1 Pt . Also, Ru-ca-PtNi showcases a significant durability with only 16 % activity loss. Operando electrochemical Fourier transform infrared spectroscopy (FTIR) and theoretical calculations demonstrate Ru single atoms coupled to cavities accelerate the CO removal by regulating d-band center position. Further, the high diffusion barrier of Ru single atoms in concavities accounts for excellent stability. The developed Ru-ca-PtNi via single atom-cavity coupling opens an encouraging pathway to design highly efficient single atom-based (electro)catalysts.
RESUMEN
SUMOylation of sarcoplasmic/endoplasmic reticulum Ca2+ ATPase 2a (SERCA2a) has been shown to play a critical role in the abnormal Ca2+ cycle of heart failure. Ginsenoside Rg3 (Rg3), the main active constituent of Panax ginseng, exerts a wide range of pharmacological effects in cardiovascular diseases. However, the effect of Rg3 on abnormal Ca2+ homeostasis in heart failure has not been reported. In this study, we showed a novel role of Rg3 in the abnormal Ca2+ cycle in cardiomyocytes of mice with heart failure. Among mice undergoing transverse aortic constriction, animals that received Rg3 showed improvements in cardiac function and Ca2+ homeostasis, accompanied by increases in the SUMOylation level and SERCA2a activity. In an isoproterenol (ISO)-induced cell hypertrophy model, Rg3 reduced the ISO-induced Ca2+ overload in HL-1 cells. Gene knockout of SUMO1 in mice inhibited the cardioprotective effect of Rg3, and SUMO1 knockout mice that received Rg3 did not exhibit improved Ca2+ homeostasis in cardiomyocytes. Additionally, mutation of the SUMOylation sites of SERCA2a blocked the positive effect of Rg3 on the ISO-induced abnormal Ca2+ cycle in HL-1 cells, and was accompanied by an abnormal endoplasmic reticulum stress response and generation of ROS. Our data demonstrated that Rg3 has a positive effect on the abnormal Ca2+ cycle in the cardiomyocytes of mice with heart failure. SUMO1 is an important factor that mediates the protective effect of Rg3. Our findings suggest that drug intervention by regulating the SUMOylation of SERCA2a can provide a novel therapeutic strategy for the treatment of heart failure.
Asunto(s)
Cardiotónicos/uso terapéutico , Ginsenósidos/uso terapéutico , Insuficiencia Cardíaca/tratamiento farmacológico , ATPasas Transportadoras de Calcio del Retículo Sarcoplásmico/metabolismo , Sumoilación/efectos de los fármacos , Animales , Calcio/metabolismo , Cardiotónicos/farmacología , Línea Celular , Ginsenósidos/farmacología , Insuficiencia Cardíaca/metabolismo , Insuficiencia Cardíaca/patología , Insuficiencia Cardíaca/fisiopatología , Masculino , Ratones Endogámicos C57BL , Ratones Noqueados , Miocardio/patología , Miocitos Cardíacos/efectos de los fármacos , Miocitos Cardíacos/patología , Proteína SUMO-1/genética , Proteína SUMO-1/metabolismo , Función Ventricular Izquierda/efectos de los fármacosRESUMEN
As key equipment in modern industry, it is important to diagnose and predict the health status of bearings. Data-driven methods for remaining useful life (RUL) prognostics have achieved excellent performance in recent years compared to traditional methods based on physical models. In this paper, we propose a novel data-driven method for predicting the remaining useful life of bearings based on a deep graph convolutional neural network with spatiotemporal domain convolution. This network uses the average sliding root mean square (ASRMS) as the health factor to identify the healthy and degraded states, and then uses correlation coefficient analysis on the hybrid features of the degraded data to construct a spatial graph according to the strength of the correlation between the obtained features. In the time domain, we introduce historical data as the input to the temporal convolution. After the data are processed by the spatial map and the temporal dimension, we perform the prediction of the remaining useful life. The experimental results show the accuracy of the method.
Asunto(s)
Modelos Teóricos , Redes Neurales de la Computación , PronósticoRESUMEN
Direct conversion of bulk metal or nanoparticles into metal single atoms under thermal pyrolysis conditions is a highly efficient and promising strategy to fabricate single-atom catalysts (SACs). Usually, nitrogen-doped carbon is used as the anchoring substrate to capture the migrating metal ion species at high temperatures, and stable isolated SACs with nitrogen coordination are formed during the process. Herein, we report unexpected oxygen-coordinated metal single-atom catalysts (Fe-, Co-, Ni-, Mn-SACs) with high loadings (above 10â wt %) through direct transformation of metal oxide nanoparticles (Fe-, Co-, Ni-, Mn-NPs) in an inert atmosphere at 750 °C for 2â h. The atomic dispersion of metal single atoms and their coordinated structures were confirmed by aberration-corrected scanning transmission electron microscopy and X-ray absorption fine structures. In addition, the dynamic process of nanoparticles to atoms was directly observed by inâ situ transmission electron microscopy. The as-prepared Fe SAC exhibited high activity and superior selectivity for catalytic oxidation of benzene to phenol with hydrogen peroxide.
RESUMEN
Creating high-density durable bifunctional active sites in an air electrode is essential but still challenging for a long-life rechargeable zinc-air battery with appealing power density. Herein, we discover a general strategy mediated by metastable rock salt oxides for achieving high-density well-defined transition-metal nanocrystals encapsulated in N-doped carbon shells (M@NC) which are anchored on a substrate by a porous carbon network as highly active and durable bifunctional catalytic sites. Small-size (15 ± 5 nm) well-dispersed Co2Fe1@NC in a high density (metal loading up to 54.0 wt %) offers the zinc-air battery a record power density of 423.7 mW cm-2. The dual protection from the complete graphitic carbon shells and the anchoring of the outer carbon network make Co2Fe1@NC chemically and mechanically durable, giving the battery a long cycling life. Systematic in-situ temperature-dependent characterizations as well as DFT modeling rationalize the rock salt oxide-mediated process and its indispensable role in achieving high-density nanosized M@NC. These findings open up opportunities for designing efficient electrocatalysts for high-performance Zn-air batteries and diverse energy devices.
RESUMEN
The crystal phase of metal nanocatalysts significantly affects their catalytic performance. Cu-based nanomaterials are unique electrocatalysts for CO2 reduction reaction (CO2RR) to produce high-value hydrocarbons. However, studies to date are limited to the conventional face-centered cubic (fcc) Cu. Here, we report a crystal phase-dependent catalytic behavior of Cu, after the successful synthesis of high-purity 4H Cu and heterophase 4H/fcc Cu using the 4H and 4H/fcc Au as templates, respectively. Remarkably, the obtained unconventional crystal structures of Cu exhibit enhanced overall activity and higher ethylene (C2H4) selectivity in CO2RR compared to the fcc Cu. Density functional theory calculations suggest that the 4H phase and 4H/fcc interface of Cu favor the C2H4 formation pathway compared to the fcc Cu, leading to the crystal phase-dependent C2H4 selectivity. This study demonstrates the importance of crystal phase engineering of metal nanocatalysts for electrocatalytic reactions, offering a new strategy to prepare novel catalysts with unconventional phases for various applications.
RESUMEN
Fully utilizing solar energy for catalysis requires the integration of conversion mechanisms and therefore delicate design of catalyst structures and active species. Herein, a MOF crystal engineering method was developed to controllably synthesize a copper-ceria catalyst with well-dispersed photoactive Cu-[O]-Ce species. Using the preferential oxidation of CO as a model reaction, the catalyst showed remarkably efficient and stable photoactivated catalysis, which found practical application in feed gas treatment for fuel cell gas supply. The coexistence of photochemistry and thermochemistry effects contributes to the high efficiency. Our results demonstrate a catalyst design approach with atomic or molecular precision and a combinatorial photoactivation strategy for solar energy conversion.
RESUMEN
Two-dimensional (2D) MoS2, which has great potential for optoelectronic and other applications, is thermodynamically stable and hence easily synthesized in its semiconducting 2H phase. In contrast, growth of its metastable 1T and 1T' phases is hampered by their higher formation energy. Here we use theoretical calculations to design a potassium (K)-assisted chemical vapour deposition method for the phase-selective growth of 1T' MoS2 monolayers and 1T'/2H heterophase bilayers. This is realized by tuning the concentration of K in the growth products to invert the stability of the 1T' and 2H phases. The synthesis of 1T' MoS2 monolayers with high phase purity allows us to characterize their intrinsic optical and electrical properties, revealing a characteristic in-plane anisotropy. This phase-controlled bottom-up synthesis offers a simple and efficient way of manipulating the relevant device structures, and provides a general approach for producing other metastable-phase 2D materials with unique properties.
RESUMEN
The residual DNA derived from host cells in antibody drugs have potential safety risks. In this paper, the antibody in the test sample was removed by magnetic bead separation method, and the residual DNA were quantitatively determined by Q-PCR method. The residual DNA in the sample was analyzed according to the standard curve. We validated the species specificity, accuracy, precision, quantitative restrictions, reproducibility of this method. The results showed the linearrange was of 1â¯×â¯10-1ï½1â¯×â¯102â¯pg/µL and the curve linear was good, this method can specifically detect CHO cell DNA. Compared with the method of extracting residual DNA by magnetic beads, the method has the advantages of simplicity, rapidity and low cost, and can be used for quantitative determination of the residual host cell DNA in antibody drugs producted by CHO cells.
Asunto(s)
Anticuerpos Monoclonales/análisis , ADN/análisis , Reacción en Cadena en Tiempo Real de la Polimerasa , Proteína Estafilocócica A/química , Animales , Anticuerpos Monoclonales/química , Células CHO , Cricetulus , ADN/genética , Fenómenos MagnéticosRESUMEN
Two-dimensional (2D) PtSe2 shows the most prominent layer-dependent electrical properties among various 2D materials and high catalytic activity for hydrogen evolution reaction (HER), and therefore, it is an ideal material for exploring the structure-activity correlations in 2D systems. Here, starting with the synthesis of single-crystalline 2D PtSe2 with a controlled number of layers and probing the HER catalytic activity of individual flakes in micro electrochemical cells, we investigated the layer-dependent HER catalytic activity of 2D PtSe2 from both theoretical and experimental perspectives. We clearly demonstrated how the number of layers affects the number of active sites, the electronic structures, and electrical properties of 2D PtSe2 flakes and thus alters their catalytic performance for HER. Our results also highlight the importance of efficient electron transfer in achieving optimum activity for ultrathin electrocatalysts. Our studies greatly enrich our understanding of the structure-activity correlations for 2D catalysts and provide new insight for the design and synthesis of ultrathin catalysts with high activity.
RESUMEN
As a source of clean energy, a reliable hydrogen evolution reaction (HER) requires robust and highly efficient catalysts. Here, by combining chemical vapor transport and Li-intercalation, we have prepared a series of 1T'-phase ReS2 xSe2(1- x) ( x = 0-1) nanodots to achieve high-performance HER in acid medium. Among them, the 1T'-phase ReSSe nanodot exhibits the highest hydrogen evolution activity, with a Tafel slope of 50.1 mV dec-1 and a low overpotential of 84 mV at current density of 10 mA cm-2. The excellent hydrogen evolution activity is attributed to the optimal hydrogen absorption energy of the active site induced by the asymmetric S vacancy in the highly asymmetric 1T' crystal structure.